Construction Of Main Building For Govt Degree College Mattan ( Phase 1St )
Tender Value
13.25 Crore
Estimated cost
Bid Submission
03 Mar 2020
0 days left
EMD
26.50 Lakhs
Bank guarantee accepted
Document Fee
11000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mattan → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Main Building For Govt Degree College Mattan ( Phase 1St )
BOQ
| Name of Work: Construction of Main Building for Govt Degree College Mattan (phase 1st)(Advertised Cost Rs 1325.00 Lacs) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | A) Plateform Cutting | |||
| 2 | 2 | Earth Work in excavation by mechanical means (Hydraulic excavator) over areas, to required width/depth including disposal of excavated earth, as per directions of Engineer In Charge ( All kinds of Soil) | 15717 | Cum | |
| 3 | 3 | B) Construction of Main Building | |||
| 4 | 4 | Earth Work in excavation by mechanical means (Hydraulic excavator) over areas (to required width/depth) including disposal of excavated earth, las per directions of Engineer In Charge . All kinds of Soil | 3600 | Cum | |
| 5 | 5 | Providing and laying of stone soling, hand packed, including carriage of same from approved source upto site of work complete. | 750 | Cum | |
| 6 | 6 | P/L in position cement concrete in 1:4:8(1 cement :4 coarse sand : 8 graded crushed stone aggregate, 40mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. | 325.4 | Cum | |
| 7 | 7 | P/L in position cement concrete in 1:3:6(1 cement :3 coarse sand : 6 graded crushed stone aggregate, 20mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. | 221 | Cum | |
| 8 | 8 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m. | 492 | Cum | |
| 9 | 9 | Supply and filling of RBM of specified size under floors including dressing, watering, ramming including carriage of same from approved source upto site of work complete. | 2508 | Cum | |
| 10 | 10 | P/L in position cement concrete in 1:2:4(1 cement :2 coarse sand : 4 graded crushed stone aggregate, 20mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. | 145.12 | Cum | |
| 11 | 11 | Providing and laying in position specified grade in 1:1:2 (1 cement: 1 coarse sand: 2 graded stone aggregate 20mm nominal size) of reinforced cement concrete excluding the cost of centering. Shuttering, finishing and reinforcement but including carriage of all materials from approved sources up to site of work complete. -All work upto plinth level. | 1479.2 | Cum | |
| 12 | 12 | Reinforced cement concrete work in 1:1:2 (1 cement: 1 coarse sand: 2 graded stone aggregate 20mm nominal size) in suspended floors, lintels /beams, columns,stairs, slabs etc upto floor–five level excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials from approved sources upto site of work complete. | 1503 | Cum | |
| 13 | 13 | Reinforcement for RCC work including straightening cutting, bending, placing in position and binding all complete (Thermo mechanically treated bars) including all carriages complete. | 3877.25 | Qtl | |
| 14 | 14 | Providing / Fixing of necessary farm work / shuttering of Kitply (Marine Garde) including strutting, propping etc and removal of same complete | |||
| 15 | 14.01 | Foundation, footing, bases of columns etc | 2457.5 | Sqm | |
| 16 | 14.02 | Lintels, beams,plinth beams, girders etc | 4014 | Sqm | |
| 17 | 14.03 | Wall, (any thickness) including attached pilasters, buttresses, plinth and string course fillets etc | 1335.84 | Sqm | |
| 18 | 14.04 | Columns, Pillars, Piers, Abuts. Posts and struts | 2660 | Sqm | |
| 19 | 14.05 | Stairs (execulding landings) execpt spiral stair cases | 243 | Sqm | |
| 20 | 14.06 | Suspended floors, roofings, landings, balcones and access plateform | 4456.8 | Sqm | |
| 21 | 15 | Brick work with F.P.S (non modular) bricks of class designation 75 in superstructure above plinth level upto Floor V level in 1:6 mix (1 cement: 6 coarse sand) including carriage of all materials from approved sources upto site of work complete. | 582.5 | Cum | |
| 22 | 16 | Half brick work/masonry with bricks of class designation 75 in superstructure above plinth level upto Floor V level in 1:3 mix (1 cement: 3 coarse sand) including carriage of all materials from approved sources upto site of work complete. | 200 | Sqm | |
| 23 | 17 | Providing wood work in frames of doors windows, clerestory windows and other frames wrought framed and fixed in position with hold fasts lugs or with dash fasteners of required dia and length (hold fasts lugs or dash fasteners shall be paid for separately (First Class Deodar wood) including all carriages complete. | 32.42 | Cum | |
| 24 | 18 | Providing 40x5mm flat iron hold fast 40cm long incld. fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6mix (1cement:3 coarse sand:6 graded stone aggraded 20mm nominal size including all carriages complete. | 774 | No | |
| 25 | 19 | 15mm cementplaster on the rough side of single or half brick wall of mix 1:6 (1cement: 6 fine sand) including carriages of all materials complete. | 6169.2 | Sqm | |
| 26 | 20 | 6mm cement plaster of mix 1:3 (1cement: 3 fine sand)in ceilings including all carriages complete. | 7682 | Sqm | |
| 27 | 21 | Providing/applying White cement based putty of average thickness 2mm of approved brand and manufacture over plastered wall surface to prepare the surface even and smooth including all carriages complete. | 13431.2 | Sqm | |
| 28 | 22 | Providing and fixing 35mm thick glazed shutters for windows and clerestory windows using 10 kg/Sqm (4mm thick ) float glass panes including black enameled ISI marked MS butt hinges with necessary screws including all carriages complete (First Class Kail Wood) | 255.67 | Sqm | |
| 29 | 23 | P/F and fixing 35mm thick wire gauze shutters using galvanized MS wire guaze of average width for aperture 1.4mm with wire of Dia 0.63mm for doors, windows and clerestory windows including ISI marked bright finished or / and black enameled MS but hinges with necessary screws including all carriages complete (First class Kail Wood) | 255.67 | Sqm | |
| 30 | 24 | Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors, windows etc including ISI marked MS pressed Butt hinges bright finished of required size with necessary screws excluding paneling which will be paid for separately all complete including all carriages complete. (First Class Kail wood) | 252 | Sqm | |
| 31 | 25 | Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick. including all carriages complete. (First Class Kail wood) | 158.76 | Sqm | |
| 32 | 26 | 50mm thick cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement including cement slurry, and all carriages involved, complete | 3154.2 | Sqm | |
| 33 | 27 | P/L vitrified floor tiles in different sizes (thickness to be specified by the manufacture) with water absorption less than 0.08% and conforming to IS.15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 Coarse sand) including grouting the joints with white cement and matching pigments etc. complete (size of tiles 60x60cm) including carriage of all materials upto site of work complete. | 2976 | Sqm | |
| 34 | 28 | P/F 1st quality Ceramic glazed tiles conforming to ISI 13753 of minimum thickness 5mm of approved make like, AGL, NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in all colours, shades except bottle green, black of any size as approved by Engineer I/c in skirting, walls and dados etc over 12mm thick bed of cement mortar 1:3 (1 cement : 3 course sand) and jointing with grey cement slurry @ 3.3Kg per Sqm including pointing in white cement mixed with pigment of matching shade complete | 420 | Sqm | |
| 35 | 29 | Providing & Fixing 18mm minimum thick pre-polished (best quality) granite stone slabs (non water absoring) in counters, vanities etc on 20mm thick bed of cement mortar of any colour and shade gang saw 1:4 (1 cement: 4 Coarse sand and joined with white cement slurry mixed withpigment or with standard tile made compound to match the shade of the slab. including rounding, rubbing, clamping, curing, moulding, granite polish & making griooves as required complete(Note: the stone slab shall be cut to required size and laid to the required pattern including rounding,. chamfering, bull nosing of the edges as directed. Actual area of slab, as laid shall be measured. Sample to be approved by Engineer-in-charge.(including cost of all material, leads, lifts and carriages etc upto site of work complete | 249 | Sqm | |
| 36 | 30 | Applying priming coat with ready mixed Pink or Grey primer of approved brand and manufacture on new work | 2729.24 | Sqm | |
| 37 | 31 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work | 2729.24 | Sqm | |
| 38 | 32 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade two or more coats onNew work | 12521.2 | Sqm | |
| 39 | 33 | Providing and Fixing of stainless steel (grade 304) railing, made of hallow tubes, channels etc including welding grinding, buffing, polishig and making curvature (wherever required) and fitting the same with necessary stainless nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc of required size of the top of the floor or the side of waist slab with suitable arrangemnets as per approval of Engineer -In-Charge, (for payment purpose only wait of stainless steel members shal be considered excluding fixing accessories such as nuts, bolts, fasteners etc complete | 300 | RM | |
| 40 | 34 | Providing and fixing of 5mm thick float glass including wooden beading 35mmx12mm to be fixed to wooden frames with nails/screws complete with carriages of all materials complete | 321.2 | Sqm | |
| 41 | 35 | Providing and fixing in position collapsible steel shutters with vertical channels 20x1 Ox2mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T -iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer, Incld. all carriages complete. | 54 | Sqm | |
| 42 | 36 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone agg. 20mm nominal size) over 75mm bed of dry brick blast 40mm nominal size well rammed, consolidated and grouted with fine sand including finishing the top smooth including cost and carriages involved complete. | 216 | Sqm | |
| 43 | 37 | Chequerred terrazo tiles 22mm thick with graded marble chips of size upto 6mm in floors jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing & polishing complete on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) light shade using white cement including carriagesof all materials complete | 178.2 | Sqm | |
| 44 | 38 | Providing and fixing of expansion joint related system with floor location as per drawings and directions of engineer in charge . the joint system will be extruded aluminium base members , self aligning/self centering arrangement and suppoet plates as per ASTM B221-02 . the system shall be such that it provides floor to floor and floor to wall expansion control system for various vertical locations in load application areas that accomodates multi directional seismic load moments without stress to its components . system shall consist of metal profiles with a universal aluminium base member designed to accomodate various project conditions and finish floor treatments .the cover plate shall have designed width and thickness to satisfy loading moments and project requirements and secured to base members by utilising manufacturers pre engineered self centering arrangements that freely rotates in all directions . the self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminium extrusion cavity to allow freedom of movement and flexure in all directions incld vertical displacement . provision of moisture barrier membrane in the joint system to have water tight joint is mandatory requirement all as per manfacturers design and as approved by engineer in charge . ( material conforming to ASTM 6063) | 172 | RM | |
| 45 | 39 | P/L water proofing treatment in sunken portions of WC\"s Bathrooms etc by applying cement slurry mixed with waterproofing cement compound consisting of\na). first layer of cement slurry @ 0.488kg/sqm mixed with water proofing cement compound @ 0.253kg/sqm . this layer will be allowed to air cure for four hours \nb) .second layer of cement slurry of cement compound @0.126kg/sqm . thi layer will be allowed to aircure for 4 hours fallowing with water curing of 48 hours . the rate includes prepration of surface , treatment and sealing of all joints , corners junctions of pipesand masonary with polymer mixed slurry | 182.5 | Sqm | |
| 46 | 40 | Providing / Fixing Aluminium Tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. | |||
| 47 | 40.01 | 100mm | 1312 | No | |
| 48 | 40.02 | 150mm | 160 | No | |
| 49 | 41 | Providing / Fixing Aluminium handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. | |||
| 50 | 41.01 | 125mm | 656 | No | |
| 51 | 41.02 | 150mm | 160 | No | |
| 52 | 42 | Providing/Fixing L-drop of surprior qulaity (link) | 50 | No | |
| 53 | 43 | C) Construction of R/wall (Counterfort) | |||
| 54 | 44 | Earth Work in excavation by mechanical means (Hydraulic excavator) over areas (to required width/depth) including disposal of excavated earth, las per directions of Engineer In Charge . All kinds of Soil | 990 | Cum | |
| 55 | 45 | Providing and laying of stone soling, hand packed, including carriage of same from approved source upto site of work complete. | 99 | Cum | |
| 56 | 46 | P/L in position cement concrete in 1:4:8(1 cement :4 coarse sand : 8 graded crushed stone aggregate, 40mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. | 49.5 | Cum | |
| 57 | 47 | Supply/Filling of (split nallah boulders) hand packed laid in layers including leveling & all carriages complete | 990 | Cum | |
| 58 | 48 | P/L in position reinforced cement concrete in 1:1.5:3 (1 cement:1.5 course sand: 3 Crushed graded stone aggregate 20mm nominal size) excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials upto site of work complete. All work up to plinth level | 396 | Cum | |
| 59 | 49 | Reinforced cement concrete work in walls (any thickness) including plinth and string courses, fillets, columns, pillars etc. upto floor five level excluding cost of centering, shuttering, finishing and reinforcement (1 Cement : 1.5 Coarse Sand : 3 Crushed Stone aggregate 20 mm nominal size). & caraige upto site complete | 729 | Cum | |
| 60 | 50 | Reinforcement for RCC work including straightening cutting, bending, placing in position and binding all complete (Thermo mechanically treated bars) including all carriages complete. | 1125 | Qtl | |
| 61 | 51 | Providing / Fixing of necessary farm work / shuttering of Kitply (Marine Garde) including strutting, propping etc and removal of same complete | |||
| 62 | 51.01 | Foundation, footing, bases of columns etc | 396 | Sqm | |
| 63 | 51.02 | Wall, (any thickness) including attached pilasters, buttresses, plinth and string course fillets etc | 2640 | Sqm | |
| 64 | 51.03 | Columns, Pillars, Piers, Abuts. Posts and struts | 990 | Sqm | |
| 65 | 52 | Providing and fixing of 3\" dia PVC pipes for weep holes in cement concrete, complete (Prince Make) | 101.25 | RM |
AI Tender Summary
Tender Timeline
Feb 01, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedMar 03, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 04, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender