Renovation Of Ottappalam Showroom Municipal Shopping Complex Building Near Private Bus Stand Ottappalam Railwaystation Palakkad District
Tender Value
14.75 Lakhs
Estimated cost
Bid Submission
05 Feb 2020
0 days left
EMD
15000
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Municipal Shopping Complex Building Ottappalam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Of Ottappalam Showroom Municipal Shopping Complex Building Near Private Bus Stand Ottappalam Railwaystation Palakkad District
BOQ
| Name of Work: RENOVATION OF HANVEEV SHOWROOM OTTAPPALAM | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | CIVIL WORKS & INTERIOR & EXTERIOR FACE LIFT WORKS | |||
| 2 | 1.01 | Man Mazdoors for clearing and removing the debris and other scattered wastes and other articles from the site, including stacking the serviceable items under safe custody and disposing the debris far away from the site as per the direction of the site in charge | BI01010001010000000000000515BI0100001113 | 2 | Nos |
| 3 | 1.02 | Providing and laying in position cement concrete of specific grade including the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001114 | 3 | Mtr 3 |
| 4 | 1.03 | Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for Superstructure with thickness 15cm for toilet walls and 20cms for main walls in: CM 1:6 ( 1 cement :6 coarse sand) etc complete\n7.00\n | BI01010001010000000000000515BI0100001199 | 12 | Mtr 3 |
| 5 | 1.04 | Plastering with CM. 1:4, 12 mm thick finished including all cost and hire for scaffolding etc., complete as per the direction of the site in charge | BI01010001010000000000000515BI0100001115 | 127 | Mtr Sqr |
| 6 | 1.05 | Providing and laying vitrified floor tiles 600 x 600mm or in different sizes as directed by the site in charge (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete | BI01010001010000100000000515BI0100001116 | 43 | Mtr Sqr |
| 7 | 1.06 | Providing and fixing at all heights false ceiling of 12.5mm thick tapered edge gypsum board confirming to IS 2095 including providing and fixing of frame work made of special sections power pressed from M.S sheet and galvanised in accordance with zinc coating 600 as per I.S 277 and consisting of angle cleats of size 25mm and 1.6mm thick with flanges of 22mm and 37mm duly fixed at 1200mm centre to centre, one flange shall be fixed to the ceiling with dash fastener of 12.5mm dia x 40mm long with 6mm dia bolts to the angle hangers of 25mm x 25mm x 5mm of required length, and the other end of the angle hanger being fixed with nuts and bolts of G.I channels 45mm x 15mm x 0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I channel with connecting clips made out of 2.64mm dia x 230mm long GI wire at every Junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long – The perimeters of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the gypsum boards with recommended filler, paper tapes, finisher, and two coats of primer suitable for gypsum boards as per manufacturers specification and also including the costs of making openings for light fittings, grills, diffusers, cutouts etc., made with frame of perimeter channels suitably fixed all complete as per drawing, specification and direction of consultant including cost and labour for painting the surface two or more coat with synthetic enamel paint, hire charges for scaffolding etc., complete. | BI01010001010000200000000515BI0100001116 | 32 | Mtr Sqr |
| 8 | 1.07 | Finishing the perimeters, corners and edge of the false ceiling work at the junction of walls and ceiling by providing architectural moulding works of 150mm x 150mm size in aesthetic design at not less than three steps per each haunge as per approved design with Plaster of Paris (POP) as per direction including cost and labour for painting the surface in two or more coat with synthetic enamel paint of approved colour and brand etc., complete | BI01010001010000300000000515BI0100001116 | 25 | Mtr |
| 9 | 1.08 | Supplying, fabricating and fixing a projected canopy work with M.S Squares tubes of designed size as a barrier for providing ACP work in front of the showroom so as to cover the full frontage of not less than 0.50m wide and 1.20m depth from roof level. The canopy shall be fabricated as per the approved design using M.S Tubular sections viz 40mm x 20mm 16 guage or other equivalent sections including all cost and labour for cutting, welding, fixing the frame to walls/R.C.C columns and beams with anchor bolts, making holes to walls and concrete structures for fixing the canopy and made good the holes with concrete after the errection of frame, painting the canopy frame work with two coats of Synthetic enamel paint over a coat of iron primer complete as per the direction of the consultant | BI01010001010000400000000515BI0100001116 | 300 | Kg |
| 10 | 1.09 | Providing and fixing at all heights false ceiling of 3mm thick PVC rigid form sheet manufactured by reputed firms viz M/S. Rajshri or equalent including providing and fixing of frame work made of special sections power pressed from M.S sheet and galvanised in accordance with zinc coating 600 as per IS-277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm dia x 40mm long with 6mm dia bolts to the angle hanger of 25mm x25mmx5mm of required length and other and of angle hanger being fixed with nuts and bolts to G.I channels 45 x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to the G.I channels with connecting clips made out of 2.64mm dia x 230mm long G.I wire at every junction including fixing the PVC rigid form sheet with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long. The perimeter of ceiling fixed to walls with the help of rowel plugs at 450mm centre to centre with 25mm long drive all screws @ 230mm interval including jointing and fixing to a flush finish of the PVC sheet as per manufactures specification and including the cost of making opening for light fittings, grills, diffusers, cut outs made with the frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of consultant | BI01010001010000600000000515BI0100001116 | 12 | Mtr Sqr |
| 11 | 1.1 | Providing and fixing 1st quality ceramic glazed wall tiles confirming to IS-15622 of thickness not less than 6mm, of approved make size, colour and shade as approved by the Engineer in charge in dados over 12mm thick bed of cement mortar 1:3 (1 cement 3course sand) and jointing with gray cement slurry @ 3.30Kg/Sqm. Including pointing in white cement mixed with pigment of matching shade etc., complete | BI01010001010000700000000515BI0100001116 | 10 | Mtr Sqr |
| 12 | 1.11 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work Front Wall, inside, toilet & Store | BI01010001010008100000000515BI0100001116 | 165 | Mtr Sqr |
| 13 | 1.12 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work-Arolling Shutters & top Cover | BI01010001010000900000000515BI0100001116 | 79 | Mtr Sqr |
| 14 | 1.13 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer in- charge 9.117.1 Extruded section profile size 48x40 mm-vERTICAL & hORIZONTAL | BI01010001010000000050000515BI0100001116 | 6 | Mtr |
| 15 | 1.14 | Providing and fixing to existing door frames \n24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (±0.2 mm) with inbuilt edging on both sides. The styles and rails mitred screws. The styles of the shutter reinforced by inserting galvanized M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of\nEngineer-in-charge. (For W.C. and bathroom door shutter).and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel.\n | BI01010001010000000000001515BI0100001116 | 1.5 | Mtr Sqr |
| 16 | 2 | INTERIOR FURNISHING WORKS | |||
| 17 | 2.01 | Design, fabricating supplying and fixing low level sale counter of 70cms wide and 80cms height above the floor level as per the approved lay out plan, specification and direction of the consultant. The sale counter shall be fabricated at site by using 18mm thick 9 ply marine plywood manufactured by reputed firms and confirming to ISI brand and duly pre approved by the authorities and having one intermediate storage compartments between the top and middle planks of the counter. The top of the counter shall be fixed by means of brass/ SS screws with 18mm thick 9 ply 70cms wide marine plywood placed vertically at one meter centre to centre and finishing the counter top with 2mm or nearest available thick laminations of approved colour design and brand using synthetic resin. The exposed faces at front and side shall be decorated with T.W beadings and panels to make it most attractive and aesthetic and all other exposed faces are to be painted two or more coat with synthetic enamel paint. All the joints and edges of the frame work shall be lipped and rounded off with Teak/rose wood beading including all cost and labour for providing ornamental groves, broadering, nosing, cornicing, providing flap doors made of 12mm thick marine ply wood etc., complete. | BI01010001010000045000000515BI0100001125 | 10 | Mtr |
| 18 | 2.02 | Design fabricating, supplying and fixing high level cash counter of 60cms wide at top and 110cms height above the floor level and arranged in L-shape having a total length of not less than 1.50m. The cash counter so fabricated shall be provided with one drawer, one cupboard and one pullout Key board for computer operation, all hardware fixtures, locking arrangements etc., accessories and as per approved lay out plan, specification and direction of the consultant. The cash counter shall be fabricated at site with 18mm thick 9 ply marine ply wood of reputed companies and confirming to ISI designation and framed with 60cms wide marine plywood boards for top and 60cms wide boards for verticals placed at required intervals to have the design shape and fixed with brass or stainless steel screws. The top of the cash counter shall be finished with 18mm thick granite slab of chilly red or Ruby red colour. The front and other exposed faces at ends shall be paneled with T.W and finished to aesthetic appearance with architectural moldings cornice works beading etc., including cost and labour for rounding of the edges and corners with Teak/rose wood lippings, painting the other exposed inner faces with 2 coats of Synthetic enamel paint over a coat of wood primer etc., complete. | BI01010001010008100000000515BI0100001125 | 2.5 | Mtr |
| 19 | 2.03 | Supplying fabricating, providing and fixing cloth racks of matching pattern of the Sale counter and cash counter and having 40cms depth and about 250cms height arranged in above the floor level at the rate of 5 steps in each rack including bottom fixed at 60cms to centre duly bifurcated with vertical boards placed at 100cms C/C or as per the site condition, direction of the consultant. The cloth rack so designed shall be fabricated and formed by using 1st class ISI approved 19mm thick 9 ply marine ply wood manufactured by reputed firms like century, kits etc., Each compartment of the racks shall be provided with 4mm thick plain glass sliding shutter fixed in 2 run brass rails with rollers. The top and bottom of the cloth racks shall be provided with decorative Teak wood ornamental mouldings with cornice works of pleasing appearance as directed by the consultant. All the front exposed ends, joints and corners of the ply wood shall be finished with Teak wood/rose wood beading and all other faces both inside, outsides, top etc., shall be finished with two or more coat white colour Synthetic Enamel paint of approved brand and all the cloth racks in the showroom shall be interconnected without leaving any gaps so as to have an homogeneous and single piece appearance and firmly fixed to the walls using rowel plugs, steel screws etc., complete as per direction of the consultant-South Sidem, East & Store Room | BI01010001010000023.000000515BI0100001125 | 40 | Mtr Sqr |
| 20 | 2.04 | Supplying and providing full height glass partition wall in front of the showroom using 12mm thick toughened plain glass of reputed brand and fixing to the floor and roof by providing Heavy duty powder coated Aluminium frames at bottom and top as per direction | BI01010001010004500000000515BI0100001125 | 23 | Mtr Sqr |
| 21 | 2.05 | Supplying and providing glass doors in front of the Showroom using 12mm thick toughened plain glass of reputed brand and fixing in position by providing pivots and heavy duty Aluminium or S.S frame work at top and bottom including all cost and labour for providing architectural design works in the glass, floor springs, hinges, 30cms long C.P brass handless on both side, pivots etc., complete-DOOR | BI01010001010000066000000515BI0100001125 | 3 | Mtr Sqr |
| 22 | 2.06 | Supplying and providing an openable hinged door of 100cms x 200cms size connecting the two adjacent cloth rack erected on the back side of the showroom so as to have an entry to the store room provide at back side3. The door shall be made of 9mm thick 9 ply marine ply wood and the front shall be fully covered by fixing 5.50 mm thick mirror by using Synthetic resin and brass screws and side furnished with T.W leadings etc., including cost and labour providing all essential hardware handles and painting the exposed faces with synthetic enamel paint two or more coat over a primer etc., complete as per direction. | BI01010001010007700000000515BI0100001125 | 2 | Mtr Sqr |
| 23 | 2.07 | Supplying fabricating and erecting a display cum Exhibition chamber of 1.50m x 0.80m floor space having 2.5M height inside the showroom facing entry side near glass partition wall which shall be mounted on a plat form made about 30cms above floor level of the show room using 19mm thick 9 ply marine ply wood for bottom, back sides and top and one side shall be openable by providing proper hinges, Tower bolts, locking arrangements etc., and painting two or more coat over a priming coat to all the exposed faces with Synthetic enamel paint of approved colour and brand, making provision for providing spot lights, exhibiting display goods inside the chamber etc., as per specification. | BI01010001010000088000000515BI0100001125 | 1 | Nos |
| 24 | 2.08 | Supplying, providing and erecting reflective name board of approved uniform design for Hanveev as per the strict direction of the authorities. The designated letters moulded in 304 grade (22 gauge stainless steel both in Malayalam and English with the pattened logo of Hanveev shall be inserted to the ACP work by means of 3mm SS bolts at the rate of not less than 4 bolts for big letters and 2 nos in the case of small letters including all cost and labour for fixing the letter in position to lines and level bire and labour for scaffolding, providing and fixing reflective stickers of the approved colour on letters etc., complete | BI01010001010000000000740515BI0100001125 | 10 | Mtr Sqr |
| 25 | 2.09 | Supplying fabricating and providing flap doors at the entrance of sale counter and of size not less than 50cms x 60cms size. The doors shutter shall be fabricated using 12mm thick marine fly wood duly framed with 37mm x 25mm teak wood framed work alround the shutter including all cost and labour for providing piano types brass hinges, powder coated aluminium, Tower bolts of 150mm size, applying two coats of synthetic enamel paints 2 coats over a priming coat etc as per direction | BI010100010100000000000120515BI0100001125 | 2 | Nos |
| 26 | 3 | REWIRING AND PROVIDING ELECTRICAL FITTINGS Supplying and wiring points with due provision for connecting the line with the terminal of Invertors for restoring the power automatically at the time of power failure as the case may be according to IS 732-1989 using rigid PVC conduit of minimum size 20mm conforming to IS 9537 part III 1983 with suitable size specials conforming to IS 3419-1988 fixing the conduit using metal saddles spacing not exceeding 50cm or concealed suitably and with 1.00sqmm or 1.5Sq.mm according to connected powerboads. FR PVC insulated stranded single core copper conductor cable 650V grade, and continuous earthling with 1.5sq.mm green colured FR PVC insulated stranded single core copper conductor cable 650V grade, generally conforming to IS 694-1990, complete with suitable size modular type metal switch boxes, modular type front plates (white or off white) etc. upto and including cost of providing 6A modular type SP switches and making good the surface of wall, colour washing etc, complete. All the terminations in the switch boards and DBS shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. ( Group.B modular accessories) | |||
| 27 | 3.01 | Single control light point with 6A 3 plate ceiling rose | BI01010001010000000045600515BI0100001125 | 8 | Nos |
| 28 | 3.02 | Single control light point without ceiling rose | BI01010001010000000000546515BI0100001125 | 3 | Nos |
| 29 | 3.03 | Single control ceiling fan point with 6A, 3 plate ceiling rose and with socket size stepped electronic regulators | BI01010001010000012340000515BI0100001125 | 4 | Nos |
| 30 | 3.04 | Combined plug point with 6A. 5 pin plug socket controlled by 6 A switch in the same switch board as that of light points | BI01010001010000000348000515BI0100001125 | 2 | Nos |
| 31 | 3.05 | Single control fancy light point with all accessories duly fixed on false ceiling LED ornamental spot lights at the rate of 6 lights controlled by one switch. | BI01010001010000000000987515BI0100001125 | 2 | Set |
| 32 | 3.06 | Supplying and providing single control A.C point including cost of wiring as per the detailed specification of item No.1 above using 4sq.mm PVC insulated stranded single core copper conductor cable 650V grade and continuous earthing with2.5sq.mm green coloured F1 PVC insulated single core copper conductor cable 650V grad etc., as per standard specification. | BI01010001010000000000990515BI0100001125 | 1 | Nos |
| 33 | 3.07 | Supplying conveyance installation testing and commissioning of prewired florescent fittings of 1200mm x 50 Watts type complete with electronic choke, starter and fluorescent tube etc., directly on wall or ceiling with T.W roud block nearly painted to suit the fitting and giving connection with required length of 16/0.2mm 3 core copper conductor flex wire confirming to relevant ISS and giving connections etc., complete | BI01010001010000000000440515BI0100001125 | 4 | Nos |
| 34 | 3.08 | Supplying conveyance, installation testing and commissioning of prewired Angle batten fitting with 180mm dia LED A.C False ceiling down LED lights 15 watt of approved brand having U.L certification and NMRE approval with 3 years warranty etc., as per direction. | BI01010001010000000033000515BI0100001125 | 15 | Nos |
| 35 | 3.09 | Supplying conveyance installation testing and commissioning of ceiling fans of 1200mm sizes using standard accessories excluding resistant type regulator, wiring the down rod with 16/0.2mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flux wire or with extended original wiring etc., as directed by the consultant. | BI01010001011200000000000515BI0100001125 | 4 | Nos |
| 36 | 3.1 | Supplying and installation of sheet steel phosphatised and painted, dust and vermin proof enclosure for MCBDB including copper/brass bus bar neutral link, earth bus bar and DIN rail suitable for fixing MCB/isolator etc., which are essencially required for the DB, fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall, making good the damages, colur washing etc., as required. (Group A) | BI01010001010000147800000515BI0100001125 | 1 | Nos |
| 37 | 3.11 | Supplying and proving plate Earthing as per IS 3043 with 600 x 600 x 6.3mm G1/C1 earth plate, 20mm GI watering pipe, duly fixed to the GI plate using 20mm x 3mm GI clamps, GI funnel with weld mesh filling required quantity of charcoal including construction of inspection chamber of not less than 300mm x 300mm x 300mm inside measurements, duly constructed in 10cms thick brick work in C.M 1:6 and laid over 10cms thick a bed concrete of 1:4:8 mix concrete using 40mm broken stone, plastering both sides of masonry and top of P.C.C with C.M, 1:4, 12mm thick etc., but excluding test joint, earth continuity, conductor to the plate and providing R.C.C covering slab, filling the pit by ordering soil etc., complete. | BI01010001010000000009000515BI0100001125 | 1 | Nos |
| 38 | 4 | INTERNAL WATER SUPPLY AND SANITARY WORKS | |||
| 39 | 4.01 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid | BI01010001010000000000000515BI0100001177 | 1 | Nos |
| 40 | 4.02 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps | BI01010001010000000000000515BI0100001178 | 1 | Nos |
| 41 | 4.03 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms | BI01010001010000000000000515BI0100001179 | 1 | Nos |
| 42 | 4.04 | Supplying and providing C.P long body water taps of superior quality brand and make of wight not less than 450 grams per tap Including all cost and labour for fixing etc as per direction | BI01010001010000000000000515BI0100001180 | 1 | Nos |
| 43 | 4.05 | Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. | BI01010001010000000000000515BI0100001181 | 1 | Set |
| 44 | 4.06 | Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. | BI01010001010000000000000515BI0100001182 | 1 | Nos |
| 45 | 4.07 | Supplying and providing 110mm dia silt trap with hinged PVC cover including all cost and labour for fixing to the toilet floor as per direction | BI01010001010000000000000515BI0100001183 | 2 | Nos |
| 46 | 4.08 | Constructing Man Hole chamber of inner dimension 45cms x 45cms and up to 60cms depth with half brick walls in C.M. 1:4 alround over 15cms thick foundation bed formed of 1:4:8 mix concrete using 40mm broken stone, plastering with cement mortar 1:3, 12mm thick with neat flushing coat to both inside and outside etc. complete including providing 8 cms thick covering slab with C1man hole cover of not less than 35Kg by weight and fixed over the R.C.C slab by M.S Angle frame work and painted with black paint etc. complete. | BI01010001010000000000000515BI0100001184 | 3 | Nos |
| 47 | 4.09 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC Solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 110 mm pipe 4 kgf/cm2 | BI01010001010000000000000515BI0100001185 | 30 | Mtr |
| 48 | 4.1 | Supplying and providing 110mm PVC specials of approved quality and brand viz brands elbows, tees coupling etc. where ever necessary as per direction | BI01010001010000000000000515BI0100001186 | 10 | Nos |
| 49 | 4.11 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 20 mm pipe 10 Kgf/ cm2 | BI01010001010000000000000515BI0100001187 | 30 | Mtr |
| 50 | 4.12 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 10 Kgf/cm2- Internal work- exposed on wall | BI01010001010000000000000515BI0100001191 | 20 | Mtr |
| 51 | 4.13 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Circular tank per liter 7.25 | BI01010001010000000000000515BI0100001192 | 500 | Litre |
| 52 | 4.14 | 20 MM Water Metre | BI01010001010000970000000515BI0100001192 | 1 | Nos |
AI Tender Summary
Tender Timeline
Jan 29, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 05, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 07, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender