Providing And Laying Annual Surfacing ( Periodic Maintenance ) On Panyali To Taperh Road In Km 9/0 To 10/0 ( During The Year 2020-21 ) Of Rural Roads In The State Of Hp Providing And Laying Tack Coat , Bituminous Concrete , Thermoplastic Paint And
Tender Value
9.89 Lakhs
Estimated cost
Bid Submission
15 Feb 2020
0 days left
EMD
19800
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhawarna → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing And Laying Annual Surfacing ( Periodic Maintenance ) On Panyali To Taperh Road In Km 9 / 0 To 10 / 0 ( During The Year 2020-21 ) Of Rural Roads In The State Of Hp Providing And Laying Tack Coat , Bituminous Concrete , Thermoplastic Paint And C / O V-Shape Drain In Between Km 9 / 0 To 10 / 0
BOQ
| Name of work:- Providing and laying Annual Surfacing (Periodic Maintenance) on Panyali to Taperh road in Km 9/0 to 10/0 (during the year 2020-21) of Rural roads in the state of HP (SW:- Providing and laying Tack coat, Bituminous Concrete, Thermoplastic Paint and C/o V-shape drain in between Km 9/0 to 10/0). | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation for foundation of structure such as retaining walls, breast walls, culverts, drains and parapets etcetra in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling /wedging out rocks ( Where blasting is prohibited) as per drawings and M.O.R.D. technical specification section 300 and 1600 as per direction of the Engineer-in-Charge including setting out, shoring and bracing , removal of stumps and other deleterious materials and disposal of materials upto any lead and upto any lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm ( one hundred fifty millimeter) compacted thickness of each layers including shoring and strutting and pumping and bailing out water (surface and sub soil water ) upto any depth and any quantum of water including cleaning of slush which may arrise out during dewatering as per entire the satisfaction and the direction of Engineer-in-Charge. Including carriage of materials within all leads, lifts and other incidental. The rate is including octrai, royality, Malkana. toll tax, sale tax, GST or other taxes imposed by the Government. | 16.6 | Per cubic metre | |
| 2 | 2 | Providing and laying mechanically mixed and vibrated concrete for plain/reinforced concrete in open foundations for all types of structure complete of plain cement concrete nominal mix 1:3:6 (one cement :Three sand :Six graded crushed /broken stone aggregate 20 mm (Twenty Millimeters) nominal size on ground or under water including curing complete, pumping or bailing out water ,dewatering removal of slush as required at site which may arise at the time of laying concrete complete for all heights/depths including the cost of form work in drain as per drawings and MORD technical specifications section 800, 900 and 1200 and as per the direction of Engineer-in-Charge including carriage of material within all leads and lifts and other incidentals. The rate is including octrai, royality, Malkana. toll tax, sale tax, GST or other taxes imposed by the Government. | 15.48 | Per cubic metre | |
| 3 | 3 | Providing, laying, spreading and compacting of stone aggregate of specific sizes to water bound Macadam specification including spreading in uniform thickness hand packing, rolling with three wheel 80-100 K.N. static Road roller in stages to proper grade and camber, applying and brooming, stone screening at the rate of 0.20 cum ( zero point two zero cubic meters) per ten square meters and binding material at the rate of 0.06 cubic metre per ten square metre to fill up the interstices of coarse aggregate, watering and compacting to the required density grading –II, 63mm to 45mm ( sixty three millimeters to forty five millimeters)size, 75mm ( seventy five millimeter) compacted thickness as per M.O.R.D. technical specifications clause 405 including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads and lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | 10 | Per cubic metre | |
| 4 | 4 | Providing and applying tack coat with Bitumen Emulsion (RS-1) using emulsion pressure distributor at the rate of 0.225 Kg. ( Zero decimal two two five kilogram) per ten Square metres on the prepared bituminous surface treated with primer and cleaned with Hydraulic broom as per technical specification clause 503, as per directions of Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate is including octrai, royality, Malkana. toll tax, sale tax, GST or other taxes imposed by the Government. | 3517.5 | Per square metre | |
| 5 | 5 | Providing and laying 30mm (thirty millimetre) compacted thick Bituminous Concrete with crushed stone aggregate of grading -II (Two), 13.2 (Thirteen point two) millimetre nominal size, using bitumen VG-10 (VG-Ten) minimum 5.5% (Five point five percent) of weight of mix and filler on thoroughly cleaned surface by mechanical broom and dust removed by compressed air, mixed in computerised batch mix/HMP of 80-100 (Eighty to hundred) TPH capacity calibrated from time to time, mixing the bituminous concrete, transporting the mix material in clean insulated vehicles covered while in transit or awaiting, tipping and laying with hydrostatic paver finisher with sensor control to the required level alignment and grade, rolling with smooth wheeled, vibratory and tandem power road roller to achieve the desired compaction as per MORT&H specification clause 507( 5th revision) complete , within all leads and lifts including carriage of materials, plants and equipments by mechanical transport, as per the direction of Engineer-in- Charge. The rate is including octrai, royality, Malkana. toll tax, sale tax, GST or other taxes imposed by the Government. | 110.81 | Per cubic metre | |
| 6 | 6 | Providing and Laying hot applied thermoplastic compound 2.5mm (Two decimal five milimetre) thick including reflectorising glass beads at the rate of 250 grams per square metre area, thickness of 2.5mm (Two decimal five milimetre) is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes as per MORTH technical specification clasue 803 complete in all respect including carriage of material within all leads, lifts and other incidentals . The rate is including octrai, royality, Malkana. toll tax, sale tax, GST or other taxes imposed by the Government. | 120 | Per square metre |
AI Tender Summary
Tender Timeline
Feb 07, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 15, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 15, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender