Supply And Installation And Commissioning Of Equipments And Machines To Hailakandi Polytechnic, Hailakandi Polytechnic-Assam

Supply And Installation And Commissioning Of Equipments And Machines To Hailakandi Polytechnic -1 All Geared Precision Lathe Machine With Hardended Guideways, Hardened & Profile Ground Head Stock Gears Complete With The Following Standard Accessories:- Electric Motor, R / F Switch, ‘V’ Belts, 2 Mt, Centres With Centre Bush, Inch & Mm Gears, Oil Can, Spanner & Allen Key Set & Instruction Manual.Along With Acessories 2 Heavy Duty All Geared Shaping Machine Complete With Swivelbase Vice, Automatic Lubrication, Electricals & Guards Alongwith Accessories 3 All Geared Universal Milling Machine With Longitudinal Feed Automatic Alongwith Accessories 4 Pillar Drilling Machine Alongwith Accessories 5 Hydraulic Hacksaw Machine Complete With Standard Accessories: Electric Motor, Starter, Hydraulic Pump, Unit, Mechanical Coolant Pump With Fittings, ‘V’ Belts, Right Angle Vice & Gauge Stop 6 Pedestal Grinding Machine 7 Tools For Machine Shop 8 Hand Drilling Machine 9 Calipers 10 Steel Rule, 12” 11 V Calipers 6” 12 Micrometer Inside 13 Micrometer Outside 14 Digital Vernier Caliper 15 Filler Gauge 26 Blade 16 Combination Set 17 Reamer No.13 18 Tap And Die Set 19 Adjustable Spanner, 12” 20 Machine Tools 21 Wood Turning Lathe 22 Surface Planer Machine 23 Circular Saw Machine 24 Jig Saw Machine 25 Wooden Grinding Machine 26 Disc Sander 27 Measuring Tools 28 Marking Gauge, 12” 29 Four Fold Rule 30 Steel Tape, 3 Meter 31 Try Square, 12” 32 Spirit Level 33 Steel Rule 12” 34 Cutting Tools 35 Tennon Saw 36 Firmer Chisel 37 Mortise Chisel 38 Planning Tools 39 Metal Jack Plane 40 Drill Bits 1 / 8” To ½ “, 10 Pc Set 41 Claw Hammer 42 Mallet Hammer 43 Ball Peen Hammer, 800 G 44 Holding Tools 45 Bench Vice No.4 46 Screw Driver 47 Pincer 8” 48 Scraper 49 Oil Stone 50 Circular Saw Machine Along With Accessories 51 Wood Working Machine Along With Accessories 52 Arc Welding Machine, 400 A Along With Accessories 53 Tig / Mma Pulse Welding Power Source Along With Accessories 54 Mig / Mag Welding M / C, ( 50-400 Amps ) 55 Welding Motor Generator Set 56 Spot Welding Machine 57 Multiprocess Inverter Based Dc Welding Machine Along With Accessories 58 Gas Welding Set. 59 Hand Tools 60 Hand Shield 61 Welding Helmet 62 Welding Goggles 63 Chipping Hammer 64 Pliers 7” 65 Measuring Tape 3 Mtr 66 Steel Rule 12” 67 Hand Gloves 68 Ball Peen Hammer, 800 G 69 Cross Peen Hammer 800 G 70 Pedestal Grinding Machine 71 Bench Grinding Machine 72 Hand Drilling Machine 73 Holding Tools 74 Bench Vice No.4 75 Hand Vice 76 Pipe Vice No.3 77 Pin Vice 78 G Clamp 6” 79 Striking Tools 80 Ball Peen Hammer, 800 G 81 Straight Peen Hammer, 1Kg 82 Cross Peen Hammer 800 G 83 Cutting Tools 84 Flat Chisel 85 Round Nose Chisel 86 Solid Frame Hack Saw 87 Adjustable Frame Hacksaw 88 10” Flat Files 89 10” Square Files 90 10” Triangular Files 91 Scraper, 8” 92 Tap And Die Set ¼ To ½ 93 Drill Bits 1 / 8” To ½ “, 10 Pc Set 94 Hacksaw Blade 95 Tin Cutter 96 Marking / Measuring Tools 97 Steel Rule, 12” 98 Try Square, 12” 99 Scriber 100 Combination Set 101 Calipers, 10” 102 Divider 10” 103 V Block 104 Rectangular Refractory Furnace ( Deluxe Model ) ; 105 Permeability Tester [ Electric ] Along With Accessories 106 Sand Siever 107 Sand Rammer 108 Moulding Boxes 109 Aluminum Molding Box 12X12x41 / 2 110 Aluminum Molding Box 16X16 / 41 / 2 111 Flasks 112 Ms Jacket 12X12x41 / 2 113 Ms Jacket 16X16x41 / 2 114 Anvil 100 Kg ( Single Horn ) 115 Lee Vice. Table Size - 15 X 24, Jaw Size - 8 X 30 116 Round Tongs Length-18” 117 Square Tongs. Length-18” 118 Flat Tongs. Length-18” 119 Pick-Up Tongs. Length-18” 120 Side Tongs, Length-18” 121 Ring Tongs, Length-18” 122 Flatter 2 X 2X 3 123 Top Fuller. ¼ To L 124 Bottom Fuller. ¼ To 1 125 Hammer With Handle Ball Peen 500G. Make: Taparia 126 Hammer With Handle Ball Peen 750G Make: Taparia 127 Hammer With Handle Ball Peen L Kg 128 Double Faced Sledge Hammer 3 .5Kg ( 7 Lbs ) 129 Hot Chisel, Cutting Edge Angle-30º Length- 6 & 8 130 Cold Chisel, Cutting Edge Angle-30º Length- 6 & 8 131 Swage Block. 12X 12 X 4 132 Poker 300 133 All In One 3D Printer Assembly Kit With Laser Engraving And Cnc Carving 134 3D Scanner 135 Interactive Physics Simulation Software- 5 Users License 136 Young S Modulus Apparatus Searles Pattern With Brass Frame 137 Post Office Box Plug Type With Maganin Coil Three Ratio 138 Resistance Box Plug, 139 0.1 To 1 140 1 To 10 Ohm, 141 1 To 1000 Ohm, 142 Leclanche Cell:- 143 Ammonium Chloride Salt 144 Moment Of Inertia Table :- 145 Optical Bench ( Metal Double Rod ) Complete Accessories Such As Upright, Rod Stand Etc. 146 Vibration Magnetometer 147 Complete Set Up Drawing The Static Characteristic Curves Of A Semiconductor Diode And Hence To Determine It Dc And Ac Resistances For A Given Current 148 Rheostat 149 Rheostat ( Oxidized Eureka Constantan Wire Current : 4A Range : 20 Ohms ) 150 Rheostat ( Oxidized Eureka Constantan Wire Current : 1.8 A Range : 110 Ohms ) 151 Rheostat ( Oxidized Eureka Constantan Wire Current : 1.8 A Range : 100 Ohms ) 152 Rheostat ( Oxidized Eureka Constantan Wire Current : 1.6 A Range : 125 Ohms ) 153 Barton’S Vertical Apparatus Or ( Torsion Apparatus ) , 154 Spherometer, Brass, 155 Vernier Calliper, 156 Screw Gauge ( Micrometer ) , Sand Blasted, L.C.1 / 100Mm, 25Mm, 157 Potentiometer 158 Meter Bridge ( Wheatstone Bridge ) , 159 Stop Watch, 160 Thermometer ( 30Cm Length ) , 161 Pencil Jockey Insulated Handle Knife Edge Brass Constact And A Plated Terminal 162 Magnifier ( Metal Frame ) , 3”, 163 Copper Wire ( Dcc Wire ) Double Cotton 164 Galvanometer, ( Dc With Stand ) Range:30-0-30 Div 165 Voltmeter Square Dial, 166 Ammeter Square, 167 Concave Lens ( Regular Quality ) , 168 Convex Lens ( Regular Quality ) , 169 Newton’S Ring Apparatus 170 Intermediate Spectrometer 6 S.S.Scale, 171 Spectrometer Prism, 172 32 X32 Mm 173 38 X 38 Mm 174 Reading Telescope College Pattern :- 175 Optical Stand Ss Rod ( 600Mm ) With Base Clamp For Holding Optical Needle 176 Bar Pendulum Compound, 177 Joules Calorimeter ( 3X2 ) 178 Newton’S Law Of Cooling Apparatus:- 179 Ramsden Eyepiece 10X With Holder, 180 Commutator, Brass ( Four Way Plug Key ) , 181 Measuring Cylinders Plastic, 182 Desktop Computer 183 Mono Network Laser Printer 184 Electronic Balance Capacity: 600 Gm 185 Physical Balance With Weight Box Capacity: 250 Gm Nresolution: 0.2 Mg 186 Distilled Water Plant 187 Hot Air Oven 188 Water Bath, Thermostatic Rectangular Water Bath With 12 Holes 189 Rotary Shaker 190 Ph Meter 191 Digital Conductivity Meter With Probe 192 Magnetic Stirrer 193 Heating Mantle 194 100Ml 195 250Ml 196 500Ml 197 Magnetic Stirrer With Hot Plate 198 Muffle Furnace Rectangular ( Laboratory Model ) , Dimension ( Wxhxd ) : 100X100x300 199 Digital Nephelo Meter 200 Uv- Visible Spectrophotometer 201 Thermometer 202 Model Chem Lab – 10 Users License 203 Digital Potentiometer 204 Dektop Pc - Intel Core I3 Processor, 500 Gb Hdd, 4 Gb Ddr Ram, 18.5Tft 205 Volumetric Flask ( 100Ml ) Measuring With Plastic Stopper 206 Volumetric Flask ( 250Ml ) Measuring With Plastic Stopper 207 Wire Gauze 208 Connical Flask -250 Ml 209 Connical Flask -500 Ml 210 Beaker ( 100Ml ) 211 Beaker ( 250Ml ) 212 Beaker ( 500Ml ) 213 Beaker ( 1000 Ml ) 214 Pipette ( 10 Ml ) 215 Pipette ( 20 Ml ) 216 Pipette ( 25 Ml ) 217 Pipette Stand, Capacity : 28No’S X 28Ml 218 Pyknometer ( Specific Gravity Bottle ) With Thermometer 25Ml 219 Pyknometer ( Specific Gravity Bottle ) With Thermometer 10Ml 220 Reagent Bottle 250Ml 221 Reagent Bottle 500Ml 222 Reagent Bottle 1000Ml 223 Reagent Bottle 2000Ml 224 Burette ( 50 Ml ) Screw Type Rota Flow Stopcock With Ptfe ( Teflon Key ) 225 Burette Stand With Clamp 226 Test Tube 227 Test Tube Holder 228 Weighing Bottle 20 Ml 229 Test Tube Stand. Capacity 20 No’S Of Test Tubes 230 Measuring Cylinder ( 25Ml ) 231 Measuring Cylinder ( 50Ml ) 232 Measuring Cylinder ( 100Ml ) 233 Measuring Cylinder ( 250Ml ) 234 Measuring Cylinder ( 500Ml ) 235 Measuring Cylinder ( 1000Ml ) 236 Funnel, Diameter 100Mm 237 Bunsen Burner For L.P.G Connection 238 Silica Crucible With Lid 25Ml. 239 Tong 6” 240 Dropper With Rubber Teat 241 Tripod Stand 242 Stirring Rod 243 Lpg Gas Cylinder 244 Desktop Computer Along With Computer Table 245 10 Kva On-Line Ups Systems With Inbuilt Isolation Transformer With 30 Minutes Battery Back-Up Time Using Smf Batteries, Rack & Interlinks 246 Mono Network Laser Printer 247 Color Laser Printer 248 Multimedia Projector With Screen 4×6 Tripod Stand 249 Calibration Of Miliammeter As Voltmeter 250 Calibration Of Milivoltmeter As Ammeter 251 Characteristics Of Filament Lamp 252 Ohmic And Effective Resistance Measurement 253 Electrical & Electronic System Trainer Along With Dc, Ac & Wave Shaping Circuit Experiment Panel 254 Study Of Star & Delta Balance Load 255 Measurement Of Power By Wattmeter. 256 Half Wave / Full Wave Rectifier Circuit 257 Electrical & Electronic System Trainer Along Semiconductor & Power Semiconductor Devices Experiment Panel 258 Wiring Using Switch, Fuse, Indicator, Lamps And Energy Meter. 259 30 Mhz Cathode Ray Oscilloscope 260 Digital Multimeter 261 Digital Clamp Meter 262 Model Of Triangle & Parallelogram Of Forces Apparatus Nslotted Weight Set : Iron Nickelled: 4 Weight & 1 Hanger ( 500 Gms ) 263 Model Of Polygon & Triangle Of Forces Apparatus Nslotted Weight Set : Iron Nickelled: 4 Weight & 1 Hanger ( 500 Gms ) 264 Apparatus To Study Equilibrium Of Non Concurrent Forces Nslotted Weight Set : Iron Nickelled: 4 Weight & 1 Hanger ( 500 Gms ) 265 Model Of Moments Disc Apparatus ( With Weights ) With Physical Weight Set 500 Gm & 250 Gm – Each ) 266 Model Of Friction Slide Apparatus Superior Quality With Weights, Physical Weight Box ( 500Gms ) 267 Model Of Inclined Plane ( Normal Quality ) ( With Weights ) , Physical Weight Box ( 500Gms ) 268 Screw Jack Small Size 269 Model Of Simple Pendulum 270 Model Of Bar Pendulum Or Compound Pendulum 271 Model Of Moment Of Inertia Of Flywheel ( Dia- 15 Cm ) With Weight: 2 Kg ( Conical ) 272 Model Of Apparatus To Find Center Of Gravity 273 Model Of Centrifugal Force Apparatus 274 Slotted Weight Set: Iron Nickelled: 4 Weight & 1 Hanger 275 A. 20 Gms 276 B. 50 Gms 277 C. 100 Gms 278 D. 200 Gms 279 Apparatus For Reaction Of Forces In Beam 20 Kg Balance, 280 Model Of Bell Crank Lever With Weights, 281 Model Of Compound Lever 282 Model Of Jib Crane With Iron Base & Tubular Type Compression Balance & Slotted Weights, 283 Model Of Rope Brake & Dynamometer 284 Universal Force Table ( Superior ) 285 Young Modulus Of A Metal Rod By An Interference Method 286 Prismatic Compass 4”Dia In Fiber Case With Telescopic Aluminum Stand In Case 287 Ranging Rod Telescopic In Case 288 2 Metre 289 3 Metre 290 Measuring Tapes 291 Cloth In Case 30 Meter 292 Steel 30 Meter, 293 Planimeter In Wooden Box With Calibration Chart 294 Digital Planimeter Along With Accessories 295 Chains 296 Metric Chain 297 Guntess / Surveyors Chain 298 Engineers Chain 299 Reverse Chain 300 Leveling Staff 301 Dumpy Level 12”If In Wooden Box With Telescopic Aluminum Stand In Case 302 Automatic Level Along With Accessories 303 Plane Table Fitted With Non Magnetic Metel Plate With Wooden Stand 304 Alidade In Wooden Box 18” 305 Accessories: Plumb Bob, U-Fork, Magnet, Treble Tube 306 Transit Venires Theodolite 20 Sec Accuracy In Wooden Box With Accessories And Telescopic Aluminum Stand With Manual 307 Electronic Theodolite Along With Accessories 308 Electronic Total Station Along With Accessories 309 Pycnometer 310 Density Bottle 311 Sieve Shaker – Motorised 312 Standard Test Sieves Technical Specification: 313 200 Mm Dia, Spun Brass Frames Size 4.75Mm, 314 200 Mm Dia, Spun Brass Frames Size 2.36Mm, 315 200 Mm Dia, Spun Brass Frames Size 2.00Mm, 316 200 Mm Dia, Spun Brass Frames Size 1.18Mm, 317 200 Mm Dia, Spun Brass Frames Size 600 Micron, 318 200 Mm Dia, Spun Brass Frames Size 425 Micron, 319 200 Mm Dia, Spun Brass Frames Size 300Mic, 320 200 Mm Dia, Spun Brass Frames Size 150Mic, 321 200 Mm Dia, Spun Brass Frames Size 75Mic 322 200 Mm Dia, Spun Brass Frames Size Lid & Pan 323 300 Mm Dia, Spun Brass Frames Size 9.50Mm 324 300 Mm Dia, Spun Brass Frames Size 4.75Mm, 325 300 Mm Dia, Spun Brass Frames Size 2.36Mm, 326 300 Mm Dia, Spun Brass Frames Size 2.00Mm, 327 300 Mm Dia, Spun Brass Frames Size 1.18Mm, 328 300 Mm Dia, Spun Brass Frames Size 600 Micron, 329 300 Mm Dia, Spun Brass Frames Size 425 Micron, 330 300 Mm Dia, Spun Brass Frames Size 300Mic, 331 300 Mm Dia, Spun Brass Frames Size 150Mic, 332 300 Mm Dia, Spun Brass Frames Size 75Mic 333 300 Mm Dia, Spun Brass Frames Size Lid & Pan 334 Water Still 4 Litre / Hour 335 Liquid Limit Device, Hand Operated With Counter 336 Hydraulic Extruder ( Motorised ) 337 Plastic Limit Apparatus Conforming To Is:2720 ( Part V ) 338 Shrinkage Limit Apparatus, Conforming To Is:10077, Is:2720 ( Part Vi ) 339 Glass Thermometer 0-150 °C 340 Electronic Balance 6 Kg. Capacity With Accuracy 0.5 Gm. 341 Spatula 342 Spatula 150 Mm Blade With Wooden Handle 343 Spatula 290 Mm Blade With Wooden Handle 344 Sand Pouring Cylinder, ( Large ) Along With Accessories 345 Core Cutter 346 Universal Triaxial Cell 347 Compression Testing Machine 348 Direct Shear Apparatus ( Motorized ) 349 Universal Permeameter Is:2720 ( Part-17 ) , Is 11209 350 Variable Flow Type Air Permeability 351 Cement Autoclave Is : 4031-1968 Along With Accessories 352 Aggregate Impact Test Apparatus With Counter 353 Density Basket 354 Vicat Apparatus, With Dashpot 355 Gauging Trowel Bs:12, Is:4031, Is : 10086-1982 356 Trowel Is:4031 - 1968, Is : 10086-1982 357 Steel Bowl ( Medium ) 358 Plastic Tray Medium Size 359 Plastic Measuring Jar 10 Ml. 360 Plastic Measuring Jar 25 Ml. 361 Plastic Measuring Jar 50 Ml. 362 Plastic Measuring Jar 100 Ml. 363 Plastic Measuring Jar 1000 Ml. 364 Density Bottle 365 Le-Chatelier Flask 1000 Ml. 366 Le Chatelier Mould, Conforming Is : 5514-1969 367 Le Chatelier Water Bath. 368 Hot Plate 369 Steel Vessel 250 Mm Dia. 370 Cube Mould 371 Sieves 200 Mm Dia ( 8” Dia ) Spun Brass Frame Sieve Sizes : 372 4.75 Mm, 373 2.36 Mm, 374 1.18 Mm, 375 600 Mic, 376 300 Mic, 377 150 Mic, 378 75 Mic, 379 Lid And Pan. 380 Sieves 200 Mm Dia ( 8” Dia ) Spun Brass Frame Sieve 381 Compaction Factor Apparatus 382 Cube Mould ( 150 Mm ) 383 Cube Mould ( 100 Mm ) Non Isi Mark 384 Cylindrical Mould 150 Mm Dia X 300 Mm High, Cast Iron. 385 Beam Mould 150 Mm X 150 Mm X 700 Mm Made Of Cast Iron. 386 Beam Mould 100 Mm X 100 Mm X 500 Mm Made Of Cast Iron. 387 Moisture Cup Medium Size 388 Sieve Shaker – Motorised 300Mm Dia Adopter For The Above Sieve Shaker Timer For Above Sieve Shaker 389 Ultrasonic Thickness Gage 390 Laboratory California Bearing Ratio Test Apparatus, 391 Mild Steel, Zinc Plated Mould, 150Mm Id X 175Mm 392 Mild Steel, Zinc Plated Perforated Base Plate For Ms Mould 393 Mild Steel Zinc Plated Extension Collar 150Mm Id X 50Mm High 394 Sand Pouring Cylinder Apparatus, 100Mm Dia. Ref. Standard Is:2720 ( Part 28 ) 395 Sand Pouring Cylinder Apparatus, 396 Sieve Shaker 397 Sieve G.I. Frame 45Cm Dia X 125Mm 398 ( I ) Sieve G.I. Frame 45Cm Dia X 106Mm 399 ( Ii ) Sieve G.I. Frame 45Cm Dia X 100Mm 400 ( Iii ) Sieve G.I. Frame 45Cm Dia X 90Mm 401 ( Iv ) Sieve G.I. Frame 45Cm Dia X 80Mm 402 ( V ) Sieve G.I. Frame 45Cm Dia X 75Mm 403 ( Vi ) Sieve G.I. Frame 45Cm Dia X 63Mm 404 ( Vii ) Sieve G.I. Frame 45Cm Dia X 53Mm 405 ( Viii ) Sieve G.I. Frame 45Cm Dia X 50Mm 406 ( Ix ) Sieve G.I. Frame 45Cm Dia X 45Mm 407 ( X ) Sieve G.I. Frame 45Cm Dia X 40Mm 408 ( Xi ) Sieve G.I. Frame 45Cm Dia X 37.5Mm 409 ( Xii ) Sieve G.I. Frame 45Cm Dia X 31.5Mm 410 ( Xiii ) Sieve G.I. Frame 45Cm Dia X 26.5Mm 411 ( Xiv ) Sieve G.I. Frame 45Cm Dia X 25Mm 412 ( Xv ) Sieve G.I. Frame 45Cm Dia X 22.4Mm 413 Los Angeles Abrasion Testing Machine 414 Aggregate Impact Tester For Determining The Aggregate Impact Value 415 Compaction Test Apparatus Manual -Light Compaction Made Of Mild Steel Compaction Test Apparatus Manual-Heavy Compaction Made Of Mild Steel 416 Universal Penetrometer 417 Ductility Testing Machine With Digital Temp Indicator 418 Flash Point ( Closed ) Pensky-Martens Apparatus 419 Thermometer 420 ( I ) Thermometer Ip 15C Range 5°C To +110°C 421 ( Ii ) Thermometer Ip 16C Range 90°C To +370°C 422 ( Iii ) Thermometer Ip 8C, Range 0°C To 45°C 423 ( Iv ) Thermometer Ip 9C, Range 40°C To 85°C 424 ( V ) Thermometer Ip 10C, Range 76°C To 122°C 425 Standard Tar Viscometer 426 Brinell Cum Rockwell Hardness Tester, Rockwell Scales - A, B, C 427 Electronic Universal Testing Machine With Std. Accessories, Capacity: 600Kn, Along With Computer , Ups & Printer Along With Accessories 428 Impact Testing Machine 429 Hydraulic Bench 430 Impact Of Jet 431 Methods Of Flow Measurement 432 Losses Due To Friction In Pipe Lines 433 Losses Due To Pipe Fittings, Sudden Enlargement And Contraction 434 Bernoulli’S Theorem 435 Reynolds Apparatus 436 Discharge Over Notches 437 Experimental Flume 438 Bending Moment In A Beam 439 Shear Force In A Beam 440 Parabolic Arch Analysis Apparatus ( Two Pinned And Fixed Arch Apparatus ) 441 Euler Buckling Of Struts. 442 Three Pinned Arch 443 Two Pinned Arch Apparatus 444 Plastic Bending Of Beams 445 Tools Sets Testers-30 Nscrew Driver Sets-30 Npliers-30 Nwire Cutter-30 Nhand Drill-3 Ndrill Bits- 10 Sets Nsoldering Stations- 3 Nos Nvarious Cutting Tools N 446 Consumables Wires- Different Types And Sizes Npvc Pipes Nscrews And Gutkas Nlamps Nholders Nfluorescent Lamps Nswitches –Different Types Nregulators Nfuses Nindicators Nboards Nmcbs Nbus Bar Etc N 447 Meters Multimeter-10 Nos Ninsulation Tester-2 Nos Ntong Tester- 2 Nos Nammeters-10 Nos Nvoltmeters -10 Nos N 448 Electrical & Electronic System Trainer Master Unit 449 Experimental Panels Compatible To The Above Electrical And Electronics System Trainer 450 Magnetism, Electromagnetism And Transformer Experiment Panel 451 Dc, Ac & Wave Shaping Circuit Experiment Panel 452 Bead Board Panel Of 1680 Tie Points 453 Cathode Ray Oscilloscope: 454 Digital Multimeter 455 Electrical & Electronic System Trainer Master Unit 456 Experimental Panels Compatible To The Above Master Unit 457 Semiconductor & Power Semiconductor Devices Experiment Panel 458 Transistor Experiment Panel For H Parameters, Thermal Statility, Cb / Cc / Ce 459 Discrete Component Panel ( Dcp ) 460 Bead Board Panel Of 1680 Tie Points 461 Rectifier, Filter, Zener Regulator Experiment Panel 462 Dc, Ac & Wave Shaping Circuit Experiment Panel 463 Analog Digital Trainer 464 Experimental Panels Compatible To The Above Analog Digital Trainer 465 Panel For Digital Ic Trainer 466 Digital Logic ( Basic Logic Gates ) Experiment Panel. 467 Flip-Flop And Counters Experiment Panel 468 Half / Full-Adder-Subtractor Experiment Panel 469 Multivibrator & Oscillator Experiment Panel 470 Cathode Ray Oscilloscope: 471 Digital Multimeter 472 Experimental Set Up For 1 ) Occ Of Dc Shunt Generator 2 ) Load Test Of Dc Shunt Generator 473 Experimental Set Up For 1 ) Brake Test On Dc Shunt Motor. 2 ) Separation Of Losses In Dc Shunt Motor 474 Experimental Set Up For Brake Test On Dc Series Motor Along With Accessories. 475 Experimental Set Up For : 1 ) Swinburne’S Test 2 ) No Load & Speed Control Of Dc Shunt Motor 476 Experimental Set Up For Hopkinson’S Test On Dc Shunt Machines Along With Accessories. 477 Experimental Set Up For Retardation Test On Dc Shunt Motor Along With Accessories. 478 Dc Thyristor Controlled Regulated Power Supply With Close Loop Feed Back And Isolation Transformer. 479 Wheatstone Bridge 480 Kelvin Bridge 481 Anderson Bridge 482 Measurement Of Unknown Capacitance By Schering Bridge 483 Measurement Of Inductance By Hays Bridge Object 484 Electrical & Electronic System Trainer Master Unit With Analog Multiplexer / Demultipelxer & Adc Dac 485 Multimeter Digital 486 100 Mhz Digital Storage Oscilloscope 487 Calibration Of 1-F Energy Meter 488 Thyristorised Phase To Phase Dc Power Supply 489 Load Banks 490 • Single Phase Resistive Load Bank -20A 491 • 3 Phase 5A Resistive Load Bank 492 • 3 Phase 5A Unbalanced Resistive Load Bank 493 • 3 Phase 5A Capacitive Load Bank 494 • 3 Phase 5A Inductive Load Bank 495 Potable Type Meters, In Eng Plastic Case, Class 1 Accuracy 496 • 0-1A Ac 497 • 0-2A Ac 498 • 0-5A Ac 499 • 0-10A Ac 500 • 0-20A Ac 501 • 0-10V Ac 502 • 0-20V Ac 503 • 0-300V Ac 504 • 0-500V Ac 505 • 0-1A Dc 506 • 0-2A Dc 507 • 0-5A Dc 508 • 0-10A Dc 509 • 0-20A Dc 510 • 0-10V Dc 511 • 0-20V Dc 512 • 0-300V Dc 513 • 0-500V Dc 514 Portable Wattmeter 515 • 5 / 10A, Pc. 150 / 300V / 600V –Upf 516 • Cc. 5 / 10 A, Pc. 150 / 300 / 600V – Lpf 517 Experimental Set Up For 1 ) No Load & Block Rotor Test On 3 Phase Induction Motor. 2 ) Direct Load Test Of 3 Phase Sqim 518 Experimental Set Up For 1 ) No Load & Block Rotor Test On 3 Phase Slipring Induction Motor. 2 ) Direct Load Test Of 3 Phase Slim 519 Experimental Set Up For 1 ) No Load & Block Rotor Test On 1 Phase Cscr Sq. Cage Induction Motor.2 ) Direct Load Test Of 1 Phase Cscr Sqim. 520 Power Semiconductor Experiment Unit 521 Power Electronics Trainer 522 Add On Experimental Panel For The Above Power Electronics Trainer 523 Power Semiconductor Application Panel 524 Power Semicondutor Application Experimental Panel 525 Con / Inv Panel 526 Dv / Dt Protection & Firing Circuit Study Panel Scr Triggering Schemes / Turn On Methods 527 Igbt / Mosfet Inverter Panel 528 Ups Trainer 529 Cathode Ray Oscilloscope: 530 Digital Multimeter 531 8085 Microprocessor Trainer Kit Tender Specification 532 8086 Microprocessor Trainer Kit Tender Specification 533 Basic Embedded Lab Consisting Of : 1. Educational Practice Board For Arm7 Lpc2148 ( 10 Units ) N2. Lcd Matrix Key Board Interfacing Kit ( 5 Units ) N3. General Purpose I / O Board ( 5 Units ) N4. All In One General Purpose Board ( 2 Units ) N5. Finger Print Sensor Interfacing Kit ( 1 Unit ) N6. Graphic Lcd Interfacing Kit ( 1 Unit ) N7. Rfid Kit ( 1 Unit ) N8. Thermal Printer Kit ( 1 Unit ) N9. Ide For Arm7 ( Lab License ) N10. Gps Module ( 1 Unit ) N11. Sensor Module ( 1 Unit ) N12. Bluetooth Module ( 1 Unit ) N13. Zigbee Module ( 1 Unit ) N14. Gsm Module ( 1 Unit ) N15. 8051 Micro Controller Kit ( 5 Unit ) N 534 Pic Microcontroller Lab 535 Dc Motor Drives In Control Rectifier 536 Chopper- Dc Motor Dives ( Open And Closed Loop Control ) 537 Chopper Fed Dc Motor Drives 538 Industrial Plc Trainer Kit 539 Conveyor Belt 540 Air Compressor Displacement 541 Electrical & Electronic System Trainer Master Unit 542 Experimental Panels Compatible To The Above Master Unit 543 Dc, Ac & Wave Shaping Circuit Experiment Panel 544 Rectifier, Filter, Zener Regulator Experiment Panel 545 Bead Board Panel Of 1680 Tie Points 546 Cathode Ray Oscilloscope: 547 Digital Multimeter 548 Analog Digital Trainer Master Unit 549 Experimental Panels Compatible To The Above Master Unit 550 Panel For Digital Ic Trainer 551 Panel For Digital Ttl Cmos Trainer 552 Digital Logic ( Basic Logic Gates ) Experiment Panel 553 Half / Full-Adder-Subtractor Experiment Panel 554 Memory Experiment Panel 555 50 Mhz 2 Channel Digital Storage Oscilloscope 556 Digital Multimeter 557 Pc Hardware Trainer Along With Accessories: 558 Lan Training System 559 Desktop Computer Along With Computer Table 560 Network And Data Security Trainer 561 Desktop Computer Along With Computer Table

INR 1000 /-

INR 800000.0 /-

INR 3.69 Crore /-

Name of Work: <Supply & Installation of Instruments / Machines on turnkey basis to be installed at Hailakandi Polytechnic,Hailakandi,Assam >
	Sl. No.	Item Description	Item Code / Make	Quantity	Units
1	1	ALL GEARED PRECISION LATHE MACHINE WITH HARDENDED GUIDEWAYS, HARDENED & PROFILE GROUND HEAD STOCK GEARS COMPLETE WITH THE FOLLOWING STANDARD ACCESSORIES:- ELECTRIC MOTOR, R/F SWITCH, ‘V’ BELTS, 2 MT, CENTRES WITH CENTRE BUSH, INCH & MM GEARS, OIL CAN, SPANNER & ALLEN KEY SET & INSTRUCTION MANUAL.ALONG WITH ACESSORIES	item2	1	Nos
2	2	HEAVY DUTY ALL GEARED SHAPING MACHINE COMPLETE WITH SWIVELBASE VICE, AUTOMATIC LUBRICATION, ELECTRICALS & GUARDS ALONGWITH ACCESSORIES	item3	1	Nos
3	3	ALL GEARED UNIVERSAL MILLING MACHINE WITH LONGITUDINAL FEED AUTOMATIC ALONGWITH ACCESSORIES	item4	1	Nos
4	4	PILLAR DRILLING MACHINE ALONGWITH ACCESSORIES	item5	1	Nos
5	5	HYDRAULIC HACKSAW MACHINE COMPLETE WITH STANDARD ACCESSORIES: ELECTRIC MOTOR, STARTER, HYDRAULIC PUMP, UNIT, MECHANICAL COOLANT PUMP WITH FITTINGS, ‘V’ BELTS, RIGHT ANGLE VICE & GAUGE STOP	item6	1	Nos
6	6	PEDESTAL GRINDING MACHINE	item7	1	Nos
7	7	Tools For Machine Shop
8	7.01	Hand drilling machine	item9	2	Nos
9	7.02	Calipers	item10	10	Nos
10	7.03	Steel rule, 12”	item11	15	Nos
11	7.04	V calipers 6”	item12	15	Nos
12	7.05	Micrometer inside	item13	2	Nos
13	7.06	Micrometer outside	item14	2	Nos
14	7.07	Digital vernier caliper	item15	2	Nos
15	7.08	Filler gauge 26 blade	item16	3	Nos
16	7.09	Combination set	item17	5	Nos
17	7.1	Reamer no.13	item18	5	Nos
18	7.11	Tap and die set	item19	2	Nos
19	7.12	Adjustable spanner, 12”	item20	5	Nos
20	8	Machine Tools
21	8.01	Wood turning lathe	item22	1	Nos
22	8.02	Surface planer machine	item23	1	Nos
23	8.03	Circular saw machine	item24	1	Nos
24	8.04	Jig saw machine	item25	1	Nos
25	8.05	Wooden grinding machine	item26	1	Nos
26	8.06	Disc sander	item27	1	Nos
27	9	Measuring Tools
28	9.01	Marking gauge, 12”	item29	10	Nos
29	9.02	Four fold rule	item30	10	Nos
30	9.03	Steel tape, 3 meter	item31	10	Nos
31	9.04	Try square, 12”	item32	10	Nos
32	9.05	Spirit level	item33	10	Nos
33	9.06	Steel rule 12”	item34	10	Nos
34	10	Cutting Tools
35	10.01	Tennon saw	item36	3	Nos
36	10.02	Firmer chisel	item37	10	Nos
37	10.03	Mortise chisel	item38	10	Nos
38	11	Planning Tools
39	11.01	Metal jack plane	item40	5	Nos
40	11.02	Drill bits 1/8” to ½ “, 10 pc set	item41	2	Nos
41	11.03	Claw hammer	item42	5	Nos
42	11.04	Mallet hammer	item43	5	Nos
43	11.05	Ball peen hammer, 800 g	item44	5	Nos
44	12	Holding tools
45	12.01	Bench vice No.4	item46	5	Nos
46	12.02	Screw driver	item47	10	Nos
47	12.03	Pincer 8”	item48	5	Nos
48	12.04	Scraper	item49	5	Nos
49	12.05	Oil stone	item50	5	Nos
50	13	CIRCULAR SAW MACHINE ALONG WITH ACCESSORIES	item51	1	Nos
51	14	Wood Working Machine ALONG WITH ACCESSORIES	item52	1	Nos
52	15	ARC WELDING MACHINE, 400 A ALONG WITH ACCESSORIES	item53	1	Nos
53	16	TIG /MMA Pulse Welding Power Source ALONG WITH ACCESSORIES	item54	1	Nos
54	17	MIG/MAG Welding M/C, (50-400 AMPS)	item55	1	Nos
55	18	WELDING MOTOR GENERATOR SET	item56	1	Nos
56	19	Spot Welding Machine	item57	1	Nos
57	20	Multiprocess Inverter Based DC Welding Machine ALONG WITH ACCESSORIES	item58	1	Nos
58	21	Gas welding set.	item59	2	Nos
59	22	Hand tools
60	22.01	Hand shield	item61	20	Nos
61	22.02	Welding Helmet	item62	20	Nos
62	22.03	Welding goggles	item63	20	Nos
63	22.04	Chipping hammer	item64	20	Nos
64	22.05	Pliers 7”	item65	20	Nos
65	22.06	Measuring tape 3 mtr	item66	5	Nos
66	22.07	Steel rule 12”	item67	20	Nos
67	22.08	Hand gloves	item68	20	Nos
68	22.09	Ball peen hammer, 800 g	item69	20	Nos
69	22.1	Cross peen hammer 800 g	item70	20	Nos
70	23	PEDESTAL GRINDING MACHINE	item71	1	Nos
71	24	Bench grinding machine	item72	2	Nos
72	25	Hand drilling machine	item73	2	Nos
73	26	Holding tools
74	26.01	Bench vice No.4	item75	5	Nos
75	26.02	Hand vice	item76	5	Nos
76	26.03	Pipe vice no.3	item77	5	Nos
77	26.04	Pin vice	item78	5	Nos
78	26.05	G clamp 6”	item79	5	Nos
79	27	Striking tools
80	27.01	Ball peen hammer, 800 g	item81	5	Nos
81	27.02	Straight peen hammer, 1Kg	item82	5	Nos
82	27.03	Cross peen hammer 800 g	item83	5	Nos
83	28	Cutting tools
84	28.01	Flat chisel	item85	5	Nos
85	28.02	Round nose chisel	item86	5	Nos
86	28.03	Solid frame hack saw	item87	5	Nos
87	28.04	Adjustable frame hacksaw	item88	5	Nos
88	28.05	10” flat Files	item89	5	Nos
89	28.06	10” square Files	item90	3	Nos
90	28.07	10” triangular Files	item91	3	Nos
91	28.08	Scraper, 8”	item92	3	Nos
92	28.09	Tap and die set ¼ to ½	item93	2	Nos
93	28.1	Drill bits 1/8” to ½ “, 10 pc set	item94	2	Nos
94	28.11	Hacksaw blade	item95	50	Nos
95	28.12	Tin cutter	item96	5	Nos
96	29	Marking/measuring tools
97	29.01	Steel rule, 12”	item98	5	Nos
98	29.02	Try square, 12”	item99	5	Nos
99	29.03	Scriber	item100	5	Nos
100	29.04	Combination set	item101	5	Nos
101	29.05	Calipers, 10”	item102	5	Nos
102	29.06	Divider 10”	item103	5	Nos
103	29.07	V block	item104	2	Nos
104	30	Rectangular Refractory Furnace (Deluxe Model);	item105	1	Nos
105	31	PERMEABILITY TESTER [ELECTRIC] ALONG WITH ACCESSORIES	item106	1	Nos
106	32	SAND SIEVER	item107	1	Nos
107	33	SAND RAMMER	item108	1	Nos
108	34	Moulding boxes
109	34.01	Aluminum Molding Box 12x12x41/2	item110	1	Nos
110	34.02	Aluminum Molding Box 16x16/41/2	item111	1	Nos
111	35	Flasks
112	35.01	MS Jacket 12x12x41/2	item113	1	Nos
113	35.02	MS Jacket 16x16x41/2	item114	1	Nos
114	36	Anvil 100 Kg (Single Horn)	item115	3	Nos
115	37	Lee Vice. Table size - 15" x 24", Jaw size - 8" x 30"	item116	1	Nos
116	38	Round tongs Length-18”	item117	5	Nos
117	39	Square tongs. Length-18”	item118	5	Nos
118	40	Flat tongs. Length-18”	item119	5	Nos
119	41	Pick-up tongs. Length-18”	item120	5	Nos
120	42	Side tongs, length-18”	item121	5	Nos
121	43	Ring tongs, length-18”	item122	5	Nos
122	44	Flatter 2 "x 2"x 3"	item123	5	Nos
123	45	Top fuller. ¼ " to l"	item124	5	Nos
124	46	Bottom fuller. ¼" to 1"	item125	5	Nos
125	47	Hammer with handle ball peen 500g. Make: Taparia	item126	5	Nos
126	48	Hammer with handle ball peen 750g Make: Taparia	item127	5	Nos
127	49	Hammer with handle ball peen l kg	item128	5	Nos
128	50	Double faced sledge hammer 3 .5kg (7 lbs)	item129	5	Nos
129	51	Hot chisel, cutting edge angle-30º length- 6' & 8"	item130	5	Nos
130	52	Cold chisel, cutting edge angle-30º length- 6' & 8"	item131	5	Nos
131	53	Swage block. 12"x 12" x 4"	item132	1	Nos
132	54	Poker 300"	item133	5	Nos
133	55	ALL IN ONE 3D PRINTER ASSEMBLY KIT WITH LASER ENGRAVING AND CNC CARVING	item134	1	Nos
134	56	3D SCANNER	item135	1	Nos
135	57	Interactive Physics Simulation Software- 5 Users License	item136	1	Nos
136	58	Young' s modulus Apparatus Searle's Pattern with Brass Frame	item137	4	Nos
137	59	Post Office Box Plug Type with maganin coil three ratio	item138	4	Nos
138	60	Resistance Box Plug,
139	60.01	0.1     to 1	item140	10	Nos
140	60.02	1 to 10 Ohm,	item141	10	Nos
141	60.03	1 to 1000 Ohm,	item142	10	Nos
142	61	Leclanche Cell:-	item143	10	Nos
143	62	Ammonium Chloride Salt	item144	4	Nos
144	63	Moment of Inertia Table :-	item145	4	Nos
145	64	OPTICAL BENCH (Metal Double Rod) complete accessories such as upright, rod stand etc.	item146	2	Nos
146	65	Vibration magnetometer	item147	4	Nos
147	66	Complete set up drawing the static characteristic curves of a semiconductor diode and hence to determine it DC and AC resistances for a given current	item148	6	Nos
148	67	Rheostat
149	67.01	Rheostat (Oxidized eureka Constantan Wire Current : 4A Range : 20 ohms)	item150	5	Nos
150	67.02	Rheostat (Oxidized eureka Constantan Wire Current : 1.8 A Range : 110 ohms)	item151	5	Nos
151	67.03	Rheostat (Oxidized eureka Constantan Wire Current : 1.8 A Range : 100 ohms)	item152	5	Nos
152	67.04	Rheostat (Oxidized eureka Constantan Wire Current : 1.6 A Range : 125 ohms)	item153	5	Nos
153	68	BARTON’S VERTICAL APPARATUS OR (TORSION APPARATUS),	item154	6	Nos
154	69	SPHEROMETER, Brass,	item155	18	Nos
155	70	VERNIER CALLIPER,	item156	18	Nos
156	71	SCREW GAUGE (Micrometer), Sand Blasted, L.C.1/100mm, 25mm,	item157	18	Nos
157	72	POTENTIOMETER	item158	10	Nos
158	73	METER BRIDGE (Wheatstone Bridge),	item159	6	Nos
159	74	STOP WATCH,	item160	18	Nos
160	75	THERMOMETER (30cm Length),	item161	12	Nos
161	76	Pencil Jockey Insulated handle knife edge brass constact and a plated terminal	item162	12	Nos
162	77	MAGNIFIER (Metal Frame), 3”,	item163	10	Nos
163	78	COPPER WIRE (DCC WIRE) DOUBLE COTTON	item164	4	Nos
164	79	GALVANOMETER, (DC with Stand) range:30-0-30 div	item165	12	Nos
165	80	VOLTMETER SQUARE Dial,	item166	12	Nos
166	81	AMMETER SQUARE,	item167	12	Nos
167	82	CONCAVE LENS (REGULAR QUALITY),	item168	12	Nos
168	83	CONVEX LENS (REGULAR QUALITY),	item169	12	Nos
169	84	Newton’s Ring Apparatus	item170	1	Nos
170	85	Intermediate Spectrometer 6" S.S.Scale,	item171	1	Nos
171	86	Spectrometer Prism,
172	86.01	32 x32 mm	item173	6	Nos
173	86.02	38 x 38 mm	item174	6	Nos
174	87	Reading Telescope College Pattern :-	item175	10	Nos
175	88	Optical Stand SS ROD (600mm) with base clamp for holding optical needle	item176	6	Nos
176	89	BAR PENDULUM COMPOUND,	item177	6	Nos
177	90	Joule's calorimeter (3"x2")	item178	6	Nos
178	91	Newton’s Law of cooling Apparatus:-	item179	6	Nos
179	92	Ramsden Eyepiece 10x with Holder,	item180	6	Nos
180	93	COMMUTATOR, BRASS (FOUR WAY PLUG KEY),	item181	10	Nos
181	94	MEASURING CYLINDERS PLASTIC,	item182	10	Nos
182	95	Desktop Computer	item183	5	Nos
183	96	Mono Network Laser Printer	item184	1	Nos
184	97	Electronic Balance Capacity: 600 gm	item185	3	Nos
185	98	Physical Balance with Weight Box Capacity: 250 gm\nResolution: 0.2 mg	item186	5	Nos
186	99	Distilled Water Plant	item187	1	Nos
187	100	Hot Air Oven	item188	1	Nos
188	101	Water Bath,Thermostatic rectangular water bath with 12 holes	item189	1	Nos
189	102	Rotary Shaker	item190	1	Nos
190	103	pH Meter	item191	3	Nos
191	104	Digital Conductivity Meter with probe	item192	2	Nos
192	105	Magnetic stirrer	item193	5	Nos
193	106	Heating Mantle
194	106.01	100ml	item195	2	Nos
195	106.02	250ml	item196	2	Nos
196	106.03	500ml	item197	2	Nos
197	107	Magnetic stirrer with hot plate	item198	2	Nos
198	108	MUFFLE FURNACE RECTANGULAR (Laboratory Model), Dimension(WxHxD): 100x100x300	item199	1	Nos
199	109	Digital Nephelo Meter	item200	1	Nos
200	110	UV- Visible spectrophotometer	item201	1	Nos
201	111	Thermometer	item202	10	Nos
202	112	Model Chem Lab – 10 Users License	item203	1	Nos
203	113	Digital Potentiometer	item204	2	Nos
204	114	Dektop PC - Intel Core i3 Processor, 500 GB HDD, 4 GB DDR RAM, 18.5"TFT	item205	5	Nos
205	115	Volumetric Flask(100mL) measuring with plastic stopper	item206	20	Nos
206	116	Volumetric Flask(250mL) measuring with plastic stopper	item207	20	Nos
207	117	Wire Gauze	item208	40	Nos
208	118	Connical flask -250 ml	item209	50	Nos
209	119	Connical flask -500 ml	item210	30	Nos
210	120	Beaker ( 100ml)	item211	40	Nos
211	121	Beaker ( 250ml)	item212	40	Nos
212	122	Beaker (500ml)	item213	20	Nos
213	123	Beaker (1000 ml)	item214	10	Nos
214	124	Pipette ( 10 ml)	item215	20	Nos
215	125	Pipette ( 20 ml)	item216	20	Nos
216	126	Pipette ( 25 ml)	item217	40	Nos
217	127	Pipette stand, capacity : 28no’s x 28ml	item218	20	Nos
218	128	Pyknometer (specific gravity bottle ) with thermometer 25ml	item219	10	Nos
219	129	Pyknometer (specific gravity bottle ) with thermometer 10ml	item220	20	Nos
220	130	Reagent bottle 250ml	item221	30	Nos
221	131	Reagent bottle 500ml	item222	20	Nos
222	132	Reagent bottle 1000ml	item223	7	Nos
223	133	Reagent bottle 2000ml	item224	3	Nos
224	134	Burette (50 ml) screw type rota flow stopcock with PTFE (Teflon key)	item225	20	Nos
225	135	Burette Stand with clamp	item226	10	Nos
226	136	Test Tube	item227	200	Nos
227	137	Test Tube holder	item228	40	Nos
228	138	Weighing bottle 20 ml	item229	20	Nos
229	139	Test Tube Stand. Capacity 20 no’s of test tubes	item230	15	Nos
230	140	Measuring Cylinder (25mL)	item231	10	Nos
231	141	Measuring Cylinder (50mL)	item232	10	Nos
232	142	Measuring Cylinder (100ml)	item233	5	Nos
233	143	Measuring Cylinder (250ml)	item234	5	Nos
234	144	Measuring Cylinder (500ml)	item235	3	Nos
235	145	Measuring Cylinder (1000ml)	item236	3	Nos
236	146	Funnel, diameter 100mm	item237	40	Nos
237	147	Bunsen Burner for L.P.G Connection	item238	30	Nos
238	148	Silica crucible with lid 25ml.	item239	15	Nos
239	149	Tong 6”	item240	30	Nos
240	150	Dropper with rubber teat	item241	30	Nos
241	151	Tripod Stand	item242	35	Nos
242	152	Stirring Rod	item243	40	Nos
243	153	LPG GAS cylinder	item244	3	Nos
244	154	DESKTOP COMPUTER ALONG WITH COMPUTER TABLE	item245	30	Nos
245	155	10 KVA On-Line UPS Systems with inbuilt Isolation Transformer with 30 Minutes Battery back-up time using SMF Batteries, Rack & interlinks	item246	1	Nos
246	156	Mono Network Laser Printer	item247	5	Nos
247	157	Color Laser Printer	item248	1	Nos
248	158	Multimedia Projector with Screen 4×6 tripod stand	item249	1	Nos
249	159	Calibration of Miliammeter as Voltmeter	item250	1	Nos
250	160	Calibration of Milivoltmeter as Ammeter	item251	1	Nos
251	161	Characteristics of Filament Lamp	item252	1	Nos
252	162	Ohmic and Effective Resistance Measurement	item253	1	Nos
253	163	Electrical & Electronic System Trainer along with DC, AC & Wave Shaping Circuit Experiment Panel	item254	2	Nos
254	164	Study of star & Delta balance load	item255	1	Nos
255	165	Measurement of Power by Wattmeter.	item256	1	Nos
256	166	Half wave/ Full wave rectifier circuit	item257	1	Nos
257	167	Electrical & Electronic System Trainer along Semiconductor & Power semiconductor devices experiment panel	item258	1	Nos
258	168	Wiring using switch, Fuse, Indicator, Lamps and Energy meter.	item259	1	Nos
259	169	30 MHz CATHODE RAY OSCILLOSCOPE	item260	1	Nos
260	170	Digital Multimeter	item261	5	Nos
261	171	Digital Clamp Meter	item262	1	Nos
262	172	Model of Triangle & Parallelogram of Forces Apparatus \nSlotted Weight Set : Iron Nickelled: 4 Weight & 1 Hanger (500 Gms)	item263	2	Nos
263	173	Model of Polygon & Triangle of Forces Apparatus \nSlotted Weight Set : Iron Nickelled: 4 Weight & 1 Hanger (500 Gms)	item264	2	Nos
264	174	Apparatus to Study Equilibrium of Non Concurrent Forces \nSlotted Weight Set : Iron Nickelled: 4 Weight & 1 Hanger (500 Gms)	item265	2	Nos
265	175	Model of Moments Disc Apparatus (with Weights) With Physical Weight Set 500 Gm & 250 Gm – Each)	item266	2	Nos
266	176	Model of Friction Slide Apparatus Superior Quality with Weights, Physical Weight Box (500gms)	item267	2	Nos
267	177	Model of Inclined Plane( Normal Quality )(with Weights), Physical Weight Box (500gms)	item268	1	Nos
268	178	Screw Jack Small Size	item269	1	Nos
269	179	Model of Simple Pendulum	item270	1	Nos
270	180	Model of Bar Pendulum or Compound Pendulum	item271	1	Nos
271	181	Model of Moment of Inertia of Flywheel (Dia- 15 cm) With Weight: 2 Kg(Conical)	item272	1	Nos
272	182	Model of Apparatus to find Center of Gravity	item273	2	Nos
273	183	Model of Centrifugal Force Apparatus	item274	2	Nos
274	184	Slotted Weight Set: Iron Nickelled: 4 Weight & 1 Hanger
275	184.01	A.      20 Gms	item276	1	Nos
276	184.02	B.       50 Gms	item277	1	Nos
277	184.03	C.       100 Gms	item278	1	Nos
278	184.04	D.      200 Gms	item279	1	Nos
279	185	Apparatus for Reaction of Forces in Beam 20 Kg Balance,	item280	1	Nos
280	186	Model of Bell Crank Lever with Weights,	item281	1	Nos
281	187	Model of Compound Lever	item282	1	Nos
282	188	Model of Jib Crane with Iron Base & Tubular Type Compression Balance & Slotted Weights,	item283	1	Nos
283	189	Model of Rope Brake & Dynamometer	item284	1	Nos
284	190	Universal Force Table (Superior)	item285	1	Nos
285	191	Young Modulus of a Metal Rod by an Interference Method	item286	1	Nos
286	192	Prismatic compass 4”dia in fiber case with telescopic aluminum stand in case	item287	5	Nos
287	193	Ranging rod telescopic in case
288	193.01	2 metre	item289	10	Nos
289	193.02	3 metre	item290	10	Nos
290	194	Measuring tapes
291	194.01	cloth in case 30 meter	item292	10	Nos
292	194.02	Steel 30 meter,	item293	10	Nos
293	195	Planimeter in wooden box with calibration chart	item294	10	Nos
294	196	Digital Planimeter ALONG WITH ACCESSORIES	item295	3	Nos
295	197	Chains
296	197.01	Metric chain	item297	5	Nos
297	197.02	Guntess/Surveyors chain	item298	5	Nos
298	197.03	Engineers chain	item299	5	Nos
299	197.04	Reverse chain	item300	5	Nos
300	198	Leveling Staff	item301	10	Nos
301	199	Dumpy level 12”IF in wooden box with telescopic aluminum stand in case	item302	10	Nos
302	200	Automatic Level ALONG WITH ACCESSORIES	item303	5	Nos
303	201	Plane table fitted with non magnetic metel plate with wooden stand	item304	5	Nos
304	202	Alidade in wooden box 18”	item305	10	Nos
305	203	Accessories: plumb bob, U-fork, magnet, treble tube	item306	10	Nos
306	204	Transit venires theodolite 20 sec accuracy in wooden box with accessories and telescopic aluminum stand with manual	item307	5	Nos
307	205	ELECTRONIC THEODOLITE ALONG WITH ACCESSORIES	item308	1	Nos
308	206	ELECTRONIC TOTAL STATION ALONG WITH ACCESSORIES	item309	1	Nos
309	207	Pycnometer	item310	5	Nos
310	208	Density Bottle	item311	15	Nos
311	209	Sieve Shaker – Motorised	item312	1	Nos
312	210	Standard Test Sieves Technical Specification:
313	210.01	200 mm dia, Spun Brass Frames Size 4.75mm,	item314	1	Nos
314	210.02	200 mm dia, Spun Brass Frames Size 2.36mm,	item315	1	Nos
315	210.03	200 mm dia, Spun Brass Frames Size 2.00mm,	item316	1	Nos
316	210.04	200 mm dia, Spun Brass Frames Size 1.18mm,	item317	1	Nos
317	210.05	200 mm dia, Spun Brass Frames Size 600 micron,	item318	1	Nos
318	210.06	200 mm dia, Spun Brass Frames Size 425 micron,	item319	1	Nos
319	210.07	200 mm dia, Spun Brass Frames Size 300mic,	item320	1	Nos
320	210.08	200 mm dia, Spun Brass Frames Size 150mic,	item321	1	Nos
321	210.09	200 mm dia, Spun Brass Frames Size 75mic	item322	1	Nos
322	210.1	200 mm dia, Spun Brass Frames Size lid & pan	item323	1	Nos
323	210.11	300 mm dia, Spun Brass Frames Size 9.50mm	item324	1	Nos
324	210.12	300 mm dia, Spun Brass Frames Size 4.75mm,	item325	1	Nos
325	210.13	300 mm dia, Spun Brass Frames Size 2.36mm,	item326	1	Nos
326	210.14	300 mm dia, Spun Brass Frames Size 2.00mm,	item327	1	Nos
327	210.15	300 mm dia, Spun Brass Frames Size 1.18mm,	item328	1	Nos
328	210.16	300 mm dia, Spun Brass Frames Size 600 micron,	item329	1	Nos
329	210.17	300 mm dia, Spun Brass Frames Size 425 micron,	item330	1	Nos
330	210.18	300 mm dia, Spun Brass Frames Size 300mic,	item331	1	Nos
331	210.19	300 mm dia, Spun Brass Frames Size 150mic,	item332	1	Nos
332	210.2	300 mm dia, Spun Brass Frames Size 75mic	item333	1	Nos
333	210.21	300 mm dia, Spun Brass Frames Size lid & pan	item334	1	Nos
334	211	Water Still 4 litre/hour	item335	1	Nos
335	212	Liquid Limit Device, Hand operated with counter	item336	1	Nos
336	213	Hydraulic Extruder (Motorised)	item337	1	Nos
337	214	Plastic Limit Apparatus conforming to IS:2720 (Part V)	item338	1	Nos
338	215	Shrinkage Limit Apparatus, conforming to IS:10077, IS:2720 (Part VI)	item339	1	Nos
339	216	Glass Thermometer 0-150 °C	item340	1	Nos
340	217	Electronic Balance 6 kg. Capacity with Accuracy 0.5 gm.	item341	1	Nos
341	218	Spatula
342	218.01	Spatula 150 mm blade with wooden handle	item343	1	Nos
343	218.02	Spatula 290 mm blade with wooden handle	item344	1	Nos
344	219	Sand Pouring Cylinder, (Large) ALONG WITH ACCESSORIES	item345	1	Nos
345	220	Core Cutter	item346	1	Nos
346	221	Universal Triaxial Cell	item347	1	Nos
347	222	COMPRESSION TESTING MACHINE	item348	1	Nos
348	223	Direct Shear Apparatus (Motorized)	item349	1	Nos
349	224	Universal Permeameter IS:2720 (Part-17),IS 11209	item350	1	Nos
350	225	Variable Flow Type Air Permeability	item351	1	Nos
351	226	Cement Autoclave IS : 4031-1968 ALONG WITH ACCESSORIES	item352	1	Nos
352	227	Aggregate Impact Test Apparatus with counter	item353	1	Nos
353	228	Density Basket	item354	5	Nos
354	229	Vicat Apparatus, With Dashpot	item355	5	Nos
355	230	Gauging Trowel BS:12, IS:4031, IS : 10086-1982	item356	20	Nos
356	231	Trowel IS:4031 - 1968, IS : 10086-1982	item357	20	Nos
357	232	Steel Bowl (Medium)	item358	20	Nos
358	233	Plastic Tray Medium Size	item359	10	Nos
359	234	Plastic Measuring Jar 10 ml.	item360	10	Nos
360	235	Plastic Measuring Jar 25 ml.	item361	10	Nos
361	236	Plastic Measuring Jar 50 ml.	item362	10	Nos
362	237	Plastic Measuring Jar 100 ml.	item363	10	Nos
363	238	Plastic Measuring Jar 1000 ml.	item364	10	Nos
364	239	Density Bottle	item365	10	Nos
365	240	Le-Chatelier Flask 1000 ml.	item366	5	Nos
366	241	Le Chatelier Mould, conforming IS : 5514-1969	item367	10	Nos
367	241.01	Le Chatelier Water Bath.	item368	1	Nos
368	242	Hot Plate	item369	1	Nos
369	243	Steel Vessel 250 mm dia.	item370	10	Nos
370	244	Cube Mould	item371	30	Nos
371	245	Sieves 200 mm dia (8” dia) Spun Brass frame Sieve Sizes :
372	245.01	4.75 mm,	item373	5	Nos
373	245.02	2.36 mm,	item374	5	Nos
374	245.03	1.18 mm,	item375	5	Nos
375	245.04	600 Mic,	item376	5	Nos
376	245.05	300 Mic,	item377	5	Nos
377	245.06	150 Mic,	item378	5	Nos
378	245.07	75 Mic,	item379	5	Nos
379	245.08	lid and pan.	item380	5	Nos
380	246	Sieves 200 mm dia (8” dia) Spun Brass frame Sieve	item381	3	Nos
381	247	Compaction Factor Apparatus	item382	1	Nos
382	248	Cube Mould (150 mm)	item383	3	Nos
383	249	Cube Mould (100 mm) Non ISI Mark	item384	4	Nos
384	250	Cylindrical Mould 150 mm dia x 300 mm high, Cast Iron.	item385	4	Nos
385	251	Beam Mould 150 mm x 150 mm x 700 mm made of Cast Iron.	item386	2	Nos
386	252	Beam Mould 100 mm x 100 mm x 500 mm made of Cast Iron.	item387	2	Nos
387	253	Moisture Cup Medium size	item388	30	Nos
388	254	Sieve Shaker – Motorised 300mm dia adopter for the above Sieve Shaker Timer for above Sieve Shaker	item389	1	Nos
389	255	Ultrasonic Thickness Gage	item390	1	Nos
390	256	Laboratory California Bearing Ratio Test Apparatus,	item391	1	Nos
391	257	Mild Steel, Zinc Plated Mould, 150mm ID x 175mm	item392	1	Nos
392	258	Mild Steel, Zinc Plated Perforated Base Plate for MS Mould	item393	1	Nos
393	259	Mild Steel Zinc Plated Extension Collar 150mm ID x 50mm high	item394	1	Nos
394	260	Sand Pouring Cylinder Apparatus, 100mm Dia. Ref. Standard IS:2720 (Part 28)	item395	1	Nos
395	261	Sand Pouring Cylinder Apparatus,	item396	1	Nos
396	262	Sieve Shaker	item397	1	Nos
397	263	Sieve G.I. Frame 45cm dia x 125mm	item398	1	Nos
398	264	(i) Sieve G.I. Frame 45cm dia x 106mm	item399	1	Nos
399	264.01	(ii) Sieve G.I. Frame 45cm dia x 100mm	item400	1	Nos
400	264.02	(iii)Sieve G.I. Frame 45cm dia x 90mm	item401	1	Nos
401	264.03	(iv)Sieve G.I. Frame 45cm dia x 80mm	item402	1	Nos
402	264.04	(v) Sieve G.I. Frame 45cm dia x 75mm	item403	1	Nos
403	264.05	(vi)Sieve G.I. Frame 45cm dia x 63mm	item404	1	Nos
404	264.06	(vii) Sieve G.I. Frame 45cm dia x 53mm	item405	1	Nos
405	264.07	(viii) Sieve G.I. Frame 45cm dia x 50mm	item406	1	Nos
406	264.08	(ix)Sieve G.I. Frame 45cm dia x 45mm	item407	1	Nos
407	264.09	(x) Sieve G.I. Frame 45cm dia x 40mm	item408	1	Nos
408	264.1	(xi)Sieve G.I. Frame 45cm dia x 37.5mm	item409	1	Nos
409	264.11	(xii) Sieve G.I. Frame 45cm dia x 31.5mm	item410	1	Nos
410	264.12	(xiii) Sieve G.I. Frame 45cm dia x 26.5mm	item411	1	Nos
411	264.13	(xiv) Sieve G.I. Frame 45cm dia x 25mm	item412	1	Nos
412	264.14	(xv) Sieve G.I. Frame 45cm dia x 22.4mm	item413	1	Nos
413	265	Los Angeles Abrasion Testing Machine	item414	1	Nos
414	266	Aggregate Impact Tester for determining the aggregate impact value	item415	1	Nos
415	267	Compaction Test Apparatus Manual -Light Compaction made of Mild Steel Compaction Test Apparatus Manual-Heavy Compaction made of Mild Steel	item416	1	Nos
416	268	Universal Penetrometer	item417	1	Nos
417	269	Ductility Testing Machine with Digital Temp Indicator	item418	1	Nos
418	270	Flash Point (Closed) Pensky-Martens Apparatus	item419	1	Nos
419	271	Thermometer
420	271.01	(i) Thermometer IP 15C Range 5°C to +110°C	item421	1	Nos
421	271.02	(ii) Thermometer IP 16C Range 90°C to +370°C	item422	1	Nos
422	271.03	(iii)Thermometer IP 8C, Range 0°C to 45°C	item423	1	Nos
423	271.04	(iv)Thermometer IP 9C, Range 40°C to 85°C	item424	1	Nos
424	271.05	(v) Thermometer IP 10C, Range 76°C to 122°C	item425	1	Nos
425	272	Standard Tar Viscometer	item426	1	Nos
426	273	Brinell cum Rockwell Hardness Tester, Rockwell Scales - A, B, C	item427	1	Nos
427	274	Electronic Universal Testing Machine with std. Accessories, Capacity: 600KN,Along with Computer , UPS & Printer ALONG WITH ACCESSORIES	item428	1	Nos
428	275	Impact Testing Machine	item429	1	Nos
429	276	HYDRAULIC BENCH	item430	2	Nos
430	277	IMPACT OF JET	item431	1	Nos
431	278	METHODS OF FLOW MEASUREMENT	item432	1	Nos
432	279	LOSSES DUE TO FRICTION IN PIPE LINES	item433	1	Nos
433	280	LOSSES DUE TO PIPE FITTINGS, SUDDEN ENLARGEMENT AND CONTRACTION	item434	1	Nos
434	281	BERNOULLI’S THEOREM	item435	1	Nos
435	282	REYNOLDS APPARATUS	item436	1	Nos
436	283	DISCHARGE OVER NOTCHES	item437	1	Nos
437	284	EXPERIMENTAL FLUME	item438	1	Nos
438	285	BENDING MOMENT IN A BEAM	item439	1	Nos
439	286	SHEAR FORCE IN A BEAM	item440	1	Nos
440	287	Parabolic Arch analysis apparatus (Two pinned and fixed arch apparatus)	item441	1	Nos
441	288	Euler Buckling of struts.	item442	1	Nos
442	289	Three pinned arch	item443	1	Nos
443	290	TWO PINNED ARCH APPARATUS	item444	1	Nos
444	291	Plastic bending of beams	item445	1	Nos
445	292	Tools sets Testers-30\nScrew Driver Sets-30\nPliers-30\nWire cutter-30\nHand Drill-3\nDrill Bits- 10 sets\nSoldering stations- 3 Nos\nVarious cutting tools\n	item446	1	Nos
446	293	Consumables Wires- different types and sizes\nPVC Pipes\nScrews and Gutkas\nLamps\nHolders\nFluorescent lamps\nSwitches –different types\nRegulators\nFuses\nIndicators\nBoards \nMCBs\nBus Bar etc\n	item447	1	Nos
447	294	Meters Multimeter-10 Nos\nInsulation Tester-2 Nos\nTong Tester- 2 Nos\nAmmeters-10 Nos\nVoltmeters -10 Nos\n	item448	1	Nos
448	295	Electrical & Electronic System Trainer master unit	item449	10	Nos
449	296	Experimental panels compatible to the above Electrical and Electronics System Trainer
450	296.01	Magnetism, Electromagnetism and Transformer Experiment Panel	item451	5	Nos
451	296.02	DC, AC & Wave Shaping Circuit Experiment Panel	item452	5	Nos
452	296.03	Bead Board Panel of 1680 tie points	item453	10	Nos
453	297	Cathode Ray Oscilloscope:	item454	5	Nos
454	298	Digital Multimeter	item455	10	Nos
455	299	Electrical & Electronic System Trainer master unit	item456	6	Nos
456	300	Experimental panels compatible to the above master unit
457	300.01	Semiconductor & Power semiconductor devices experiment panel	item458	1	Nos
458	300.02	Transistor experiment panel for H parameters, Thermal statility, CB/CC/CE	item459	1	Nos
459	300.03	Discrete component Panel (DCP)	item460	1	Nos
460	300.04	Bead Board Panel of 1680 tie points	item461	5	Nos
461	300.05	Rectifier, Filter, Zener Regulator Experiment Panel	item462	1	Nos
462	300.06	DC, AC & Wave Shaping Circuit Experiment Panel	item463	1	Nos
463	301	Analog Digital Trainer	item464	5	Nos
464	302	Experimental panels compatible to the above analog digital trainer
465	302.01	Panel for Digital IC Trainer	item466	1	Nos
466	302.02	Digital logic (Basic logic gates) Experiment Panel.	item467	1	Nos
467	302.03	Flip-flop and counters Experiment Panel	item468	1	Nos
468	302.04	Half/Full-Adder-Subtractor Experiment Panel	item469	1	Nos
469	302.05	Multivibrator & Oscillator Experiment Panel	item470	1	Nos
470	303	Cathode Ray Oscilloscope:	item471	5	Nos
471	304	Digital Multimeter	item472	5	Nos
472	305	EXPERIMENTAL SET UP FOR 1 ) OCC of Dc Shunt Generator 2 ) Load Test of DC Shunt Generator	item473	1	Nos
473	306	EXPERIMENTAL SET UP FOR 1 ) Brake Test on DC Shunt Motor. 2 ) Separation of Losses in DC Shunt Motor	item474	1	Nos
474	307	EXPERIMENTAL SET UP FOR Brake Test on DC Series Motor ALONG WITH ACCESSORIES.	item475	1	Nos
475	308	EXPERIMENTAL SET UP FOR : 1 ) Swinburne’s Test 2 ) No Load & speed control of DC Shunt Motor	item476	1	Nos
476	309	EXPERIMENTAL SET UP FOR Hopkinson’s Test on DC Shunt Machines ALONG WITH ACCESSORIES.	item477	1	Nos
477	310	EXPERIMENTAL SET UP FOR Retardation Test on DC Shunt Motor ALONG WITH ACCESSORIES.	item478	1	Nos
478	311	DC Thyristor Controlled Regulated Power Supply with close loop feed back and Isolation Transformer.	item479	1	Nos
479	312	WHEATSTONE BRIDGE	item480	1	Nos
480	313	KELVIN BRIDGE	item481	1	Nos
481	314	ANDERSON BRIDGE	item482	1	Nos
482	315	Measurement of unknown capacitance by Schering Bridge	item483	1	Nos
483	316	MEASUREMENT OF INDUCTANCE BY HAY'S BRIDGE OBJECT	item484	1	Nos
484	317	Electrical & Electronic System Trainer Master Unit With Analog Multiplexer / Demultipelxer & ADC DAC	item485	1	Nos
485	318	Multimeter Digital	item486	1	Nos
486	319	100 MHz Digital Storage Oscilloscope	item487	1	Nos
487	320	Calibration of 1-F Energy Meter	item488	1	Nos
488	321	Thyristorised phase to phase DC Power Supply	item489	1	Nos
489	322	Load Banks
490	322.01	·         Single phase resistive load bank -20A	item491	1	Nos
491	322.02	·         3 phase 5A resistive load bank	item492	1	Nos
492	322.03	·         3 phase 5A unbalanced resistive load bank	item493	1	Nos
493	322.04	·         3 phase 5A Capacitive load bank	item494	1	Nos
494	322.05	·         3 phase 5A Inductive load bank	item495	1	Nos
495	323	POTABLE TYPE METERS, IN ENG PLASTIC CASE, CLASS 1 ACCURACY
496	323.01	·         0-1A AC	item497	1	Nos
497	323.02	·         0-2A AC	item498	1	Nos
498	323.03	·         0-5A AC	item499	1	Nos
499	323.04	·         0-10A AC	item500	1	Nos
500	323.05	·         0-20A AC	item501	1	Nos
501	323.06	·         0-10V AC	item502	1	Nos
502	323.07	·         0-20V AC	item503	1	Nos
503	323.08	·         0-300V AC	item504	1	Nos
504	323.09	·         0-500V AC	item505	1	Nos
505	323.1	·         0-1A DC	item506	1	Nos
506	323.11	·         0-2A DC	item507	1	Nos
507	323.12	·         0-5A DC	item508	1	Nos
508	323.13	·         0-10A DC	item509	1	Nos
509	323.14	·         0-20A DC	item510	1	Nos
510	323.15	·         0-10V DC	item511	1	Nos
511	323.16	·         0-20V DC	item512	1	Nos
512	323.17	·         0-300V DC	item513	1	Nos
513	323.18	·         0-500V DC	item514	1	Nos
514	324	Portable wattmeter
515	324.01	·         5/10A, PC. 150/300V/600V –UPF	item516	1	Nos
516	324.02	·         CC. 5/10 A, PC. 150/300/600V – LPF	item517	1	Nos
517	325	EXPERIMENTAL SET UP FOR 1 ) No Load & Block Rotor test on 3 Phase Induction Motor. 2 ) Direct Load test of 3 Phase SQIM	item518	1	Nos
518	326	EXPERIMENTAL SET UP FOR 1 ) No Load & Block Rotor test on 3 Phase Slipring Induction Motor. 2 ) Direct Load test of 3 Phase SLIM	item519	1	Nos
519	327	EXPERIMENTAL SET UP FOR 1 ) No Load & Block Rotor test on 1 Phase CSCR Sq. Cage Induction Motor.2 ) Direct Load test of 1 Phase CSCR SQIM.	item520	1	Nos
520	328	Power Semiconductor experiment unit	item521	1	Nos
521	329	Power Electronics Trainer	item522	1	Nos
522	330	Add on experimental panel for the above Power Electronics trainer
523	330.01	Power Semiconductor Application Panel	item524	1	Nos
524	330.02	Power Semicondutor Application Experimental Panel	item525	1	Nos
525	330.03	CON / INV Panel	item526	1	Nos
526	330.04	dv/dt protection & Firing circuit study panel SCR Triggering Schemes / turn ON methods	item527	1	Nos
527	330.05	IGBT / MOSFET Inverter Panel	item528	1	Nos
528	331	UPS Trainer	item529	1	Nos
529	332	Cathode Ray Oscilloscope:	item530	1	Nos
530	333	Digital Multimeter	item531	1	Nos
531	334	8085 Microprocessor Trainer Kit Tender Specification	item532	10	Nos
532	335	8086 Microprocessor Trainer Kit Tender Specification	item533	1	Nos
533	336	Basic Embedded Lab consisting of : 1. Educational Practice Board for ARM7 LPC2148 (10 Units)\n2. LCD Matrix Key Board Interfacing Kit (5 Units)\n3. General Purpose I/O Board (5 Units)\n4. All in one General purpose board (2 Units)\n5. Finger print sensor interfacing kit (1 Unit)\n6. Graphic LCD interfacing kit (1 Unit)\n7. RFID kit (1 Unit)\n8. Thermal Printer Kit (1 Unit)\n9. IDE for ARM7 (Lab License) \n10. GPS Module (1 Unit)\n11. Sensor Module (1 Unit)\n12. Bluetooth Module (1 Unit)\n13. Zigbee Module (1 Unit)\n14. GSM Module (1 Unit)\n15. 8051 Micro controller Kit (5 Unit)\n	item534	1	Nos
534	337	PIC Microcontroller Lab	item535	1	Nos
535	338	DC Motor drives in control rectifier	item536	1	Nos
536	339	Chopper- DC motor dives (Open and closed loop control)	item537	1	Nos
537	340	Chopper fed DC motor drives	item538	1	Nos
538	341	INDUSTRIAL PLC TRAINER KIT	item539	1	Nos
539	342	Conveyor Belt	item540	1	Nos
540	343	Air compressor Displacement	item541	1	Nos
541	344	Electrical & Electronic System Trainer master unit	item542	6	Nos
542	345	Experimental panels compatible to the above master unit
543	345.01	DC, AC & Wave Shaping Circuit Experiment Panel	item544	3	Nos
544	345.02	Rectifier, Filter, Zener Regulator Experiment Panel	item545	3	Nos
545	345.03	Bead Board Panel of 1680 tie points	item546	6	Nos
546	346	Cathode Ray Oscilloscope:	item547	6	Nos
547	347	Digital Multimeter	item548	6	Nos
548	348	Analog Digital Trainer Master Unit	item549	10	Nos
549	349	Experimental panels compatible to the above master unit
550	349.01	Panel for Digital IC Trainer	item551	2	Nos
551	349.02	Panel for Digital TTL CMOS Trainer	item552	2	Nos
552	349.03	Digital logic (Basic logic gates) Experiment Panel	item553	2	Nos
553	349.04	Half/Full-Adder-Subtractor Experiment Panel	item554	2	Nos
554	349.05	Memory Experiment Panel	item555	2	Nos
555	350	50 MHz 2 channel Digital Storage Oscilloscope	item556	5	Nos
556	351	Digital Multimeter	item557	5	Nos
557	352	PC Hardware Trainer ALONG WITH ACCESSORIES:	item558	3	Nos
558	353	LAN Training System	item559	2	Nos
559	354	DESKTOP COMPUTER ALONG WITH COMPUTER TABLE	item560	5	Nos
560	355	NETWORK AND DATA SECURITY TRAINER	item561	1	Nos
561	356	DESKTOP COMPUTER ALONG WITH COMPUTER TABLE	item562	10	Nos