Repairs To Roof Sunken Chajja Valley Gutter Etc At Naushakti Vihar Pallava Park Ins Vishwakarma Ctw Bvy And Cqae Under Age Br Ii Of Ge Nd Visakhapatnam
Tender Value
45 Lakhs
Estimated cost
Bid Submission
28 Feb 2020
0 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatnam → Andhra Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairs To Roof Sunken Chajja Valley Gutter Etc At Naushakti Vihar Pallava Park Ins Vishwakarma Ctw Bvy And Cqae Under Age Br Ii Of Ge Nd Visakhapatnam
BOQ
| Name of Work: REPAIRS TO ROOF, SUNKEN, CHAJJA, VALLEY GUTTER, ETC AT NAUSHAKTI VIHAR, PALLAVA PARK, INS VISHWAKARMA, CTW, BVY AND CQAE UNDER AGE B/R - II OF GE [ND] VISAKHAPATNAM | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | The rates quoted by the tenderer shall deemed to be inclusive for the following provisions in addition to the other conditions specified in the tender documents. No claim whatsoever shall be entertained at a later date on this account:-\n[i] The repairs shall be done by skilled workmen in the relevant field to the entire satisfaction of Engineer-in-Charge. The contractor shall engage sufficient manpower for the entire period so that progress of work shall not be hampered due to non availability of labour at any time.\n[ii] The contractor on getting information through Site order / Works diary regarding the nature of repair to be carried out, he shall immediately respond to the same and make all out efforts to carry out the same on priority within 48 hours. In case of any delay in responding / attending the repairs within 48 hours, the GE may at his absolute discretion impose penalty on the contractor at Rs. 100/- per day per each work ordered upto 05(Five) days and Rs. 200/- per day thereafter till completion of the work in case of delay without valid reasons as decided by GE.\n[iii] Further, the above penalty is applicable even for the multiple locations of work at the same period. It is the responsibility of contractor to make suitable arrangements for attending the repairs simultaneously at all the places.\n[iv] The decision of the GE as to whether a particular repair has been attended or not on a particular day will be final and binding. The above penalty shall be in addition to the provisions made in clause 50 of IAFW-2249 i.e (Compensation for delay in completion of work). | |||
| 2 | 2 | Taking down cement plaster on brick work or stone masonry walls, etc including raking out joints, hacking for key, scrubbing down with water, etc complete all as directed. | 400 | SqM | |
| 3 | 3 | M & L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces mixed with and including cement water proofing compound @ 2% by weight of cement, finished even and smooth with out using extra cement complete all as directed. | 125 | SqM | |
| 4 | 4 | M & L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed. | 200 | SqM | |
| 5 | 5 | M & L for rendering 5mm thick in CM 1:3 on fair faces of ceiling surfaces finished even and smooth with out using extra cement complete all as directed. | 75 | SqM | |
| 6 | 6 | M & L Vitrified Ceramic tiles 8 to 10mm thick (square/ rectangular) polished, coloured (double charged) area of each tile not exceeding 0.36 Sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tiles laid over and including 15mm thick screed bed in CM 1:4 including dismantling existing tiles complete all as specified and directed. | 100 | SqM | |
| 7 | 7 | M & L for coloured joint free Non skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in CM 1:4 including dismantling existing tiles complete all as specified and directed. | 250 | SqM | |
| 8 | 8 | M & L coloured Glazed ceramic tiles of size 450x350x7mm thick as in vertical surfaces such as skirtings, dados and risers of steps, etc. set and jointed in neat cement slurry and pointed in white or colour cement to match with shade of tiles laid over and including 10mm thick backing coat in CM 1:3 including dismantling existing tiles complete all as specified and directed. | 250 | SqM | |
| 9 | 9 | Renewing tiles in patches, area n exc 5 Sqm including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specified and directed by the Engineer-in-Charge. [Note: New tiles if required shall be paid separately as supply only under relevant items. However, screed bed / backing coat for fixing tiles is deemed to be included in the unit rate] | 250 | SqM | |
| 10 | 10 | Supply only Non skid ceramic tiles 7 to 8mm thick of size 400x400mm | 400 | EACH | |
| 11 | 11 | Supply only Non skid ceramic tiles 7 to 8mm thick of size 300x300mm | 50 | EACH | |
| 12 | 12 | Supply only glazed ceramic tiles 7 to 8mm thick of size 450x350mm | 200 | EACH | |
| 13 | 13 | S & F 18 to 20mm thick Granite (of any type) tiles machine cut, as in skirting / dado bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over and including 10mm thick backing coat in CM 1:4 including dismantling existing tiles complete all as specified and directed. | 30 | SqM | |
| 14 | 14 | S & F 10 to 12mm thick Granite (of any type) tiles machine cut, as in skirting / dado bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over and including 10mm thick backing coat in CM 1:4 including dismantling existing tiles complete all as specified and directed. | 50 | SqM | |
| 15 | 15 | M & L for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 using old size bricks including demolition of old brick work complete all as specified and directed. | 3 | CuM | |
| 16 | 16 | M & L for brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 using old size bricks including demolition of old brick work complete all as specified and directed. | 25 | SqM | |
| 17 | 17 | M & L for RCC 1:1.5:3, type A-1 using 20mm graded stone aggregate as in chajjas and similar suspended work including demolition of existing concrete complete all as specified and directed. | 1 | CuM | |
| 18 | 18 | M & L for RCC 1:1.5:3, type A-1 using 20mm graded stone aggregate as in fins, facia, louvers, parapets and similar work including demolition of existing concrete complete all as specified and directed. | 1 | CuM | |
| 19 | 19 | Use and waste of formwork to sides and soffits of chajjas and similar work including edges for rough finished surfraces of concrete flat complete all as specified and directed. | 10 | SqM | |
| 20 | 20 | Use and waste of formwork to fins, facia, louvers, parapets and similar work for rough finished surfraces of concrete flat complete all as specified and directed. | 12 | SqM | |
| 21 | 21 | M & L for TMT bars 6mm to 8mm dia, as in reinforcement cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed. | 50 | KG | |
| 22 | 22 | M & L for TMT bars 10mm dia and over, as in reinforcement cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed. | 130 | KG | |
| 23 | 23 | Complete removal of existing roof treatment including concrete sub base, roughening the surfaces including M & L for brushing cleaned roof surfaces with neat cement slurry @3kg/ Sqm and applying 5mm thick cement screed in cement mortar 1:4 mixed with and including water proofing compound @ 2% by weight of cement, applying polymeric water proofing membrane of weight not less than 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non wwoven fabric (weight not less than 150 gms/Sqm) including coating the surface with water based bituminous primer @ 0.5 lit / Sqm and hot blown bitumen @ 1.20 Kg/Sqm at the bottom and another coat at top of the membrane and finally finished with one coat of bitumineous aluminium primer at 100 grams/Sqm complete all as specified and directed by the Engineer-in-Charge.\n | 500 | SqM | |
| 24 | 24 | M & L for 25mm thick PCC 1:2:4, type B-0 using 12.5mm graded stone aggregate as in levelling course in roof before applying water proof treatment complete all as directed | 500 | SqM | |
| 25 | 25 | M & L for Repairs to damaged RCC surfaces of chajjas, soffits of slabs, beams, columns, cantilever slabs, beams, columns, fins, stair cases, railing, etc at any height and in any position including cutting / chipping the spalling concrete surfaces and applying epoxy treatment for bonding new or old concrete surfaces and providing welded steel wire fabric mesh 75x25mm of weight not less than 4.0 Kg/Sqm on prepared surface with suitable pins/clamps/ welding to the existing reinforcement and applying polymer modified cementous coating on concrete surfaces prepared for guniting and finished with 40mm thick (25mm thick average) pressure Guniting in Cement mortar 1:3, applied by pressure hoses finishing the plastered surfaces with two coats of cement base paint over a coat of primer complete all as specified and directed. [Note: Quoted rate is deemed to be inclusive for work at height and location including cost of scaffolding] | 150 | SqM | |
| 26 | 26 | S & F 110mm bore PVC (SWR) soil, waste and rain water pipes, Single socketed in any length with rubber ring joints fixed to walls including taking down old pipes complete all as specified and directed. | 100 | RM | |
| 27 | 27 | S & F 75mm bore PVC (SWR) soil, waste and rain water pipes, Single socketed in any length with rubber ring joints fixed to walls including taking down old pipes complete all as specified and directed. | 50 | RM | |
| 28 | 28 | M & L for 110mm bore PVC (SWR) bends any radius with oval access door complete all as specified. | 10 | EACH | |
| 29 | 29 | M & L for 75mm bore PVC (SWR) bends any radius with oval access door complete all as specified. | 15 | EACH | |
| 30 | 30 | M & L for 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified. | 5 | EACH | |
| 31 | 31 | M & L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directetd. | 125 | SqM | |
| 32 | 32 | M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directetd. | 75 | SqM | |
| 33 | 33 | M & L for preparation of newly plastered surfaces of wall and applying 3mm thick wall care putty for making good undulations to obtain smooth surface and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed. | 200 | SqM | |
| 34 | 34 | M & L for preparation of old decorated surfaces of walls by brooming down, brushing and applying one coat of white wash complete all as spcified and directed. | 5000 | SqM | |
| 35 | 35 | M & L for preparation of old decorated surfaces of ceiling by brooming down, brushing and applying one coat of white wash complete all as spcified and directed. | 1000 | SqM | |
| 36 | 36 | M & L for preparation of old decorated surfaces of walls by brooming down, brushing and applying one coat of colour wash complete all as spcified and directed. | 1000 | SqM | |
| 37 | 37 | M & L for preparation of old decorated surfaces of walls by washing, rubbing down and stopping of painted surfaces and applying one coat of distemper oil emulsion complete all as directed. | 8000 | SqM | |
| 38 | 38 | Complete removal of existing treatment on walls, preparation of surfaces and applying 3mm thick wall care putty for making good undulations to obtain smooth surface and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed. | 3000 | SqM | |
| 39 | 39 | M & L for preparation of old decorated surfaces of walls by washing, rubbing down and stopping of painted surfaces and applying one coat of cement base paint complete all as directed. | 6000 | SqM | |
| 40 | 40 | M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specifed and directed. | 2000 | SqM | |
| 41 | 41 | M & L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specifed and directed. | 2500 | SqM | |
| 42 | 42 | M & L for preparation of old painted surfaces of walls of any description, not otherwise described, over 10cm in width or girth and applying one coat of exterior weather proof (100% Acrylic emulsion) paint complete all as specifed and directed. | 6000 | SqM | |
| 43 | 43 | M & L for complete removal of existing treatment on external wall surfaces and preparation of surfaces and applying 3mm thick wall care putty for making good undulations to obtain smooth surface and applying two coats of weather proof (100% Acrylic emulsion) paint exterior grade over a coat of primer complete all as specified and directed. | 5000 | SqM | |
| 44 | 44 | M & L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm in width or girth and applying one coat of aluminium paint complete all as specifed and directed. | 2000 | SqM | |
| 45 | 45 | M & L for writing letters or figures (Block, Roman, Italic and Indian) not exc 30cm high on wall surfaces boldly and solidly without showing signs of brush marks complete all as specified and directed by the Engineer-in-Charge. | 30 | Per 10 Nos Per CM height | |
| 46 | 46 | S & F Pre-painted galvalume aluminium zinc coating GI based corrugated / 'Z' profile steel sheet of 0.50mm thick, any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete including dismantling existing sheets in roof coverings complete all as specified and directed. | 100 | SqM | |
| 47 | 47 | S & F 0.8mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 including dismantling old mild steel sheeting of any description complete all as specified. | 50 | SqM | |
| 48 | 48 | S & F 8mm thick Polycarbonate translucent sheet corrugated sheet with two corrugation side lap fixed with coach screws and washers in roofs, walls complete all as directed by the Engineer-in-Charge | 150 | SqM | |
| 49 | 49 | S & F false ceiling grid 600x600mm comprising of powder coated Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with clips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre suitable for and including 12mm thick gypsum board of size 595x595mm duly applying two coats of plastic emulsion paint over a coat of primer including dismantling old false ceiling complete all as specified and directed by the Engineer-in-Charge. | 100 | SqM | |
| 50 | 50 | S & F in repairs aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm fixed with aluminium wire staples complete all as specified and directed. | 10 | SqM | |
| 51 | 51 | S & F 3.0mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane fixed in any position including hacking out old broken glass complete all as specified and directed. | 7 | SqM | |
| 52 | 52 | M & L for PCC 1:5:10, type E-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete as in sunken floors including demolition of old concrete complete all as specified. \n[Notes: Quoted rate is inclusive for \n(i) Demolition of WC, traps, sanitary connections and removing all debris outside defence land. \n(ii) Sealing the gaps / joints between WC and flooring, joints of nahani trap & connecting pipes with sealent as recommended by the manufacturer | 2 | CuM | |
| 53 | 53 | Removal of existing sunken floor treatment including taking out of cement plaster and preparation of surfaces with wire brushes, cleaning with water and applying epoxy treatment with one coat of NITO proof chemical to bottom and sides as per manufacturers instructions and providing 15mm thick plaster in CM 1:3 mixed with and including water proofing compound @ 3% by weight of cement to cover entire portion of epoxy coating including testing the sunken floor for 48 hours duly filled with water complete all as per manufacturers instructions and as directed by the Engineer-in-Charge. [Note: The work shall be executed by authorised agency of the chemical] | 10 | SqM | |
| 54 | 54 | Repairs / overhauling and servicing of rolling shutters including replacement of worn out components such as hood cover, laths, ball bearings, helical wire spring, lock plates, brackets, plates, shaft rod, straightening of existing laths including greasing and refixing the same in original position complete all as directed by the Engineer-in-Charge. | 300 | SqM |
AI Tender Summary
Tender Timeline
Feb 07, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 28, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 05, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender