Public Administrative Department Government Departments Closing in 0 days TDR #23553827

Mukhathala Bp 2019-20 -Providing Ac Unit , Pa Systemand Electrification Of Newly Renovated Concil Hall Attache To Mukhathala Block Office

Issued by Government Departments · Mukhathala, Kerala
Tender Value
9.60 Lakhs
Estimated cost
Bid Submission
17 Feb 2020
0 days left
EMD
24000
Bank guarantee accepted
Document Fee
2150
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Mukhathala → Kerala
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Mukhathala Bp 2019-20 -Providing Ac Unit , Pa Systemand Electrification Of Newly Renovated Concil Hall Attache To Mukhathala Block Office

BOQ

Work Name:Providing AC Unit PA System and Electrification of Newly renovated Council Hall attached to Mukhathala Block Office
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11Supply and wiring points according to IS 732-1989 using rigid PVC ivory conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm PVC insulated stranded single core FR copper conductor cable 650V grade,including providing switch board main ,and continuous earthing with 1.5sqmm green coloured FR wire , required qty of copper earth socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular typeROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required.BI01010001010000000000000515BI0100001113
21.1Single control light point with 6A, 3 plate ceiling roseBI01010001010000000000000515BI01000011143Nos
31.2Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator.BI01010001010000000000000515BI01000011153Nos
41.35 Light point controlled by one switch with out ceiling roseBI01010001010000000000000515BI01000011162Nos
51.4Combined plug point with 6 A, 5 pin plug socket controlled by 6 A switch in the same switch board as that of light points.BI01010001010000000000000515BI01000011172Nos
61.5Independent plug point with 6 A, 5 pin plug socket controlled by 6 A switch in seperate switch board as that of light points.BI01010001010000000000000515BI01000011184Nos
72Supply, conveyance installation testing and commissioning of 230 V, 50 hz, 1800 Lumen, 0.8 pf, 15% THD, 2.5 KV Lighting surge protection type 18 w 1200 mm LED pre-wired light fittings complete with all accessories . directly on wall or ceiling and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire etc as required.BI01010001010000000000000515BI01000011193Nos
83Supply and installation of suitable size MS rod type fan clamp as per IS 732 as required.BI01010001010000000000000515BI01000011203Nos
94Supply and providing every additional length of down rod of suitable size heavy gauge GI / WI pipe with 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming in relevant ISS or with original wiring extended including painting as required.3mts
105Supply, Conveyance, installation, testing and commissioning of recess mounting 24 W LED down light fittings of all types directly in the existing opening on the false - ceiling including giving connections with required length of 16/0.20 mm 3 core round copper conductor flex wire conforming to relevant ISS or with the extended original wiring etc as required10Nos
116Supply and fixing the following sizes of PVC conduit conforming to IS 9537/1983 Part 3 along with all required accessoriesBI01010001010000000000000515BI0100001121
126.120mm Dia medium gauge160Mts
136.225mm dia medium gauge48Mts
146.332 mm dia medium gauge(projector)12Mts
157Supply and drawing 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.
167.11.00 sq mm 2 run (speeker)56Mts
177.22.50 sq mm 3 run68Mts
187.31.50 sq mm 3 run44Mts
197.44.00 sq mm 4 run + 2.5 sq.mm 1 run52Mts
207.56.00 sqmm 4run16Mts
218Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required
228.13 module metal box in recess4Nos
238.29 module metal box in recess2Nos
248.33 module white/ off-white4Nos
258.49 module white/ off-white2Nos
268.56 A SP 1 way switch6Nos
278.616 A SP 1 way switch4Nos
288.76 A Universal socket6Nos
298.86/16 A socket4Nos
309Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required
319.16 way (8+18) - three phase double cover (IP 42/43)1Nos
329.26 way (8+18) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43) ( Main DB)1Nos
3310Supply and installation of the following accessories suitable for 50 Hz , AC supply conforming to IS 8828-1995/ IEC 60898 of the following current ratings in the existing enclosure and giving connections as required
3410.140 A four pole mini break isolator1Nos
3510.2100 A, 25/35 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL1Nos
3610.340 A, 4 pole, 30 mA RCCB1Nos
3710.46 A to 32 A, 10 kA, SP MCB (ccurve)18Nos
3810.540 A, 10 kA, TP MCB (C curve)6Nos
3911Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required.
4011.12.00 mm copper conductor (14 SWG)78Mts
4111.23.15 mm copper conductor (10 SWG)8Mts
4212supply of superior quality copper earth socket for the following sizes of earth conductor including crimping etc. as required.
4312.12.00 mm (14 SWG)4nos
4412.23.15 mm (10 SWG)24nos
4513Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required
4613.125 x 3 mm brass bolt & nut4Nos
4713.225 x 6 mm brass bolt & nut16Nos
4814Fabrication, supply & installation of dust and vermin proof, wall mounting, Sintex make meter box of 600x600x 214 mm size suitable for fixing KSEB meter,fuse units, CT etc, hinged door construction for the front side with compartments if necessary, providing vision panel for the meter compartment, knock out for cable entry and exit.1No
4914.132 A, 415 V, DIN type fuse base.3Nos
5014.263 A, 415 V, 2 way neutral link mounted on DMC/ SMC base.1No
5114.320A, 230 V, DIN type fuse6Nos
5215Supply and installation of switch gear units in sheet steel enclosure complete with handle assembly, door interlock and pad locking arrangement of 32A, 4 pole ratings on existing angle iron frame work or directly to wall using necessary bolts & nuts, fixing the unit to wall, making good the damages, colour washing etc. including giving necessary connections as required. (excluding cost of HRC fuse links in case of SDF/ SDFCO) (AC)1No
5316Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of 3.5 core 25 sq mm sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.8Mts
54174 core 10 sq mm with factory made clamp42Mts
551810sq mm2nos
561925 sq mm comprasion Gland2Nos
572035 sq mm with 12 mm wide x 1 mm thick clip4Nos
582116 sq mm2Nos
592210 sq mm4Nos
6023Preparation of all drawing submitting and approvel from KSEB, obtaining power allocation, submitting of completion certificates and arranging inspection, getting sanction and energisation certificates from KSEB and obtaining power connection etc: for commissioning of the whole installation in the permises.1No
6124Supplying and installation including all manner of supports/ suspenders, anchor bolts etc f made out of suitable size channel sections, slotted angles, flats, MS plates etc as required including painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.68Kg
6225Supplu, Conveyance, testing and commissioning of 5.5 TR capacity ceiling suspended ductable type airconditioner with DX coil copper condenser complete with suitable capacity driven motor, air cooled condenser with all accessories, hermetically sealed scroll compressor electronic microprocessor pendant controller with digital display, first charge R 22 refrigerant gas, vibration isolator pads, ODU MS stand and saftey devices like thermal protector, pressure relief valve, over load relays single phase preventer, high-low pressure cut out, suitable for three phase 440 V supply..1No
6326Supply and installation of hard drawn 19 G copper piping including 9 mm thick nitrile rubber insulation
6426.1Suction Line 1/3/814Mts
6526.2Liquid Line 7/814Mts
6627Supply, installation, testing and commissioning of GSS ducting with angle , flanges and supports
6727.124 G ducts68m2
6827.222 G ducts12m2
6928Supply and installation of 9 mm thick Nitrile rebber insulation on ducts60m2
7029supply and insallation of 24 G density 12 mm thic glass wool rigid covered with 26 G aliminium perforated sheet along with Rp tissue11m2
7130Supply and providing aluminium returen air grill with adequate deflection.2.2m2
7231Supply and providing outdoor condensing unit frame made out of angle frame without catwalk.1No
7332Supply and providing fresh air cowl1No
7433Supply and providing Canvas connection in between indoor and duct1No
7534Supply, installation, testing of leak with Dry N2, Vacumissing, gas charging with R22 gas and commissiong1No
7635Central Distribution amplifier.1No
7735.1Supply of central distribution amplifier of the following size
7835.2a) Digital recorder
7935.3b) Play bak prerecorder massages
8035.4c) 3 mic. Input and one aux input
8135.5d) Send/ return facility
8235.6e) Head phone out put provided
8335.7f) Automatic mic. Off switch provided
8436Chairman Control Unit1No
8536.1a) Highly sensitive condenser microphone
8636.2b) 47 cm. goosneck + expansition
8736.3c) Ring led
8836.4d) Built - in speaker and volume control
8936.5e) Head phone out put provided
9036.6f) Priority mute delegate
9136.7g) Chime tone attention
9236.8h) Priority and talk switch
9337Delegate Unit25Nos
9437.1a) Highly sensitive condenser microphone
9537.2b) 47 cm. goosneck + expansition
9637.3c) Ring led
9737.4d) Built - in speaker and volume control
9837.5e) Head phone out put provided
9937.6f) Indicate the out put signal level
10037.7g) Talk switch
10138Power boosting unit1No
10239Confrence cable through conduit104Mts
10340Extra speaker system for sound boosting
10440.1a) Amplifier 160 w1No
10540.2b) 2way 30W Speaker3Nos
10640.3c) Wireless microphone duit UHF1No
10741Speaker Cabling through conduit65Mts
10842Chagres for Conveyance, installation, testing and commissioning of whole unit1Job

AI Tender Summary

OUR REF NO 23553827
AUTHORITY Government Departments
TENDER VALUE 9.60 Lakhs
LAST DATE 17-02-2020
Authority
Authority Name Local Self Government Department
Work Description Mukhathala Bp 2019-20 -Providing Ac Unit , Pa Systemand Electrification Of Newly Renovated Concil Hall Attache To Mukhathala Block Office
Basic Detail
Tender No 01/tender/2019-20
Bidding Type Tender
Location
City Mukhathala
State Kerala
Key Dates
Publish Date 10 Feb 2020
Submission Date 17 Feb 2020
Open Date 20 Feb 2020
Finance
Tender Value 9.60 Lakhs
Tender Fee 2150
EMD 24000
Exemption Not Available
Document List
BOQ_478529.xls
Tendernotice_1.pdf
993AF4E7-047C-48AA-8CF3-BB0E4C8C911A.html
prilielectrical.pdf
nitele.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Feb 10, 2020
11:30 IST

Tender Published

Tender notice published.

Completed
Feb 17, 2020
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Feb 20, 2020

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
xls

BOQ_478529.xls

pdf

Tendernotice_1.pdf

html

993AF4E7-047C-48AA-8CF3-BB0E4C8C911A.html

pdf

prilielectrical.pdf

pdf

nitele.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders