Public Works Department-PWD has published Supply And Fixing Of Furniture Items ( Complete Job ) For Jkpdd Data Centre At Bemina Sgr . . Submission Date for this Tender is 24-02-2020. Furnishing Work Tenders in srinagar Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Name of Work: Supply and fixing of Furniture items (complete job) for JKPDD Data Centre at Bemina Sgr. Estd Cost = Rs. 33.60 Lacs | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Office Table (small size)Providing and Placing a Table of size shall be 1365 Width x 680 Depth x 735 Height . The top panels shall be made from 18 +/- 0.5 mm thick Pre - laminated boards as per with 2 mm thick PVC edge banding on all sides . Understructure shall be made from 0.9 mm +/- 0.09 mm thick powder coated 50 microns (+/-10) CRCA MS. Tubular Frame shall be dia. 25.4 +/- 0.3 mm x 1.2 +/- 0.096 mm thick MS ERW tube .Modesty panel shall be made from 1.0 +/- 0.09 mm thick powder coated 50 microns (+/- 10). The Storage shall be having shell 0.5 +/- 0.07 mm thick CRCA MS plus drawer tray 0.5 +/- 0.07 mm thick CRCA MS plus drawer front 0.8 +/- 0.1 mm thick CRCA MS . Also there should be 10 lever cam lock plus handles built in plastic. Approved Make Herman Miller/ BP Ergo/ Godrej/Rockworth/ Pen workers Mumbai/ space designs India/Govt Registered companies of equivalent make and quality | 5 | No | |
| 2 | 2 | Revolving Chair High Back:-Providing and placing Chair having seat e made up of 1.2cm thick hot pressed plywood and upholstered with synthetic leather and moulded polyurethane foam. The back should be made up 1.2cm thick hot pressed plywood upholstered with replaceable synthetic leather upholstery covers and moulded polyurethane foam. The moulded polyurethane foam should be of density 45kg/m³. The dimensions of seat should be- 51.0cm(W) x 48.0cm(D) and of back should be 48.0cm(W) x 76.0cm(H). The armrest top should be made of moulded polyurethane and mounted on to a drop lift height adjustable type M.S tubular armrest support chrome plated.The mechanism of the chair should have following features : 360° revolving type, Knee tilt synchro mechanism, Tilt tension adjustment, Single point control, 4 position locking with anti shock feature, Seat depth adjustment of 6.0+/-0.5cm should be locked in 6 positions. The backrest should consists of a sliding up down mechanism, Which may be adjusted in the range of 7.5cm and should be locked in 4 positions for correct position of lumber support. The chair should be provided with pneumatic height adjustment which should have stroke of 9.0 cm. The pedestial should be fabricated from 0.2cm thick HR sheet, chrome plated and assembled with injection moulded black polypropylene hub cap. The size of the pedestal should be 66.0 cm . The twin wheel castors should be made black nylon. Overall dimensions of Chair should be, Width of Chair - 76.0cm, Depth of Chair - 76.0cm as measured from pedestal below. Height from ground - min 101.5 to max 117.5cm. Seat height - min 46.9 to max 55.9cm. Dimensions tolerance / variations should be within +/- 1 cm. Approved Make Herman Miller/ BP Ergo/ Godrej/Rockworth/ Pen workers Mumbai/ space designs India/Govt Registered companies of equivalent make and quality | 10 | No | |
| 3 | 3 | Revolving Chair Mid Back:- Providing and placing Chair having seat made up of 1.2cm thick hot pressed plywood and upholstered with synthetic leather and moulded polyurethane foam. The back should be made up 1.2cm thick hot pressed plywood upholstered with replaceable synthetic leather upholstery covers and moulded polyurethane foam. The moulded polyurethane foam should be of density 45kg/m ³. The dimensions of seat should be- 51.0cm(W) x 48.0cm(D) and of back should be 48.0cm(W) x 64.5Cm(H). The armrest top should be made of moulded polyurethane and mounted on to a drop lift height adjustable type M.S tubular armrest support chrome plated. The armrest height should be adjustable. The mechanism of the chair should have following features : 360° revolving type, Knee tilt synchro mechanism, Tilt tension adjustment, Single point control, 4 position locking with anti shock feature, Seat/Back tilting ratio of 1:2. should be locked in 6 positions. The backrest should consists of a sliding up down mechanism, Which can be adjusted in the range of 7.5cm and should be locked in 4 positions for correct position of lumber support.The chair should be provided with pneumatic height adjustment which should have stroke of 9.0 cm. The pedestial should be fabricated from 0.2cm thick HR sheet, chrome plated and assembled with injection moulded black polypropylene hub cap. The size of the pedestal should be 66 cm. The twin wheel castors should be made black nylon. Overall dimensions of Chair should be, Width of Chair - 76.0cm, Depth of Chair - 76.0cm as measured from pedestal below. Height from ground - min 89.0 to max 105.0cm. Seat height - min 46.5 to max 55.5cm. Dimensions tolerance / variations should be within +/- 1 cm. Approved Make Herman Miller/ BP Ergo/ Godrej/Rockworth/ Pen workers Mumbai/ space designs India/Govt Registered companies of equivalent make and quality | 25 | No | |
| 4 | 4 | Computer Table:- Providing and placing Computer table of size 1200 Width mm x 600 Depth mm x 750 Height mm . Table top shall be 18 mm PPB with 35 KGS , shelf shall be 12.5 KGS drawer shall be 506 KGS. The table top shall be 18 mm prelam particle board, 3 mm prelam MDF board. Metal parts shall be BM Slide For Keyboard plus castor mounting table plus locking bracket plus angle clit. Hardware shall be Screw, KD fitting, Wooden Dowel, PVC ibserts. Construction shall be KD fitting, Wooden dowel & Angle Clit. 'Approved Make Herman Miller/ BP Ergo/ Godrej/Rockworth/ Pen workers Mumbai/ space designs India/Govt Registered companies of equivalent make and quality | 10 | No | |
| 5 | 5 | Personal Locker:- Providing and placing 4 Door personal lockers Overall size should be 380mm(W)x450mm(D)x1830mm(H). Stack ability should have add - on units that may be stacked width wise to form bank of lockers having common side panel. Locking should have 10 Lever cam lock with lock lever plus option of hasp arrangement. Material should be CRCA 0.6 mm thickness. Construction should be Rigid Knockdown construction; shelf should be uniformly distributed load capacity per each shelf level is 35 Kg maximum. Finish should be epoxy polyester powder coated to the thickness of 50 microns. Handle/Label holder should be Aesthetically appealing Snap fit ABS plastichandle. Ventilation should be attractive punched pattern for ventilation. Approved Make Herman Miller/ BP Ergo/ Godrej/ Rockworth/ Pen workers Mumbai/ space designs India/Govt Registered companies of equivalent make and quality | 2 | No | |
| 6 | 6 | Auditorium Chair:- Providing and placing Auditorium Chair with writing pad having Seat assembly made of polyurethane foam moulded with M.S. tublar frame insert which is upholstered with fabric. The insert should be tubular frame made of 1.9 ± 0.02 x0.16 ±0.013cm thk MS. E.R.W round tube with flexible support straps running across the length and width of the frame .The Seat shold have an auto-tipup feature making it stay in position when not in use enabling clear row passage. SeatSize : 45.5cm x 46.5cm. The back should have a flexi back mechanism. It should of polyurethane foam moulded with M.S. tubular frame insert, upholstered with fabric and has plastic back cover. The insert should be a tubular frame made of 01.9 ±0.02cm x 0.16±0.013 cm thk MS. E.R.W round tube with flexible support straps running across the length and width of the frame. Approx. Back Size for High Back- 45.5cm (W) x 82.4cm (H) and for Mid Back- 45.5cm (W) x 70.4cm (H). 3. High Resilience Polyurethane foam should be moulded with density = 45 +/-3 kg/m3. The chair will rest on the ground on two side panel/aisle panel frames fabricated from 0.12 ±0.020cm thk CR steel sheet which is cladded with fabric upholstery. The side frame is grouted to the floor using 2 nos. of anchors for each panel through 0.3 ± 0.05cm thk HR steel base plate. The armrest should be made up of solid beech wood with clear lacquer coat. Ther armrest should be fitted with side panel with a concealed zinkplated hinge . The desklet should be made of 1.8 ±0.05cm thk. pre-laminated particleboard with in-situ moulded Polypropylene edging all around. Desklet Top should be mounted on High pressure die-cast aluminium arm through metal bracket 0.2 ± 0.05cm thk HR Steel. Assembly should be mounted on sidepanel through Desklet arm connector made up of Glass filled nylon .Desklet Outer size should be 27±0.1cm. (W) X 1cm. (D) All steel part should be epoxy polyester powder coated (DFT 40-60 Microns). Approved Make Herman Miller/ BP Ergo/ Godrej/Rockworth/ Pen workers Mumbai/ space designs India/Govt Registered companies of equivalent make and quality | 100 | No | |
| 7 | 7 | Providing and placing Chair having seat made up of 1.2 +/- 0.1 cm thick hot pressed plywood & upholstered with leather and moulded polyurethane foam. The back shall be designed with contoured lumber support for extra comfort. Size of back shall be W-53cm, H-73cm & size of seat shall be W-54.6cm x D-49cm. High Resilience (HR) foam should be used in making seat & back which shall be moulded with density 45 +/- 2 kg/m ³ and hardness load 16+/- 2 kgf as per IS: 7888 for 25% compression. The seat and back should be arrested together with spine made of 0.8 +/- 0.05 cm thick HR steel and should be powder coated in black with 40-60 micron DFT (Dry film thickness). The armrest assembly should be made up of armrest tube, PU armrest and the armrest top. The armrest tube assy. shall be made of 2.54+/- 0.03cm x 0.16 +/- 0.0128 cm M.S E.R.W support tubes and chrome plated. The P.U armrest shall be made up of black integral skin polyurethane with 50-70 shore 'A' hardness reinforced with M.S insert. The armrest top shall be made up of ABS & upholstered with foam & leather. The mechanism of the chair shall have following features : 360° revolving type without back tilt. The chair shall be provided with pneumatic height adjustment which shall have stroke of 12.0 +/- 0.3 cm. The beloow should be made up of 3 piece telescopic type & injection moulded in black polypropylene. The pedestal shall be made of die-cast aluminium with buffing finish. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 67.0 +/- 0.5 cm pitch-centre-dia (77.0 +/- 1.0 cm with castors). The twin wheel castors shall be made of Nylon injection moulded in black color. Overall dimensions of Chair shall be, Width of Chair - 77cm, Depth of Chair - 77 cm as measured from pedestal below. Height of back from ground - min 99.4 to max 111.4 cms. Seat height - min 43.4cm to max 55.4 cm. Dimensions tolerance / variations shall be within +/- 1 cm. 'Approved Make Herman Miller/ BP Ergo/ Godrej/Rockworth/ Pen workers Mumbai/ space designs India/Govt Registered companies of equivalent make and quality | 5 | No | |
| 8 | 8 | E Podium:- SITC of Digital Podium which comes with an in-built 22” Interactive Panel with motorized tilting, 19” Sub Monitor which acts as an extended monitor for the presenter to view his notes, 7” Touch Controller to control all AV equipments like Projector, Motorized Screen, PC, Audio, DVD Player, etc, 19” Rack for installing AV equipment. Approved Makes: AHA or TechPodium or ILS./ Herman Miller/ BP Ergo/ Godrej/Rockworth/ Pen workers Mumbai/ space designs India/Govt Registered companies of equivalent make and qualityGovt Registered makes and of equivalent quality. | 1 | No | |
| 9 | 9 | low Back Ex. Chairs:- Providing and Placing a cchair having seat and back should be made from 1.2 ±0.1cm thk. hot pressed plywood and shall be upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam shall be designed with contoured lumbar support for extra comfort. The dimensions of seat shall be 45.0cm(W) x 42.0cm.(D) and of back shall be 40.0cm(W) x 47.0cm.(H). The seat and back covers shall be injection moulded in black Co-polymer Polypropylene. The HR polyurethane foam shall be moulded with density.=45±2.kg/m3 and hardness load 16±2 kgf as per IS:7888.for 25% compression. The one-piece armrests are injection moulded from black Nylon. The armrests are fitted to the seat with armrest connecting brackets made of 0.5 ± 0.05 em. thk. HR steel. The permanent contact mechanism shall be designed with 360° revolving type, 14±2°maximum back tilt only, Upright position locking, Tilt tension adjustment. The pneumatic height adjustment shall has an adjustment stroke of 11.0 ±0.3cm. The bellow shall be 3 piece telescopic type and injection moulded in black Polypropylene. The pedestal shall be injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal shall be 62.0 ±0.5cm. pitch-centre dia. (72.0 ±1.0cm with castors). The twin wheel castors shall be injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 43.0 to max 54.0cm, Height - min87.5 to max 98.5cm, Width & Depth of Chair as measured from pedestal - Width-71.0 cm and Depth-71.0 cm. Approved Make Herman Miller/ BP Ergo/ Godrej/Rockworth/ Pen workers Mumbai/ space designs India/Govt Registered companies of equivalent make and quality | 5 | No | |
| 10 | 10 | Waiting Sofa:- Providing and placing 3 seater Waiting chair having seat and back made of 0.12±0.013cm thick CR steel sheet with oblong perforations.They shall be welded to sideframe of size 3.2±0.05cm x 0.5 ± 0.05 cm thick HR steel. The welded assembly shall be powder coated ( DFT 40-60 microns). The seat shall has a front water fall edge to provide popliteal clearance for comfortable seating. It also shall has a buttock support curve that not only provides rear support but also prevents small children from falling through the gap between seat and back. Clean and flat surfaces of seat and back shall aids in easy maintenance. The dimensions of seat shall be 47.8 cm (W) x 44.6 cm (D) and of back shall be 41.6 cm (W) x 23. cm (H). Understructure assembly shall consist of connecting beam and leg assembly made of M.S.E.R.W. oblong tube of size 7.5±0.03cm x5.0±0.03cm x 0.02±0.016cm thick.The welded structure assembly shall be powder coated (DFT 40-60 microns ).The leg assembly shall be fitted with shoes and levellers in Nylon. The leg structure shall be designed with minimal area of contact close to ground providing easy access for cleaning purposes. The shoes fitted to leg assembly shall help in aligning the structure for back to back arrangements. Levelers should take care of uneven flooring.Connecting beam shall be fitted with snap locking endcap.It also aids in side-by-side understructure alignment. Armrest assembly shall consists of armrest frame and armrest pad. The armrest frame shall be made up of size 3.175±0.05cm x 0.47±0.027cm thickk HR steel and it shall be powder coated (DFT 40-60 microns). Armrest pad shall be injection molded in Nylon and shall be fitted onto the armrest frame. Overall Dimensions shall be Seat Height - 44.1 cm, Height - 78.5 cm, Width & Depth of Chair as measured from pedestal - Width-169.5cm and Depth-63.8 cm.The cushions for seat and back shall be made of 1.5 ±0.1cm thk foam on an 0.8±0.04cm flat MR grade ply and shall be upholstered with-leatherite. 'Approved Make Herman Miller/ BP Ergo/ Godrej/Rockworth/ Pen workers Mumbai/ space designs India/Govt Registered companies of equivalent make and quality | 3 | No | |
| 11 | 11 | Single Bed:- Providing and placing Single bed of Length should be 2060mm, Width 1131mm & Height - 930mm. The bed structure should consist of metal frames made of M.S. Channels in 1.0 mm Thickness. Horizontal plinths and bottom plinth should be made of 25 mm Thick Pre-laminated Particle Board. Head board should be made of 18 mm thick Pre-laminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. Tail board should be made of 18 mm thick Pre-laminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. Side rail should be made of 18 mm thick Pre-laminated Particle board with imported H.D.F. foil wrapped decorative trims fixed on to it. Mattress panels of Bed should be made of 18 mm thick Pre-laminated Particle Board with all the exposed edges are edge banded with 0.8 mm thick PVC edge banding. The overall construction of the bed should be Knock Down type. Finish of the bed should be 18 mm thick Pre-laminated Particle Board in Walnut shade. Metal frames should be powder coated in shade Mat Black to the thickness of 50 microns. Approved Make Herman Miller/ BP Ergo/ Godrej/Rockworth/ Pen workers Mumbai/ space designs India/Govt Registered companies of equivalent make and quality | 1 | No | |
| 12 | 12 | Qty can vary (+,-) 25% |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
