Renovation Of 2 Nos Of E Type And 4 Nos Of De Type Qrs . And Ancillary Works Of New Irrigation Colony Of L . I . I . P , Khariar .
Tender Value
13.91 Lakhs
Estimated cost
Bid Submission
18 Feb 2020
0 days left
EMD
14000
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Rate Contract
Location / State
Khariar → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Of 2 Nos Of E Type And 4 Nos Of De Type Qrs . And Ancillary Works Of New Irrigation Colony Of L . I . I . P , Khariar .
BOQ
| Name of Work: Renovation of 2 nos. of E type and 4 nos. of DE type Qrs. and ancillary works of New Irrigation Colony of L.I.I.P, Khariar. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling and removing 2.5cm thick A.S. flooring including removing the debrises within 50m lead complete as per the direction of Engineer-in-Charge. | 137.67 | Sqm | |
| 2 | 2 | Dismantling and removing 2.5cm thick grading concrete from roof slab, cleaning the surface, lowering and removing the debris within 50m lead complete as per the direction of Engineer-in-Charge. | 178.87 | Sqm | |
| 3 | 3 | Removing old cement plaster from walls including racking out joints 12mm deep and removing the debris within 50m lead complete as per the direction of Engineer-in-Charge. | 6.01 | Sqm | |
| 4 | 4 | Dismantling G.C.I. or A.C. sheet roofing after carefully removing the bolts and nuts including removing the debris within 50m lead and as per direction of the Engineer-in-Charge. | 24.36 | Sqm | |
| 5 | 5 | Dismantling brick or stone masonry in lime or cement mortar under 3m height including removing the debris within 50m lead complete as per the direction of Engineer-in-charge. | 0.69 | Cum | |
| 6 | 6 | Dismantling and removing cement concrete and removing the debris within 50m lead complete as per the direction of Engineer-in-charge. | 2.16 | Cum | |
| 7 | 7 | Suppying, fitting and fixing A.C. sheet in roof including cost and carriage of materials, labour, T&P etc. complete including drilling holes in wind ties and as per direction of the Engineer-in-Charge. | 51.32 | Sqm | |
| 8 | 8 | Providing, fitting and fixing of M.S. angle of size 50mmX50mmX6mm including cost and carriage of materials, labour, T&P etc complete as per direction of the Engineer-in-charge. | 3.82 | Qtl | |
| 9 | 9 | Earth work in excavation of foundation in hard soil with all leads & lifts including dressing & levelling the bed of the foundation to the required width & depth & stacking the excavated materials away from the working areas etc. complete and as per direction of the Engineer-in-Charge. | 13.66 | Cum | |
| 10 | 10 | Providing and filling clean dry sand of approved quality from approved quarry in foundation and plinth, well watered and rammed including cost, carriage and royalties of materials, cost of labour and T&P etc. complete and as per direction of the Engineer-in-Charge. | 4.45 | Cum | |
| 11 | 11 | Cement Concrete (1:3:6) using 40mm HG metal of approved quality from approved quarry with formwork including compaction, curing, finishing the exposed surface smooth with all cost, carriage and royalties of materials, cost of labour and T&P etc. complete and as per direction of the Engineer-in-Charge. | 7.81 | Cum | |
| 12 | 12 | Cement Concrete (1:2:4) using 12mm HGCB chips of approved quality from approved quarry with formwork including compaction, curing, finishing the exposed surface smooth with all cost, carriage and royalties of materials, cost of labour and T&P etc. complete and as per direction of the Engineer-in-Charge. | 3.86 | Cum | |
| 13 | 13 | R.C.C. (1:1.5:3 ) using 12mm HGCB chips of approved quality from approved quarry with formwork including compaction, curing, finishing the exposed surface smooth with all cost, carriage and royalties of materials, cost of labour and T&P etc. complete and as per direction of the Engineer-in-Charge. | 9.02 | Cum | |
| 14 | 14 | Supplying, cutting, straightening, coiled or bent up bar/ reinforcement for R.C.C. work inclcluding bending, binding, tying the grills and placing in proper position with cost, conveyance, taxes of binding wire 18 to 20 gauge including cost and carriage of materials, cost of labour and T&P etc. complete and as per direction of the Engineer-in-Charge. | 1.76 | Qtl | |
| 15 | 15 | Providing, fitting and fixing of M.S. angle of size 60mmX60mmX6mm over C.C. drain including all cost, carriage labour & T&P etc. complete as per direction of the Engineer-in-Charge. | 2.02 | Qtl | |
| 16 | 16 | Providing and laying 100mm dia Mild steel G.I. pipes (Medium grade) conforming to IS 1239/2004 part-1 including cost of materials, labour, welding as per the specification & direction of the Engineer-in-Charge. | 64 | Mtr | |
| 17 | 17 | Fly ash brick masonry in C.M. (1:6) using fly ash brick of size 23cmx11cmx 8cm of crushing strength not less than 75kg/cm2 with dimentional tolerance plus minus 8% after immersing the bricks for six hours befour use including lowering, placing in position, watering and curing including all cost, carriage and royalties of materials, cost of labour and T&P etc. complete and as per direction of the Engineer-in-Charge. ( In Foundation and Plinth) | 0.44 | Cum | |
| 18 | 18 | Fly ash brick masonry in C.M. (1:6) using fly ash brick of size 23cmx11cmx 8cm of crushing strength not less than 75kg/cm2 with dimentional tolerance plus minus 8% after immersing the bricks for six hours before use including lowering, placing in position, watering and curing with all cost, carriage and royalties of materials, cost of labour and T&P etc. complete and as per direction of the Engineer-in-Charge. (In Superstructure) | 4.67 | Cum | |
| 19 | 19 | 12mm thick cement plaster (1:6) for brick work after racking out joints including watering, curing etc. with all cost, carriage and royalties of materials, cost of labour and T&P etc. complete and as per direction of the Engineer-in-Charge. | 48.17 | Sqm | |
| 20 | 20 | M.S. Panelled Door double leaved shutter with MS Frame over all size including frame made out of following materials conforming to relevent IS specifications. Farme- 35x35x6mm MS angle, Shutter style- Top & Bottom rail 25x25x3mm MS angle, Door panel- 1.0mm CR Sheet, Panel stiffener covering width of each leaf:- 19x5mm, MS Flat 3 nos on each leaf, Hinges size:- 100mm- 6nos. (3nos on each side) bought out as per ISS. Hold fast:- 35x35x6mm MS angle 175 mm length bifurcated at the lip 3 nos. on each side, Handle:- 19x5mm MS Flat fabricated 4 nos., Aldrop:- 2 nos. bought out as per ISS. Tower bolt:- 2 nos brought out as per ISS including all cost and carriage of materials, cost of labour and T&P etc. complete and as per direction of the Engineer-in-Charge. | 915.39 | Kg | |
| 21 | 21 | M.S. Panelled Window double leaved shutter with MS frame & Grill over all size including frame made out of following materials conforming to relevent ISS. Farme- 35x35x6mm MS angle, Shutter style:- Top & Bottom rail 25x25x3mm MS angle, Window panel- 1.0mm CR Sheet, Panel stiffener covering width of each leaf:- 19x5mm, MS Flat 2 nos on each leaf, Hinges size:- 100mm- 4nos. (2nos on each side) bought out as per ISS. Hold fast:- 35x35x6mm MS Angle 100mm length bifurcated lip 2nos. on each side. Handle- 19x5mm MS Flat 2nos. Fabricated (inside) Tower bolt:- 4 nos brought out as per ISS. Horizontal Grills 12mm MS Round at 100mm spacing including all cost and carriage of materials, cost of labour and T&P etc. complete and as per direction of the Engineer-in-Charge. | 531.24 | Kg | |
| 22 | 22 | Labour for fixing and fitting as M.S. doors, windows and ventilators in proper position and making necessary repair to damage surface including all cost of labour and T&P etc. complete and as per direction of the Engineer-in-Charge. | 40.2 | Sqm | |
| 23 | 23 | Providing and fixing vitrified tiles in floors, treads, risers and landing on 25mm thick bed of cement mortar 1:1 jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing including all cost, carriage and royalties of materials, cost of labour and T&P etc. complete and as per direction of the Engineer-in-Charge. | 136.15 | Sqm | |
| 24 | 24 | Providing and fixing anti-skid ceramic tiles in floors and steps on 25mm thick bed of cement mortar 1:1 jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing including all cost, carriage and royalties of materials, cost of labour and T&P etc. complete and as per direction of the Engineer-in-Charge. | 21.01 | Sqm | |
| 25 | 25 | Providing and fixing ceramic tiles in walls on 12mm thick cement mortar (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing including all cost, carriage and royalties of materials, cost of labour and T&P etc. complete and as per direction of the Engineer-in-Charge. | 75.67 | Sqm | |
| 26 | 26 | Distempering two coats to walls with distemper of approved shade to give an even shade including all cost and carriage of materials, cost of labour and T&P etc. complete and as per direction of the Engineer-in-Charge. | 714.02 | Sqm | |
| 27 | 27 | Painting two coats with approved enamel paint to doors and windows over a coat of primer including all cost and carriage of materials, cost of labour and T&P etc. complete and as per direction of the Engineer-in-Charge. | 114.7 | Sqm | |
| 28 | 28 | Finishing outer walls with weather coat painting two coats of approved shade over a coat of primer to give an even shade with approved paint including all cost and carriage of materials, cost of labour and T&P etc. complete and as per direction of the Engineer-in-Charge. | 3913.29 | Sqm | |
| 29 | 29 | Supplying, fitting and fixing 15mm dia Jaguar CP pillar cock capstan head srew down high pressure with long screws shanks and back nuts including all cost and carriage of materials, cost of labour and T&P etc. complete and as per direction of the Engineer-in-Charge. | 1 | Nos | |
| 30 | 30 | Supplying, fitting and fixing Water closet of 580x440mm Odisha pattern, (Indian type W.C. Pan) conforming to IS 2556 : Part 3-2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete including cost and carriage of materials, cost of labour and T&P etc. complete and as per direction of the Engineer-in-Charge. | 4 | Nos | |
| 31 | 31 | Supplying, fitting and fixing 100mm size P or S trap ( with horn or without horn) for water closet including jointing the trap with pan in cement mortar (1:1) including all cost and carriage of materials, cost of labour and T&P etc. complete and as per direction of the Engineer-in-Charge. | 4 | Nos | |
| 32 | 32 | Supplying and laying in trenches 110mm dia rigid unplasticised PVC pipes conforming to IS 4985-2000 for sewerage transportation including jointing with supply of approved solvent cement by non heat application method including testing as per specification etc including all cost and carriage of materials, cost of labour and T&P etc. complete and as per direction of the Engineer-in-Charge. | 45.2 | Mtr | |
| 33 | 33 | Providing and fixing to walls or ceiling and floor 25mm diameter UPVC pipes class conforming to ASTM-D-1785/2004 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor including all cost and carriage of materials, cost of labour and T&P etc. complete and as per direction of the Engineer-in-Charge. | 30 | Mtr | |
| 34 | 34 | Supplying, fitting and fixing of 15 mm diameter Jaguar Bib cocks (Taps) polished bright conforming to IS:781-1995 including all cost and carriage of materials, cost of labour and T&P etc. complete and as per direction of the Engineer-in-Charge.. | 4 | Nos | |
| 35 | 35 | Supplying, fitting and fixing 1000 litres capacity two layer cylindrical vertical water storage tank of Sintex make including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc including hoisting up to a height of 7.5 mts above ground level and placing the tank to the required position etc including all cost and carriage of materials, cost of labour and T&P etc. complete and as per direction of the Engineer-in-Charge. | 12 | Nos |
AI Tender Summary
Tender Timeline
Feb 04, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 18, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 19, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender