Annual Plan 2019-20 Renovation To Panchayath Office Information Facilitation Center Project No . 135 Annual Plan 2019-20 Renovation To Panchayath Office Information Facilitation Center Project No . 135
Tender Value
12.49 Lakhs
Estimated cost
Bid Submission
18 Feb 2020
0 days left
EMD
35000
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
MURIYAD → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Annual Plan 2019-20 Renovation To Panchayath Office Information Facilitation Center Project No . 135 Annual Plan 2019-20 Renovation To Panchayath Office Information Facilitation Center Project No . 135
BOQ
| Work Name:ANNUAL PLAN 2019-20 RENOVATION TO PANCHAYATH OFFICE INFORMATION FACILITATION CENTER PROJECT NO.135 | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | OFFICE RENOVATION | BI01010001010000000000000515BI0100001113 | ||
| 2 | 1.001 | 15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar | BI01010001010000000000000515BI0100001114 | 0.96 | cum |
| 3 | 1.002 | 50.6.1.5 : Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete | BI01010001010000000000000515BI0100001115 | 0.96 | cum |
| 4 | 1.003 | 13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | BI01010001010000000000000515BI0100001116 | 10.24 | sqm |
| 5 | 1.004 | 13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | BI01010001010000000000000515BI0100001117 | 10.24 | sqm |
| 6 | 1.005 | 13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work | BI01010001010000000000000515BI0100001118 | 10.24 | sqm |
| 7 | 1.006 | 15.23.1 : Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm | BI01010001010000000000000515BI0100001119 | 216.3 | sqm |
| 8 | 1.007 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | BI01010001010000000000000515BI0100001120 | 16.225 | cum |
| 9 | 1.008 | 11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | BI01010001010000000000000515BI0100001121 | 231.6 | sqm |
| 10 | 1.009 | od352376/2019_2020 : Providing and fixing good quality marine plywood 18mm thick board to frame, backing or studding with screws etc. complete) as per the direction of site Engineer-in-charge. | BI01010001010000000000000515BI0100001122 | 155.958 | sqm |
| 11 | 1.01 | od356090/2019_2020 : Providing and fixing good quality 1.0 mm thick decorative laminated sheet on both sides of marine plywood board including cutting, finishing labour , conveyance etc with bonding agent as per the direction of site Engineer-in-charge. | BI01010001010000000000000515BI0100001123 | 311.911 | sqm |
| 12 | 1.011 | od354040/2019_2020 : Providing and fixing hylam board-2mm thick- in panelling fixed in aluminum doors,<br>windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per<br>architectural drawings and directions of engineer-in-charge | BI01010001010000000000000515BI0100001124 | 25.34 | sqm |
| 13 | 1.012 | od356263/2019_2020 : Providing and fixing pvc edge bandingtape 2mm thick of approved brand | BI01010001010000000000000515BI0100001125 | 437.75 | metre |
| 14 | 1.013 | od354456/2019_2020 : Providing and fixing glazing in Paneled or paneled & glazed shutters for doors and partition (area for opening for panel inserts excluding portion inside grooves or rebates to be measured) plain glass pane<br> 5.5mm thick glass pane | BI01010001010000000000000515BI0100001126 | 6.63 | sqm |
| 15 | 1.014 | od354563/2019_2020 : Providing and fixing glazing in Paneled or paneled & glazed shutters for doors and partition (area for opening for panel inserts excluding portion inside grooves or rebates to be measured) plain glass pane<br> 8mm thick glass pane | BI01010001010000000000000515BI0100001127 | 10.66 | sqm |
| 16 | 1.015 | 9.90.1 : Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete.Size 40 mm | BI01010001010000000000000515BI0100001128 | 72 | no |
| 17 | 1.016 | 9.92.1 : Providing and fixing chromium plated brass handles with necessary screws etc.\ncomplete:125 mm | BI01010001010000000000000515BI0100001129 | 74 | no |
| 18 | 1.017 | 9.115 : providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer -in-charge. | BI01010001010000000000000515BI0100001130 | 60 | set |
| 19 | 1.018 | 21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | BI01010001010000000000000515BI0100001131 | 38.44 | kg |
| 20 | 1.019 | 21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) | BI01010001010000000000000515BI0100001132 | 7.587 | kg |
| 21 | 1.02 | od357162/2019_2020 : Supplying and fixing Granite Name board as per the direction of the Engineer-in-charge. | BI01010001010000000000000515BI0100001133 | 1 | each |
AI Tender Summary
Tender Timeline
Feb 10, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 18, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 24, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender