}

Tender For External Electric Work For Construction Of Amusement Water Park At Bhagwati Nagar Jammu Under Pmdp-1, BHAGWATI NAGAR-Jammu And Kashmir

Department Of Tourism has published Tender For External Electric Work For Construction Of Amusement Water Park At Bhagwati Nagar Jammu Under Pmdp-1. Submission Date for this Tender is 07-02-2020. Electrification Work Tenders in BHAGWATI NAGAR Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

23432821
Tender For External Electric Work For Construction Of Amusement Water Park At Bhagwati Nagar Jammu Under Pmdp-1
Open Tender
Indian
Jammu And Kashmir
BHAGWATI NAGAR
07-02-2020

Tender Details

Tender For External Electric Work For Construction Of Amusement Water Park At Bhagwati Nagar Jammu Under Pmdp-1

Key Value

Document Fees
INR 3500 /-
EMD
INR 79900.0 /-
Tender Value
INR 79.90 Lakhs /-

BOQ Items

Name of Work: External electric work for construction of Amusement Water Park at Bhagwati Nagar Jammu under PMDP
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Design fabrication, erection and commissioning of 9 mtrs long Octagonal high Mast system, hot dip galvanized with bottom dia 360mm, top dia 150mm, thickness not less than 5mm complete with all accessories. Mast shaft shall be in single section, Hot dip, galvanized and suitable for wind velocity as per IS: 875 part 2 Make Paruthi Engineers Crompton/Phillips.\na) Head frame for Mounting 6 Nos of 120 Watt  LED fixtures, steel wire rope 6mm dia, double drum winch lantern carriage suitable for 6 LED  luminaries  symmetrically  including control gear boxes and lighting final with all accessories 01 set.\nb) Providing  and  laying  in  position  1:2:4 reinforced cement concrete foundation of size 1 mtr (L) x 1 Mtr wide and 2 mtr deep i.e. excavation  of  earth,  providing,  cutting, bending and placing in position reinforcement of cold twisted bars of 12mm dia, 2100 mm long (approx) 10 Nos and reinforcement ring of cold twisted bar of 8 mm dia 4100 mm   (approx) 13 Nos. (with 150mm spacing) as required with positioning of foundation bolts (as per item above) as shown in the ltem  above and providing 90mm (OD) DWC, HDPE pipe for cable entry and exit as required.) \n c) Supplying and fixing 6 Nos 25mm dia x 750mm long GI foundation bolt (EN8 grade) with nuts, washer including 2 Nos template of 4mm thick size 540x540mm with 6 Nos 28mm dia holes to match with octagonal high mast base plate as required. \nd) High powered non reversible power tool complete with all accessories 01 set e) Aviation obstruction lighting system complete 1 set (Each high Mast) Supply, erection and commissioning of 4 way LT control panel in IP 54 construction along with 1 No of time switch and 1 No of 63 Amp 4 Pole, 15 KA MCCB and 1 No of 63A, 3 Pole modular contactor with all accessories 2 sets Item (a to f) = 01 Job, Complete as per the instructions of Engg. Incharge BI01010001010000000000000515BI0100001113 4 Job
2 2 SITC of 120 watt LED flood light luminaries with minimum lumen output 10000 Lm or better with efficacy 801mwatt or better with powder coated die cast aluminium housing in opal finish and IP66 protection with 6000 k color temp with all necessary accessories required for connection. Make Philips, Bajaj, Wipro. 24 No
3 3 SITC  of 3 phase 100 KVA liquid cooled diesel generator (DG) set with following technical specifIcations: Nominal  rated  capacity(KVA):100KVA  Three phase, liquid cooled, Electronic Governor, 1500 RPM  of  Engine,  AMF controlled panel.  1.6 Millimeter thick sheet, 4 No of cylinder, 4 Number of  Strokes,  specific  fuel  consumption  of 219.1(gm/kwh), starting voltage 12 Volt, 0.8 power factor. 92.8 efficiency at 75% of full load on rated power factor, Brushless alternator, thickness of foam 50mm, 75dB noise level at 1 meter, battery of 88 Ah DG set must meet requirement of environment protection  rules 1986, in respect of Noise and emission norms, 2 Years warranty. KIRLOSKAR , SUDHIR, ELECTRIFIELD. 1 No
4 4 Earthing with cooper earth plate of 600 mm X 600 mm X 3 MM Thick including acessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 mtr long etc with coke/charcoal and salt as required including digging and re-filling as per the instructions of Engg. Incharge. 6 No
5 5 Providing and laying of cement concrete of 1:2:4 (1 Cement:2 Sand:4 aggregate stone) curing complete of sixze 3 metr X 3 mtr X 1.5 mtr = 13.5 Cubic meter. 13.5 Cum
6 6 Supply, installation, testing and commission of 400 KVA Distribution Sub-station with following items:\n11/0.433 KV, 400 KVA, DYN11, ONAN, COPPER WOUNDED, 3 Phase, Distribution transformer with Bimetallic Terminal connectors, ENERGY EFFICIENCY LEVEL-11 AS PER IS:1180 (PART-1): 2014, 3 Nos, 9 KV Lightening arrester, 1 set of 11 KV Gang operated switch, 1 set of 11 KV Dropout fuse, 2 Nos of 9 mtr Long ST Pole, 3 No of 11 KV Disc Insulator with fittings, 110 kgs of GI Channel/Angle/Flat of sizes including clamps, 3 Nos of earthling of sub-station by pipe earthlings of 1.8 mtr long GI Pipe of dia 40 mm and 5 kg of salt and 5 kg of coal, GI Pipe must be perforated type, 20 Nos of GI Strip for earthing, 1 No of transformer Pad, 3 Nos of 11 KV Pin insulator, 1 No of LT Distribution box with Mounting for 400 KVA DTR with MCCB on 3 outgoing circuits, 2 set of HT stay set complete with stay wire clamps nuts and bolts, guy insulators and concreting, 6 Nos of wedge connectors, 2 No of 11 KV Danger plate with clamps, 5 Kgs of GI barbed wire for anti climbing, 2 Nos of earthing set complete (earth Rod of 1.8 mtr long with GI Wire for earthing of T Poles and fittings), 1 No of metre box with Resin cast ring type CTs for DT metering with modem, 2 Nos of cement bottoming 2 litre of red oxide, 2 litre of aluminum paint, 1 LS Sundry items like aluminum lugs, jumpers, blinding tape, 1 No current transformer etc BEFORE SUPPLY FACTORY INSPECTION OF MATERIAL IS MANADATORY AND ALL THE TECHNICAL TEST CERTIFIED, GURANTED TECHNICAL PARTICULARS TO BE SUBMITTED BEFORE INSTALATTION, WARRANTY 05 YEARS AFTER THE CHARGING OF LOAD ELECTRIFIELD, CONTINENTAL, OSWAL, HIGHTECH\n 1 Job
7 7 Providing and fixing of single Core armourned 120sq mm PVC sheathed XLPE Aluminium to be laid under ground cable in HDPE pipe as required. HAVELS,ANCHOR,KEI 700 MTR
8 8 Providing and fixing of single core armoured 70 sqmm PVC sheathed XLPE aluminium cable cre to be laid underground in HDPE pipe as reqired , HAVELS,ANCHOR,KEI 100 MTR
9 9 Providing and fixing of jointing kits of 500 ampere capacity. 2 No
10 10 Providing and fixing of jointing kits of 300 ampere capacity. 2 No
11 11 Supply and erection of 7 metre long steel tubular poles, including base plate of 270x270x6mm welded firmly with base of the pole. The pole shall be planted in a pit of 5 ft in depth including its digging and filling back the pit with cement concrete 1:3:6 ratio underground and raising it above ground 1’-6” height and the pole shall have suitable holes drilled at convenient places for drawing in wire, JINDAL, SURYA PRAKASH, OSWAL 10 No
12 12 Supply and fixing single bracket for mounting the luminaries on the top of pole fabricated out of 0.91 mtr long 50mm dia MS pipe either welded or fixed with bolts on a suitable piece of cylindrical pipe at 105 degree with provisions of iron cap and 4mm sheet gasset plate welded with the horizontal and vertical pipe on the both sides of the plate (two way) Jindal, Surya) 10 No
13 13 SITC of street light luminaries of LED light of 50 watt (Bajaj, Syska, Havells) 10 No
14 14 SITC of XLPE, PVC sheathed armoured aluminum cable to be laid underground in HDPE pipe of 2.5”dia , 16sqmm 4 core 1100volt, aluminum cable. 50 MTR
15 15 Providing and fitting of thimbles for 16sqmm 4 core cable of 64 Ampere capacity HAVELLS,ANCHOR,KEI. 50 No
16 16 Providing and fixing of MS junction box on the pole at suitable height from the ground with suitable size clamps and grounding the junction box in upper ground 10 No
17 17 Providing of service and earthing to luminaries from the junction box in 1.5 sqmm\n copper wire. 1000 MTR
18 18 SITC of machine fabricated LT feeder panel outdoor type rain proof having input 2 No. 63 Amp TPN 4 phase bus bar and number of MCB single pole of required capacity. The feeder shall be duly painted with front opening and locking arrangement and further be provided withday light control contactor, volumeter, ampere meter, selector switch, indicator lamp for grouting of the 4 legs angle iron frame including with item. 2 Job
19 19 Supply, installation, testing and commissioning of outdoor/indoor (as per site requirement) panel board machine fabricated having separate partition to accommodate 4 strip bus bar for transformer LT,DG set, consisting of MCCB, change over TPN of following specification. The panel shall be fitted with voltmeter, Ampere meter, selector switch, indicator lamps, the panel shall be grouted in floor at suitable height through iron stand bolted to the panel bottom at four corner (Havells.Legrand as per ISI Mark). Size of the Panel 5 X 4 Sq Mtr 1 No
20 20 Providing and fixing of MCCB of 25o Amp 4 Pol in panel board including thimbles\n (Anchor/Havells Legrand) 2 No
21 21 Providing and fixing of online change over switch of 4 pole 300 Amp in panel board, including thimbles, (Anchor,/Havells/Legrand) 2 No
22 22 Supply and erction of ornamental modulated cast iron bolt 3 mtr high duly painted with anti-coarsine enamel paint. The pole shall have built in 3 wire gear box at the bottom with connector and two numbers 1:10 AMP MCB (Legrant). The pole shall have to be installed pre laid concrete block of ratio 1:2:4 (CEMENT:SAND: AGGREGATED STONE). The pole shall be suitable for installation of two way arm bracket for mounting the luminories (excluding the cost of concrete block). H-Lite Homodec 60 No
23 23 Providing and filling of ornamental casted double way arm bracket for luminaries with ornamental glove 60 No
24 24 Providing of cement concrete block 1:2:4 (CEMENT:SAND: AGGREGATED STONE) one feet underground and 6 Inch above GI with DIA upto 1.5 Inch including grouting 4 Nos of foundation bolt. 60 No
25 25 Supply fixing and testing of decorative ornamental translucent luminories field with 35 watt Led Bulb (Havels, nchor) 120 No
26 26 Supply, Fixing, Testing, Installation and comissioning of XLPE PVC Sheathed 10 Sqmm 4 Core Aluminium armoured cable 1500 MTR
27 27 Providing of service connection and earthing to luminories, junction marks in 1.5 Sq mm PVC insulated single core flexible bright anmealed copper conductor 630 MTR
28 28 Supply and instalation of spiral earthing through 10 SWG GI Wire after driving in ground upto a depth of 3" in the ground from the base of pole 85 No
29 29 Supply and laying of G.I 1.5 Inch Dia at road crossing 200 RFT
30 30 Providing and Fixing of MCCB of 300 AMP 4 Pole 3 No
31 31 Providing and Fixing of MCCB of 10 Amp Pole 5 Nos
32 32 Providing and Laying of 95 SQMM Single Core XLPE PVC Sheathed Armoured Cable 600 MTR
33 33 Providing and fixing of LED Bollards with Opal Acrylic diffuser and IP6S Protection (Bajaj, Havels) 25 No
34 34 Providing and laying of 25 SQMM XLPE, PVC, Sheathed Armoured Cable 3.5 Core 500 MTR
35 35 Providing and Fixing of MCB (Double Pole) 32 Amp 10 No
36 36 Providing and Fixing of TPN 63 Amp 6 No
37 37 Providing and fixing outdoor Panel board machine fabricated having separate partition to accommodate 3 strip bus bar for accomodating T.P.N and M.C.B Size of Panel is 2 Ft X 1 Ft 6 No
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail