Tender For Outside Entrance Gate Of Park Around Water Body
Tender Value
10.48 Lakhs
Estimated cost
Bid Submission
25 Feb 2020
0 days left
EMD
20965
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhuliyan → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Outside Entrance Gate Of Park Around Water Body
BOQ
| Name of Work : Outside Entrance Gate of park around water body | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation of foundation trenches ordrains, in all sorts of soil (including mixed soil butexcluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75m. as directed. Theitemincludesnecessary trimmingthe sides of trenches,levelling, dressing andramming the bottom, bailing out water as requiredcomplete.\n(a) Depth of excavation not exceeding 1,500 mm.Page no 1 Item no 2 (a) | 39 | %Cum | |
| 2 | 2 | Earth work in filling in foundation trenches or plinthwith good earth, in layers not exceeding 150 mm.including watering and ramming etc. layer by layercomplete. (Payment to be made on the basis ofmeasurement of finished quantity of work)\n(a) With earth obtained from excavation of\nfoundation.. | 13 | %Cum | |
| 3 | 3 | Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand. | 27 | Sqm | |
| 4 | 4 | Cement concrete with graded jhama khoa (30 mm size)excluding shutteringIn ground floor and foundation. | 2 | Cum | |
| 5 | 5 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs,beams, columns lintels curved or straight including fitting fixing and striking out after completion of works ( upto roof of ground floor). (c) Steel shuttering or 9 to12 mm thick approved quality ply board shuttering in any concrete work. | 200 | Sqm | |
| 6 | 5.01 | (f) 25 mm to 30 mm shuttering without staging in foundation | 100 | Sqm | |
| 7 | 6 | Ordinary Cement Concrete (Mix - 3:1.5:1) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any in ground floor | 30 | Cum | |
| 8 | 7 | Reinforcement for reinforced concrete work in all sorts of structuresincluding distribution bars, stirrups, binders etc initial straightening and\nremoval of loose rust (if necessary), cutting to requisite length, hooking andbending to correct shape, placing in proper position and binding with 16gauge black annealed wire at every intersection, complete as per drawing\nand direction.(a) For works in foundation and upto roof of ground floor/upto 4 mII.\nSALL /TATA/RINL (i) Tor steel/Mild steel\n page no 43 item no 40 | 4 | Mt | |
| 9 | 8 | Brick work with 1st class bricks in cement mortar (4:1)b)in foundation | 13 | Cum | |
| 10 | 9 | Plaster (to wall, floor, ceiling etc) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface including throating nosing and drip course where necessaryWith 4: 1 cement mortar.20 mm thick plaster. | 200 | Sqm | |
| 11 | 10 | Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) | 200 | Sqm | |
| 12 | 11 | (a) M.S.or W.I. Ornamental grill of approved design jointscontinuously welded with M.S, W.I. Flats and bars of windows,\nrailing etc. fitted and fixed with necessary screws and lugs inground floor. The weight of grill per Sq.M wiil be detemined by taking the physical weight of fabricated grill and dividing the same by convered area of the same .N.B shop priming will be allowed to facilitate inspection of workmanship Weight of grill is t be taken after final grinding and finishing the weld .\n(ii) Grill weighing above 16 kg /Sqm mtr and above | 5 | Qntl | |
| 13 | 12 | Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottomguide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in\nfully stretched position 20mm x 5mm M.S. flats as collapsiblebracings properly rivetted and washered including 38mm steel\nrollers including locking arrangements, fitted and fixed in positionwith lugs set in cement concrete and including cutting necessary\nholes, chasing etc. in walls, floors etc. and making good damages\ncomplete.(Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25%\nfor each addl. floor above 4th floor)In ground floor | 11 | Sqm | |
| 14 | 13 | Applying Exterior grade Acrylic primer of approved quality andbrand on plastered or cencrete surface old or new surface t receivedecorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.In Ground Floor:(b) Two coats | 220 | % Sqm | |
| 15 | 14 | Protective and Decorative Acrylic exterior emulsion paint of approvedquality, as per manufacturer's specification and as per direction ofEngineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidentalcharges but excluding the cost of primer.b) Premium 100% Acrylic Emulsion Page no 197 Item no 17 (b) | 220 | Sqm | |
| 16 | 15 | (a) Priming one coat on steel or other metal surface with synthetic oilbound primer of approved quality including smoothening surfaces by sand\npapering etc | 44 | Sqm | |
| 17 | 16 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. includingusing of approved putty etc. on the surface, if necessary :(b) On steel or other metal surface :(ii) Two coats (white in shade) | 44 | Sqm | |
| 18 | 17 | Supplying,fitting & fixing in position suspended false ceiling with frame work of\naluminium hollow section of size 50mm X 25mm (2.0mm thickness) combined with\naluminium corners of size 38mm X 25mm, suspended by aluminium hollow tube\nsection of size 38mm X 25mm having size of 600mm X 600mm ceiling with\naluminium composit panels (ACP) - Interior grade of thickness 3.0mm comprising\nof proctective film, polyester coating, primer, aluminium coil, adhesive film,\npolyethylene core again with one layer adhesive film, aluminium bottom coating\nand finally service coating as per manufacturer's specification finished with\naluminium screw and silicon sealent complete in all respect including all\nincidental charges etc. as per direction of Engineer-in-charge.) | 80 | Sqm | |
| 19 | 18 | GST 12% | 1 | Nos | |
| 20 | 19 | Cess 1% | 1 | Nos |
AI Tender Summary
Tender Timeline
Feb 10, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 25, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 28, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender