Annual Maintenance For Civil , Sanitary And Painting Works ( Social Justice And Empowred Department ) In Badnor And Sahra Distt . Bhilwara
Tender Value
10.80 Lakhs
Estimated cost
Bid Submission
10 Feb 2020
0 days left
EMD
21600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Raj. SC / ST Dev. and Corp. → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Annual Maintenance For Civil , Sanitary And Painting Works ( Social Justice And Empowred Department ) In Badnor And Sahra Distt . Bhilwara
BOQ
| NAME OF WORK : ANNUAL MAINTENANCE FOR CIVIL, SANITARY AND PAINTING WORKS (SOCIAL JUSTICE AND EMPOWRED DEPARTMENT) IN BADNOR AND SAHRA DISTT. BHILWARA | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 0.01 | RATE ARE BASED ON BSR PWD CITY CIRCLE JAIPUR EFFECTIVE FROM JUNE 2019 FOR BUILDING WORKS. | BI01010001010000000000000515BI0100001112 | ||
| 2 | 1 | CIVIL WORKS :- | BI01010001010000000000000515BI0100001113 | ||
| 3 | 1.001 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils | BI01010001010000000000000515BI0100001114 | 1 | P.Cum |
| 4 | 1.002 | Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared. | BI01010001010000000000000515BI0100001115 | 1 | P.Sqm |
| 5 | 1.003 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). | BI01010001010000000000000515BI0100001116 | 1 | P.Sqm. |
| 6 | 1.004 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). | BI01010001010000000000000515BI0100001117 | 1 | P.Sqm. |
| 7 | 1.005 | Extra for using Marble printed / Granite shade or dark shade tiles instead of white, grey, ivory, fume red brown, light green, light blue and other light shades in glazed tiles and MAT finished tiles. | BI01010001010000000000000515BI0100001118 | 1 | P.Sqm |
| 8 | 1.006 | Extra for using size above 200x300mm in glazed tiles and for using 400mm x 400mm MAT finished tiles in place of 300mm x 300mm size. | BI01010001010000000000000515BI0100001119 | 1 | P.Sqm |
| 9 | 1.007 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). | BI01010001010000000000000515BI0100001120 | 1 | P.Cum |
| 10 | 1.008 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). | BI01010001010000000000000515BI0100001121 | 1 | P.Cum |
| 11 | 1.009 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand). | BI01010001010000000000000515BI0100001122 | 1 | P.Cum |
| 12 | 1.01 | Random Rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in : Cement Mortar 1:6 ( 1-Cement : 6-Sand). | BI01010001010000000000000515BI0100001123 | 1 | P.Cum |
| 13 | 1.011 | Add extra for Random Rubble stone masonry with hard stone in Wall upto 30cm. and less thickness. | BI01010001010000000000000515BI0100001124 | 1 | P.Cum |
| 14 | 1.012 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001125 | 1 | P.Cum |
| 15 | 1.013 | Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75 Cement mortar 1 : 6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001126 | 1 | P.Sqm |
| 16 | 1.014 | Providing and fixing 50mm thick cement concrete flooring with Metallic concrete hardener topping, under layer of 38mm thick cement concrete 1:2:4 (1-cement : 2-coarse sand : 4-graded stone aggregate 20mm thick nominal size) and top layer of 12mm thick metallic concrete hardener consisting of mix 1:2 (1 cement : 2 stone aggregate, 6mm nominal size) by volume & mixed with metallic hardening compound of approved quality @ 2Kg./Sqm including cement slurry, rounding off edges etc. but excluding the cost of nosing of step etc. complete. | BI01010001010000000000000515BI0100001127 | 1 | P.Sqm |
| 17 | 1.015 | Cement plaster in skirting and/dado 18 mm thick with cement mortar 1:3 (1 cement : 3 course sand) finished with a floating coat of neat cement including rounding of junctions with floor | BI01010001010000000000000515BI0100001128 | 1 | P.Sqm |
| 18 | 1.016 | Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) For area of each slab from 901 to 2000 Sq.Cm : | BI01010001010000000000000515BI0100001129 | 1 | P.Sqm |
| 19 | 1.017 | Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete For area of each slab upto 2001 Sqcm | BI01010001010000000000000515BI0100001130 | 1 | P.Sqm |
| 20 | 1.018 | P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. size 600 mm X 600 mm | BI01010001010000000000000515BI0100001131 | 1 | P.Sqm |
| 21 | 1.019 | Add extra for Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477 , using 5kg. adhesive per sqm of tile area, in average 3mm thickness instead of cement mortar. | BI01010001010000000000000515BI0100001132 | 1 | P.Sqm |
| 22 | 1.02 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge: In cement mortar. | BI01010001010000000000000515BI0100001133 | 1 | P.Cum |
| 23 | 1.021 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar. | BI01010001010000000000000515BI0100001134 | 1 | P.Cum |
| 24 | 1.022 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001135 | 1 | P.Cum |
| 25 | 1.023 | Providing & applying one coat of UV resistant polymer cement based waterproofing slurry coating of approved make and quality on concrete or plastered surface as per specifications including preparation of surface by cleaning brushing and dust removing, filling of cracks and making the surface leak proof by mixing one part of chemical with 2 parts of cement and 2 parts of water (covering area 1.86 Sq.M/Kg of chemical) including cost of cement, labour, tools & plant, scaffolding if necessary etc., complete as directed by Engineer in Charge.\nNote: Undulations/cracks found on the surface should be rectified with Cement Motor before application and the same will be paid under relavent items. | BI01010001010000000000000515BI0100001136 | 1 | P.Sqm |
| 26 | 1.024 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead :\nWith cement mortar 1 :4 ( 1 cement : 4 coarse sand) | BI01010001010000000000000515BI0100001137 | 1 | P.Sqm |
| 27 | 1.025 | Repair to stone masonary in cement sand mortar 1:6 with old and new stone. | BI01010001010000000000000515BI0100001138 | 1 | P.Sqm |
| 28 | 1.026 | Repair to brick masonary in cement sand mortar 1:6 with new brick. | BI01010001010000000000000515BI0100001139 | 1 | P.Sqm |
| 29 | 1.027 | Cement plaster 1:3 under old stone slabs with admixture (gur,nails,binding wire to mesh and scraping scales & dressing joints of slabs complete. Proofing upto 25 mm thickness. | BI01010001010000000000000515BI0100001140 | 1 | P.Sqm |
| 30 | 1.028 | Patch repair to cement concrete floor including digging out old floor in regular shape and removal of rubbish curing etc. complete in all respects. | BI01010001010000000000000515BI0100001141 | 1 | P.Sqm |
| 31 | 1.029 | Add extra for mirror polishing on existing marble work/ Kota stone flooring work where ever required to give high gloss finish complete. | BI01010001010000000000000515BI0100001142 | 1 | P.Sqm |
| 32 | 1.03 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : | BI01010001010000000000000515BI0100001143 | 1 | P.Mtr. |
| 33 | 1.031 | Providing & laying Chequered terrazzo tiles of approved make 22mm thick with marble chips of size upto 6mm, in floors, jointed with neat cement slurry mixed wit pigment to match the shade of tiles including rubbing and polishing complete in all respect as per specification, on 28mm thick bed of C.M. 1:4 : Light shade using shade cement. | BI01010001010000000000000515BI0100001144 | 1 | P.Sqm |
| 34 | 1.032 | Filling of sunk portion of roof with earthen pots of required height including filling voids with 1:3:6 light concrete, using brick bats complete levelling and dressing the surface by 50mm thick cement concrete 1:2:4 as per specification. | BI01010001010000000000000515BI0100001145 | 1 | P.Cum |
| 35 | 1.033 | Providing Laying & jointing glazed S.W. pipes grade `A` (IS;651 marked) of approved make with spun yarn & stiff mixture of cement mortar 1:1, excavation & refilling of earth in all types of soil upto 1.2m depth, S.W. fittings, including testing of joints etc, complete. 200mm dia | BI01010001010000000000000515BI0100001146 | 1 | P.Mtr. |
| 36 | 1.034 | Providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). | BI01010001010000000000000515BI0100001147 | 1 | P.Cum |
| 37 | 1.035 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide | BI01010001010000000000000515BI0100001148 | 1 | P.Kg. |
| 38 | 1.036 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. | BI01010001010000000000000515BI0100001149 | 1 | P.Sqm. |
| 39 | 1.037 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 20mm thick. | BI01010001010000000000000515BI0100001150 | 1 | P.Sqm |
| 40 | 1.038 | Finishing with neat cement (punning). | BI01010001010000000000000515BI0100001151 | 1 | P.Sqm |
| 41 | 1.039 | Carriage of Building Rubbish Stone metal (Grit and ballast etc.) | BI01010001010000000000000515BI0100001152 | 1 | P.Cum |
| 42 | 1.04 | Fine dressed & machine cut edges 30-35 mm thicksand stone flooring over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) jointed grey cement slurry mixed with pigment to match the shade of stone complete as per design drawing and instruction of EI. Pink sand stone (Bansi Paharpur stone) | BI01010001010000000000000515BI0100001153 | 1 | P.Sqm |
| 43 | 1.041 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-voilet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall confoim to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 3.0mm thick (Wt. 5.0 Kg./Mtr. Sq.) | BI01010001010000000000000515BI0100001154 | 1 | P.Sqm |
| 44 | 1.042 | Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required : Partly fixed and partly openable [ fixed area not to exceed 33%] | BI01010001010000000000000515BI0100001155 | 1 | P.Sqm. |
| 45 | 1.043 | Making of hole (width up to 150 mm) in R.C.C. slab/wall/beams by power driven drilling machine complete as per direction of EI upto 150mm thick | BI01010001010000000000000515BI0100001156 | 1 | Each |
| 46 | 1.044 | Making the opening in masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground.\nFor door/windows/clerestory windows | BI01010001010000000000000515BI0100001157 | 1 | P.Sqm |
| 47 | 1.045 | Providing and fixing double scaffolding system on the exterior side, upto five story made with 4\" wooden member 1.5 m c/c horizontal and vertical direction joining with rassi, clamps, challies. The scaffolding system shall be stiffened with bracing, runner, connection of building if necessary with all essential safty features for the workmen etc complete as per direction of EI.The lavation area of the scaffolding shall be measured for payment. The payment will be made once irrespective of duration of scaffolding.\nNote : This item to be used for maintence work judically | BI01010001010000000000000515BI0100001158 | 1 | P.Sqm |
| 48 | 1.046 | Mechanised cleaning of storage tanks comprises of following 6 stage as mentioned below :\n1. Mechanical dewatering\n2. Desalting removal of leftover dirty water and sludge with sludge pump\n3. Cleaning of wall, ceiling and floor by high pressure water jet with help of equipments which creates a pressure of 100-150 bar\n4. Removal of remaing sludge from floor with the help of industrial vacuum cleaner.\n5. Spraying of non toxic, bio degradable ecofriendly and bacterial agent certified by a govt approved laborary to disinfect the tank from all harmfull pathogens. The dose should be safe as per the UECD guidelines & 23 adopted on 17 th december 2001.\n6. Treatment of inside tank by exposing UV radiation to kill further suspended or floating bacteria if any | BI01010001010000000000000515BI0100001159 | ||
| 49 | 1.047 | Upto 500 ltr. | BI01010001010000000000000515BI0100001160 | 1 | P.Ltr. |
| 50 | 1.048 | Above 500 ltr. to 1000 Ltr. | BI01010001010000000000000515BI0100001161 | 1 | P.Ltr. |
| 51 | 1.049 | Above 1000 ltr. | BI01010001010000000000000515BI0100001162 | 1 | P.Ltr. |
| 52 | 1.05 | Providing and fixing 20 mm thick precast terrazo tiles of approved make, with marble chips of size upto 6mm laid over roof with neat cement slurry mixed with pigment to match the shade of the tiles, including cutting ,grinding rubbing with machine complete on 20 mm thick bed of cement sand mortar 1 : 4. | BI01010001010000000000000515BI0100001163 | 1 | P.Sqm |
| 53 | 1.051 | Grading roof for water proofing treatment with water proffing compound Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001164 | 1 | P.Cum |
| 54 | 1.052 | Stone slab roofing on ground floor with fine grained stone slab from approved quarry including filling of joints of parapet and slab on both sides in cement sand mortar 1:4, with ceiling pointing in cement sand mortar 1 : 3 complete as per specification and instruction of Engineer In Charge | BI01010001010000000000000515BI0100001165 | 1 | P.Sqm |
| 55 | 1.053 | Painting top of roofs with bitumen of approved quality at 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete: With residual type petroleum bitumen of penetration 80/100 | BI01010001010000000000000515BI0100001166 | 1 | P.Sqm |
| 56 | 1.054 | Supplying and fixing of chain link fencing with angle iron posts 50x50x6mm placed at every 3 Mtr. apart 30cm in ground embedded in cement concrete 1:3:6 (30x30x45cm) corner and every tenth post to be strutted with (50 x 50 x 6cm) angle iron provided and fixed and fitted with posts including earth work in excavation etc. complete with chain link size. 50mm x 50mm x 3.15mm | BI01010001010000000000000515BI0100001167 | 1 | P.Sqm |
| 57 | 1.055 | Providing and fixing expandable fastners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/R.C.C. and making good etc. complete 50 mm long | BI01010001010000000000000515BI0100001168 | 1 | Each |
| 58 | 1.056 | Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges : Kota stone minimum 30mm thick. | BI01010001010000000000000515BI0100001169 | 1 | P.Sqm |
| 59 | 1.057 | Supplying and fixing stone lintels/bed plates of approved quarry rough dressed in cement mortar 1:4 : Above 15 cm. thick. | BI01010001010000000000000515BI0100001170 | 1 | P.Cum |
| 60 | 1.058 | Diluting and injecting by hand operated pressure pumps chemical Emulsion timber ground treatment [TCGT] in ratio 1: 2 as per manufacturers specification for POST CONSTRUCTIONAL Anti-termite treatment (as per IS 6313) part - III 1971 as amended from time to time) (excluding the cost of chemical emulsion) : | BI01010001010000000000000515BI0100001171 | ||
| 61 | 1.059 | Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration | BI01010001010000000000000515BI0100001172 | 1 | P.Mtr. |
| 62 | 1.06 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor. With Chlorpyriphos/Lindane E.C. 20% with 1% concentration | BI01010001010000000000000515BI0100001173 | 1 | P.sqm |
| 63 | 1.061 | Treatment of existing masonry using chemical emulsion@ one litre per hole at 300mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2(1 cement : 2 coarse sand) to the full depth of the hole. With Chlorpyriphos/Lindane E.C. 20% with 1% concentration | BI01010001010000000000000515BI0100001174 | 1 | P.Mtr. |
| 64 | 1.062 | Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150mm centre to centre and sealing the same. With Chlorpyriphos/Lindane E.C. 20% with 1% concentration | BI01010001010000000000000515BI0100001175 | 1 | P.Mtr. |
| 65 | 1.063 | Providing and fixing of double leaf steel shutter for cupboard, the frame is made of pressed steel ISI section 80x25 mmx 1.25 mm thick with 1.00 mm MS sheet to spot welded including holdfasts of 15x3mm, MS oxidized fittings such as butt hinges, sliding doors bolts, handles, tower bolts and twin peg etc complete including applying priming coat of approved steel primer of red oxide zinc chromate and spray painting in approved shade with deco paint of approved quality complete as per direction of Engineer In Charge | BI01010001010000000000000515BI0100001176 | 1 | P.Sqm |
| 66 | 1.064 | Providing and laying of paver block as per IS 15658 : 2006 (Indian standard for precast concrete block for paving- specification) and IRC : SP:63-2004 (guidelines for the use of interlocking concrete block pavement) M-30, 60 mm thick to be used in non traffic areas like building premises, monument premises, land scapes, public gardens/ park, domestic drives, paths and patios, Embankment slopes, sand stabilization Area etc.( As per table 1 of IS 15658:2006 Category A Denated units to key into each other on four faces zigzag shape as per IRC SP 63:2004 | BI01010001010000000000000515BI0100001177 | 1 | P.Sqm |
| 67 | 1.065 | Providing and fixing 25 mm thick Non slippery reflective type designer paving tile with metallic hardening using 2 Kg/sq.mtr made out of cement concrete of required grade, sizes of tile upto 300X300 mm Manufactured with wet cast Vibration system in two layers and laid over base of 20 mm thick cement morter1:4 using neat cement slurry in cluding finishing of joints etc. complete. Using M-30 grade cement Concrete | BI01010001010000000000000515BI0100001178 | 1 | P.Sqm |
| 68 | 1.066 | Add extra over 11.41, A & B if coloured wearing course (as per IS 1237:1980) is used. | BI01010001010000000000000515BI0100001179 | 1 | P.Sqm |
| 69 | 1.067 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete: | BI01010001010000000000000515BI0100001180 | 1 | P.Kg. |
| 70 | 1.068 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membran @ 0.40 Itr/sq.mt. by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ltr and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D-5147. The laying of membrane shall be got done through the authorized applicator of the manufacturer of membrane. 3 mm thick | BI01010001010000000000000515BI0100001181 | 1 | P.Sqm |
| 71 | 1.069 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required. 0.80 mm thick with zinc coating not less than 275 gm/m2 | BI01010001010000000000000515BI0100001182 | 1 | P.Sqm |
| 72 | 1.07 | Providing and fixing Marble stone flooring table rubbed, 15-18 mm thick over 20mm (Av.) thick base of CM 1:4 (1 cement : 4 coarse sand) jointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Makrana 'Adanga'. Above 3601 Cm2 Slabs | BI01010001010000000000000515BI0100001183 | 1 | P.Sqm. |
| 73 | 1.071 | Providing and fixing stone slabs table rubbed, 15-18 mm thick in Walls, Steps, Pillars, Counters, Jambs, Shelves, Sills etc. laid on 12mm (Av.) thick base of CM 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Rajnagar 1st quality/Ageria with light spots. 1501 Cm2 to 3600 Cm2 Tiles | BI01010001010000000000000515BI0100001184 | 1 | P.Sqm. |
| 74 | 1.072 | Providing and fixing stone slabs table rubbed, 15-18 mm thick in Walls, Steps, Pillars, Counters, Jambs, Shelves, Sills etc. laid on 12mm (Av.) thick base of CM 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Rajnagar 1st quality/Ageria with light spots. Above 3601 Cm2 Slabs | BI01010001010000000000000515BI0100001185 | 1 | P.Sqm. |
| 75 | 1.073 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. South Zed Black Above 3601 Cm2 Slabs | BI01010001010000000000000515BI0100001186 | 1 | P.Sqm. |
| 76 | 1.074 | Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete | BI01010001010000000000000515BI0100001187 | 1 | P.Each Opening |
| 77 | 1.075 | Extra for providing edge moulding to 15-18mm thick marble/ Granite/Kota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. | BI01010001010000000000000515BI0100001188 | ||
| 78 | 1.076 | Marble work Full Edge moulding | BI01010001010000000000000515BI0100001189 | 1 | P.Mtr. |
| 79 | 1.077 | Granite/Kota Stone Work Full Edge moulding | BI01010001010000000000000515BI0100001190 | 1 | P.Mtr. |
| 80 | 1.078 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. \n('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786) Thermo-mechanically Treated bars (Conforming of relevent IS code) | BI01010001010000000000000515BI0100001191 | 1 | P.Kg. |
| 81 | 1.079 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : | BI01010001010000000000000515BI0100001192 | ||
| 82 | 1.08 | Walls (any thickness) including attached pilasters, buttresses plinth and string course. | BI01010001010000000000000515BI0100001193 | 1 | P.Sqm |
| 83 | 1.081 | Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. | BI01010001010000000000000515BI0100001194 | 1 | P.Sqm |
| 84 | 1.082 | Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. Columns, pillars, posts and struts etc. | BI01010001010000000000000515BI0100001195 | 1 | P.Sqm. |
| 85 | 1.083 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. | BI01010001010000000000000515BI0100001196 | 1 | P.Sqm |
| 86 | 1.084 | Renewing glass panes, with putty and nails wherever necessary: Float glass panes of thickness 4 mm | BI01010001010000000000000515BI0100001197 | 1 | P.Sqm |
| 87 | 1.085 | Renewing glass panes and refixing existing wooden fillets : 4mm thick plain glass panes. | BI01010001010000000000000515BI0100001198 | 1 | P.Sqm |
| 88 | 1.086 | Renewal of old putty of glass panes (length) | BI01010001010000000000000515BI0100001199 | 1 | P.Rmt |
| 89 | 1.087 | Refixing old glass panes with putty and nails | BI01010001010000000000000515BI0100001200 | 1 | P.Sqm |
| 90 | 1.088 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' : 30 mm thick. Commercial Veneer both side | BI01010001010000000000000515BI0100001201 | 1 | P.Sqm |
| 91 | 1.089 | Extra for double leaf shutters. | BI01010001010000000000000515BI0100001202 | 1 | P.Sqm. |
| 92 | 1.09 | Extra for providing external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over item no. 8.13. | BI01010001010000000000000515BI0100001203 | 1 | P.Sqm |
| 93 | 1.091 | Providing and fixing fully panelled /partly panelled double leaf shutters frame for windows and ventilators as per approved design and drawings with approved steel fittings as per Annexure ‘A’ and width of styles, bottom and top rails 75mm including intermediate rails 50mm wide, beading of 25mm x 15mm size on both faces : 30 mm thick Nigeria wood grade I | BI01010001010000000000000515BI0100001204 | 1 | P.Sqm |
| 94 | 1.092 | Providing and fixing fully panelled/partly panelled/ double leaf shutter frame for doors as per approved design and drawings with approved ordinary C.P./ oxidised steel fittings as per Annexure - 'A' and width of styles & top rails of 100mm and lock rails width of 150mm and bottom rails of 200mm width including teak wood beading of size 19mm x 12mm on both faces complete : 30 mm thick Nigeria wood grade I | BI01010001010000000000000515BI0100001205 | 1 | P.Sqm |
| 95 | 1.093 | Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately). For fixed portion | BI01010001010000000000000515BI0100001206 | ||
| 96 | 1.094 | Powder coating aluminum ( minimum thickness of powder coating 50 micron) | BI01010001010000000000000515BI0100001207 | 1 | P.Kg. |
| 97 | 1.095 | For shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately). Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer) | BI01010001010000000000000515BI0100001208 | 1 | P.Kg. |
| 98 | 1.096 | Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness ( weight not less than 13.50 kg/sqm) | BI01010001010000000000000515BI0100001209 | 1 | P.Sqm |
| 99 | 1.097 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. With stainless steel cover plate | BI01010001010000000000000515BI0100001210 | 1 | Each |
| 100 | 1.098 | Filling the gap upto 5 mm depth and 5 mm width in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. | BI01010001010000000000000515BI0100001211 | 1 | P.Rmt |
| 101 | 1.099 | Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. | BI01010001010000000000000515BI0100001212 | 1 | Each |
| 102 | 1.1 | Providing and fixing aluminium U shape handle of size 100mm with SS screws etc. Complete as per direction of Engineer-in-charge Anodized (AC 15 ) aluminium | BI01010001010000000000000515BI0100001213 | 1 | Each |
| 103 | 1.101 | Repair of existing steel glazed doors, windows and ventilator, MS sheet door, garge doors, compound wall gates etc. by welding drilling complete include. Cost of welding rods and hire charge of welding meachine and TP etc complete | BI01010001010000000000000515BI0100001214 | 1 | P.Sqm |
| 104 | 1.102 | Labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts & screw etc. | BI01010001010000000000000515BI0100001215 | 1 | P.Sqm. |
| 105 | 1.103 | Repair of door, window shutters including cost of material and labour for change of damaged : | BI01010001010000000000000515BI0100001216 | ||
| 106 | 1.104 | Style / rail of teak wood 30mm thick/ Aluminium Section 4\"wide | BI01010001010000000000000515BI0100001217 | 1 | P.Rmt |
| 107 | 1.105 | Style / rail of teak wood 30mm thick/ Aluminium Section 6\" wide | BI01010001010000000000000515BI0100001218 | 1 | P.Rmt |
| 108 | 1.106 | Panel by Shuttering Ply - 9mm thick (Commercial) | BI01010001010000000000000515BI0100001219 | 1 | P.Sqm |
| 109 | 1.107 | Panel by Wire Gauge 14 mesh x 24 gauge | BI01010001010000000000000515BI0100001220 | 1 | P.Sqm |
| 110 | 1.108 | Panel by Plain Glass Panes 4mm thick | BI01010001010000000000000515BI0100001221 | 1 | P.Sqm |
| 111 | 1.109 | Aldrop of mild Steel 12\" long x12mm dia | BI01010001010000000000000515BI0100001222 | 1 | Each |
| 112 | 1.11 | Aldrop of mild Steel 8\" long x 10mm dia | BI01010001010000000000000515BI0100001223 | 1 | Each |
| 113 | 1.111 | Stopper of Aluminium with Single Rubber Gutka | BI01010001010000000000000515BI0100001224 | 1 | Each |
| 114 | 1.112 | Stopper of Aluminium withDouble Rubber Gutka | BI01010001010000000000000515BI0100001225 | 1 | Each |
| 115 | 1.113 | Stopper of Aluminium with Door Springs of mild Steel | BI01010001010000000000000515BI0100001226 | 1 | Each |
| 116 | 1.114 | Steel Hinges For Wooden Chowkhat 3\" size. | BI01010001010000000000000515BI0100001227 | 1 | Each |
| 117 | 1.115 | Steel Hinges For Wooden Chowkhat 4\" size | BI01010001010000000000000515BI0100001228 | 1 | Each |
| 118 | 1.116 | Steel Hinges For Stone Chowkhat ,4\"size | BI01010001010000000000000515BI0100001229 | 1 | Each |
| 119 | 1.117 | Steel Hinges Mild Steel Tower Bolt 6\" long | BI01010001010000000000000515BI0100001230 | 1 | Each |
| 120 | 1.118 | Steel Hinges Steel Locking Bolt | BI01010001010000000000000515BI0100001231 | 1 | Each |
| 121 | 1.119 | Steel Hinges Steel Handle 6\" size | BI01010001010000000000000515BI0100001232 | 1 | Each |
| 122 | 1.12 | Renewing glass panes with wooden fillets wherever necessary : 4mm thick plain glass panes. | BI01010001010000000000000515BI0100001233 | 1 | P.Sqm |
| 123 | 1.121 | Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete. | BI01010001010000000000000515BI0100001234 | 1 | Each |
| 124 | 1.122 | Providing and fixing wood panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled and glazed shutter 25 mm to 40 mm thick | BI01010001010000000000000515BI0100001235 | ||
| 125 | 1.123 | IS 710- 1976 marked 9 mm thick Teak ply BWR one side | BI01010001010000000000000515BI0100001236 | 1 | P.Sqm |
| 126 | 1.124 | IS 710- 1976 marked 9 mm thick Teak BWR ply both side | BI01010001010000000000000515BI0100001237 | 1 | P.Sqm |
| 127 | 1.125 | SS wire gauge 14 mesh x 24 gauge | BI01010001010000000000000515BI0100001238 | 1 | P.Sqm |
| 128 | 1.126 | 5 mm float glass | BI01010001010000000000000515BI0100001239 | 1 | P.Sqm |
| 129 | 1.127 | Extra for providing other type of fittings as mention in annexure A ( as approved by EI) : Stainless steel fittings | BI01010001010000000000000515BI0100001240 | 1 | P.Sqm. |
| 130 | 1.128 | Providing & Fixing decorative veneer of approved make for inner/outer side of shutters with fevicol & nails complete as per approved by engineer in charge. 4.0mm thick veneer | BI01010001010000000000000515BI0100001241 | 1 | P.Sqm |
| 131 | 1.129 | Providing and Fixing Cushion Vinyl/Fully flexible Vinyl Flooring confirming to I.S.-3462 Flooring of approved make with fibre base using rubber base adhesives including rolling with light wooden roller complete : 2.0 mm thick. | BI01010001010000000000000515BI0100001242 | 1 | P.Sqm |
| 132 | 1.13 | Providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade ) particle board Grade I, Type II conforming to IS : 12823 bonded formaldehyde synthetic resin ,of approved brand and manufacture in paneling fixed in aluminium doors ,windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge. Prelaminated particle board with decorative lamination on both sides. | BI01010001010000000000000515BI0100001243 | 1 | P.Sqm |
| 133 | 1.131 | Providing and fixing expanded grill made of aluminum as per design and drawing having members section of size 7.5mm x 6.0mm and opening of size 102mm x 99mm to aluminum window/vent with required screws, Y and H aluminium sec (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of engineer in charge. Powder coating aluminum ( minimum thickness of powder coating 50 micron) | BI01010001010000000000000515BI0100001244 | 1 | P.Sqm |
| 134 | 1.132 | Providing and fixing vertical Blinds , headrail shall be oriented aluminum alloy 50 mm wide x 18 mm high the thickness shall be 1.2 mm. Control unit shall be made of high grade polymer and shall be housed in side the headrail, which shall transfer motion from chain tilter to tilt rod. Chain tilter shall be made of plastic bead of diameter 4.5 mm through which 2 mm thick polyester code passes. Tilt rod shall be extruded aluminum having 3 key ways. Runner shall be moulded plastic and shall have to plastic wheels mounted on plastic exles to enable runner to slide unhindered in headrail. Luver shall be made of fabric 100 mm colour fast and shall have protective scotchgard coating to resist stains and dust. Bottom mechanism consist bottom weight made of powder coated galvanized steel for maximum corrosion resistance. The bottom weight shall be attached with bottom. | BI01010001010000000000000515BI0100001245 | 1 | P.Sqm |
| 135 | 1.133 | Providing and fixing to existing door frames. 30mm thick factory made solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles and 15 mm x15mm , top & bottom rails. M.S .frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm thick heat moulded PVC ‘C channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on either side forming stiles; and 5mm thick, 95mm wide PVC sheet out of which 75 mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75 mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2) thick, 20mm wide cross PVC sheet shall be provided as gap insert for top rail & bottom rail. | BI01010001010000000000000515BI0100001246 | 1 | P.Sqm |
| 136 | 1.134 | Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with 7mm (5mm +2mm) thick x 15mm wide PVC sheet bending on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacture’s specification & drawing.(For W.C.and bathroom door shutter). | BI01010001010000000000000515BI0100001247 | ||
| 137 | 1.135 | Providing and Fixing Aluminium composite panel of approved make 3mm thick with 0.5mm thick skin & PVDF coated approved shade for wall panelling. Main framing work to be done using 50mmx25mmx1.6mm tubular section of approved make. Stainless steel screw to be used to fix the ACP panel to be fixed to the main frame with industrial adhesive tape and panel groove to be sealed with weather proof silicon sealant suitable for glass/aluminium etc. complete in all respect as approved by Engineer-in-charge. | BI01010001010000000000000515BI0100001248 | 1 | P.Sqm |
| 138 | 1.136 | Accessories Supply and Installation of (Labour rate included in main item) Adhesives | BI01010001010000000000000515BI0100001249 | 1 | P.Kg. |
| 139 | 1.137 | Supply and fixing of Cement Bonded Particle Board (as per 14276) double skin partition using with 10 MM thick Cement Board made out of G.I. track section of size 50mmx 35mm x 0.55 mm for fixing to the roof and floor and stud section of size 48mm x 35mm x 0.55mm placed in track section vertically at 610mm intervals and at 1200mm intervals horizontally fixed to the wall by means of self expansion screws and caps to the wall and roof. Cement Board panel is to be fixed both sides of frame work by using self taping screws fixed at every 300mm intervals to the frame work leaving 3 mm gap between two panels. The cost inclusive with one coat of Alltek primer and two coats of Alltek smooth finish and cost and conveyance of all materials to site, labor charges etc., complete as per the direction of Engineer in charge. | BI01010001010000000000000515BI0100001250 | 1 | P.Sqm |
| 140 | 1.138 | Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: For thickness of tiles 10mm to 25mm. | BI01010001010000000000000515BI0100001251 | 1 | P.Sqm |
| 141 | 1.139 | Dismantling GI pipes (external work) including excavation and refilling trenches after taking out the pipes and including stacking of pipes within 50 meter lead: 15mm to 40mm nominal bore. | BI01010001010000000000000515BI0100001252 | 1 | P.Mtr. |
| 142 | 1.14 | Dismantling CI pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into block, including stacking of pipes lead at site within 50 meter, of dia: Up to 150mm dia. | BI01010001010000000000000515BI0100001253 | 1 | P.Mtr. |
| 143 | 1.141 | Dismantling of gully chamber of various sizes including CI grating with frame including stacking of useful materials near the site and disposal of unserviceable material within 50 meter lead including refilling the gap. | BI01010001010000000000000515BI0100001254 | 1 | P.Each |
| 144 | 1.142 | Making of hole (width up to 150 mm) in R.C.C. slab/wall/beams by power driven drilling machine complete as per direction of EI above 150 mm thick | BI01010001010000000000000515BI0100001255 | 1 | P.Each |
| 145 | 2 | PAINTING WORKS :- | BI01010001010000000000000515BI0100001256 | ||
| 146 | 2.001 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete | BI01010001010000000000000515BI0100001257 | 1 | P.Sqm |
| 147 | 2.002 | Providing & Laying POP moulding & beading in ceiling including nailing & scafollding etc. complete of size : 25mm x 25 mm | BI01010001010000000000000515BI0100001258 | 1 | P.Rm |
| 148 | 2.003 | Providing & Laying POP Cornice of required design & pattern in ceiling including nailing & scafollding etc. complete with fine finishing of size: 75mm x 75mm | BI01010001010000000000000515BI0100001259 | 1 | P.Rm |
| 149 | 2.004 | Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding: | BI01010001010000000000000515BI0100001260 | ||
| 150 | 2.005 | New work (Two or more coats applied @ 3.84 kg/10 sqm). | BI01010001010000000000000515BI0100001261 | 1 | P.Sqm |
| 151 | 2.006 | Old work (One or more coats). | BI01010001010000000000000515BI0100001262 | 1 | P.Sqm |
| 152 | 2.007 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : \n | BI01010001010000000000000515BI0100001263 | ||
| 153 | 2.008 | Two or more coats on new work | BI01010001010000000000000515BI0100001264 | 1 | P.Sqm |
| 154 | 2.009 | One or more coats on old work. | BI01010001010000000000000515BI0100001265 | 1 | P.Sqm |
| 155 | 2.01 | Painting (two or more coats) on rain water soil, waste and vent pipes and fitting with black anticorrosive bitumastic paint of approved brand and manufacture over and including a priming coat of ready mixed zinc chromate yellow primer on new work : 100mm dia. Pipes | BI01010001010000000000000515BI0100001266 | 1 | P.Mtr. |
| 156 | 2.011 | Colour washing of all shades to give an even shade including all scaffolding : Old work (two or more coats) with whiting with a base coat of white washing including scrapping surface. | BI01010001010000000000000515BI0100001267 | 1 | P.Sqm |
| 157 | 2.012 | White washing with lime to give an even shade including all scaffolding:\n | BI01010001010000000000000515BI0100001268 | ||
| 158 | 2.013 | New work (three or more coats). | BI01010001010000000000000515BI0100001269 | 1 | P.Sqm |
| 159 | 2.014 | Old work (two or more coats) including scrapping old surface and repairing with whiting where ever necessary. | BI01010001010000000000000515BI0100001270 | 1 | P.Sqm |
| 160 | 2.015 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: | BI01010001010000000000000515BI0100001271 | ||
| 161 | 2.016 | New work (two or more coats) over and including scrapping and priming coat with cement primer. | BI01010001010000000000000515BI0100001272 | 1 | P.Sqm |
| 162 | 2.017 | Old work (one or more coats) including scrapping surface and necessary repairs. Colour Change | BI01010001010000000000000515BI0100001273 | 1 | P.Sqm |
| 163 | 2.018 | Removing dry or oil bound distemper by scrapping sand papering and preparing surface smooth including necessary repairs to scratches by sandla/loi and all scaffolding (for colour changing only) | BI01010001010000000000000515BI0100001274 | 1 | P.Sqm |
| 164 | 2.019 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: \n | BI01010001010000000000000515BI0100001275 | ||
| 165 | 2.02 | Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. | BI01010001010000000000000515BI0100001276 | 1 | P.Sqm |
| 166 | 2.021 | Old work (One or more coats ) | BI01010001010000000000000515BI0100001277 | 1 | P.Sqm |
| 167 | 2.022 | Applying priming coat : | BI01010001010000000000000515BI0100001278 | ||
| 168 | 2.023 | With ready mix pink or gray primer of approved brand and manufacture on wood work hard and soft wood. | BI01010001010000000000000515BI0100001279 | 1 | P.Sqm |
| 169 | 2.024 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat) | BI01010001010000000000000515BI0100001280 | 1 | P.Sqm |
| 170 | 2.025 | French sprit polishing : | BI01010001010000000000000515BI0100001281 | ||
| 171 | 2.026 | Two or more coats on new work including a coat of wood filler. | BI01010001010000000000000515BI0100001282 | 1 | P.Sqm |
| 172 | 2.027 | One or more coats on old work. | BI01010001010000000000000515BI0100001283 | 1 | P.Sqm |
| 173 | 2.028 | Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete | BI01010001010000000000000515BI0100001284 | ||
| 174 | 2.029 | New Plastered Surface (three or more coats) | BI01010001010000000000000515BI0100001285 | 1 | P.Sqm |
| 175 | 2.03 | Old Plastered Surface (two or more coats) | BI01010001010000000000000515BI0100001286 | 1 | P.Sqm |
| 176 | 2.031 | Lettering with black Japan paint of approved brand and manufacture. | BI01010001010000000000000515BI0100001287 | 1 | P.P. Letter\nPer cm. height |
| 177 | 2.032 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding.\n New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). | BI01010001010000000000000515BI0100001288 | 1 | P.Sqm |
| 178 | 2.033 | Finishing walls with textured exterior paint of required shade as per approved colour complete as per manufacturers specifications including primer coat and protecting coat including scaffolding and safety provision | BI01010001010000000000000515BI0100001289 | ||
| 179 | 2.034 | Roller Finish av. thickness 400 to 500 microns. | BI01010001010000000000000515BI0100001290 | 1 | P.Sqm |
| 180 | 2.035 | Trowel Finish av. thickness 1500 to 2000 microns. | BI01010001010000000000000515BI0100001291 | 1 | P.Sqm |
| 181 | 3 | SANITARY WORKS :- | BI01010001010000000000000515BI0100001292 | ||
| 182 | 3.001 | P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 530x410mm. | BI01010001010000000000000515BI0100001293 | 1 | P.Each |
| 183 | 3.002 | P & F European type white glazed vitreous china 1st quality Double syphonic W.C (IS :2556 Mark) with P or S trap including cutting and making good the wall and floor | BI01010001010000000000000515BI0100001294 | 1 | P.Each |
| 184 | 3.003 | P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor | BI01010001010000000000000515BI0100001295 | 1 | P.Each |
| 185 | 3.004 | P & F water closet Seat Covers with brass hinges complete : Solid PVC (IS 2548 marked) grade-I Black for EWC. | BI01010001010000000000000515BI0100001296 | 1 | P.Each |
| 186 | 3.005 | Labour charges for removing W.C. pan (any type) of all sizes with care including all necessary fittings P or S trap. | BI01010001010000000000000515BI0100001297 | 1 | P.Each |
| 187 | 3.006 | P & F vitreous china P trap of approved quality | BI01010001010000000000000515BI0100001298 | 1 | P.Each |
| 188 | 3.007 | P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete. Flat Back (small) size 456x355x265mm. | BI01010001010000000000000515BI0100001299 | 1 | P.Each |
| 189 | 3.008 | P&F Marble Urinal Partition slab both sides polished of approved design cut from marble size 900x600mm. Makrana II quality marble having light spots | BI01010001010000000000000515BI0100001300 | 1 | P.Each |
| 190 | 3.009 | P & F W.V.C. (IS: 2556 Mark) Squatting Urinal of standard make complete. Including cutting & making good the floor: Size 450x350mm | BI01010001010000000000000515BI0100001301 | 1 | P.Each |
| 191 | 3.01 | P & F Automatic Flushing Cistern of first quality (IS : 774 mark) of approved make fitting, siphon with copper tube, C.I. brackets complete including cutting and making good the wall. | BI01010001010000000000000515BI0100001302 | ||
| 192 | 3.011 | WVC (as per IS : 2556) 10 litres. | BI01010001010000000000000515BI0100001303 | 1 | P.Each |
| 193 | 3.012 | Deduct if plastic syphon is used. | BI01010001010000000000000515BI0100001304 | 1 | P.Each |
| 194 | 3.013 | Labour charges for removing and refixing of urinals (all type & sizes) including all necessary fittings. | BI01010001010000000000000515BI0100001305 | 1 | P.Each |
| 195 | 3.014 | P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc. | BI01010001010000000000000515BI0100001306 | ||
| 196 | 3.015 | 15mm dia nominal bore 'B' Class | BI01010001010000000000000515BI0100001307 | 1 | P.Mtr. |
| 197 | 3.016 | 25mm dia nominal bore 'B' Class | BI01010001010000000000000515BI0100001308 | 1 | P.Mtr. |
| 198 | 3.017 | P & F Flush Cock / Flush Valve (IS : 9758 Mark) for WC of approved quality make : | BI01010001010000000000000515BI0100001309 | ||
| 199 | 3.018 | (-do-) concealed 25mm nominal bore. | BI01010001010000000000000515BI0100001310 | 1 | P.Each |
| 200 | 3.019 | Brass / Gun metal Half-turn wt. 1 Kg. of approved quality / make, 25mm nominal bore. | BI01010001010000000000000515BI0100001311 | 1 | P.Each |
| 201 | 3.02 | Removing and re-fixing of wash hand basin including all necessary fittings. | BI01010001010000000000000515BI0100001312 | 1 | P.Each |
| 202 | 3.021 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall : | BI01010001010000000000000515BI0100001313 | ||
| 203 | 3.022 | Size 580 mm x 450 mm | BI01010001010000000000000515BI0100001314 | 1 | P.Each |
| 204 | 3.023 | Size 550 mm x 400 mm | BI01010001010000000000000515BI0100001315 | 1 | P.Each |
| 205 | 3.024 | P & F Bottle Trap of approved make : C.P Brass 40 mm | BI01010001010000000000000515BI0100001316 | 1 | P.Each |
| 206 | 3.025 | P& F waste Pipe with all fitting P.V.C with C.P nut 32 mm | BI01010001010000000000000515BI0100001317 | 1 | P.Each |
| 207 | 3.026 | P & F Looking Mirrors with P.V.C. frame of approved make as per direction of Engineer-in-charge | BI01010001010000000000000515BI0100001318 | ||
| 208 | 3.027 | Size 500x400mm | BI01010001010000000000000515BI0100001319 | 1 | P.Each |
| 209 | 3.028 | Oval shape 450x350 mm | BI01010001010000000000000515BI0100001320 | 1 | P.Each |
| 210 | 3.029 | P & F Toilet Shelf of approved quality/make: W.V.C. (I.S.: 2556 Mark) Size 300mm | BI01010001010000000000000515BI0100001321 | 1 | P.Each |
| 211 | 3.03 | P & F Toilet Shelf of approved quality/make: W.V.C. (I.S.: 2556 Mark) Size 550 mm | BI01010001010000000000000515BI0100001322 | 1 | P.Each |
| 212 | 3.031 | P & F Towel Rail or Ring of approved quality/make: | BI01010001010000000000000515BI0100001323 | ||
| 213 | 3.032 | C.P. brass Towel Rail elbow type with concealed screws size 600 mm (Heavy duty). | BI01010001010000000000000515BI0100001324 | 1 | P.Each |
| 214 | 3.033 | C.P. Brass Towel Ring revolving type | BI01010001010000000000000515BI0100001325 | 1 | P.Each |
| 215 | 3.034 | P & F Grating of approved quality/make: Stainless Steel Sheet size 125mm dia. Heavy Quality of approved make | BI01010001010000000000000515BI0100001326 | 1 | P.Each |
| 216 | 3.035 | P & F Toilet Paper Holder with rod of approved quality/make: C.P. brass heavy & Superior quality. | BI01010001010000000000000515BI0100001327 | 1 | P.Each |
| 217 | 3.036 | P & F Soap Dish or Tray of approved quality/make C.P. brass heavy and superior quality. | BI01010001010000000000000515BI0100001328 | 1 | P.Each |
| 218 | 3.037 | P & F Twin- peg of approved quality / make C.P. brass (heavy)Superior quality | BI01010001010000000000000515BI0100001329 | 1 | P.Each |
| 219 | 3.038 | P & F Shower arm 15mm dia of approved quality/make. C.P.brass heavy & superior quality (-do-) size 370mm.(-do-) | BI01010001010000000000000515BI0100001330 | 1 | P.Each |
| 220 | 3.039 | P & F Bath Shower of approved quality/make. C.P. brass of Heavy & superior quality, revolving with adjustable key 150mm. | BI01010001010000000000000515BI0100001331 | 1 | P.Each |
| 221 | 3.04 | P & F Extension Pipe for bib cocks of approved quality/make. C.P. brass of Heavy & Superior quality 150 X 15mm. | BI01010001010000000000000515BI0100001332 | 1 | P.Each |
| 222 | 3.041 | Providing & fixing C.P.flange for 15mm dia taps. | BI01010001010000000000000515BI0100001333 | 1 | P.Each |
| 223 | 3.042 | Providing & fixing C.P.flange for 15mm dia taps. | BI01010001010000000000000515BI0100001334 | 1 | P.Each |
| 224 | 3.043 | P & F G.I. pipes (Internal Work) with G.I. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors: | BI01010001010000000000000515BI0100001335 | ||
| 225 | 3.044 | Concealed pipe in wall including painting with anticorrosive bitumen paint 15 mm dia nominal bore 'B' Class | BI01010001010000000000000515BI0100001336 | 1 | P.Mtr. |
| 226 | 3.045 | Exposed on wall 25 mm dia nominal bore B class | BI01010001010000000000000515BI0100001337 | 1 | P.Mtr. |
| 227 | 3.046 | 25mm dia nominal bore 'B' Class | BI01010001010000000000000515BI0100001338 | 1 | P.Mtr |
| 228 | 3.047 | Making connection of G.I. distribution branch with G.I. main including all fitting. | BI01010001010000000000000515BI0100001339 | ||
| 229 | 3.048 | Upto 25mm dia | BI01010001010000000000000515BI0100001340 | 1 | P.Each |
| 230 | 3.049 | Beyond 25mm & upto 100mm dia | BI01010001010000000000000515BI0100001341 | 1 | P.Each |
| 231 | 3.05 | P & F Pilllar Cocks (IS :8934 Mark) of superior quality and approved make: | BI01010001010000000000000515BI0100001342 | ||
| 232 | 3.051 | C.P. Pillar cock, 15 mm dia nominal bore | BI01010001010000000000000515BI0100001343 | 1 | P.Each |
| 233 | 3.052 | Synthetic Material (PTMT) Pillar cock of approved quality / make 15mm nominal bore. | BI01010001010000000000000515BI0100001344 | 1 | P.Each |
| 234 | 3.053 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: | BI01010001010000000000000515BI0100001345 | ||
| 235 | 3.054 | C.P. Brass bib cock,15mm nominal bore. | BI01010001010000000000000515BI0100001346 | 1 | P.Each |
| 236 | 3.055 | (-do-) Long body, 15mm nominal bore weight not less than 690 gm | BI01010001010000000000000515BI0100001347 | 1 | P.Each |
| 237 | 3.056 | P & F Push Cock superior quality, of approved make | BI01010001010000000000000515BI0100001348 | ||
| 238 | 3.057 | C.P. Brass 15 mm. | BI01010001010000000000000515BI0100001349 | 1 | P.Each |
| 239 | 3.058 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : | BI01010001010000000000000515BI0100001350 | ||
| 240 | 3.059 | Brass wt. Not less than 300 gm,15mm. | BI01010001010000000000000515BI0100001351 | 1 | P.Each |
| 241 | 3.06 | Brass wt.Not less than 400 gm, 20mm. | BI01010001010000000000000515BI0100001352 | 1 | P.Each |
| 242 | 3.061 | (-do-) wt.Not less than 600 gm, 25mm. | BI01010001010000000000000515BI0100001353 | 1 | P.Each |
| 243 | 3.062 | (-do-) wt.Not less than 800 gm, 32mm. | BI01010001010000000000000515BI0100001354 | 1 | P.Each |
| 244 | 3.063 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. | BI01010001010000000000000515BI0100001355 | ||
| 245 | 3.064 | C.P. Inlet connection 15mm.Brass (IS : 8931 marked) | BI01010001010000000000000515BI0100001356 | 1 | P.Each |
| 246 | 3.065 | ---do--- with 37 cm long pipe and nut. | BI01010001010000000000000515BI0100001357 | 1 | P.Each |
| 247 | 3.066 | Synthetic Material (PTMT) Inlet connection of approved quality/make 15 mm nominal size. | BI01010001010000000000000515BI0100001358 | 1 | P.Each |
| 248 | 3.067 | P & F 15 mm. Dia Connection Pipe of approved quality/make : PVC pipe with C.P. Brass nuts upto length, 450mm | BI01010001010000000000000515BI0100001359 | 1 | P.Each |
| 249 | 3.068 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : | BI01010001010000000000000515BI0100001360 | ||
| 250 | 3.069 | Gun-metal 15mm nominal bore. | BI01010001010000000000000515BI0100001361 | 1 | P.Each |
| 251 | 3.07 | (-do-) 25mm nominal bore. | BI01010001010000000000000515BI0100001362 | 1 | P.Each |
| 252 | 3.071 | (-do-) 50mm nominal bore. | BI01010001010000000000000515BI0100001363 | 1 | P.Each |
| 253 | 3.072 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: | BI01010001010000000000000515BI0100001364 | ||
| 254 | 3.073 | 300 (-do-) | BI01010001010000000000000515BI0100001365 | 1 | P.Each |
| 255 | 3.074 | 500 (-do-) | BI01010001010000000000000515BI0100001366 | 1 | P.Each |
| 256 | 3.075 | 1000 (-do-) | BI01010001010000000000000515BI0100001367 | 1 | P.Each |
| 257 | 3.076 | Hoisting Charges for each floor : For water tanks | BI01010001010000000000000515BI0100001368 | 1 | P.Each |
| 258 | 3.077 | Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size : | BI01010001010000000000000515BI0100001369 | ||
| 259 | 3.078 | 15mm dia nominal bore | BI01010001010000000000000515BI0100001370 | 1 | P.Each |
| 260 | 3.079 | 25mm dia nominal bore | BI01010001010000000000000515BI0100001371 | 1 | P.Each |
| 261 | 3.08 | 50mm dia nominal bore | BI01010001010000000000000515BI0100001372 | 1 | P.Each |
| 262 | 3.081 | Providing & fixing S.W. square mouth Gully trap `A` grade (IS 651-1992 marked) of approved make & design in existing man-hole. Size 225 X 150mm | BI01010001010000000000000515BI0100001373 | 1 | P.Each |
| 263 | 3.082 | P & F Square-mouth gully trap `A` grade (IS 651-1992 :marked) of approved make complete with C.I. grating, frame & Cover masonary chamber in C.M. 1:6, 100mm thick C.C. 1:5:10 base concrete, 40mm thick C.C.M-15 grade coping, 12mm thick cement plaster in CM 1:3 complete as per approved design & type. Trap size 225 X 150 mm, ferrow cement cover with frame Internal Chamber size 450 X 450mm. | BI01010001010000000000000515BI0100001374 | 1 | P.Each |
| 264 | 3.083 | Raising manhole cover and frames slab to required level including dismantling existing slab and making good the damage as required (raising depth of manhole masonry to be paid separately). Rectangular manhole 150x120 cm | BI01010001010000000000000515BI0100001375 | 1 | P.Each |
| 265 | 3.084 | Construction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. | BI01010001010000000000000515BI0100001376 | ||
| 266 | 3.085 | Depth up to 0.5 M | BI01010001010000000000000515BI0100001377 | 1 | P.Each |
| 267 | 3.086 | Add extra over item 3.19.1 for every additional 0.10m depth above 0.5 m depth. | BI01010001010000000000000515BI0100001378 | 1 | P.Each |
| 268 | 3.087 | Providing & fixing Spun –Centrifugally cast Iron Pipes (IS : 3989 Mark ) of Approved make in wall or in floor with M.S. Holder bat clamps in 10 X 10 X10 Cm. M-15 Grade concrete blocks, joints filled with CM 1:4 with spun yarn including cutting holes and making good the wall:- 100 mm dia | BI01010001010000000000000515BI0100001379 | 1 | P.Mtr |
| 269 | 3.088 | Providing & fixing Spun –Centrifugally cast Iron Pipes fitting (IS : 3989 Mark ) in CM 1:4 with spun Yarn. | BI01010001010000000000000515BI0100001380 | ||
| 270 | 3.089 | 100mm w/o door Offset | BI01010001010000000000000515BI0100001381 | 1 | P.Each |
| 271 | 3.09 | 100mm w/o door Socket | BI01010001010000000000000515BI0100001382 | 1 | P.Each |
| 272 | 3.091 | 100mm w/o door Bend | BI01010001010000000000000515BI0100001383 | 1 | P.Each |
| 273 | 3.092 | 100mm w/o door Cowel | BI01010001010000000000000515BI0100001384 | 1 | P.Each |
| 274 | 3.093 | 100mm w/o door Tee | BI01010001010000000000000515BI0100001385 | 1 | P.Each |
| 275 | 3.094 | 100mm with door Bend | BI01010001010000000000000515BI0100001386 | 1 | P.Each |
| 276 | 3.095 | 100mm with door Tee | BI01010001010000000000000515BI0100001387 | 1 | P.Each |
| 277 | 3.096 | Providing and Fixing Spun –Cast Iron floor trap (Nahani) of (IS :3989 Mark ) approved quality / make with socket down or hinged grating including cutting and making good the floor :- Size 100 x 100 mm | BI01010001010000000000000515BI0100001388 | 1 | P.Each |
| 278 | 3.097 | Add extra for Lead caulked joints (IS:782-1978) in sand cast iron pipes/spun- 100mm dia, 0.98 Kg. Pig lead | BI01010001010000000000000515BI0100001389 | 1 | P.Each |
| 279 | 3.098 | Construction of Cement Concrete Chamber 125mm dia on depressed floor upto 45cm height from floor with : C.P. doom grating | BI01010001010000000000000515BI0100001390 | 1 | P.Each |
| 280 | 3.099 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. | BI01010001010000000000000515BI0100001391 | 1 | P.Sqm |
| 281 | 3.1 | Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 25 mm thick. | BI01010001010000000000000515BI0100001392 | 1 | P.Sqm |
| 282 | 3.101 | Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75 Cement mortar 1 : 4 (1 cement : 4 coarse sand) | BI01010001010000000000000515BI0100001393 | 1 | P.Sqm. |
| 283 | 3.102 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size). | BI01010001010000000000000515BI0100001394 | 1 | P.Cum |
| 284 | 3.103 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: | BI01010001010000000000000515BI0100001395 | ||
| 285 | 3.104 | Plain Tee 75mm dia | BI01010001010000000000000515BI0100001396 | 1 | P.Each |
| 286 | 3.105 | Plain Tee 110mm dia | BI01010001010000000000000515BI0100001397 | 1 | P.Each |
| 287 | 3.106 | Plain floor trap 110mm dia | BI01010001010000000000000515BI0100001398 | 1 | P.Each |
| 288 | 3.107 | Vent Cowel 75mm dia | BI01010001010000000000000515BI0100001399 | 1 | P.Each |
| 289 | 3.108 | Vent Cowel 110mm dia | BI01010001010000000000000515BI0100001400 | 1 | P.Each |
| 290 | 3.109 | Bend 87 .5 110mm dia | BI01010001010000000000000515BI0100001401 | 1 | P.Each |
| 291 | 3.11 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make | BI01010001010000000000000515BI0100001402 | ||
| 292 | 3.111 | 110 mm dia | BI01010001010000000000000515BI0100001403 | 1 | P.Mtr. |
| 293 | 3.112 | P & F Stop Cock (IS :8931 Mark), superior quality & of approved make: | BI01010001010000000000000515BI0100001404 | ||
| 294 | 3.113 | (-do-) 1350gm. 25 mm nominal bore. | BI01010001010000000000000515BI0100001405 | 1 | P.Each |
| 295 | 3.114 | C.P. Brass 15mm nominal bore. | BI01010001010000000000000515BI0100001406 | 1 | P.Each |
| 296 | 3.115 | C.P. Brass Concealed Stop Cock 15mm. | BI01010001010000000000000515BI0100001407 | 1 | P.Each |
| 297 | 3.116 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. | BI01010001010000000000000515BI0100001408 | ||
| 298 | 3.117 | 75 mm dia | BI01010001010000000000000515BI0100001409 | 1 | P.Mtr |
| 299 | 3.118 | 110 mm dia | BI01010001010000000000000515BI0100001410 | 1 | P.Mtr |
| 300 | 3.119 | P & F Jet spray for water closet with C.P. Copper Tube flange of approved make. | BI01010001010000000000000515BI0100001411 | 1 | P.Each |
| 301 | 3.12 | P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc. 50mm dia nominal bore 'B' Class | BI01010001010000000000000515BI0100001412 | 1 | P.Mtr. |
| 302 | 3.121 | P & F Gun-metal Non-return Valve or Check Valve (IS :Make) of approved make, superior quality: 15mm nominal bore. Horizontal | BI01010001010000000000000515BI0100001413 | 1 | P.Each |
| 303 | 3.122 | P & F Mixing Range (15mm) C.P. One hole/close hole basin mixer with casted spout. | BI01010001010000000000000515BI0100001414 | 1 | P.Each |
| 304 | 3.123 | P & F C.P. brass Urinal Spreader for stall urinal of approved make. | BI01010001010000000000000515BI0100001415 | 1 | P.Each |
| 305 | 3.124 | P& F waste Coulping with fittings of approved quality /make: C.P Brass 40 mm dia | BI01010001010000000000000515BI0100001416 | 1 | P.Each |
| 306 | 3.125 | Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C floor & RCC slab covering with M15 grade c.c. floor, 50 mm thick stone slab partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos stone foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:- | BI01010001010000000000000515BI0100001417 | ||
| 307 | 3.126 | Size 230 x110 x150 cm.(for 20 users) with 115 mm thick RCC (M-20) slab with Tor steel reinforcement 10mm ? @15 cm c/c bothways including shuttering complete in all respect. | BI01010001010000000000000515BI0100001418 | 1 | P.Each |
| 308 | 3.127 | Size 400 x140x150 cm.(for 50 users) with 115 mm thick RCC (M-20) slab with Tor steel reinforcement 10mm ? @15 cm c/c bothways including shuttering complete in all respect. | BI01010001010000000000000515BI0100001419 | 1 | P.Each |
| 309 | 3.128 | Emptying of Septic tank ,Soakage well etc. by disposing or sludge upto 5 Km. lead & taking out sewage including cleaning of site. | BI01010001010000000000000515BI0100001420 | 1 | P.Cum |
| 310 | 3.129 | Supplying & Fixing R.C.C. Manholes covers with frame of approved make (Light duty). | BI01010001010000000000000515BI0100001421 | ||
| 311 | 3.13 | Size 500mm dia (Double seal) | BI01010001010000000000000515BI0100001422 | 1 | P.Each |
| 312 | 3.131 | Size 600 X 600mm (Double seal) | BI01010001010000000000000515BI0100001423 | 1 | P.Each |
| 313 | 3.132 | Construction of soakage well in all type of soil with 300 mm thick dry masonry, top and bottom 300 mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring , earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr.: Size 300 Cm. dia outside & 300 Cm. depth . | BI01010001010000000000000515BI0100001424 | 1 | P.Each |
| 314 | 3.133 | Construction of Soakage well in all types of soil of approved drawing, top 90 Cm .Portion in 450mm thick masonry with CM 1:6, 80 mm thick stone slab covering, jointing of slab in CM 1:3 ,Ralthal, kharanja 40mm thick M-15 grade C.C flooring, earth work etc . complete including disposal of surplus earth within a lead of 50 mtr . | BI01010001010000000000000515BI0100001425 | ||
| 315 | 3.134 | Inner dia 90 Cm & 10 to 12 Mtr deep. | BI01010001010000000000000515BI0100001426 | 1 | P.Each |
| 316 | 3.135 | Inner dia 60 Cm & 10 to 12 Mtr deep. | BI01010001010000000000000515BI0100001427 | 1 | P.Each |
| 317 | 3.136 | Providing Laying & jointing glazed S.W. pipes grade `A` (IS;651 marked) of approved make with spun yarn & stiff mixture of cement mortar 1:1, excavation & refilling of earth in all types of soil upto 1.2m depth, S.W. fittings, including testing of joints etc, complete. | BI01010001010000000000000515BI0100001428 | ||
| 318 | 3.137 | 100mm dia | BI01010001010000000000000515BI0100001429 | 1 | P.Mtr. |
| 319 | 3.138 | 150mm dia | BI01010001010000000000000515BI0100001430 | 1 | P.Mtr. |
| 320 | 3.139 | Providing & Laying C.C. 1:5:10 (Stone aggregate 40mm nominal size) all around S.W. pipe including 15 Cm. thick bed concrete (Width W= Diameter of pipe in Cm+30 Cm.)( Excluding cost of pipe) | BI01010001010000000000000515BI0100001431 | ||
| 321 | 3.14 | 100mm dia S.W. pipe | BI01010001010000000000000515BI0100001432 | 1 | P.Mtr. |
| 322 | 3.141 | 150mm dia S.W. pipe | BI01010001010000000000000515BI0100001433 | 1 | P.Mtr. |
| 323 | 3.142 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. | BI01010001010000000000000515BI0100001434 | ||
| 324 | 3.143 | Inside size 300 X 300 mm depth upto 0.5 M Cement cover with frame. | BI01010001010000000000000515BI0100001435 | 1 | P.Each |
| 325 | 3.144 | Deduct for using brick work 230 mm thick in place of 300 mm thick stone masonry | BI01010001010000000000000515BI0100001436 | 1 | P.Each |
| 326 | 3.145 | -do- size 450 x 450mm depth upto 0.5 M Cement cover with frame | BI01010001010000000000000515BI0100001437 | 1 | P.Each |
| 327 | 3.146 | Deduct for using brick work 230 mm thick in place of 300 mm thick stone masonry | BI01010001010000000000000515BI0100001438 | 1 | P.Each |
| 328 | 3.147 | Removing & Re fixing of P.V.C. Cistern fittings (Syphon, Ball cock & Handle Set) complete as per direction of Enginner-in-Charge | BI01010001010000000000000515BI0100001439 | 1 | P.Each |
| 329 | 3.148 | P & F foot valve of superior quality and approved make with fittings : Brass 25 mm. | BI01010001010000000000000515BI0100001440 | 1 | P.Each |
| 330 | 3.149 | P & F Kitchen & Lab. Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor : 1.0 mm thick Salem stainless steel AISI -304 & IS 13983-1994 kitchen sink of approved make as per Engineer-in-charge with large waste coupling. 24 x 18 x 8 20x16x8 | BI01010001010000000000000515BI0100001441 | 1 | P.Each |
| 331 | 3.15 | P & F C.P. Health Faucet with 1Mtr. Long Tube & Hook of approved make and heavy as per direction of Enginner-in-Charge | BI01010001010000000000000515BI0100001442 | 1 | P.Each |
| 332 | 3.151 | C.P. Pillar cock, Swan-neck with casted spout, 15mm nominal bore. | BI01010001010000000000000515BI0100001443 | 1 | P.Each |
| 333 | 3.152 | Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge Angular stop cock with long thread 15 mm nominal size | BI01010001010000000000000515BI0100001444 | 1 | P.Each |
| 334 | 3.153 | Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge Two way Bib Cock 15 mm nominal size | BI01010001010000000000000515BI0100001445 | 1 | P.Each |
| 335 | 3.154 | P & F Mixing Range (15mm) C.P. wall mixer telephonic type crutch & telephonic shower. | BI01010001010000000000000515BI0100001446 | 1 | P.Each |
| 336 | 3.155 | P & F Mixing Range (15mm) C.P. sink mixer with swinging spout J-pipe. | BI01010001010000000000000515BI0100001447 | 1 | P.Each |
| 337 | 3.156 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 160 mm dia | BI01010001010000000000000515BI0100001448 | 1 | P.Mtr |
| 338 | 3.157 | Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge 190 mm rain shower | BI01010001010000000000000515BI0100001449 | 1 | P.Each |
| 339 | 3.158 | Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge Shower arm | BI01010001010000000000000515BI0100001450 | 1 | P.Each |
| 340 | 3.159 | P & F W.V.C. (IS: 2556 Mark) Squatting Urinal of standard make complete. Including cutting & making good the floor: Size 450x350mm | BI01010001010000000000000515BI0100001451 | 1 | P.Each |
| 341 | 3.16 | Supply & fixing Pre-cast RCC Rinngs at the mouth of recharge shaft of M20 mix with 40 mm thickness Diameter 750 mm | BI01010001010000000000000515BI0100001452 | 1 | P.Rm |
| 342 | 3.161 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete. 75mm thick with 20mm thick nominal size aggregate. | BI01010001010000000000000515BI0100001453 | 1 | P.Sqm |
| 343 | 3.162 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). | BI01010001010000000000000515BI0100001454 | 1 | P.Cum |
| 344 | 3.163 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : \n a) first layer of slurry of cement @ 0.488 kg/sqm mixed with water proffing cement compound @0.253 kg//sqm .This layer will be allowed to air cure for 4 hours.\nb) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proffing cement compound @ 0.126 kg/sqm This layer will be allowed to air cure for 4 hours followed by water curing for 48 hours. The rates includes preparation of surface treatment & sealing of all joints ,corners, junction with polymer mixed slurry. | BI01010001010000000000000515BI0100001455 | 1 | P.Sqm. |
AI Tender Summary
Tender Timeline
Jan 31, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 10, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 11, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender