| 1 | 1 | Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-Charge. | | 55 | Cum |
|---|
| 2 | 2 | Returning, filling in, with excavated soil including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and as directed by Engineer-in-Charge. | | 40 | Cum |
|---|
| 3 | 3 | Removing excavated material, exc 250m but n.exc 500m and depositing where directed complete all as specified and as directed by Engineer-in-Charge. | | 15 | Cum |
|---|
| 4 | 4 | Supplying and laying of CPVC pipes of size 40mm outer dia SDR 11 and plain CPVC SDR 11 fittings such as bends, elbows, tee, sockets, reducers etc in trenches complete all as specified and as directed by Engineer-in-Charge. Note:- Rate quoted by the bidder shall be inclusive of PVC fittings as required at site. | | 430 | RM |
|---|
| 5 | 5 | Supplying and laying of CPVC pipes of size 25mm outer dia SDR 11 and plain CPVC SDR 11 fittings such as bends, elbows, tee, sockets, reducers etc in trenches complete all as specified and as directed by Engineer-in-Charge. Note:- Rate quoted by the contractor shall be inclusive of PVC fittings as required at site. | | 120 | RM |
|---|
| 6 | 6 | Supply and fixing CPVC ball valve, suitable for CPVC pipe of size 40mm outer dia complete all as specified and as directed by Engineer-in-Charge. | | 8 | Each |
|---|
| 7 | 7 | Supply and fixing CPVC ball valve, suitable for CPVC pipe of size 25mm outer dia complete all as specified and as directed by Engineer-in-Charge. | | 20 | Each |
|---|
| 8 | 8 | Supply and fixing flexible heavy duty, 3 layered PVC braided hose pipe of size 3/4\"dia, with and including pipe connector and necessary clamps for connecting to CPVC pipe of dia 25mm complete all as specified and as directed by Engineer-in-Charge. | | 200 | RM |
|---|
| 9 | 9 | Supplying and Fixing of submersible pump set of capacity 5HP 3 phase 4\" including necessary fixing arrangements and testing complete all as specified and as directed by Engineer in charge. Make of pump:- CRI, Model No:- SC01ALHITI372901G2 or its equivalent make of zonal sepcifications as approved by engineer in charge. Note:- Rate quoted by bidder shall be inclusive of M&L required for lowering of pumpset, discharge pipe connection, electrical cable connections etc required for completing the job. | | 4 | Each Job |
|---|
| 10 | 10 | Supplying and fixing DOL starter 3 phase 440 V 50 Hz suitable for motor capacity of 5 HP including testing complete all as specified and as directed by Engineer in charge. | | 4 | Each |
|---|
| 11 | 11 | Supplying and laying power/Control copper cable, solid/stranded copper conductor, XLPE insulated, cores laid up, PVC tape/PVC extruded, inner sheathed for 3 core 6 Sqmm cable, unarmoured, extruded PVC Type ST2 sheathed, 1100 V grade as per IS 7098 submersible cable for connection between submersible pump set and DOL starter complete all as specified and as directed by Engineer in charge. | | 45 | RM |
|---|
| 12 | 12 | Material and labour for concrete cutting in ground floors and pavings n.exc 15cm depth (below Ground level) for road cutting channel to lay pipes complete all as specified and as directed by Engineer-in-Charge. | | 12 | Cum |
|---|
| 13 | 13 | Material and labour for PCC 1:2:4,Type B2 (40 mm graded aggregates) upto 100mm thick for making good to area of concrete road cutting complete all as specified and as directed by Engineer-in-Charge. | | 12 | SQM |
|---|
