Tender For Civil Works - Roads Work -Thadi To Dhanjaiya Dakshinwesh ( Dakshin Tol )
Tender Value
48.92 Lakhs
Estimated cost
Bid Submission
17 Feb 2020
0 days left
EMD
48920
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
JAYNAGAR → Bihar
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
tender for Civil Works - Roads work -Thadi To Dhanjaiya Dakshinwesh ( Dakshin Tol )
BOQ
| Name of Work: ROAD NAME- THADI TO DHANJAIYA DAKSHINWESH(DAKSHIN TOL) , DIVISION-JAYNAGAR,BLOCK-LADANIYA | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Setting Out Pillars \nProviding & Fixing of Working benchmark Pillars 2 nos. per km & 6 Nos. of reference pillars required for 1 Km. as per drawings given and direction of E/I | 5 | No. | |
| 2 | 2 | Clearing and Grubbing Road Land (By manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of E/I | 0.201 | Hec | |
| 3 | 3 | Construction of Embankment with material obtained from borrow pits with a lift upto 1.5 m , transporting to the site spreading , grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m & 100 m as per Technical Specification Clause 301.5 . (Including Royality & Labour Cess).\nFor 1000 m lead @ 20 % | 171.844 | Cum | |
| 4 | 4 | For 100 m lead @ 80% | 687.376 | Cum | |
| 5 | 5 | Construction of Subgrade and Earthen Shoulders\nConstruction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m & 100 m as per Technical Specification Clause 303.1. (Including Royality & Labour Cess). | 527.88 | Cum | |
| 6 | 6 | Granular Sub-base with Well Graded Material (Table 400.1)\n( By mix in place method ) For Grading I MaterialConstruction of granular sub-base by providing well graded material, spreading in uniform layers with tractor mounted grader arrangement on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. | 468.77 | Cum | |
| 7 | 7 | WBM Grading 3 (By Mechanical Means) \nProviding, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. | 162.77 | Cum | |
| 8 | 8 | Prime Coat (Low porosity)\nProviding and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.7- 1.0 kg/sqm using mechanical means as per Technical Specification Clause 502. | 2170.24 | Sqm | |
| 9 | 9 | Tack Coat\n Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with Primer and clened with hydriloc broom as per technical specification aclouse 503. | 2170.24 | Sqm | |
| 10 | 10 | Mix Seal Surfacing\nProviding, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509. | 2170.24 | Sqm | |
| 11 | 11 | Supply and poviding NP2 300 mm dia hume pipe across carriageway in open areas | 15 | M | |
| 12 | 12 | Kilometre stone \nReinforced cement concrete M15 grade kilometre local stone of standard design asper IRC:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703.\nii) Km stone | 2 | No. | |
| 13 | 13 | iii) 200 m stone | 2 | No. | |
| 14 | 14 | Retro-reflectorised Traffic Signs\nProviding and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801\n600 mm equilateral & triangle, (Left Hand & Right Hand Curve & Narrow BrIdge) | 6 | No. | |
| 15 | 15 | Stop Board At Start & End | 2 | No. | |
| 16 | 16 | 600 mm x 450 mm rectangular, (School & Place board) | 4 | No. | |
| 17 | 17 | Planting of Trees and their Maintenance for one Year\nPlanting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, planting the saplings, backfilling the trench, watering, fixing the tree guard and maintaining the plants for one year | 57 | Each | |
| 18 | 18 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface\nProviding and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. | 114.6 | Sqm | |
| 19 | 19 | (I)Providing and Fixing 'Logo' of MMGSY Project \nProviding and fixing of typical MMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 | 5 | No. | |
| 20 | 20 | HPC 1X1000 MM\nEarth work in excavation for foundation of structures upto 3.0 m depth as per drawing and technical specification clause 1104 | 59.6 | Cum | |
| 21 | 21 | Providing M15 (PCC 1:2.5:5) as levelling course in foundation :-- Providing PCC M 15 (1:2.5:5) concrete for plain concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 | 9.2 | Cum | |
| 22 | 22 | Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 ( M20 ) | 67.48 | Cum | |
| 23 | 23 | Providing and laying RCC pipe NP-3 for culverts on first class bedding of PCC M10 material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works,backfilling concrete and masonary works in head walls and parapets as per clause 1106 | 15 | M | |
| 24 | 24 | Painting on Parapet Wall (Black & White Strips) Painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and Technical Specification Clause 1701 | 41.28 | Sqm | |
| 25 | 25 | Add GST @ 12% | 1 | Rs | |
| 26 | 26 | Add L.C. @ 1% | 1 | Rs | |
| 27 | 27 | Add Seigniorage Fee @ 10 % | 1 | Rs | |
| 28 | 28 | 1st Year Maintenance | 0.573 | Km | |
| 29 | 29 | 2nd Year Maintenance | 0.573 | Km | |
| 30 | 30 | 3rd Year Maintenance | 0.573 | Km | |
| 31 | 31 | 4th Year Maintenance | 0.573 | Km | |
| 32 | 32 | 5th Year Maintenance | 0.573 | Km | |
| 33 | 33 | Add GST @ 12% | 1 | Rs. | |
| 34 | 34 | Add L.C. @ 1% | 1 | Rs. | |
| 35 | 35 | Add Seigniorage Fee @ 10 % | 1 | Rs. |
AI Tender Summary
Tender Timeline
Feb 10, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 17, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 17, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender