Supply Of Furniture At Food Testing Laboratory Rudrapur ( Infrastructure Development For High And Equipment Under Softel Project Fssai ) , Rudrapur-Uttarakhand

Supply Of Furniture At Food Testing Laboratory Rudrapur ( Infrastructure Development For High And Equipment Under Softel Project Fssai ) - 1 Floor Based Welded Cabinet With Metal Skirting Welded Cabinet Body Should Be Flush Face Construction With Intersection Of Vertical And Horizontal Members Like Lh And Rh Side Panel Along With Front Horizontal Channel, Back Panel And Bottom Panel. It Should Be Relocated Anywhere Easily As It Is An Independent Unit. Cabinet Should Of Square Non-Sharp Edge Construction. Ndoors Should Be Assembled With Ss-304 Hinge Assembly. Removable Back Panel Should Be Provided To Easily Access The Service Lines Running Behind The Cabinet Benches. Intermediate Horizontal Channels Should Be Provided Between Door And Drawer.Toe-Space Of 90Mm X 90Mm Is Provided At Front-Bottom Side Of Cabinet. Levelers Are Provided For Easy Leveling Of Welded Cabinet. Nshelf Should Be Eight-Bend Panel With 20Mm Height. Drawer Tray Should Be Of Single Piece Construction. Drawer Should Be Well Supported On Lh And Rh Ball Slide Suspension System. Steel Door And Drawer Front Should Be Of Double Wall Construction With Sound Dampenening Material Filled Inside. Doors Should Be Easily Removable And Hinges Should Be Easily Replaceable. Knee Space Panel Should Be In 22 Gauge Construction Dimensions: W=300 / 450 / 580 / 600 / 750 / 900 Mm, D = 530Mm, H = 875 / 725 Mm Configurations: 1 Shutter + 1 Drawer / 4 Drawers / Leg Spaces / 1 Shutter / 2 Shutters / 3 Drawers / 2 Shutters + 1 Drawer / Sink Unit + 2 Shutters Moc: Mscrca: Is – 513 ( 1994 ) Nthickness: Lh / Rh Side Panels, Shutter Front, Bottom Panel, Top Front, Drawer Separator, Shelf, Alignment Channel Is Of 1.2Mm Thk. O Removable Back Panel, Shutter Cover, Fr. Rack Strip, Top Cover Panel Is Of 0.8Mmthk Finish: Powder Coating Pure Epoxy, Thickness 40-50 Microns Handle: Anodized Aluminum Recessed-Type, Ctc: 160.0Mm Lock: Units Have A Locking Facility With 180° And 10 Lever Cam Lock Mechanism ( Except For Sink And Corner Unit ) Hinge: Ss Hinge Screw: Ss 304 Nshutter Should Be Of Twin-Type Construction With Sound Dampening Effect Using Profill. Shutter Cover Should Be Equipped With Bump On For Sound Dampening. Base Moulding Should Be Made Of Pvc With Corner Clips. Ball Slide: 500Mm Length ( Godrej-Make ) ( Required Only For Drawer Unit ) . Shutter Should Have Provision Of Roller Catch Nwf-C-900-1S-Lh-875H 2 Wf-C-Su-900-1S-Lh-875H 3 Wf-1S-1D-Lh-450W-875H 4 Wf-Su-2S-750W-875H 5 Wf-2S-1D-600W-875H 6 Wf-2S-1D-750W-875H 7 Wf-Cls-P-580W-875H 8 Wf-Mls-P-600W-875H 9 Panels: All Side Cover Panels And Back Panels, Filler Panels Should Be Made From Crca Ms Panels Of 1.0Mm Thickness With Pure Epoxy Powder Coating Filler Panel For Wall Side Furniture Without Upright 770 Wd X 875H 10 Filler Panel For Wall Side Furniture With Upright 770 Wd X 875H 11 Back Support Bracket With Upright For 770 Working Depth 12 Back Support Bracket Without Upright For 770 Working Depth 13 Accessories Pp Drop-In Sink Model S 06 560 Mm ( W ) X 355 Mm ( D ) 14 Anti-Siphon Bottle Trap Model : S 04 Make: Premier 15 Flexible / F Serated Connector Model : Hp 01 Make: Premier 16 Single Tap Deck Mounted, 8 Swing Gooseneck, Without Positioning Pins Model No.100 / 33 17 Single Valve, Turret, 1-Hole, Fix.Nozzle, Press-Lpg Model No:25320881012-14 18 Single Valve, Turret, 1-Hole, Fix.Nozzle, G1 / 2 Compressed Air Model No:25320011021-14 19 Providing And Supply Of Electrical Trunking : Used For Housing Electrical Switches And Sockets, Data And Voice Points, Its Top Panel, Bottom Panel Of The Trunking Shall Be Made From 1.0 Mm Thick Crca Ms Panel. It Shall Be Available In Both, Single Sided And Double Sided Configurations. It Shall Be Made From Crca Ms With Pure Epoxy Powder Coating. The Front Surface That Houses The Electrical Points Should Have A Slope. 1200 Module Length Single Side Electrical Trunking - Cutouts: 6 Module + 6 Module + 6 Module 20 1350 Module Length Single Side Electrical Trunking - Cutouts: 6 Module + 6 Module + 6 Module 21 1500 Module Length Single Side Electrical Trunking - Cutouts: 6 Module + 6 Module + 6 Module 22 600 Module Length Single Side Electrical Trunking - Cutouts: 6 Module + 6 Module 23 Outer Cover For Single-Sided Electrical Trunking 24 Fixed Type Reagent Shelf ( Main Type ) 600 L- Cutout : 6 Module + 6 Module ( Total 2 Cutouts Only ) 25 Providing And Supply Of Adjustable Reagent Shelves : Depending Upon Boq Requirement, Height Adjustable Shelves Shall Be Provided Between Uprights With 1” Of Height Adjustability. Complete Modular Design Consisting Of 2 Stage Horizontal Storage Shelves. The Ends And Intermediate Vertical Supports Shall Be 2Mm Thick Aluminum Extrusion With Ms Brackets Of 2 Mm Thick. Toughened Glass Shall Be Put-On Over These Shelves For Taking Care Of Bottle Marks / Corrosion 1200 Module Length Glass Reagent Shelf For Wall 26 600 Module Length Glass Reagent Shelf For Wall 27 Providing And Supply Of Master Upright : Master Upright Shall Be Of The Dimensions: 300 X 150 X 1.2 Mm. It Shall Be Made From 1.2Mm Thick Crca Ms With Pure Epoxy Powder Coating. It Should Have An Open-Able Door For Easy Service Maintenance And Should Extend Till The False Ceiling. 2100 Ht.Wall Side Plain Upright & Cover With Cutout 28 2100 Ht.Wall Side Upright With Cutout & Plain Cover ( Without Cutout ) 29 Providing And Supply Of Electrical Boom : Horizontal Service Boom Shall Be Made Out Of 18 Gauge Crca Steel Panels And Should Span The Length Between Uprights And Shall Be Provided With Removable Service Panels. Electrical And Gds Supplies Shall Be Supplied Through This Horizontal Service Boom. Boom Shall Be Supplied With Factory Fitted Combinations Of Switch & Sockets With 15Amps Standard Grade. 1200 Module Length Wall Electrical Boom - Cutout : 6 Module + 6 Module 30 600 Module Length Wall Electrical Boom - Cutout : 6 Module 31 Providing And Supply Of Balance Table : The Table Consists Of Following Parts: Ntubular Frame - Completely Modular Type Tubular Frame, Which Carries The Load Of Kadappa And Granite, Kept On It. High-Tension Pan Head M6 Zinc Black-Coated Screws ( For Better Corrosion Resistance ) Are Used For The Fastening. The Material Used Is: 40Sq X 1.6 Mm Thick Erw Tube And The Overall Load Carrying Capacity Of Tubular Frame Is 250 Kgs Of Uniform Distributed Load. Ncover Panels – They Are 0.8 Mm Thick Crca Ms Sheet And Pre-Treated And Epoxy Powder Coated For Better Corrosion Resistance. The Thickness Of Powder Coat Is 45-50 Microns Which Passes The Test Of Salt Spray For 1000 Hours And Having The Scratch Hardness Of 3 Kgs. Nkadappa - 25Mm Thick Kadappa Acts As The Shock-Dampening Component. Nwork Surface – Granite Nvibration Isolating Rubber Pads - The Objective Of Using These Rubber Pads Is To Absorb The Pulsating Vibrations Coming From The Floor .The Pads Are Made Up From Combination Of Nitrite Rubber, Cork Particles And Cross Linked Polyester Fiber. This High-Grade Compound Material Possesses All The Physical And Mechanical Properties Required To Minimize The Dampening Effect. Nlevelling Screws - The Tubular Frame Has The Provision For 4 Height Adjusters Or Levelling Screws That Take Care Of All Levelling Aspects. Nsize: ( Width: 600 / 900Mm, Depth: 600Mm, Height: 750 / 900Mm ) 900 X 600 X 900Mm Anti Vibration Table 32 Avt 2 : Granite Slab 33 Providing And Supply Of Eye Wash & Emergency Shower With Eye Wash : General - Provide Emergency Eye, Eye / Face Wash, Safety Stations And Drench Hose Units With Spray-Type Outlet Heads To Deliver A Soft, Wide, High Volume Spray Of Water. Outlet Heads Should Have An Internal Self-Regulating Flow Control, A Reticulated Polyurethane Filter, A Threaded Spray Cover And A Hinged Swing-Away Dust Cover. Hinged Cover Shall Be Permanently Attached To Outlet Head Body With A Stainless Steel Pin. All Wearing Components Shall Be Located Inside Spray Head For Ease Of Service. All Emergency Eye Wash And Shower Equipment Shall Be Third-Party Certified To Comply With Ansi Z358.1-2009. Ndeck-Mounted Eye-Wash - Deck Mounted Drench Hose Units Should Have A Single Outlet Head With A Rubber Protective Collar And Should Deliver An Aerated Flow Of Water. The Valve Shall Be Forged Brass Self-Closing Type With A Stainless Steel Squeeze Handle. Units Shall Be Furnished With A Deck Flange And An 8 Ft. Reinforced Pvc Hose Nfloor Based Pvc Emergency Shower Cum Eye-Wash – Corrosion Resistant, Combination Eye Wash / Shower Safety Station With Abs Plastic Shower Head, Abs Plastic Bowl, Cast Aluminum Powder Coated Flag Handle, Pvc Floor Flange, 2” Ips Schedule 80 Pvc Pipe And Fittings, 1” Ips And ½” Ips U.S. Made Pvc Coated Brass Stay Open Ball Valves, And Polished Stainless Steel Pull Rod. Unit Shall Have ( 2 ) Polypropylene Spray Heads With Integral Dust Covers, Filters, And 1.8-Gpm Flow Control Orifices Mounted On A Pvc Coated Brass Head Assembly. Unit Shall Include Ansi Compliant Sign. Hand-Held Eye Shower Model No: 27110091008011 34 Providing And Supply Of Eye Wash & Emergency Shower With Eye Wash : General - Provide Emergency Eye, Eye / Face Wash, Safety Stations And Drench Hose Units With Spray-Type Outlet Heads To Deliver A Soft, Wide, High Volume Spray Of Water. Outlet Heads Should Have An Internal Self-Regulating Flow Control, A Reticulated Polyurethane Filter, A Threaded Spray Cover And A Hinged Swing-Away Dust Cover. Hinged Cover Shall Be Permanently Attached To Outlet Head Body With A Stainless Steel Pin. All Wearing Components Shall Be Located Inside Spray Head For Ease Of Service. All Emergency Eye Wash And Shower Equipment Shall Be Third-Party Certified To Comply With Ansi Z358.1-2009. Ndeck-Mounted Eye-Wash - Deck Mounted Drench Hose Units Should Have A Single Outlet Head With A Rubber Protective Collar And Should Deliver An Aerated Flow Of Water. The Valve Shall Be Forged Brass Self-Closing Type With A Stainless Steel Squeeze Handle. Units Shall Be Furnished With A Deck Flange And An 8 Ft. Reinforced Pvc Hose Nfloor Based Pvc Emergency Shower Cum Eye-Wash – Corrosion Resistant, Combination Eye Wash / Shower Safety Station With Abs Plastic Shower Head, Abs Plastic Bowl, Cast Aluminum Powder Coated Flag Handle, Pvc Floor Flange, 2” Ips Schedule 80 Pvc Pipe And Fittings, 1” Ips And ½” Ips U.S. Made Pvc Coated Brass Stay Open Ball Valves, And Polished Stainless Steel Pull Rod. Unit Shall Have ( 2 ) Polypropylene Spray Heads With Integral Dust Covers, Filters, And 1.8-Gpm Flow Control Orifices Mounted On A Pvc Coated Brass Head Assembly. Unit Shall Include Ansi Compliant Sign. Ss Emergency Safety Shower With Eye / Face Wash Complete Ss Construction 35 Ss 304 Cross Over Bench, Size ; 24H X 18D X 56L, 36 Providing And Supply Of Granite Work Top : It Shall Be 19Mm ( + / - 2Mm ) Thick Jet Black Granite Worktop. The Exposed Edges Of The Worktop Shall Be Chamfered And Smoothened. The Bottom Of The Worktop Shall Be Polished And There Shall Be A V-Groove Throughout The Length Of The Exposed Edges To Protect The Cabinets From Coming In Contact With The Spillages. The Overhang On The Storage Cabinet Is 25 Mm At The Front Side And 30 Mm At The Sides. The Backing Material Used Is A Neoprene Mat Of 6 Mm Thickness. Jet Black Granite ( Sq.Mt. ) 20 ( ±2 ) Mm Thk 37 Neoprene Strip ( Running Meter ) ( 30Mm Wide & 6 Mm Thick ) 38 Sr-998 Glue For Neoprene Mat. ( Litres ) 39 Silicon Sealant - Black 40 Masking Tape 41 5 Feet Benchtop Abp Aeolus Fume Hood Nwithout Any Accessories 42 Apparatus Grid For 5 Feet Benchtop Aeolus Fumehood ( Epoxy ) 43 Ceiling Front Cover Panel For 5 Feet Aeolus Fumehood 44 Ceiling Lh / Rh Side Cover Panel For Aeolus Fumehood 45 Compressed Air ( Flexible Tubing Service Valves For Benchtop Aeolus Fumehood ) ( Rhs ) 46 Eco Panel ( 0.75 To 1 Hp ) With Tl / Bl For Aeolus Fumehood 47 3 Module Plate With Socket & Tiny Trip For Aeolus Fume Hood: 4 No. 48 Fixed Type Apparatus Storage Cabinet For Bench Top Enhanced Fume Hood ( 750 Width ) 49 Led Light For 4 To 6 Ft Aeolus Fumehood: 2 No 50 Nitrogen ( Flexible Tubing Service Valves For Benchtop Aeolus Fumehood ) 51 Raw Water ( Flexible Tubing Service Valves For Benchtop Aeolus Fumehood ) 52 Rear Support Panel Offixed Type Apparatus Storage Cabinet For Benchtop Aeolus Fumehood 53 Providing And Supply Of Electrical Accessories 16A, 1 Way Switch Model No: M0130 54 6 Module Plate - Model No: Cs956m-S 55 6 / 16A, 6 Pin Shutter Socket - Model No: M1332 56 Revolving Stool

INR 2950 /-

INR 96000.0 /-

INR 32 Lakhs /-

Name of Work: STRENGTHING OF FOOD TESTING LABORATORY AT RUDRAPUR (INFRASTRUCTURE DEVELOPMENT FOR HIGH AND EQUIPMENT UNDER SOFTEL PROJECT OF FSSAI. (FOR FURNITURE)
	Sl. No.	Item Description	Item Code / Make	Quantity	Units
1	1.1	FLOOR BASED WELDED CABINET WITH METAL SKIRTING Welded cabinet body should be flush face construction with intersection of vertical and horizontal members like LH and RH side panel along with front horizontal channel, back panel and bottom panel. It should be relocated anywhere easily as it is an independent unit. Cabinet should of square non-sharp edge construction. \nDoors should be assembled with SS-304 hinge assembly. Removable back panel should be provided to easily access the service lines running behind the cabinet benches. Intermediate horizontal channels should be provided between door and drawer.Toe-space of 90mm X 90mm is provided at front-bottom side of cabinet. Levelers are provided for easy leveling of welded cabinet. \nShelf should be eight-bend panel with 20mm height. Drawer tray should be of single piece construction. Drawer should be well supported on LH and RH ball slide suspension system. Steel door and drawer front should be of double wall construction with sound dampenening material filled inside. Doors should be easily removable and hinges should be easily replaceable. Knee space panel should be in 22 gauge construction Dimensions: W=300/450/580/600/750/900 mm, D = 530mm, H = 875/725 mm Configurations: 1 Shutter + 1 Drawer/4 Drawers/Leg Spaces/1 Shutter/2 Shutters/3 Drawers/2 Shutters + 1 Drawer/Sink Unit + 2 Shutters MOC: MSCRCA: IS – 513 (1994)\nThickness: LH/RH side panels, shutter front, Bottom panel, Top front, Drawer separator, shelf, Alignment channel is of 1.2mm thk. o Removable Back panel, Shutter cover, Fr. Rack strip, Top cover panel is of 0.8mmthk Finish: Powder coating pure epoxy, thickness 40-50 microns Handle: Anodized Aluminum Recessed-Type, CTC: 160.0mm Lock: Units have a locking facility with 180° and 10 lever cam lock mechanism (except for sink and corner unit) Hinge: SS Hinge Screw: SS 304\nShutter should be of twin-type construction with sound dampening effect using profill. Shutter cover should be equipped with Bump on for sound dampening. Base Moulding should be made of PVC with corner clips. Ball Slide: 500mm Length (Godrej-Make) (required only for drawer unit). Shutter should have provision of roller catch \nWF-C-900-1S-LH-875H	-	1	Nos.
2	1.2	WF-C-SU-900-1S-LH-875H	-	4	Nos.
3	1.3	WF-1S-1D-LH-450W-875H	-	1	Nos.
4	1.4	WF-SU-2S-750W-875H	-	1	Nos.
5	1.5	WF-2S-1D-600W-875H	-	20	Nos.
6	1.6	WF-2S-1D-750W-875H	-	5	Nos.
7	1.7	WF-CLS-P-580W-875H	-	3	Nos.
8	1.8	WF-MLS-P-600W-875H	-	14	Nos.
9	2.1	Panels: All side cover panels and back panels, filler panels should be made from CRCA MS panels of 1.0mm thickness with pure epoxy powder coating Filler Panel For Wall Side Furniture Without Upright 770 Wd X 875H	-	19	Nos.
10	2.2	Filler Panel For Wall Side Furniture With Upright 770 Wd X 875H	-	3	Nos.
11	2.3	Back Support Bracket With Upright For 770 Working Depth	-	6	Nos.
12	2.4	Back Support Bracket Without Upright For 770 Working Depth	-	60	Nos.
13	3.1	Accessories Pp Drop-In Sink Model S 06 560 Mm (W) X 355 Mm (D)	-	5	Nos.
14	3.2	Anti-Siphon Bottle Trap Model : S 04 Make: Premier	-	5	Nos.
15	3.3	Flexible/F Serated Connector Model : Hp 01 Make: Premier	-	5	Nos.
16	3.4	Single Tap Deck Mounted, 8" Swing Gooseneck, Without Positioning Pins Model No.100/33	-	5	Nos.
17	3.5	Single Valve,Turret,1-Hole,Fix.Nozzle, Press-LPG Model no:25320881012-14	-	6	Nos.
18	3.6	Single Valve,Turret,1-Hole,Fix.Nozzle,G1/2" Compressed Air Model no:25320011021-14	-	4	Nos.
19	4.1	Providing and supply of Electrical Trunking : Used for housing electrical switches and sockets, data and voice points, its top panel, bottom panel of the trunking shall be made from 1.0 mm thick CRCA MS panel. It shall be available in both, single sided and double sided configurations. It shall be made from CRCA MS with pure epoxy powder coating. The front surface that houses the electrical points should have a slope. 1200 Module Length Single Side Electrical Trunking - Cutouts: 6 Module + 6 Module + 6 Module	-	5	Nos.
20	4.2	1350 Module Length Single Side Electrical Trunking - Cutouts: 6 Module + 6 Module + 6 Module	-	2	Nos.
21	4.3	1500 Module Length Single Side Electrical Trunking - Cutouts: 6 Module + 6 Module + 6 Module	-	3	Nos.
22	4.4	600 Module Length Single Side Electrical Trunking - Cutouts: 6 Module + 6 Module	-	7	Nos.
23	4.5	Outer Cover For Single-Sided Electrical Trunking	-	20	Nos.
24	4.6	Fixed type reagent shelf (Main type) 600 L- Cutout : 6 Module + 6 Module (Total 2 cutouts only)	-	1	Nos.
25	5.1	Providing and supply of Adjustable Reagent Shelves : Depending upon BOQ requirement, height adjustable shelves shall be provided between uprights with 1” of height adjustability. Complete modular design consisting of 2 stage horizontal storage shelves. The ends and intermediate vertical supports shall be 2mm thick aluminum extrusion with MS brackets of 2 mm thick. Toughened glass shall be put-on over these shelves for taking care of bottle marks/corrosion 1200 module length Glass Reagent Shelf for Wall	-	6	Nos.
26	5.2	600 Module Length Glass Reagent Shelf For Wall	-	3	Nos.
27	6.1	Providing and supply of Master Upright : Master Upright shall be of the dimensions: 300 x 150 x 1.2 mm. It shall be made from 1.2mm thick CRCA MS with pure epoxy powder coating. It should have an open-able door for easy service maintenance and should extend till the false ceiling. 2100 Ht.Wall Side Plain Upright & Cover With Cutout	-	3	Nos.
28	6.2	2100 Ht.Wall Side Upright With Cutout & Plain Cover (Without Cutout)	-	3	Nos.
29	7.1	Providing and supply of Electrical Boom : Horizontal service boom shall be made out of 18 gauge CRCA steel panels and should span the length between uprights and shall be provided with removable service panels. Electrical and GDS supplies shall be supplied through this horizontal service boom. Boom shall be supplied with factory fitted combinations of switch & sockets with 15amps standard grade. 1200 Module Length Wall Electrical Boom - Cutout : 6 Module + 6 Module	-	1	Nos.
30	7.2	600 Module Length Wall Electrical Boom - Cutout : 6 Module	-	1	Nos.
31	8.1	Providing and supply of Balance Table : The table consists of following parts:\nTubular frame - Completely modular type tubular frame, which carries the load of kadappa and granite, kept on it. High-tension Pan head M6 Zinc black-coated screws (for better corrosion resistance) are used for the fastening. The material used is: 40Sq x 1.6 mm thick ERW tube and the overall load carrying capacity of tubular frame is 250 kgs of uniform distributed load. \nCover Panels – They are 0.8 mm thick CRCA MS sheet and pre-treated and epoxy powder coated for better corrosion resistance. The thickness of powder coat is 45-50 microns which passes the test of Salt Spray for 1000 Hours and having the Scratch Hardness of 3 Kgs. \nKadappa - 25mm thick Kadappa acts as the shock-dampening component. \nWork Surface – granite \nVibration Isolating Rubber pads - The objective of using these rubber pads is to absorb the pulsating vibrations coming from the floor .The pads are made up from combination of nitrite rubber, cork particles and cross linked polyester fiber. This high-grade compound material possesses all the physical and mechanical properties required to minimize the dampening effect. \nLevelling screws - The Tubular frame has the provision for 4 height adjusters or Levelling Screws that take care of all levelling aspects.\nSize: (Width: 600/900mm, Depth: 600mm, Height: 750/900mm) 900 X 600 X 900Mm Anti Vibration Table	-	11	Nos.
32	8.2	AVT 2 : GRANITE SLAB	-	11	Nos.
33	9.1	Providing and supply of Eye Wash & Emergency Shower with Eye Wash : GENERAL - Provide emergency eye, eye/face wash, safety stations and drench hose units with spray-type outlet heads to deliver a soft, wide, high volume spray of water. Outlet heads should have an internal self-regulating flow control, a reticulated polyurethane filter, a threaded spray cover and a hinged swing-away dust cover. Hinged cover shall be permanently attached to outlet head body with a stainless steel pin. All wearing components shall be located inside spray head for ease of service. All emergency eye wash and shower equipment shall be third-party certified to comply with ANSI Z358.1-2009.\nDECK-MOUNTED EYE-WASH - Deck mounted drench hose units should have a single outlet head with a rubber protective collar and should deliver an aerated flow of water. The valve shall be forged brass self-closing type with a stainless steel squeeze handle. Units shall be furnished with a deck flange and an 8 ft. reinforced PVC hose\nFLOOR BASED PVC EMERGENCY SHOWER CUM EYE-WASH – Corrosion resistant, combination eye wash/shower safety station with ABS plastic shower head, ABS plastic bowl, cast aluminum powder coated flag handle, PVC floor flange, 2” IPS Schedule 80 PVC pipe and fittings, 1” IPS and ½” IPS U.S. made PVC coated brass stay open ball valves, and polished stainless steel pull rod. Unit shall have (2) polypropylene spray heads with integral dust covers, filters, and 1.8-GPM flow control orifices mounted on a PVC coated brass head assembly. Unit shall include ANSI compliant sign. Hand-held Eye Shower Model no: 27110091008011	-	5	Nos.
34	10.1	Providing and supply of Eye Wash & Emergency Shower with Eye Wash : GENERAL - Provide emergency eye, eye/face wash, safety stations and drench hose units with spray-type outlet heads to deliver a soft, wide, high volume spray of water. Outlet heads should have an internal self-regulating flow control, a reticulated polyurethane filter, a threaded spray cover and a hinged swing-away dust cover. Hinged cover shall be permanently attached to outlet head body with a stainless steel pin. All wearing components shall be located inside spray head for ease of service. All emergency eye wash and shower equipment shall be third-party certified to comply with ANSI Z358.1-2009.\nDECK-MOUNTED EYE-WASH - Deck mounted drench hose units should have a single outlet head with a rubber protective collar and should deliver an aerated flow of water. The valve shall be forged brass self-closing type with a stainless steel squeeze handle. Units shall be furnished with a deck flange and an 8 ft. reinforced PVC hose\nFLOOR BASED PVC EMERGENCY SHOWER CUM EYE-WASH – Corrosion resistant, combination eye wash/shower safety station with ABS plastic shower head, ABS plastic bowl, cast aluminum powder coated flag handle, PVC floor flange, 2” IPS Schedule 80 PVC pipe and fittings, 1” IPS and ½” IPS U.S. made PVC coated brass stay open ball valves, and polished stainless steel pull rod. Unit shall have (2) polypropylene spray heads with integral dust covers, filters, and 1.8-GPM flow control orifices mounted on a PVC coated brass head assembly. Unit shall include ANSI compliant sign. Ss Emergency Safety Shower With Eye / Face Wash Complete Ss Construction	-	1	Nos.
35	11.1	SS 304 CROSS OVER BENCH, SIZE ; 24H x 18D x 56L,	-	1	Nos.
36	12.1	Providing and supply of Granite Work Top : It shall be 19mm (+/- 2mm) thick Jet Black Granite worktop. The exposed edges of the worktop shall be chamfered and smoothened. The bottom of the worktop shall be polished and there shall be a V-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. The overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. The backing material used is a neoprene mat of 6 mm thickness. Jet Black Granite (Sq.Mt.) 20 (±2) Mm Thk	-	29.5	Sq.Mtrs.
37	12.2	Neoprene Strip (Running Meter) (30Mm Wide & 6 Mm Thick)	-	160	R.Mtrs.
38	12.3	Sr-998 Glue For Neoprene Mat. (Litres)	-	7	R.Mtrs.
39	12.4	Silicon Sealant - Black	-	7	Nos.
40	12.5	Masking Tape	-	7	R.Mtrs.
41	13.1	5 FEET BENCHTOP ABP AEOLUS FUME HOOD\nWITHOUT ANY ACCESSORIES	-	2	Nos.
42	13.2	Apparatus Grid For 5 Feet Benchtop Aeolus Fumehood (Epoxy)	-	2	Nos.
43	13.3	Ceiling Front Cover Panel For 5 Feet Aeolus Fumehood	-	2	Nos.
44	13.4	Ceiling LH/ RH Side Cover Panel For Aeolus Fumehood	-	2	Nos.
45	13.5	Compressed Air (Flexible Tubing Service Valves For Benchtop Aeolus Fumehood)(RHS)	-	2	Nos.
46	13.6	Eco Panel (0.75 To 1 Hp) With Tl/ Bl For Aeolus Fumehood	-	2	Nos.
47	13.7	3 Module Plate With Socket & Tiny Trip For Aeolus Fume Hood: 4 No.	-	4	Nos.
48	13.8	FIXED TYPE APPARATUS STORAGE CABINET FOR BENCH TOP ENHANCED FUME HOOD (750 WIDTH)	-	4	Nos.
49	13.9	LED LIGHT FOR 4 TO 6 FT AEOLUS FUMEHOOD: 2 No	-	2	Nos.
50	14.1	Nitrogen (Flexible Tubing Service Valves For Benchtop Aeolus Fumehood)	-	2	Nos.
51	14.2	Raw Water (Flexible Tubing Service Valves For Benchtop Aeolus Fumehood)	-	2	Nos.
52	14.3	Rear Support Panel Offixed Type Apparatus Storage Cabinet For Benchtop Aeolus Fumehood	-	2	Nos.
53	15.1	Providing and supply of Electrical accessories 16A, 1 Way Switch Model No: M0130	-	106	Nos.
54	15.2	6 Module Plate - Model No: Cs956M-S	-	53	Nos.
55	15.3	6/16A, 6 Pin Shutter Socket - Model No: M1332	-	106	Nos.
56	16.1	Revolving Stool	-	1	Nos.