Comprehensive Maintenance Works At Ctw Ins Vishwakarma Pallava Park And Cqae Under Age Br Ii Of Ge Nd Visakhapatnam
Tender Value
40 Lakhs
Estimated cost
Bid Submission
28 Feb 2020
0 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatnam → Andhra Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Comprehensive Maintenance Works At Ctw Ins Vishwakarma Pallava Park And Cqae Under Age Br Ii Of Ge Nd Visakhapatnam
BOQ
| Name of Work: COMPREHENSIVE MAINTENANCE WORKS AT CTW, INS VISHWAKARMA, PALLAVA PARK AND CQAE UNDER AGE B/R - II OF GE [ND] VISAKHAPATNAM | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | The rates quoted by the tenderer shall deemed to be inclusive for the following provisions in addition to the other conditions specified in the tender documents. No claim whatsoever shall be entertained at a later date on this account:-\n[i] The repairs shall be done by skilled workmen in the relevant field to the entire satisfaction of Engineer-in-Charge. The contractor shall engage sufficient manpower for the entire period so that progress of work shall not be hampered due to non availability of labour at any time.\n[ii] The contractor on getting information through Site order / Works diary regarding the nature of repair to be carried out, he shall immediately respond to the same and make all out efforts to carry out the same on priority within 48 hours. In case of any delay in responding / attending the repairs within 48 hours, the GE may at his absolute discretion impose penalty on the contractor at Rs. 100/- per day per each work ordered upto 05(Five) days and Rs. 200/- per day thereafter till completion of the work in case of delay without valid reasons as decided by GE.\n[iii] Further, the above penalty is applicable even for the multiple locations of work at the same period. It is the responsibility of contractor to make suitable arrangements for attending the repairs simultaneously at all the places.\n[iv] The decision of the GE as to whether a particular repair has been attended or not on a particular day will be final and binding. The above penalty shall be in addition to the provisions made in clause 50 of IAFW-2249 i.e (Compensation for delay in completion of work). | |||
| 2 | 2 | S & F Machine cut kota stone slab flooring 20 to 25mm thick laid in floors and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 20mm thick screed bed in CM 1:6 including dismantling existing stone slabs / tiles of any description complete all as specified and directed. | 600 | SqM | |
| 3 | 3 | S & F Machine cut kota stone slab 20 to 25mm thick as in vertical surfaces such as skirting laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over and including 10mm thick backing coat in CM 1:4 including dismantling existing stone slabs / tiles of any description complete all as specified and directed. | 150 | SqM | |
| 4 | 4 | Demolition of unreinforced cement concrete of any description and in position complete all as directed. | 35 | CuM | |
| 5 | 5 | M & L for Machine pressed precast cement conctete coloured interlocking paver block with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade over and including 50mm thick sand complete all as specified and directed. | 400 | SqM | |
| 6 | 6 | M & L for PCC 1:32:4, type B-1, using 20mm graded stone aggregate as in cast in lintels upto 1.5m span, copings, bed blocks for hold fasts, bed plates, roof kerbs and similar work including weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified and directed. | 1 | CuM | |
| 7 | 7 | M & L for coloured chequered cement concrete tiles of size 30cm x 30cm x 22 to 25mm thick set jointed and pointed with grey cement and no pigments in neat cement slurry as in floors and pointed with white cement laid over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed. [The design, colour and pattern shall be as approved by the GE] | 300 | SqM | |
| 8 | 8 | M & L for 100mm thick, PCC 1:2:4, type B-2, using 40mm graded stone aggregate as in sub base, hard standing complete all as specified and directed. | 300 | SqM | |
| 9 | 9 | M & L for 75mm thick, PCC 1:3:6, type C-2, using 40mm graded stone aggregate as in plinth protection laid to slope in panels including joints filled with mastic filling and finishing the surfaces even and smooth without using extra cement including demolition of existing concrete complete all as specified and directed. | 300 | SqM | |
| 10 | 10 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed. | 30 | EACH | |
| 11 | 11 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4.0 Sqm each complete all as specified and directed. | 30 | EACH | |
| 12 | 12 | Taking down shutters not exc 1.0 Sqm each complete all as specified and directed. | 20 | LEAF | |
| 13 | 13 | Taking down shutters area exc 1.0 Sqm but not exc 2.0 Sqm each complete all as specified and directed. | 10 | LEAF | |
| 14 | 14 | Refixing of shutters area exc 1.0 Sqm but not exc 2.0 Sqm each complete all as specified and directed. | 5 | LEAF | |
| 15 | 15 | M & L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. | 1 | CuM | |
| 16 | 16 | M & L for 2nd class hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared\nto receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc. complete all as specified and directed. | 18 | SqM | |
| 17 | 17 | M & L for 2nd class hardwood 35mm thick, plain, framed, panelled shutters (two panels), with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically presure treated fitted to chowkats complete all as directed. | 18 | SqM | |
| 18 | 18 | S & F solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as specified complete all as directed. | 46 | RM | |
| 19 | 19 | S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as specified and as directed. | 12 | SqM | |
| 20 | 20 | S & F factory made UPVC white coloured sliding window three track made of extruded profiles with wall thickness of 2.3mm (+ 0.2mm). Window profile with hallow section with multi chamber, frame 88mmx52mm, Sliding sash 42mmx67mm sliding mesh sash 42mmx57mm sliding interlock (one vertical length in each shutter) 45.5mmx28mm glazing bend (24.5mmx16mm) will be mitred cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water, etc, making arrangement for fixing of hardware, EPDM gasket 1.2mm+0.2mm thick galvanised steel frame (30mmx18mm) 2 Nos sliding sash (30mmx18mm) sliding mesh sash 26mmx10mm. Profile to be inserted in required profile, frame will be fixed to the wall with 8mmx100mm long fasteners. \nNotes: (i) Quoted rate is inclusive for touch lock of zinc alloyed white powder coated, steel roller system, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete excluding cost of glazing. (ii) The size of sections shall be as per site requirement and available with manufacturers irrespective of size specified above suitable for the opening. (iii) Net opening will be measured for payment purpose | 10 | SqM | |
| 21 | 21 | S & F PVC Ventilators frame work with multiple chamber hollow PVC section comprising of DWUF 405 sections with wall thickness of 5mm made out of extruded 5mm PVC sheet, mitre cut at two comers and jointed with 2 Nos of 150mm long brackets of 15 x 15mm MS square tube, the two vatted profiles are to be reinforced with 19 x 19mm MS square tube, 50% of bottom portion is fixed with3mm thick pin headed glass and balance 50% of top portion is fixed with 4mm thick pin headed glass louvers and covered with 0.36mm dia stainless steel wire mesh at top portion including necessary PVC beading with screws and 3 Nos 12mm dia MS guard bars fixed in ventilator frame including two coats of synthetic enamel paint over a coat of red oxide primer to MS guard bars complete all as specified and directed by the Engineer-in-Charge | 5.5 | SqM | |
| 22 | 22 | M & L for Aluminium powder coated (Thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing complete all as directed. | 82 | KG | |
| 23 | 23 | M & L for Anodised aluminium powder coated door shutters, (minimum thickness of powder coating 50micron) aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws complete all as directed. | 12 | SqM | |
| 24 | 24 | M & L for Anodised aluminium powder coated (Thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 Nos) suitable handle (1 No) complete all as specified and directed. | 12 | SqM | |
| 25 | 25 | S & F 4.8mm thick sheet glass, ordinary quality and glazing with oil putty in squares exceeding 0.5 Sqm in each pane fixed in any position complete all as specified and directed. | 34 | SqM | |
| 26 | 26 | M & L for Aluminium powder coated (Thickness of powder coating 50 micron) Deco grills of Model DG-104 (10mm thick) chequered mesh 75mmx75mm riveted with rivets and fixed with and including suitable aluminium 'U' channel with necessary fixing arrangements complete all as directed. | 12 | SqM | |
| 27 | 27 | M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as directed. | 260 | SqM | |
| 28 | 28 | S & F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 of size 100mm complete all as specified and directed. | 120 | EACH | |
| 29 | 29 | S & F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 of size 75mm complete all as specified and directed. | 30 | EACH | |
| 30 | 30 | S & F extruded aluminium alloy handles fabricated type anodised of size 150mm complete all as directed. | 80 | EACH | |
| 31 | 31 | S & F extruded aluminium alloy handles fabricated type anodised of size 100mm complete all as directed. | 20 | EACH | |
| 32 | 32 | S & F aluminium anodised barrel tower bolt of size 150mm long of extruded section complete all as directed. | 80 | EACH | |
| 33 | 33 | S & F aluminium anodised barrel tower bolt of size 100mm long of extruded section complete all as directed. | 20 | EACH | |
| 34 | 34 | S & F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as directed. | 30 | EACH | |
| 35 | 35 | S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 1000 litres capacity, triple layered, hoisted and fixed in position including dismantling existing water tank complete all as specified and directed. | 10 | EACH | |
| 36 | 36 | S & F in repairs 20mm dia Ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed. | 50 | EACH | |
| 37 | 37 | Supplying and fixing 15mm bore UPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including taking down old GI tubing complete all as specified and directed. | 200 | RM | |
| 38 | 38 | Supplying and fixing 20mm bore UPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including taking down old GI tubing complete all as specified and directed. | 100 | RM | |
| 39 | 39 | S & F in repairs Brass chromium plated shower rose 125mm dia with or without swivel joints, including fixing to steel pipe or union complete all as directed. | 20 | EACH | |
| 40 | 40 | S & F in repairs PVC valveless, syphonic action type, flushing cistern, 10 lit capacity, low level, white, with inlet, ball valve, float and handle including brackets and 32mm bore PVC flush pipe complete all as specified and directed. | 20 | EACH | |
| 41 | 41 | S & F in repairs Vitreous china wash basin, white flat back size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand including 32mm bore PTMT waste coupling, PVC waste pipe complete all as specified and directed. | 15 | EACH | |
| 42 | 42 | S & F in repairs 15mm dia Pillar tap, fancy type chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. | 10 | EACH | |
| 43 | 43 | S & F PVC connection 15mm size with PTMT nuts of length 600mm complete all as directed. | 20 | EACH | |
| 44 | 44 | S & F in repairs 15 mm bore fancy type Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, complete all as specified and directed. | 20 | EACH | |
| 45 | 45 | S & F in repairs 15mm dia fancy type, Stop valve, chromium plated with long shank and cup concealed type screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as directed. | 5 | EACH | |
| 46 | 46 | S & F in repairs Wash down water closet (Pedestal pattern), Vitreous China white, plastic water closet seat of same colour closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. | 9 | EACH | |
| 47 | 47 | S & F in repairs 100mm bore Cast iron 'P' or 'S' trap complete all as directed. | 10 | EACH | |
| 48 | 48 | S & F in repairs hand shower (Health faucet) with 1.0m Long flexible Stainless steel connecting pipe including necessary wall hook for EWC complete all as directed. | 25 | EACH | |
| 49 | 49 | S & F in repairs Stainless steel Toilet roll paper holder box type recessed type complete all as directed. | 20 | EACH | |
| 50 | 50 | S & F in repairs soap dish, chromium plated best quality complete all as specified. | 23 | EACH | |
| 51 | 51 | S & F in repairs corner glass with selected quality glass fancy type including necessary supporting / fixing arrangements fixed in bath rooms complete all as directed. | 20 | EACH | |
| 52 | 52 | S & F in repairs plastic water closet seat cover, black or white closed pattern with flat bottom, and mild steel chromium plated or aluminium hinging device suitable for EWC / anglo indian water closets complete all as specified and directed. | 30 | EACH | |
| 53 | 53 | S & F in repairs Vitreous China Semi-Pedestal pattern Anglo-indian type water closet, white, complete all as specified and directed. | 12 | EACH | |
| 54 | 54 | S & F in repairs Stainless steel friction stay hinges for aluminium side hung type window shutters complete all as specified. | 100 | EACH | |
| 55 | 55 | M & L for Welding in repairs for thickness of metal to be welded not exc 6mm thick, not exc 2.5cm length complete all as specified | 300 | EACH | |
| 56 | 56 | M & L for mild steel framed work such as grills, gratings, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde-E-165 including dismantling existing structural steel work complete all as specified and directed. | 500 | KG | |
| 57 | 57 | M & L for PCC 1:3:6, type C-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as directed. | 2 | CuM | |
| 58 | 58 | Supply and fixing Razor type concertina coil, 9 SWG hot galvanised, spring tensile wire, 145 to 150 N/Sqmm, zinc coating 250 to 300 gr/Sqm, dia of coil 650mm, minimum 10 coils per one runninmg meter after laying, hot dip galvanised razor ribban tape of size 0.5mm thick 19mm wide before wrapping, on central core wire fixed with 1.66mm thick GI clips 25 Nos per Rm and special nut bolts, hold Z coil together and extra 2 rows parallel wire of 10 gauge including necessary scaffolding as required at site and tdismantling old concertina coil complete all as specified and directed. | 1200 | RM | |
| 59 | 59 | S & F Galvanized, 2 strand, steel barbed wire with 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc., including dismantling old fencing wire complete all as specified and directed. [Each line wire to be measured.] | 200 | 100 RM | |
| 60 | 60 | S & F 4mm dia PVC coated MS galvanised chain link fencing of mesh size 50mmx50mm including line wires fixed with any standards, rails, straining bolts, etc including provision of neeesary binding wire including dismantling old chain link fencing complete all as specified and directed by the Engineer-in-Charge. | 1000 | SqM | |
| 61 | 61 | S & F mild steel work as in hand rails, wind ties, fencing posts and struts, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, securing bolts, posts and struts in fencing, etc and similar work conforming to FE-290 Gde E-165 including dismantling old mild steel work complete all as specified and directed. | 1800 | KG |
AI Tender Summary
Tender Timeline
Feb 07, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 28, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 05, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender