Water Resources Department-WRD has published Construction Of Amusement Park And Recreation Facility Under Tourism Development Programme At Amalnala Project Phase I , Tah Rajura , Dist . Chandrapur. Submission Date for this Tender is 20-02-2020. Event Management Tenders in Chandrapur Maharashtra. Bidders can get complete Tender details and download the document.
| Name of Work :Construction Of Amusement Park And Recreation Facility Under Tourism Development Programme @ Amalnala Project Phase I, Tah Rajura, Dist. Chandrapur | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Item No.1. Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the fo | 1087.68 | Cum | |
| 2 | 2 | Item No.2. Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. | 52.82 | Cum | |
| 3 | 3 | Item No.3.Providing and laying in situ, cement concrete in M15 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, compacting and curing complete, with fully automatic micro processor based PLC with SCADA enab | 221.92 | Cum | |
| 4 | 4 | Item No.4.Providing and casting in situ cement concrete in M20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. Foundations, Columns, Beams, Slabs, Pardi of required thickness including centering, formwork, cover blocks compacting , curing ,finishing & roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel). | 340.1 | Cum | |
| 5 | 5 | Item No.5.Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation, plinth and Super Structure including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. | 417.77 | Cum | |
| 6 | 6 | Item No.6.Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete. | 132.43 | Cum | |
| 7 | 7 | Item No.7.Providing and filling in the foundation with Contractors Material of approved quality including watering, compacting etc. complete. (To be executed with prior approval of Superintending Engineer) | 100.9 | Cum | |
| 8 | 8 | Item No.8.Providing and fixing countary teak wood frame of required size etc complete. | 0.17 | Cum | |
| 9 | 9 | Item No.9.Providing and fixing factory made precasr door / window frames of M-40 grade etc complete. | 25.5 | Rmt | |
| 10 | 10 | Item No.10.Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. | 9.45 | Sqm | |
| 11 | 11 | Item No.11.Providing and Fixing 30 MM thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19 mm for styles and 15 x15 mm for the top and bottom rails, M.S frame shall have a coat of etel primer of approved make and manufacture. M.S frame shall be covered with heat mouled PVC 'C' channel made from 5 mm (+/0.25) thick prelaminated sheet of density 600 kg/cbm ,of size 30mm thickness 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45? angle on either side forming stiles ; and 5 mm thick ,95 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered in 45 on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered on both sides to form lock rail.Top,bottom and lock rail shall be provided either side of the panel. An additional 5 mm (+/0.25) thick PVC strip of 20 mm width is to be stuck on the bottom side of the ' c ' channel prelaminated paneling of 5 mm (+/0.25) thick PVC sheet to be fitted inside the M.S. frame welded/ sealed to the styles and rails with 5 mm (+/0.25) x 30 mm PVC sheet beading on either side and joined together with solvent cement adhesive etc ,10 mm thickness (5 mm (+/0.25) x 2 nos ) 20 mm wide cross PVC sheet as gap insert for the rail and bottom rail. Door to be fixed to frames with 3 nos M.S.powder coated but | 7.56 | Sqm | |
| 12 | 12 | Item No.12.Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm\nthick plain glass with all required screws and nuts etc, complete. With colour Anodising with box. | 2.7 | Sqm | |
| 13 | 13 | Item No.13. Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 6 mm thick high performance glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box. | 8.88 | Sqm | |
| 14 | 14 | Item No.14.Providing and fixing in position anodised (as per IS 1868/1982) Aluminium fixed staggered ( Z Type ) V entilator with aluminium rectangular pipe 63 mm x 38.10 mm x 1.22 mm at weight 0.650 Kg/Rmt, Aluminium angle of size 15 mm x 15 mm x 1 mm, aluminium channel of 9 mm sizes, S.S.mosquito net of 304 Grade, 6 mm thick high performance glass as per detailed drawing & as directed by Engineer in charge etc.complete. | 0.72 | Sqm | |
| 15 | 15 | Item No.15.Providing and fixing mild steel grill work for windows, ventilators, Door etc. 20 / 24 kg/sqm as per drawing including fixtures, necessary welding & painting with one coats of anticorrosive paint & two coats of oil painting complete. | 279.3 | Sqm | |
| 16 | 16 | Item No.16.Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days an | 1692.9 | Sqm | |
| 17 | 17 | Item No.17.Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete | 478.49 | Sqm | |
| 18 | 18 | Item No.18.Providing internal cement plaster 12mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete | 1941.45 | Sqm | |
| 19 | 19 | Item No.19.Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 with putty in two coats to receive approved paint in all positions including scaffolding and curing. Providing groove at joint of B.B.Masonry and concrete members complete. (In ceiling) | 159.52 | Sqm | |
| 20 | 20 | Item No.20.Providing and applying two coats Apex Ultima Puranature Anti- Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC’s, CO, SOx,formaldehydes, etc.) in presence of natural or artificial light. It co | 2665.8 | Sqm | |
| 21 | 21 | Item No.21.Providing and applying 2 Coats of 100% Pure acrylic low VOC water based paint with to withstand for period of atleast 5 years Jotun Easycoat Plus Silk or equivalent make. Paint should provide durable long lasting silk finish with high resistance to UV and resistance to spreading of flame. Paint should protect against concrete carbonation with R value of minimum 600 and ability to built cracks upto min 0.7mm. The paint has to be applied on High quality water based acrylic copolymer primer with good alkali resistance properties. with all leads and lifts at all levels etc. complete, as directed by Engineer in charge. | 254.01 | Sqm | |
| 22 | 22 | Item No.22.Providing and applying Nerolac impression 24 carrat Luxury or equivalent approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surface in two coats, including sub surface prparation by Acrylic putty and Acrylic primer coats including scaffolding, preparing the surface. etc. complete (Low VOC) | 411.15 | Sqm | |
| 23 | 23 | Item No.23.Providing and applying interior wall finish luster of Asian / Berger / Nerolac / Dulux Paints or equivalent make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean. Applying Asian / Berger / Nerolac / Duuex Paints or equivalent\nwall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours. Applying Asian / Berger / Nerolac / Dulex Paints or equivalent Acrylic wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applying Asian / Berger / Nerolac / Dulux Paints or equivalent wall primer with brush with mineral turpentine 8 to 10% and oil 15 to\n20% with roller Scrapping Emery paper 320 and wipe clean, Applying Asian / Berger / Nerolac / Dulux Paints or equivalent interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying 2nd coat of Asian / Berger / Nerolac / Dulux Paints or equivalent interior wall finish Lustre with mineral turpentine 7 to 9 % with brush and Oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity. (With prior approval of S.E.) | 307.71 | Sqm | |
| 24 | 24 | Item No.24.Providing and applying two coats of appex Appex Ace white exterior paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. | 17.28 | Sqm | |
| 25 | 25 | Item No.25.Providing and laying machine cut machine Polished Kota stone flooring , Treads, Rise, Skirting, Dado, Jambs & Sills 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, with miror polishing and cleaning etc. complete. | 273.77 | Sqm | |
| 26 | 26 | Item No.26.Providing and laying vitrified rustic matt stone finish / Mirror finish tiles of RAK/Kajaria/ Nitco/ Asian or equivalent make having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10mm thickness in Flooring and confirming to IS. 156222006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. | 140.96 | Sqm | |
| 27 | 27 | Item No.27.Providing and laying ceramic tiles of RAK/ Kajaria / Nitco /Asian or equivalent make having size 30 cm. x 60 cm. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. | 1276.78 | Sqm | |
| 28 | 28 | Item No.28.Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar & For Partition both side poslished including float filling joints with neat cement slurry curing polishing and cleaning etc.. | 29.35 | Sqm | |
| 29 | 29 | Item No.29.Providing and Laying factory made coloured chamfered edge Cement concrete grass paver blocks of required strength,thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of fi | 370.1 | Sqm | |
| 30 | 30 | Item No.30.Providing and fixing in position TMT steel reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams and columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches etc. as per detailed design and drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as reuired completed. | 21.27 | MT | |
| 31 | 31 | Item No.31.Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. | 10.39 | MT | |
| 32 | 32 | Item No.32.Providing and fixing of colour coated zinc aluminium ® AZ 150 min 150 gm / Sq Mt total on each side) profilled sheet for roofing etc complete. | 291.15 | Sqm | |
| 33 | 33 | Item No.33.Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 kg/sq.m.). | 20.3 | Rmt | |
| 34 | 34 | Item No.34.Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 40mm diameter and 1.5mm thick at top,40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete | 165.33 | Sqm | |
| 35 | 35 | Item No.35.Providing , laying and fixing ,jointing Eco- drain 110 mm SN 8 Nu- Drain Upvc pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees, coupler, etc, jointing with rubber lubricant including necessary excavation,\ntrench refilling with selective excavated material etc. complete. | 35.85 | Rmt | |
| 36 | 36 | Item No.36.Providing and fixing Orissa Pan of size 580x445x260 mm -code no. CNS-WHT-451 with Jaquar or equivalent make flush valve with code no. FLV-1089 / 1089 SQG, including trap, C.I. soil and vent pipe upto outside face of wall including 100mm dia. C.I. plug, bend and necessary pipe connection .etc complete.as directed by Engineer in charge | 1 | Nos | |
| 37 | 37 | Item No.37.Providing and fixing white Opal series European type wall-hung, Code is OPS-WHT15951 of size 400mm x370mm x 575mm with Jaquar or equivalent make flush valve having code no. FLV-1089SQG, including soil pipe, vent pipe upto outside face of wall, 100mm dia C.I. plug bend inlet pipe all fittings,cutting & making good walls, floors etc as directed by Engineer in charge | 1 | Nos | |
| 38 | 38 | Item No.38.Providing and fixing wall hung white wash basin of size 470x575x190 mm -code no. OPSWHT-15801,with Jaquar or equivalent make half pedestal, code no. OPS-WHT-15305 with Jaquar or equivalent make pillar cock, code no. CON-021KN / 021KN G / 021KN GA / 021KN GB / 021KN GD, C.P.Angular stop cock long thread jaquar or equivalent make continental (Cat.No. CON-059) including SS bottal trap of jaquar or equivalent make having code no. ESS-773 NB and necessary pipe connection up to the outside face of the wall.etc complete.\n | 4 | Nos | |
| 39 | 39 | Item No.39.Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall | 12 | Nos | |
| 40 | 40 | Item No.40.Providing and fixing 450mm x 550mm size superior type mirror with 16 mm dia. Nickel plated towel rod etc. complete. | 4 | Nos | |
| 41 | 41 | Item No.41.Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete | 4 | Nos | |
| 42 | 42 | Item No.42.Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete | 2 | Nos | |
| 43 | 43 | Item No.43.Providing and fixing 10cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete. | 7 | Nos | |
| 44 | 44 | Item No.44.Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. | 5 | Nos | |
| 45 | 45 | Item No.45.Providing & constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. I. lid 65 kg with frame fixed in cement concrete etc. complete. | 3 | Nos | |
| 46 | 46 | Item No.46.Providing and fixing on walls/ ceiling/ floor ISI mark CPVC pipe of required diameter with necessary fittings, remaking good the demolished portion etc. complete.\n15 mm | 2929.25 | Rmt | |
| 47 | 47 | 20 mm | 1537.52 | Rmt | |
| 48 | 48 | 25 mm | 3000 | Rmt | |
| 49 | 49 | 32 mm | 60 | Rmt | |
| 50 | 50 | 40 mm | 78.65 | Rmt | |
| 51 | 51 | 50 mm | 270 | Rmt | |
| 52 | 52 | Item No.47.Providing , laying and fixing ,jointing Eco- drain 110 mm SN 8 Nu- Drain Upvc pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees, coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etc. complete\n110 mm | 219.21 | Rmt | |
| 53 | 53 | 160 mm | 54.65 | Rmt | |
| 54 | 54 | Item No.48.Providing and fixing screw down for required dia. wheeled stop tap of brass including necessary sockets/union nut complete.\n15 mm | 20 | Nos | |
| 55 | 55 | 20 mm | 22 | Nos | |
| 56 | 56 | 25 mm | 10 | Nos | |
| 57 | 57 | 32 mm | 10 | Nos | |
| 58 | 58 | 40 mm | 10 | Nos | |
| 59 | 59 | 50 mm | 8 | Nos | |
| 60 | 60 | Item No.49.Providing and fixing C.P. BIB cock with wall flange of Jaquar or equivalent make Code No.FLR- 5047N GE or equivalent including necessary sockets/ union nut etc. complete as directed by Engineer in charge. | 8 | Nos | |
| 61 | 61 | Item No.50.Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters | 11500 | Ltr | |
| 62 | 62 | Item No.51 Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. | 1 | Nos | |
| 63 | 63 | Item No.52.Providing and fixing 15 mm diameter PVC Aqua kraft type of approved make super bib tap with flange including all accessories etc complete | 200 | Nos | |
| 64 | 64 | Item No.53.Providing and fixing 40 mm dia. Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements testing etc. complete. | 8 | Nos | |
| 65 | 65 | Item No.54.Providing and fixing screw down for 20 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. | 4 | Nos | |
| 66 | 66 | Item No.55.Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983). | 3.78 | Sqm | |
| 67 | 67 | Item No.56.Providing and fixing mat finish stainless steel lettering of various heights as directed by enginner incharge including material, labour, cleaning etc. complete.\na. for single letter like A, B, C etc in English and ????? ?????\n1) Upto height of 30 cm | 1500 | /Cm of Height | |
| 68 | 68 | 2) Upto height of 45 cm | 1445 | /Cm of Height | |
| 69 | 69 | b) For half letters ????? ?????? \n1) Upto height of 30 cm | 350 | /Cm of Height | |
| 70 | 70 | 2) Upto height of 45 cm | 550 | /Cm of Height | |
| 71 | 71 | Item No.57.Supplying at site R.C.C Standard Post / Struts / Rails / Poles of Mix (1:1.5:3) (1-Cement , 1.5 Course Sand, 3- Graded Stone Aggregate of 12.50 mm Nominal Size) with 6 mm duia Reinforcement bar where ever required as per direction of Engineer Incharge) / M-20 Grade concrete (cost of earth work in excavation, Concrete work in foundation for fixing pole excluding) | 1141 | Nos | |
| 72 | 72 | Item No.58.Providing and Fixing Chainlink (10 guage ) including transportation and fixing at proper position etc. Providing and erecting 1.65 m high chain link fencing with chain link having hole size 100 x 100 mm supported on R.C.C post of size 125x125x 2.15 m at 2.50 m c/c etc complete (Excluding cost of RCC Post) | 2281 | Rmt | |
| 73 | 73 | Item No.59.Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats. | 3 | Nos | |
| 74 | 74 | Item No.60. Survey for source certificate | 2 | Nos | |
| 75 | 75 | Item No.61. Drilling Bore of 150 MM etc complete. | 120 | Rmt | |
| 76 | 76 | Item No.62. Providing UPVC casing pipe 150 MM(kg/sqm)(1.5 4985-1988) lowering handaling and grouting etc. | 120 | Rmt | |
| 77 | 77 | Item No. 63. Carrying out yield test of tubewell by electric pump including charges of contractor etc complate. | 3 | Nos | |
| 78 | 78 | Item No.64.Supplying & erecting mains with 2x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW | 70 | mtr | |
| 79 | 79 | Item No.65 .Supplying & erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW | 70 | mtr | |
| 80 | 80 | Item No.66.Supplying & erecting mains with 2x4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW | 50 | mtr | |
| 81 | 81 | Item No.67.Supplying & erecting mains with 2x6 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW | 245 | mtr | |
| 82 | 82 | Item No.68.Supplying & erecting mains with 1x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW | 140 | mtr | |
| 83 | 83 | Item No.69.Supplying & erecting mains with 1x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW | 50 | mtr | |
| 84 | 84 | Item No.70.Supplying & laying Rigid PVC conduit 25 mm Dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC, para no. 1.2.1 | 75 | mtr | |
| 85 | 85 | Item No.71.Point wiring for light/fan/bell in 20 mm rigid PVC conduit with 1.5 sq.mm (2+1E) FR grade copper wire,modular type switch, earthing and required accessaries as per specification No: WG-PW/SW | 70 | point | |
| 86 | 86 | Item No.72.Supplying and erecting modulartype electronic step regulator for fan two module ISI mark approved make duly erected on provided plate and box with wiring connections\ncomplete.Note: Add Rs 60/- provision of additional two modules for box and double plate | 18 | each | |
| 87 | 87 | Item No.73.Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner | 9 | each | |
| 88 | 88 | Item No.74.Concealing provided M.S./ PVC switch box in wall with finishing in an approved manner as per specification No: WG-PW/CW | 41 | each | |
| 89 | 89 | Item No.75.Supplying and erecting modular type T.V. socket single outlet ISI mark approved make duly erected on provided plate and box with wiring connections complete | 1 | each | |
| 90 | 90 | Item No.76.Supplying and erecting modular type switch 6A / 10A ISI mark approved make duly erected on provided plate and box with wiring connections complete | 7 | each | |
| 91 | 91 | Item No.77.Supplying and erecting modular type switch 16A ISI mark approved make duly erected on provided plate and box with wiring connections complete | 7 | each | |
| 92 | 92 | Item No.78.Supplying and erecting modular type 3 pin 6A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete | 7 | each | |
| 93 | 93 | Item No.79.Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. | 7 | each | |
| 94 | 94 | Item No.80.Supplying and erecting modulartype electronic step\nregulator for fan two module ISI mark approved make duly erected on provided plate and box with wiring connections complete.Note: Add Rs 60/- provision of additional two modules for box and double plate | 12 | each | |
| 95 | 95 | Item No.81.Supplying & erecting I.S.I. mark Rigid P.V.C. conduit 25 mm. dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WGMA/CC, para no. 1.2.1 | 30 | each | |
| 96 | 96 | Item No.82.Concealing of provided ISI mark G.I. pipe/H.G. screwed conduit/PVC pipe in wall/floor/false ceiling complete as per specification No:WG-PW/CW | 30 | each | |
| 97 | 97 | Item No.83.Supplying and erecting exhaust fan heavy duty230 v.C 375/380mm etc complete. | 3 | each | |
| 98 | 98 | Item No.84.Supplying and Erecting regular/ standard model Ceiling fan of 1200 mm. sweep complete erected in position as per specifcation no. FG-FN/CF | 6 | each | |
| 99 | 99 | Item No.85.Supplying and erecting single pole and neutral distribution board (SPNDB) with doorsurface/flush mounted with 2 ways for incoming and 10 ways for outgoing SP MCB’s on iron/ G.I. frame/wooden board as per specification No. SWSWR/MCBDB | 2 | each | |
| 100 | 100 | Item No.86.Making suitable size recess in any type of false ceiling for erection of flush type down lighter and finishing the background to match the original surface upto 20W. | 14 | each | |
| 101 | 101 | Item No.87.Supplying and erecting double pole metal /iron clad switch with H.C. type fuse and neutral link 240V, 32Aon iron / G.I. frame/board as per specification No. SW-SWR/MDP | 2 | each | |
| 102 | 102 | Item No.88.Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification No. SWSWR/MCB | 7 | each | |
| 103 | 103 | Item No.89.Supplying, erecting & marking SPMCB 6A to 32A, C- series (for Power) in provided distribution board as per specification No. SWSWR/MCB | 7 | each | |
| 104 | 104 | Item No.90.Supplying erecting and marking double pole isolator only switch version of miniature circuit breaker (Conforming to IS:8828 of1996) of 40A with required wiring connections and lugs etc. in provided distribution board. | 1 | each | |
| 105 | 105 | Item No.91.Supplying and erecting CRCA /die-cast aluminium powder coated housing LED Panel light (slim edge-lit) square / round shape suitable for 13 to 15 W with provision for plane front frame with translucent cover fixed to the housing complete | 28 | each | |
| 106 | 106 | Item No.92.Supplying and erecting ‘B’ grade G.I.pipe/M.S. pipe down rod dulypainted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire. | 18 | each | |
| 107 | 107 | Item No.93.Supplying & fixing Anchor type fastener Fan hook, with 2 Nos of 10mm dia x 75 mm long with necessary materials for Ceiling Fan. | 18 | each | |
| 108 | 108 | Item No.94.Supplying, erecting & terminating PVC armoured cable 2 core 10 sq mmaluminiumconductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ pole or laid in provided trench/ pipe as per specification no. CB-LT/AL | 45 | each | |
| 109 | 109 | Item No.95.Providing earthing with Galvanized cast iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. complete with all materials, testing & recording the results as per specification\nNo. EA-EP | 1 | each | |
| 110 | 110 | Item No.96.Supplying & erecting triple pole and neutral distribution board (TPNDB)with door surface/ flush mounted SPMCB of12 ways, on iron / G.I. frame/wooden board.(Horizontal type) as per specification No. SW-SWR/MCBDB | 1 | each | |
| 111 | 111 | Item No.97.Supplying and erectingLED Street light fitting suitable for above 40W to 48W lamp, including lamp, with PF > 0.95 class IP 65 and above Housing of pressure die cast alluminium alloy and heat sink extruded alluminium complete per specification No . FG-ODF/FLS2 | 14 | each | |
| 112 | 112 | Item No.98.Supplying and erecting street light Wall bracket made from mm.dia ‘B’class G.I. pipe 1.2 m in total length complete as per specification no. FG-BKT/WB | 4 | each | |
| 113 | 113 | Item No.99.Supplying and erecting square / rectangular shaped CRCA /die-cast aluminium powder coated housing LED Panel (slim edge-lit) light suitable for 25 to 32Wwith provision for plane front frame with translucent cover fixed to the housing complete | 18 | each | |
| 114 | 114 | Item No.100.Supplying, erecting & terminating PVC armoured cable 4 core 16 sq mmaluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ russes/pole or laid in provided trench/ pipe as per specification no. | 500 | mtr | |
| 115 | 115 | Item No.101.Supplying and laying (including excavation) 77 mm outside dia. double wall corrugated pipes (DWC)of HDPE for enclosing cable below ground/road surface, to required depth complete. | 500 | mtr | |
| 116 | 116 | Item No.102.Supplying and erecting ISI mark G.I. pipe pole ‘B’ grade 80 mm dia 6 m long with pole cap, base plate in provided foundation as per specification No. OH-PL/GIP | 10 | each | |
| 117 | 117 | Item No.103.Providing cement concrete foundationincluding excavation for the poles (45 cm x 45 cm x 1.2 m) deep in 1:3:6 cement concrete (20 to 25 mm stone metal) and 45 cm x 45 cm x 45 cm / 45 cm dia. x 45 cm height plinth duly plastered and with necessary curing an | 10 | each | |
| 118 | 118 | Item No.104.Supplying and erecting Street light bracket made from 40 mm. dia‘B’class G.I. Pipe, 0.6m. in lengthalong with pole cap of 300 mm length and 80 mm dia duly welded with provided leads as per specification no.FG-BKT/BPC | 10 | each | |
| 119 | 119 | Item No.105.Supplying and erectingLED Street light fitting suitable for above 40W to 48W lamp, including lamp, with PF > 0.95 class IP 65 and above Housing of pressure die cast alluminium alloy and heat sink extruded alluminium complete per specification No . FG-E16D | 10 | each | |
| 120 | 120 | Item No.106.Supplying and erecting Triple pole metal/ iron clad switch and fuse 415 / 500V 63A on angle iron / G.I.frame as per specification No. SW-SWR/MTP | 2 | 5 | each |
| 121 | 121 | Item No.107.Supplying & erecting water tight terminal box of 1.6 mm (16 gauge) CRCA sheet of size 150 x 100 x 100 mm complete on pole as per specification No. CB-SB | 10 | each | |
| 122 | 122 | Item No.108.Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification No. SW-SWR/MCB | 10 | each | |
| 123 | 123 | Item No.109.Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification No. EA-EP | 5 | each | |
| 124 | 124 | Item No.110.Supplying and erecting Triple pole metal clad/ iron clad rewireable fuse 415/ 500V 200Awith neutral link on angle iron/ G.I.frame as per specification No. SW-SWR/MTP | 5 | each | |
| 125 | 125 | Item No.111.Supplying and erecting Bus bar chamber triple pole with neutral with four aluminium bars, 500V 200Acomplete as per specification no. CP-BB | 5 | each | |
| 126 | 126 | Item No.112.Supplying and erecting submersible pumpset of 2.25 KW/3 HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell suitable for 20 to 80 LPM discharge at 55 to 25 m head and (max. efficiency at 41 m head & 50 lpm) discharge & delivery Pipe of Size- | 2 | each | |
| 127 | 127 | Item No.113.Supplying and erecting submersible pumpset of 2.25 KW/3 HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell suitable for 20 to 80 LPM discharge at 55 to 25 m head and (max. efficiency at 41 m head & 50 lpm) discharge & delivery Pipe of Size- | 2 | each | |
| 128 | 128 | Item No.114.Supplying & erecting flat flexible 3 core 16 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with coloum pipe assembly complete | 200 | each | |
| 129 | 129 | Item No.115.Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification no. EA-EP | 2 | each | |
| 130 | 130 | Item No.116.Supplying, erecting & marking SPMCB 6A to 32A, C- series (for Power) in provided distribution board as per specification No. SWSWR/MCB | 4 | each | |
| 131 | 131 | Item No.117.Supplying erecting and marking double pole isolator only switch version of miniature circuit breaker (Conforming to IS:8828 of1996) of 40A with required wiring connections and lugs etc. in provided distribution board. | 4 | each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
