| 1 | SPOT VALUATION | 501 & 504 | 3.40 | 1 cum | 4961.70 | 16870.00 |
| Brick Masonry in superstructure with CM (1:8) prop: using second class bricks from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, scaffolding charges, lift charges, curing, etc., complete but excluding seigniorage charges for finished item of work. (APSS No. 501 & 504) |
| 2 | SPOT VALUATION | 309 & 310 | 3.11 | 1 sqm | 247.95 | 771.00 |
| Filling with Gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyence of water to the work site and all operational, incidental, labour charges, hire charges of T & P etc., completebut but excluding seignorage charges, for finished item of work. (APSS NO. 309 & 310) |
| 3 | SPOT VALUATION | 402.0 | 0.79 | 1 cum | 3287.95 | 2597.00 |
| Plain Cement Concrete corresponding to M5 grade as per IS 456 equivalent to (1:5:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50,40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete but excluding seigniorage chargesfor finished item of work for Foundations and Flooring Bed (APSS No. 402) |
| 4 | SPOT VALUATION | 402.0 | 0.37 | 1 cum | 5607.25 | 2075.00 |
| Plain Cement Concrete corresponding to M15 grade as per IS 456 equivalent to (1:2:4) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size Hard Blasted Granite (IS383, 1970) Machine Crushed graded metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials, all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete but excluding seigniorage charges for finished item of work (APSS No. 402) |
| 5 | SPOT VALUATION | As Directed by Engineer-in-charge | 1.00 | 1 each | 3455.10 | 3455.00 |
| Supplying and fixing of 18 gauge MS plain Sheet door with frame of \ T \ angular section of 40 X 40 X 6mm with bottom 12mm square rod connecting the two vertical of the frame and inner frame of Double leaf shutter with MS \ L \ angular of 35 X 35 X 4mm and welded with 2 nos of 25 X 25 X 3mm angle and 1 no 30 X 4mm Flat fot each leaf and welded with 6 Nos of 125mm (5\") long MS powder coated hinges, 1 No of 12\" long MS powder coated Aldrop, 2Nos of 8\" MS powder coated tower bolts, and 6 Nos of 9\" hold fasts of 40 X 40 X 6mm, and 2 nos of 5\" MS powder coated Handles, 2 Nos of Door stoppers including Red oxide paint including sales and other taxes on cost of all materials including cost and conveyance of all materials to site etc., complete for finished item of work. (Door size 0.85 X 1.80) |
| 6 | SPOT VALUATION | As directed by Engineer-in-charge | 24.50 | 1 Rmt | 295.00 | 7228.00 |
| Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of work |
| 7 | SPOT VALUATION | As directed by Engineer-in-charge | 6.66 | 1 sqm | 2142.00 | 14266.00 |
| Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ?C? channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 10mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ?C? Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer?s specification & drawing for finished item of work . |
| 8 | SPOT VALUATION | As Directed by Engineer-in-charge | 3.00 | 1 each | 1534.00 | 4602.00 |
| Supply and fixing of European Water Closet of 1st quality conforming to IS: 2556-Part-2-1973 of Hindustan/Neycer of Parryware make white glazed with \P\ trap. |
| 9 | SPOT VALUATION | As Directed by Engineer-in-charge | 3.00 | 1 each | 734.00 | 2202.00 |
| Supply and fixing best indian make plastic seat and lid for European water closets with rubber or plastic buffers as per IS 2548 -1996 |
| 10 | SPOT VALUATION | As Directed by Engineer-in-charge | 1.00 | 1 each | 1577.00 | 1577.00 |
| Supplying and fixing 580 mm x 440 mm long Orissa pan white glazed Water Closet 1st qualityISI marked confirming to IS:2556-Part-3-1981 with \"P\" or \"S\" trap Hindware / Parryware / Neycer with brick masonry seat, CC squatting plate and fixing 12.70mm dia NP Push cock 1st quality , P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges and seigniorage charges etc., complete for finished item of work. |
| 11 | SPOT VALUATION | As Directed by Engineer-in-charge | 2.00 | 1 each | 2378.00 | 4756.00 |
| Supplying and fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Esso or equivalent complete with standard CI brackets including wooden block ,1 No.12.70mm PVC connection with brass union nuts CP coated , 1 No.12.70mm NP bib tap 300 gms Seiko or equivalent including cost and conveyance of all materials to site, labour charges etc. complete for finished item of work |
| 12 | SPOT VALUATION | As Directed by Engineer-in-charge | 20.00 | 1 each | 246.00 | 4920.00 |
| Supplying and fixing 15 mm brass body CP finish self closing tap push type conforming to IS 1711 including cost and conveyance of all materials, labour charges etc., complete for finished item of work in all floors. |
| 13 | SPOT VALUATION | As Directed by Engineer-in-charge | 5.00 | 1 each | 767.00 | 3835.00 |
| Supply and fixing of white glazed flat back bowl urinals of size 440 mm x 265 mm x 315 mm with internal rim flushing mm fixied with screws complete inidan make (HS W/Parry/Neycer) conforming to IS 2556 -1995 as approved be Engineer - in - charge 12.7 mm PVC connection with brass plumber union nuts CM Coated. including 12.70 mm push cock 1st qulaity of approved make including supply & fixing 31.75 m dia PVC flexible waser pipe of 914.40 mm lenght of 1st including cost and conveyance of all materials to site labour charges etc., complete for finished item of work for all floors. |
| 14 | SPOT VALUATION | 701 & 707 | 33.42 | 1 sqm | 723.60 | 24183.00 |
| Flooring with Ceramic Tiles of 7.3mm thick 1st. quality of any shade of size not less than 300mm x 300mm as approved by Engineer - in - charge set over a base coat of CM (1:8), 12mm thick laid over flooring bed / V.R.C.C. slab, with neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per Sq.m and jointed with neat white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, ceramic tiles etc. to site, sales and other taxes on all materials, all operational, incidental and labour charges such as mixing of cement mortar, laying, curing, lift charges etc., complete but excluding seigniorage charges for finished item of work.(APSS No.701 & 707) in All Floors |
| 15 | SPOT VALUATION | 701 & 707 | 45.18 | 1 sqm | 645.75 | 29175.00 |
| Dadooing to walls with any color glazed tiles 1st. quality of any size of brand as approved by Engineer - in - charge and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, etc. to site, sales and other taxes on all materials, C921 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete but excluding seigniorage charges for finished item of work (APSS No.701 & 707) in All Floors |
| 16 | SPOT VALUATION | As Directed by Engineer-in-charge | 27.20 | 1 Rmt | 443.70 | 12069.00 |
| Supply and Fixing MS Pipes 50mm dia including Labour Charges for fixing complete including cost and conveyance of all materials to site, sales and other taxes, all labour charges etc., complete for finished item of work |
| 17 | SPOT VALUATION | As Directed by Engineer-in-charge | 30.17 | 1 sqm | 316.70 | 9555.00 |
| Supply and Fixing AC Sheet Corrugated 6mm thick including Labour Charges for fixing AC Sheets including cost of J bolts bitumen washers etc with or without ridges complete including cost and conveyance of all materials to site, sales and other taxes, all labour charges etc., complete for finished item of work |
| 18 | SPOT VALUATION | As directed by Engineer-in-incharge | 12.00 | 1 each | 299.45 | 3593.00 |
| Supply and Fixing of Ventilator of size 0.50 x 0.30 with 25mm x 25mm x 3mm thick equal L angles and 10mm square rods @ 150mm c/c fixing in position ,complete for finsihed item of work |
| 19 | SPOT VALUATION | 901,903 & 904 | 55.52 | 1 sqm | 380.85 | 21145.00 |
| Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc., complete but excluding seigniorage charges for Even Surfaces of Wall for finished item of work. (APSS 901,903 & 904) |
| 20 | SPOT VALUATION | 901,903 & 904 | 41.33 | 1 sqm | 395.85 | 16360.00 |
| Plastering 20mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar,scaffolding charges, lift charges, finishing,including cutting of Grooves wherever necessary as directed by Engineer - in - charge, curing, etc., complete but excluding seigniorage charges for Uneven Surfaces of Brick Wall for finished item of work. (APSS 901,903 & 904) |
| 21 | SPOT VALUATION | 912.0 | 96.85 | 1 sqm | 143.90 | 13937.00 |
| Painting to New walls with two coats of Acrylic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer interior grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for internal Walls.(APSS No. 912) in All Floors |
| 22 | SPOT VALUATION | 1201, 1207 & 1212 | 9.94 | 1 sqm | 93.20 | 926.00 |
| Painting to New Iron work with two coats of ready mixed synthetic enamel paint first quality all shades over an existing steel primer including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work. (APSS No. 1201, 1207 & 1212).in All Floors |
