Newly Proposed Pharmacy Store Room At Fire Pump House , Regional Cancer Center
Tender Value
7.71 Lakhs
Estimated cost
Bid Submission
15 Feb 2020
0 days left
EMD
19473
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
RCC-TVM → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Newly Proposed Pharmacy Store Room At Fire Pump House , Regional Cancer Center
BOQ
| Name of Work: PHARMACY STORE ROOM, REGIONAL CANCER CENTRE, THIRUVANANTHAPURAM | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : | |||
| 2 | 1.01 | Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) | Item 1 | 551.32 | kg |
| 3 | 2 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) | |||
| 4 | 2.01 | Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) | Item 2 | 130 | kg |
| 5 | 3 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge. | |||
| 6 | 3.01 | Pre-laminated particle board with decorative lamination on both sides | Item 3 | 185 | Sqm |
| 7 | 4 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. | Item 4 | 6 | Each |
| 8 | 5 | Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. | |||
| 9 | 5.01 | Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar | Item 5 | 12 | Each |
| 10 | 6 | Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. | Item 6 | 6 | Each |
| 11 | 7 | Providing and fixing anodised aluminium grill 5mm thick (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing partition frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). | Item 7 | 45 | kg |
AI Tender Summary
Tender Timeline
Jan 30, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 15, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 19, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender