Irrigation And Public Health Department has published Providing Lwss To Pc Hab In Gp Bhargaon Kotli Dhanyara Uperli Surari Khalanoo Tehsil Sadar Distt Mandi Hp Sh Co Wtp 1 . 38 Mld Ic Rail Cum Trolley System Winch Room Fencing Approach Road Co Pump House Cum Attendant Room Above 50 H. Submission Date for this Tender is 17-02-2020. Water Supply Project Tenders in IPH Division Mandi Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Name of Work : Providing LWSS to PC Habitation in G.P. Bhargaon, Kotli, Dhanyara, Uperli Surari & Khalanoo Tehsil Sadar Distt. Mandi (H.P.) (SH:- C/O WTP 1.38 MLD i/c Rail Cum trolley System, Winch Room, Fencing, Approach Road, C/O Pump house cum attendent room above 50 HP with internal wiring, C/O WC & Toilet with WTP, C/O Sump Well / Clear Water Tank 55000 Lit. Cap., Main Storage Tank 124000 Lit. Cap., 20 Nos. Sector Storage Tank of various capacity and C/O Pump house cum attendent room below 50 HP with internal wiring and C/O WC & Toilet with pump house). | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Construction , testing and commissioning of 1.38 MLD capacity water treatment plants capable to treat the raw water of the quality as specified in the basic design data to produce clear water as per the requirement of CPHEEO manual on Water Supply and Treatment. The water treatment plant shall include the construction of Approach road, Development of site for C/O approach road, Raw Water Tank, Inlet Chamber, Inlet Channel and Pashal Flume, Prestling Tank, Flash Mixture Unit, Floculator, Settling Tank, Rapid Sand Gravity Filter, Back Wash System, Clear Water Tank, Plant Building, Pump house, Gaseous chlorination, Laboratory Equipments, WC toilet and provision for Barbed wire fencing complete, disinfection arrangement with bleaching powder, plant building (for chemical store cum dosing room, water testing laboratory cum attendant room and toilet), piping, valves, mechanical/electric equipment, electric wiring and panel boards, sanitation, interconnecting path, railing site development upto a minimum of 3 meters from edge of battery limit of plant, retaining and breast walls including pump house above 50 HP 1st stage fencing and compound gate complete in all respect. | 1 | Job | |
| 2 | 1.01 | Note:-\n(1). The Lump-Sum Price bid of the contractor shall consist of following three parts.\n(a). Cost of WTP component including pump house cum WC toilet mechanical/electrical works (excluding site development).\n(b). Cost of site development work including R/wall, B/wall etc.\n(c ). C/O Cost of fencing work.\n(d). Cost of Gaseous Chlorination.\n(e) C/O Approach roadh for WTP.\n( f). Total Cost = ( a+b+c+d+e).\n(2). The detailed design parameters /specification and conditions shall be as per detailed design parameters.\n(3). The contractor/ firm shall propose the layout of WTP units in such a manner that the cost of site development is minimum. \nTerms and Condition:- \nThe firm shall submit the detailed hydraulic and structural design and drawing for each component of treatment plant which shall be approved by the department before the work is started. Before submitting the hydraulic as well as structural design and drawing for approval by the department it should be duly vetted from any of institution mentioned below:-\n(ii) Any of IIT/NIT\n(iii) (ii) Punjab Engineering College Chandigarh | |||
| 3 | 1.02 | The design/ drawing of mechanical/ electrical equipment and wiring etc. along with manufacture’s specification/design also be submitted for approval of the department after vetting. In design and drawings the contractor/ firm shall submit the design calculations clearly indicating various formulae used and reference of books IS codes thereto. The contractors/ firms shall also supply software copy.(CD) of design calculation along with basic data used in the design so as to facilitate the quick checking/approval of the same. On the completion of all civil mechanical and electrical works, the contractor shall test/run the plant for 10 days before handing over the same to the department at the risk and cost of the contractor, however, electrical charges shall be borne by the department. | |||
| 4 | 1.03 | During this period the contractor shall run the plant of full rated capacity and produce the results as per the CPHEEO standards and ISI codes in the presence of Engineer-in-Charge or his representative. During this period , the daily testing of raw water and treated water samples shall be done. Complete record of the test results and the flow measurement shall be kept during this period. If the performance of various units of the treatment plant is as specified in the CPHEEO Manual the plant shall be formally taken over by the department, otherwise the contactor shall make necessary changes/ repair to improve the efficiency of the units/plant.\nThe contractor/ firm shall run and maintain the plant for further 90 days after handing over the plant to the department. During this period the firm shall depute at least one trained person to train the departmental persons in operating, maintaining the plant and regular testing of the raw water and treated water samples in the laboratory for the same period shall be done. During this period. Only energy charges shall be borne by the department. The contractor/ firm shall be responsible for any \n | |||
| 5 | 1.04 | break down of the machinery/ equipment and shall have to repair all the fault/defects as directed by the Engineer-in-Charge. Out of 90 days one month should preferably be Monsoon to test the plant for heavy silt loads. | |||
| 6 | 2 | Excavation in foundation and trenches etc.in earth work in all kind of soil such as pick work,jumper work,saturated soil including bailing or pumping out water,blasting soft./hard rock ,chiselling soft/.hard rock where blasting is prohibited in all leads & lifts including trimming and dressing of sides,levelling of bed,stacking the excavated soil clear from the edge of excavation and then returning the excavated soil in 15cm.layers including consolidating each deposited layer by ramming ,watering and then disposing of all surplus excavated soil as directed in all leads/lifts and shoring,strutting,timbering and dewatering where ever required as per direction of the Engineer-in-charge. | 562.93 | Cum | |
| 7 | 3 | Providing and laying cement concrete 1:6:12( 1cement:6 sand: 12 graded stone aggregate 40 mm nominal size) and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts. | 22.24 | Cum | |
| 8 | 4 | Providing and laying cement concrete 1:3:6 (1 cement: 3 sand : 6 graded stone aggregate 40 mm nominal size) and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts. | 67.4 | Cum | |
| 9 | 5 | Providing and laying cement concrete 1:2:4 ( 1cement:2 sand: 4graded stone aggregate 20 mm nominal size )and curing complete excluding the cost of form work and reinforcement in:- | |||
| 10 | 5.01 | Foundation, footing basis of columns and the like and mass concrete in all leads and lifts. | 5.29 | Cum | |
| 11 | 5.02 | Suspended floors, roofs,landings and shelves and their supports, balconies, beams, girders, bressumers and cantilivers up to floor two level in all leads and lifts. | 51.93 | Cum | |
| 12 | 6 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring shuttering ,strutting and propping etc.with wooden battens and ballies,height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for in situ reinforced concrete and plain concrete work in:- | |||
| 13 | 6.01 | Flat surfaces such as soffits of suspended floors roofs landings and the like floors etc. up to 200 mm in thickness in all leads and lifts. | 414.86 | Sqm | |
| 14 | 6.02 | Vertical surfaces such as walls (any thickness) partitions and the like including attached pillaster,buttresses plinth and string courses and the like in all leads and lifts. | 1325.04 | Sqm | |
| 15 | 6.03 | Beams,cantilivers,girders and lintels sides and soffits of beams,beam haunchings, cantilivers , girders, bressumers and lintels not exceeding 1 metre in depth in all leads and lifts. | 21.06 | Sqm | |
| 16 | 6.04 | Foundation, Footings & bases of columns and the like mass concrete with in all leads and lifts complete in all respect. | 23.78 | Sqm | |
| 17 | 7 | Providing form work of ordinary timber plankings so as to give a rough finish including centering,shuttering propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 meters and removal of the same for in-situ reinforced concrete and plain concrete work in :- arches exceeding 6 mtrs span, domes, vaults upto all span. | 68.06 | Sqm. | |
| 18 | 8 | Providing and laying cement concrete 1:1.5:3(1cement:1.5 sand:3 graded stone agg.20mm nominal size )& curing complete excluding the cost of form work and reinforcement for reinforced concrete work in: | |||
| 19 | 8.01 | Foundation and plinth in all leads and lifts. | 51.94 | Cum | |
| 20 | 8.02 | Walls ( any thickness but not less than 0.1 m thickness) attached pillasters, buttresses, plinth and string courses, etc. from top of foundation level upto floor two level in all leads and lifts. | 100.94 | Cum | |
| 21 | 9 | Providing and laying cement concrete 1:2:4 ( 1cement:2 sand: 4graded stone aggregate 20 mm nominal size )and curing complete excluding the cost of form work and reinforcement in suspended floors, domes, roofs,landings and shelves and their supports, balconies, beams, girders, bressumers and cantilivers up to floor two level in all leads and lifts. | 6.52 | Cum | |
| 22 | 10 | Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete up to floor two level in all leads and lifts. | 19389.6 | Kg | |
| 23 | 11 | Random rubble masonary/Polygonal rubble masonary (coursed or brought to courses with hard stones of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 in cement mortar 1:6 (1 cement : 6 sand) in all leads and lifts. | 56.62 | Cum | |
| 24 | 12 | Boulder filling tightly hand packed under floor in all leads and lifts. | 22.17 | Cum | |
| 25 | 13 | Brick work using common burnt clay building bricks in foundation and plinth in cement mortor 1:6 (1 cement : 6 sand) 2nd Class in all leads and lifts. | 63.54 | Cum | |
| 26 | 14 | Half bricks masonry in common burnt clay building bricks in cement mortar 1:4 (1 cement : 4 Sand). In all leads and lifts. | 14.2 | Sqm | |
| 27 | 15 | Providing and fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges, jump lock jamb, beed and if required angle threshold of mild steel angle of section 50X25 mm or base ties of 1.25 mm pressed mild steel welded or regidly fixed together by mechanical means, adjustable lugs with split and tails to each jamb including steel but things 2.5 mm thick with gaurds, lock strike plate and shock as specified and applying a coat of approved steel primer after pretreatment of the surface as directed by Engineer-in-charge in all leads and lifts. Profile C | 124.94 | Rmt | |
| 28 | 16 | Providing and fixing panneled glazed or panelled and glazed shutters for doors, windows and clerestorey windows,including black enamelled iron butt hinges with necessary screws. 45 mm thick. 2nd class deodar wood in all leads and lifts. | 28.04 | Sqm | |
| 29 | 17 | Providing & fixing M.S. grills of required pattern in wooden frame of window etc.with M.S. flats, square or round bars with round headed bolts and nuts by screws. Plain grills in all leads and lifts. | 143 | Kg | |
| 30 | 18 | 6mm cement plaster to ceiling in CM 1:3 ( 1Cement :3 Sand) in all leads and lifts. | 178.85 | Sqm | |
| 31 | 19 | 15 mm cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering up to floor two levels including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:6 (1 cement:6 sand) in all leads and lifts . | 234.3 | Sqm | |
| 32 | 20 | 20 mm cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering up to floor two levels including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:6 (1 cement:6 sand) in all leads and lifts . | 30.03 | Sqm | |
| 33 | 21 | Pointing on brick work with cement mortor 1:3 (1cement : 3 sand) Raised and Cut pointing in all leads and lifts. | 127.71 | Sqm | |
| 34 | 22 | White washing with lime on undecorated wall surfaces two coats to give an even shade including thoroughly brooming the surface to remove all dirt , dust and other foreign matters in all leads and lifts.. | 171.83 | Sqm | |
| 35 | 23 | Distempering with dry distemper of approved brand and manufacture (two coats) and of required shade on undecorated wall surfaces to give an even shade, sand papered smooth in all leads and lifts.. | 241.32 | Sqm | |
| 36 | 24 | Finishing wall with water proofing cement paint of approved brand and manufacture (two coats) brushing to give an even shade i/c cleaning of oil, dirt, dust and other foreign matters, sand papering and knotting etc. With in all leads and lifts complete in all respect. | 30.03 | Sqm | |
| 37 | 25 | Applying priming coat on new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil,greese,dirt and other foreign matters,sand papering and knotting.Ready mixed paint brushing wood primer pink in all leads and lifts. | 56.48 | Sqm | |
| 38 | 26 | Painting two coats (excluding priming coat) on new wood and wood based surfaces,with enamel paint to give an even shade including cleaning the surface of dirt ,dust and other foreign matters, sand papering and stopping with enamel paint other than white in all leads and lifts. | 56.48 | Sqm | |
| 39 | 27 | Providing and fixing oxidzed MS sliding door bolts with nuts screws etc. Complete in all leads and lifts. | |||
| 40 | 27.01 | 300 *16 mm | 6 | Nos. | |
| 41 | 28 | Providing and fixing oxidzed MS tower bolts ( barrel type) with screws etc. Complete in all leads and lifts. | |||
| 42 | 28.01 | 250 * 10 mm | 62 | Nos. | |
| 43 | 28.02 | 150 * 10 mm | 2 | Nos. | |
| 44 | 29 | Providing ad fixing oxidzed MS handles with necessary screws etc. Complete in all leads and lifts. | |||
| 45 | 29.01 | 125 mm | 2 | Nos. | |
| 46 | 29.02 | 100 mm | 42 | Nos. | |
| 47 | 30 | Providing plinth protection 50 mm thick in cement concrete 1:3:6 (1cement:3sand:6 graded stone aggregate 20 mm nominal size in all leads and lifts. | 30.73 | Sqm | |
| 48 | 31 | Precast terrazzo tiles hydraulic compressed 20 mm thick with marble chips of specifid sizes laid in floors, treads of steps and landing on a bed of 25 mm average thickness of cement mortor 1:6 ( 1Cement :6 sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles of dark shade including rubbing and polishing complete in all leads and lifts. | 86.28 | Sqm | |
| 49 | 32 | White glazed tiles 6mm thick in flooring, cement mortar 1:3(1cement:3 sand) finished with flush pointing in white cement in all leads and lifts. | 4.32 | Sqm | |
| 50 | 33 | White glazed tiles 6mm thick in skirting, risers of steps and dado 12mm thick cement mortar 1:3(1cement:3 sand)and jointed with cement slurry in all leads and lifts. | 6.12 | Sqm | |
| 51 | 34 | Providing and fixing of Steel/fibre reinforcement concrete (SFRC) manhole cover with frame conforming to IS-12592 (Part - I)-1998 with latest amendments 560 mm dia medium duty in all leads and lifts. | 22 | No. | |
| 52 | 35 | Supplying and fixing of cast iron manhole cover with frame 455x610 mm rectangular C.I.cover (light duty)single seal pattern the weight of cover 23kg.and weight of frame 15kg..The total weight of cover and frame to be not less than 38 kg.complete in all leads and lifts. | 2 | No | |
| 53 | 36 | Providing and fixing of MS Fabricated Protection Panel having size 750 mm x 750 mm made with MS Angle 40 x 40 x 4 mm for frame, MS Angle 30 x 30 x 3 mm for cover, MS Flat 25 x 5 mm for fixing of sliding door bolt and MS Sheet 3.15mm thick for protection of manhole covers of storage tanks including the cost of cutting and welding of MS angle, MS Flat & MS Sheet, embedding in RCC Slab by drilling holes in MS angle & in RCC slab, provision for providing and fixing sliding door bolt 300 x 16 mm, MS Handle 100 mm, Lock and applying a coat of red oxide paint and painting two coat with steel paint (Firoza Blue) complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge. | 22 | Nos. | |
| 54 | 37 | Providing and fixing cast iron rungs 200 mm wide chequared or ribbed non slip surface including fixing in manhole with 200x200x100mm cement concrete 1:3:6(1cement:3sand:6 graded stone aggregate 20mm nominal size) in all respect. In all leads and lifts. | 20 | Nos | |
| 55 | 38 | Providing and Laying brick tiles over mumty roofs grouted with cement mortar 1 : 3 ( 1 Cement : 3 Sand) over a 12 mm layer of cement mortar 1 : 3 ( 1 Cement : 3 Sand) and finished neat with in all leads and lifts complete in all respect. | 34.49 | Sqm | |
| 56 | 39 | Providing and Fixing wire gauge shutters using galvanised M.S. Wire gauge of IS gauge specification 8 SG with wire of dia 0.56 mm for doors , windows i/c bright finished black enamelled iron butt hinges with necessary screws 30 mm thick of 2nd class deodar wood with in all leads and lifts complete in all respect. | 28.68 | Sqm | |
| 57 | 40 | Constructing coursed rubble hammer dressed "U" shape open surface drain with side wall 15 x 22 cm in cement mortar 1 : 6 (1 Cement : 6 Sand) and inside plastering with cement mortar 1 : 3 (1 Cement : 3 Sand) i/c earth work and laying 10 cm cement concrete in 1 : 5 : 10 (1 Cement : 5 Sand : 10 graded stone aggregate 40 mm nominal size) and finished with a floating coat of neat cement complete as per standard design with in all leads and lifts. | 68.3 | Rmt | |
| 58 | 41 | Providing and Fixing Aquamet / Itron / ABB Multi jet Class B, EMR Compatible water, Inferential type, Dry Dial Water Meter with end connectors in brass as per ISS 779 : 1994 and conforming to ISO-4064 class B having ready made holes, rubber gasket with saddle and supports and union including freight charges, connection charges complete in all respect and to the entire satisfaction of the Engineer -in- Charge. | 1 | No. | |
| 59 | 42 | Fixing of GI pipe (Medium class) for inlet,outlet and scour pipe including cutting and welding complete in all leads and lifts. | |||
| 60 | 42.01 | 150mm dia . | 36 | Rmt. | |
| 61 | 43 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete In all leads and lifts 110mm nominal bore. | 4 | Rmt | |
| 62 | 44 | Providing and fixing cast iron sluice valve double flanged PN-1 of leader/BHEL/Kirloskar/Gled/Kartar/Fourcess make including welding of companion flanges with pipe including nuts and bolts and gasket etc. The sluice valve conforming to IS -780. The dia of valve as mentioned below complete in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge. 150 mm dia. | 4 | Nos | |
| 63 | 45 | Providing and fixing automatic flushing cistern with a pair of CI or MS.bracket complete with fitting including CI Syphonic appratus mosquitos proof lid,CP brass unions and coupling for connecting with inlet, outlet and over flow pipes including cutting holes and making good the same. Over flow pipes to be measured and paid for separately (Viterous china 5 litres capacity) | 2 | Nos | |
| 64 | 46 | Providing and fixing vitreous china wash down water closet(Anglo indian,W/C.pan)with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1(1cement:1 sand) (Seat and cover to be measured and paid for separately)(white colour)in all leads and lifts. | 2 | Nos | |
| 65 | 47 | Providing and fixing 100mm size P or S trap for water closet(Squatting pan) including jointing the trap with the pan and soil pipe in cement mortar 1:1(1cement:1 sand) Sand Cast iron in all leads and lifts. | 2 | Nos | |
| 66 | 48 | Providing and fixing viterious china wash basin with single hole for pillar tap with CI or MS bracket painted white including cutting hole including good the same excluding fitting Cera sanitary work (Cornet) white 550x400 white in all leads and lifts. | 2 | Nos | |
| 67 | 49 | Providing and fixing viterious china pedestral for wash basin complete recessed at the basic for reception of pipe and fittings Cera sanitary work (Carnet) white (Viterious china in white colour) in all leads and lifts. | 2 | Nos | |
| 68 | 50 | Providing and fixing of PVC water storage tank of reputed make having capacity of 500 litres with necessary fittings including necessary inlet, outlet and scour connections and complete with float and hoisting complete in all respects. | 2 | Nos | |
| 69 | 51 | Providing and fixing on wall faces (D-plast) PVC door bend with oval access door, insertion rubber washer 3mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc complete 75mm dia in all leads and lifts. | 12 | Nos. | |
| 70 | 52 | Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less 4.5 Kg/Sqm including fitting the joints with approved adhesive complete with in all leads and lifts and carriage of materials, 110 mm nominal bore. | 20 | Rmt | |
| 71 | 53 | Providing and fixing to wall ceiling and floor galvanised mild steel tubes(Medium grade) tube fittings and clamp including making good the wall ceiling and floor in all leads and lifts) 15mm nominal bore in all leads and lifts. | 20 | Rmt | |
| 72 | 54 | Providing and fixing full way wheel valve of following dia gun metal in all leads and lifts. | |||
| 73 | 54.01 | 15mm dia | 2 | Nos | |
| 74 | 55 | Providing and fixing cast iron spun soil waste and ventilating pipe lead caulked joint to be measured and paid for separately 100mm dia with C.I cowl 100 mm dia nominal size in all leads and lifts. | 2 | Nos. | |
| 75 | 56 | Providing and fixing brass bib tap(Superior quality or heavy type) 15 mm dia in all leads and lifts. | 2 | Nos | |
| 76 | 57 | Providing and fixing CP brass soap dish with CP.brass bracket fixed to wooden cleats with CP.brass screws.chrome plate in all leads and lifts. | 2 | No | |
| 77 | 58 | Electrical installation:- Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. | |||
| 78 | 58.01 | Group C. | 46 | Nos. | |
| 79 | 59 | Wiring for circuit / sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. | |||
| 80 | 59.01 | 2 x 1.5 Sq. mm. | 96 | Meter | |
| 81 | 59.02 | 2 x 4.00 Sq. mm. | 48 | Meter | |
| 82 | 60 | Supplying and fixing 3 pin 5/6 amps. Socket outlet on the exists switch box/covers including connections etc. as required. | 16 | Nos. | |
| 83 | 61 | Supplying and fixing 2 way 5/6 amps. Tumbler/piano type switch on the existing switch box on the switch box/cover including connections etc. as required. | 16 | Nos. | |
| 84 | 62 | Supplying and fixing 3 pin 15/16 amps. Socket outlet on the exists switch box/covers including connections etc. as required. | 6 | Nos. | |
| 85 | 63 | Supplying and fixing 15/16 amps. Tumbler/piano type switch on the existing switch box on the switch box/cover including connections etc. as required. | 6 | Nos. | |
| 86 | 64 | Supplying and fixing wooden box of following size (nominal) on surface or recess with suitable size of phenolic laminated sheet cover of in front as required. | |||
| 87 | 64.01 | 229 mm.x 102 mm.x 60 mm. deep | 6 | Nos. | |
| 88 | 64.02 | 203 mm.x152 mm.x 60 mm. deep | 6 | Nos. | |
| 89 | 65 | Supplying and fixing ceiling rose on existing junction box/ wooden block including connections etc. as required. | 16 | Nos. | |
| 90 | 66 | Supplying and fixing plain pandent with 16/20 mm twin twisted, flexible PVC insulated copper cable and backelite pendant holder including connections, etc. as required. | 6 | Nos. | |
| 91 | 67 | Supplying and Fixing 5 Amps to 32 Amps rating, 240 Volts, L- series miniature circuit breaker of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required Cat - A. (Single Pole) | 14 | Nos. | |
| 92 | 68 | Supplying and Fixing of following way, single pole and neutral, sheet steel, MCB distribution board, 240 Volts on surface/ recess, complete with tinned copper busbar, neutral link, earthbar, dinnbar, detachable gland plates, inter connections, i/c painting, earthing etc. as required busbar 8 way. | 2 | Nos. | |
| 93 | 69 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (63 amp. CAT - A) | 2 | Nos. | |
| 94 | 70 | Providing, installing, testing and commissioning of ceiling fan and regulator i/c wiring the down rod of standard length (upto 30 Cm with 1.5 Sqmm PVC insulated copper conductor single core cable etc. as required.Ceiling fan 1400 mm sweep category A | 4 | Nos. | |
| 95 | 71 | Providing and fixing ultra slim decorative extruded box fixture with domestic electronic ballast, snap-on installers, suitable for 28 watt FTL (T5), complete with all accessories (including one No. T-5 Tube), connections, testing and commissioning etc. as required. | |||
| 96 | 71.01 | 1 x28 watt-FTL(T5) (Category-A) | 6 | Nos. | |
| 97 | 72 | Providing and fixing two core service wire with 6 sqmm thick in all leads and lifts. | 60 | Metre | |
| 98 | 73 | Providing and Supplying CFL 1 x 23 watt of reputed make in all leads and lifts. | 4 | Nos. | |
| 99 | 74 | Providing and Supplying CFL 1 x 5 watt of reputed make in all leads and lifts. | 2 | Nos. | |
| 100 | 75 | Providing and Fixing LED Flood Light of 20 watt (OREVA make) complete in all respect in all leads and l;ifts. | 4 | Nos. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
