Rural Development Government Departments Closing in 0 days TDR #23593461

Tender For Civil Works - Roads:-Masauri Ekangarsaraiy Road To Chakkan Bigha Dalit Tola ( Dariyapur )

Issued by Government Departments · MASAURHI, Bihar
Tender Value
1.09 Crore
Estimated cost
Bid Submission
19 Feb 2020
0 days left
EMD
2.18 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
MASAURHI → Bihar
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Civil Works - Roads:-Masauri Ekangarsaraiy Road To Chakkan Bigha Dalit Tola ( Dariyapur )

BOQ

Name of Work: MASAURI EKANGARSARAIY ROAD TO CHAKKAN BIGHA DALIT TOLA (DARIYAPUR)
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11Setting Out\nConstruction of Reference & Working Benchmarks\nConstruction of Reference Pillars/Burjees1.472Km
22Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201.1.03Hect
33Construction of Embankment with Material Obtained from Borrow Pits\nConstruction of embankment with approved material obtained from borrow pits with a lift upto 1.5m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 100m as per Technical Specification Clause 301.5.1172.08Cum
44Construction of Embankment with Material Obtained from Borrow Pits\nConstruction of embankment with approved material obtained from borrow pits with a lift upto 1.5m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 100m as per Technical Specification Clause 301.5.2734.84Cum
55Construction of Subgrade\nConstruction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.4877.77Cum
66Granular Sub-base with Well Graded Material (Table 400.1)\nConstruction of granular sub-base by providing well graded material (Crushed Stone Aggregates and Local Sand), spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel 80-100 kN static roller capacity to achieve the desired density, complete as per Technical Specification Clause 4011332.57Cum
77WBM GrIII\nProviding, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.422.28Cum
88Prime Coat\nProviding and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0kg/sqm using mechanical means as per Technical Specification Clause 5025630.4Sqm
99Tack Coat\nProviding and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25-0.30kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.5630.4Sqm
1010Mix Seal Surfacing Bituminous With Waste Plastic\nProviding, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 13.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen (i.e. 92% of standard Bitumen and 8% waste processsed plastic by weight shall be used for coating aggregate after its heating) as per IRC:SP:98-2013, to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509.\nBy Mechanical Means5630.4Sqm
1111Ordinary Kilometer Stone (Precast)3Each
1212200 m stone (precast)6Each
1313Boundary Pillar\nReinforced cement concrete M15 grade boundary pillars/local stone of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting as per drawing and Technical Specification Clause 170429Nos
1414Painting two coats on new concrete surface\nPainting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and Technical Specification Clause 1701 (For culverts)111.6Sqm
1515Printing new letters & figures of any shade\nPrinting new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade as per drawings and Technical Specification \nClause 1701\n(ii) English & Roman1040Per cm ht. per letter
1616PMGSY Sign Board\nProviding and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.13Nos
1717Retro-reflectorised Traffic Signs\nProviding and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801
1818600 mm Circular6Nos
1919600 mm equilateral triangle12Nos
2020600 mm x 450 mm rectangular6Nos
2121900 mm side octagon2Nos
2222Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.294Sqm
2323Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.167.7Cum
2424Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203\nPCC M-1513.25Cum
2525Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203\nPCC M-2094.1Cum
2626Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204\n( PCC Grade M-20)65.2Cum
2727Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry
28281000MM Dia Pipe37.5RM
2929Laying Cement Concrete Pipe NP3(burried conduits) on first class bedding of granular material including fixing collar with cement sand mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonary work in head wall and parapets70RM
3030Add 1.0% Labour Cess1RUPEES
3131Add 12.0% GST1RUPEES
32321st Year Maintenance1Year
33332nd Year Maintenance1Year
34343rd Year Maintenance1Year
35354th Year Maintenance1Year
36365th Year Maintenance1Year
3737Add 1.0% Labour Cess1RUPEES
3838Add 12.0% GST1RUPEES

AI Tender Summary

OUR REF NO 23593461
AUTHORITY Government Departments
TENDER VALUE 1.09 Crore
LAST DATE 19-02-2020
Authority
Authority Name Rural Works Department
Work Description Tender For Civil Works - Roads:-Masauri Ekangarsaraiy Road To Chakkan Bigha Dalit Tola ( Dariyapur )
Basic Detail
Tender No MMGSY-20-MASAURHI-01
Bidding Type Tender
Location
City MASAURHI
State Bihar
Key Dates
Publish Date 12 Feb 2020
Submission Date 19 Feb 2020
Open Date 19 Feb 2020
Finance
Tender Value 1.09 Crore
Tender Fee 10000
EMD 2.18 Lakhs
Exemption Not Available
Document List
BOQ_155212.xls
Tendernotice_1.pdf
SBDD.pdf
EDB14D23-D628-4C87-9C4B-8D6AE345A836.html

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Feb 12, 2020
11:30 IST

Tender Published

Tender notice published.

Completed
Feb 19, 2020
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Feb 19, 2020

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
xls

BOQ_155212.xls

pdf

Tendernotice_1.pdf

pdf

SBDD.pdf

html

EDB14D23-D628-4C87-9C4B-8D6AE345A836.html

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender