Work Of Construction Commissioning Of 200 Mm Diameter Tubewell With Pipe Line At Rwss Nihalpura Sub Division Sikrai
Tender Value
10.32 Lakhs
Estimated cost
Bid Submission
03 Mar 2020
0 days left
EMD
20640
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mahwa → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Work Of Construction Commissioning Of 200 Mm Diameter Tubewell With Pipe Line At Rwss Nihalpura Sub Division Sikrai
BOQ
| Name of Work: Construction & Commissioning of 200 mm diameter Tubewell with pipe line at RWSS Nihalpura, sub division Sikrai (SPR Basis) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Construction of tube well from ground level & up to 100 mtr depth to accommodate housing and assembly pipe of following sizes in all type of alluvium strata unconsolidated formation such as pebbles, boulders etc. by percussion/rotary drilling method as per IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended upto date) and technical specifications, with gravel as per IS:4097-1967 and it's packing as per IS: 2800 (Part I & II) 1979 as amended up to date (the work includes the cost of gravel & it's primary packing and packing during development, lowering of housing & strainer assembly pipes with supply and wrapping of coir-rope, wherever necessary for arresting fine sand particles and development work, but excluding the cost of housing and strainer pipe assembly). The work would be completed after obtaining sand free water. | BI01010001010000000000000515BI0100001113 | ||
| 2 | 2 | Nominal bore 200 mm dia. | BI01010001010000000000000515BI0100001114 | 80 | R Mtr. |
| 3 | 3 | Construction of tube well after completion of drilling by rotary method & upto 150 mtr. depth in all type of rocks by DTH system as per IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended upto date) and technical specifications. The work shall be deemed completed only after obtaining sand free water. The bore well should have a throughout nominal size bore beyond casing pipe. | BI01010001010000000000000515BI0100001115 | ||
| 4 | 4 | Nominal bore 200 mm dia. | BI01010001010000000000000515BI0100001116 | 100 | R Mtr. |
| 5 | 5 | Supply of ERW M.S. black casing pipe ISI marked (IS: 4270/2001) or amended up to date of following sizes | BI01010001010000000000000515BI0100001117 | ||
| 6 | 6 | 200 mm dia NB (Thickness of pipe 5.4mm & mass of tube 28.46 Kg/m) | BI01010001010000000000000515BI0100001118 | 81 | R Mtr. |
| 7 | 7 | Labour charges for making slots on blank pipes made of ERW MS black pipe of following sizes, the slotting should be as per IS:8110-2000 or as amended up to date. | BI01010001010000000000000515BI0100001119 | ||
| 8 | 8 | 200 mm dia nominal bore of S.4mm thickness | BI01010001010000000000000515BI0100001120 | 18 | R Mtr. |
| 9 | 9 | Development of tube well as per IS: 11189- 1985 and IS: 2800 (Part- I)- 1991 (both amended up to date) using suitable compressor to give sand free water for required yield of the gravel packed tube well. | BI01010001010000000000000515BI0100001121 | 4 | Phr |
| 10 | 10 | Testing verticality of tube well by plumbing system and yield test and draw down test by pumping system as per IS : 2800 (Part – II) – 1979 or as amended up to date. | BI01010001010000000000000515BI0100001122 | 1 | Each |
| 11 | 11 | Providing & laying ISI marked GI Pipe “A” (light) class as per IS:1239 part I 2004 or amended up to date for casing pipe for submersible cable external/internal work 40 mm dia complete in all respect. | BI01010001010000000000000515BI0100001123 | 5 | R Mtr. |
| 12 | 12 | Providing & Lowering in tubewell ISI marked GI Pipe “B\" (medium) class as per IS:1239 part I 2004 or amended up to date, threaded and double flanged (welded) on both ends and two number 25x3mm MS flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect. | BI01010001010000000000000515BI0100001124 | ||
| 13 | 13 | 50 mm dia | BI01010001010000000000000515BI0100001125 | 150 | R Mtr. |
| 14 | 14 | Providing, installing, testing and commissioning of double flanged bulk flow meter with removable mechanism, of class B conforming to ISO 4064/1 or amended upto date of approved make including cost of all material and labour as per specifications with GI Box (sheet 16 SWG) suitable with locking arrangement of following dia. | BI01010001010000000000000515BI0100001126 | ||
| 15 | 15 | 80 mm dia | BI01010001010000000000000515BI0100001127 | 1 | Each |
| 16 | 16 | Supply & Fixing tube well cover of MS sheet 8mm thick at top & Smm thick 100 mm wide shroud around the edge so as to form a cap on the top end of casing pipe with GI Nipple 45cm long & two GI flanges at both end in 80mm sizes passing through a hole in the centre of MS sheet. A 25mm socket with end plug shall also be welded over top plate (as per drawillg enclosed). A GI nipple having outside thread of size 1/2\" (for installation pressure gauge) shall tie provided & welded with 80mm GI nipple near top plate nipple shall be provided with end plug | BI01010001010000000000000515BI0100001127 | ||
| 17 | 17 | 200 mm dia | BI01010001010000000000000515BI0100001127 | 1 | Each |
| 18 | 18 | Supply & Installation of 3 phase ISI marked submersible motor pump set of five star rating by BEE and as per IS: 8034-2018 (pump) and IS 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect. | BI01010001010000000000000515BI0100001127 | ||
| 19 | 19 | 7.5 KW (10.0 HP) & head above 120 mtr. ( 2Nos one no Stend by ) =2*7.5=15Kw | BI01010001010000000000000515BI0100001127 | 15 | Kw |
| 20 | 20 | Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB , fully automatic star-delta starter, over load relay, ampere meter with CTs, volt meter, phase preventor, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. The panel should have space for energy meter ( supplied by DISCOM). All these equipments shall be housed by panel box made out from 18 guage M.S. Sheet with powder coating. Panel should be of minimum size 900 x 600 x 450 mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18\" and double door including in built locking system. The legs should be embedded in M-15 cement concrete plat form.The size of CC plateform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy meter with glass for meter reading. The operation of panel should be suitable for 440 Volt AC Supply. | BI01010001010000000000000515BI0100001127 | ||
| 21 | 21 | Above 10 HP and up to 15 HP | BI01010001010000000000000515BI0100001127 | 1 | Each |
| 22 | 22 | Supply & Fixing of ISi marked three core PVC flat submersible cable as per IS 694: 1990 or amended up to date and conductor as per class 5 of IS 8130: 1980 including making connection etc. | BI01010001010000000000000515BI0100001127 | ||
| 23 | 23 | 3 core 6.0 mm2 | BI01010001010000000000000515BI0100001127 | 310 | R Mtr. |
| 24 | 24 | Providing & Laying XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. | BI01010001010000000000000515BI0100001127 | ||
| 25 | 25 | 10.0 Sq.mm 4 core | BI01010001010000000000000515BI0100001127 | 30 | R Mtr. |
| 26 | 26 | Providing, installation, testing and commissioning of glycerin filled Pressure gauge of following ranges with isolation valve and tap off pipe complete in all respect as per technical specification and as per direction of Engineer | BI01010001010000000000000515BI0100001127 | ||
| 27 | 27 | 0 to +1.0 kg/cm² | BI01010001010000000000000515BI0100001127 | 1 | Each |
| 28 | 28 | Supplying & Installing 100 mm diameter sealed diaphragm bourdon type pressure gauge of range 0 to 10 kg. including all jointing material as per specification with safety cover. | BI01010001010000000000000515BI0100001127 | 1 | Each |
| 29 | 29 | Providing & Fixing of double flanged, Cl body, ISi marked NR V of approved make of following sizes | BI01010001010000000000000515BI0100001127 | ||
| 30 | 30 | 80 mm dia | BI01010001010000000000000515BI0100001127 | 1 | Each |
| 31 | 31 | Providing, lowering, laying and jointing in trenches. standard lengths HDPE ISI marked Pipes as per IS-4984: I 995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/compression fitting joint or flanged joint and specials jointing pipe by butt fusion/ electro fusion welding method, including all taxes transportation and freight charges, inspectioncharges, loading/unloading charges, stacking of pipes, including cost of labour andmaterial,specials (Tee, bend etc.), satisfactory hydraulic testing, 1.4 disinfection etc. complete as pertechnical specifications and direction of Engineer-in-charge of following class and diameter (excluding earth work)Note: Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid. separately. Supply upto 110 mm dia. in coil & above 110 mm dia straight length in6M. | BI01010001010000000000000515BI0100001127 | ||
| 32 | 32 | PE 80 PN-10 | BI01010001010000000000000515BI0100001127 | ||
| 33 | 33 | 90 mm | BI01010001010000000000000515BI0100001127 | 750 | Mtr |
| 34 | 34 | Earth work in excavation by mechanical means. (Hydraulic Excavator/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum of plan ) including dressingof sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering and ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soil. | BI01010001010000000000000515BI0100001127 | 405 | Cum |
| 35 | 35 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001127 | ||
| 36 | 36 | 1:3:6 or richer mix | BI01010001010000000000000515BI0100001127 | 10 | Cum |
| 37 | 37 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. | BI01010001010000000000000515BI0100001127 | ||
| 38 | 38 | M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). | BI01010001010000000000000515BI0100001127 | 10 | Cum |
| 39 | 39 | Fabrication, Supply of flanged/plain ended MS Specials made from MS sheet strips of relevant IS Specification of Approved thickness by welding, lowering, laying, aligning, fixing in position at all level/depths in trenches complete(excluding flanged jointing wherever required) including all material, labour, testing and commisioning along with pipe line as per technical Specifications and direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001127 | ||
| 40 | 40 | MS pipe Specials up to 600mm dia.(With minimum 5mm thickness Sheet) | BI01010001010000000000000515BI0100001127 | 30 | Kg |
| 41 | 41 | Providing, lowering, laying, aligning, fixing in position in pipe line, manually operated CI D/F Sluice valves of approved make (IS: 14846 amended upto date) PN 1.0 class of following dia complete(including jointing and jointing material) including all material, labour testing and commissioning along with pipe line as per TechnicalSpecifications and as per direction of Engineer | BI01010001010000000000000515BI0100001127 | ||
| 42 | 42 | Category \"B\" (Makes / vendors other then Category \"A\" will beconsidered in category \"B\"). | BI01010001010000000000000515BI0100001127 | ||
| 43 | 43 | 80 mm Dia | BI01010001010000000000000515BI0100001127 | 4 | Each |
| 44 | 44 | Supply and fixing of CI singe Air valves PN 1.0 as per IS: 14845 (revised upto date) and as per tender document section-II Technical Specifications: duly inspected and tested by the prevalling inspecting agency of the Department as well as to be inspected at tested at Divisional Store. The work includes supplying and fixing of MS Clamp suitable for various size DI/ uPVC/ HDPE pipelines and 20 swg M.S. sheet chamber welded with MS flats of suitable size for safety of air valve including locking arrangement. | BI01010001010000000000000515BI0100001127 | ||
| 45 | 45 | Size 25 mm dia | BI01010001010000000000000515BI0100001127 | 1 | Each |
AI Tender Summary
Tender Timeline
Feb 06, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedMar 03, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 04, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender