Construction Of One Staff Center ( Sakhi Aasha Jyoti Kendra ) At Campous Of Cmo Office Farrukhabad In Distt . Farrukhabad
Tender Value
48.69 Lakhs
Estimated cost
Bid Submission
04 Feb 2020
0 days left
EMD
98000
Bank guarantee accepted
Document Fee
2240
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
FARRUKHABAD → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of One Staff Center ( Sakhi Aasha Jyoti Kendra ) At Campous Of Cmo Office Farrukhabad In Distt . Farrukhabad
BOQ
| Name of Work: tuin Q:Z[kkckn es eq[; fpfdRlk vf/kdkjh dk;kZy; ifjlj es ou LVki lsUVj ¼l[kh vk'kk T;ksfr dsUnz½ dk fuekZ.k dk;ZA | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | EXCAVATION in foundation in ordinary Soil ( Loam clay or sand ) including lift upto 1.5m lead upto 30.0 m & including filling watering and ramming of excavated earth into the space between the building & sides of foundation trenches or into the plinth and removal & disposal surplus earth as directed by the engineer I/C within a lead of 30 m.from foundation trenches. | BI01010001010000000000000515BI0100001114 | 111.08 | Cum. |
| 2 | 2 | EXCAVATION in foundation in ordinary Soil ( Loam clay or sand ) including lift upto 1.5m lead upto 30.0 m & including filling watering and ramming of excavated earth into the space between the building & sides of foundation trenches or into the plinth and removal & disposal surplus earth as directed by the engineer I/C within a lead of 30 m.from foundation trenches. \nSame as item above but for earth brought from out side. | BI01010001010000000000000515BI0100001115 | 39.8 | cum |
| 3 | 3 | SAND Filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8.00Kms. From the site of work including watering, dressing etc. labour & T &P etc. required for proper completion of work saplings of girth upto 30 ground level and removal of rubbish upto a distsnce of 50m out side the periphery of area cleared. under floor Local sand | BI01010001010000000000000515BI0100001116 | 19.55 | cum |
| 4 | 4 | Providing and laying Cement concrete 1:4:8 (1cement :4 coarse sand :8 graded stone aggregate 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation. | BI01010001010000000000000515BI0100001117 | 18.84 | Cum. |
| 5 | 5 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) | BI01010001010000000000000515BI0100001118 | 24.34 | sqm. |
| 6 | 6 | Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. | BI01010001010000000000000515BI0100001119 | 24.34 | sqm. |
| 7 | 7 | R.C.C. work with cement, c.sand and 2 cm gauge approved S. B. in the proportion 1:1.5:3 ( 1 cement: 1.5 c.sand : 3 agg. 20mm normal size ) for Foundation & Footing ,Raft M-20 | BI01010001010000000000000515BI0100001120 | 28.07 | cum |
| 8 | 8 | R.C.C. work with cement, c.sand and 2 cm gauge approved S. B. in the proportion 1:1.5:3 ( 1 cement: 1.5 c.sand : 3 agg. 20mm normal size ) for lintel M-20 | BI01010001010000000000000515BI0100001121 | 3.66 | Cum |
| 9 | 9 | R.C.C. work with cement, c.sand & 2cm gauge approved S.B. in the proportion 1:1.5:3 (1 cement: 1.5 c.sand :3 agg. 20mm normal size) for slabs | BI01010001010000000000000515BI0100001122 | 27.02 | cum |
| 10 | 10 | R.C.C. work with cement , c.sand & 2 cm gauge approved S. B. in the proportion 1:1.5:3 ( 1 cement: 1.5 c.sand :3 agg. 20mm normal size ) in lighter beams i.e. having spans upto 6 metres. | BI01010001010000000000000515BI0100001123 | 21.56 | cum |
| 11 | 11 | R.C.C. work with cement , c.sand & 2 cm gauge approved S. B. in the proportion 1:1.5:3 ( 1 cement: 1.5 c.sand :3 agg. 20mm normal size ) in Column. | BI01010001010000000000000515BI0100001124 | 13.19 | cum |
| 12 | 12 | Mild steel or iron in plain work such as reinforcement concrete or reinforced brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and incl. supply of all steel and wastage & over lapping & hooks | BI01010001010000000000000515BI0100001125 | 109.15 | qtl. |
| 13 | 13 | Class 150 brick work in 1 : 6 cement & coarse sand mortar in foundation and in plinth including necessary cutting and moulding as required for proper completion of the work. | BI01010001010000000000000515BI0100001126 | 15.22 | Cum. |
| 14 | 14 | Class 150 brick work in 1 : 6 cement & coarse sand mortar in super structure incl. necessary cutting and moulding of one brick work as required for proper completion of the work. | BI01010001010000000000000515BI0100001127 | 25.61 | Cum |
| 15 | 15 | Class 150 brick work in but in 1 : 4 cement & coarse sand mortar for wall thickness 115 cm. and below, upto two floors. | BI01010001010000000000000515BI0100001128 | 38.68 | cum. |
| 16 | 16 | Proving & injecting chemical emulsion for preconstructional anti-termite treatment and creating a chemical barrier under & alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall & floor along the external perimeter of building expansion joints surrounding of pipes & coduits etc.complete ( plinth area of the building at ground floor only shall be measured as per I.S.6313 part II 1981 ) Aldrine emlsifiable concentrate or any other approved material such as Heptachlor or Chlordance will be used . The rate of application of chemical emulsion shall be as follows: \n(V) Treatment of soil under Apron along external perimeter 6 litres/sqm | BI01010001010000000000000515BI0100001129 | 147.61 | sqm |
| 17 | 17 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :\n 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws Double leaf SI No 470 ( B+D) | BI01010001010000000000000515BI0100001130 | 2.52 | Sqm |
| 18 | 18 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws Single leaf | BI01010001010000000000000515BI0100001131 | 23.42 | Sqm |
| 19 | 19 | Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc, (when not included in an overall rates) wrought to required shape as necessary for bending etc including supply fo steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work but\nii- M.S. grill | BI01010001010000000000000515BI0100001132 | 492 | Kg |
| 20 | 20 | Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc, (when not included in an overall rates) wrought to required shape as necessary for bending etc including supply fo steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work but\niv- Z section window openable | BI01010001010000000000000515BI0100001133 | 657 | Kg |
| 21 | 21 | Mild steel or iron work of small size & sections such as holding down bolts, hold fast, tie rods, grating etc, (when not included in an overall rates) wrought to required shape as necessary for bending etc incl. supply fo steel and its wastage incl. cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work\ni Fabrication of holes, Door, Chaukhats Nosing | BI01010001010000000000000515BI0100001134 | 292.45 | KG |
| 22 | 22 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately) : Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) SI No 21.1.1.2 | BI01010001010000000000000515BI0100001135 | 432 | Kg |
| 23 | 23 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately).\n Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) SI No 21.1.2.2 | BI01010001010000000000000515BI0100001136 | 60.48 | Kg |
| 24 | 24 | Providing and fixing ACP PANEL 4 to 5 mm as per drawing & design SI No AR-3 ITEM 6 | BI01010001010000000000000515BI0100001137 | 3.51 | Sqm |
| 25 | 25 | Providing and fixing With float glass panes of 5.50 mm thickness glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) : SI No 21.3.2 | BI01010001010000000000000515BI0100001138 | 54.01 | Sqm |
| 26 | 26 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors , embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge\nWith stainless steel cover plate minimum 1.25 mm thickness SI No 21.4.1 | BI01010001010000000000000515BI0100001139 | 4 | NO |
| 27 | 27 | Providing and fixing cup board shutters with 25mm thick veneered particle board IS : 3097 marked exterior grade (Grade I) of approved make including IInd class teak wood lipping of 25mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of Engineer-in-Charge.\n With decorative veneering on one side and commercial veering on other side. SI No 9.130.1 | BI01010001010000000000000515BI0100001140 | 3.75 | Sqm |
| 28 | 28 | Fixing of steel or wooden Chaukhats in position Doors chaukhats/window chakhats above 1.5 Sq.M. | BI01010001010000000000000515BI0100001141 | 17 | NOS |
| 29 | 29 | Fixing of steel or wooden Chaukhats in position Window chaukhats more than 1.5 Sq.M. | BI01010001010000000000000515BI0100001142 | 14 | NOS |
| 30 | 30 | Fixing of steel or wooden Chaukhats in position ventilator chaukhats | BI01010001010000000000000515BI0100001143 | 6 | NOS |
| 31 | 31 | Providing Oxidized iron sliding door bolts of colour and shed with nuts and screws completion size 16 mm dia 300 mm long CH-1 ITEM 20 G | BI01010001010000000000000515BI0100001144 | 17 | Nos |
| 32 | 32 | Providing Oxidized iron tower bolts of dyed to required colour and shed with necessary screws etc. complete size 200 mm CH-1 ITEM 20 C | BI01010001010000000000000515BI0100001145 | 118 | Nos. |
| 33 | 33 | Providing Oxidized iron handle to required colour and shed with necessary screws etc. complete size 150 mm CH-1 ITEM 20 I | BI01010001010000000000000515BI0100001146 | 118 | Nos. |
| 34 | 34 | ProvidingAluminium Door stoper CH-1 ITEM 19 B (D) | BI01010001010000000000000515BI0100001147 | 8 | Nos. |
| 35 | 35 | Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with : 3.8 to 4.7 mm thick glass panes SI No 812 (b) | BI01010001010000000000000515BI0100001148 | 35.33 | sqm |
| 36 | 36 | Supply and fixing 6 mm thick approved China white/coloured glazed tiles in flooring or dado laid with 1:3 cement and approved coarse sand mortar finished and jointed with white cement slurry and pigment & polishing complete including supply of all materials, labour and T&P etc. required for proper completion of the work. SI No 628 | BI01010001010000000000000515BI0100001149 | 18.19 | sqm |
| 37 | 37 | Supply and fixing 6 mm thick approved China white/coloured glazed tiles in flooring or dado laid with 1:3 cement and approved coarse sand mortar finished and jointed with white cement slurry and pigment & polishing complete including supply of all materials, labour and T&P etc. required for proper completion of the work.xed with pigment of matching shade complete. SI No628 | BI01010001010000000000000515BI0100001150 | 81.06 | Sqm. |
| 38 | 38 | 40 mm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 20 mm graded approved stone laid in panels finished with 3mm. Flooring coat of neat cement or cement and marble dust in 5:1 as specified with out base concrete. SI No- CH-14 ITEM 8 | BI01010001010000000000000515BI0100001151 | 164.63 | sqm |
| 39 | 39 | 2 cm (3/4\") thick cement plaster in dedo or skirting in 1:3 consisting of one part of cement and 2 parts of approved coarse sand laid in panels, finished with 3 mm (1/8\") floating coat of neat cement, or cement and marble dust in ratio of 5:1 including supply of all materials, labour and T&P etc. required for proper completion of the work. SI No- | BI01010001010000000000000515BI0100001152 | 21.563 | sqm |
| 40 | 40 | 25 mm thick Kota stone slab flooring over 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid over jointed with grey cement slurry mixed with pigment to match the shade of slabs including and polishing compete. SI No 11.26.1 | BI01010001010000000000000515BI0100001153 | 3.89 | sqm |
| 41 | 41 | 12mm thick cement plaster with cement mortar in proportion of 1:6 cement & fine sand of 1.25F.M. SI No- 17.58 (iii) | BI01010001010000000000000515BI0100001154 | 673.36 | sqm |
| 42 | 42 | 15 mm thick cement plaster over rough surface of one brick wall with cement mortar in proportion of 1:6 cement & fine sand of 1.25F.M. SI No 17.59 (iii) | BI01010001010000000000000515BI0100001155 | 281.42 | sqm |
| 43 | 43 | 12mm thick cement plaster with cement mortar in proportion of 1:3 cement & fine sand of 1.25F.M. for ceiling SI No 17.58 (i) | BI01010001010000000000000515BI0100001156 | 1 | sqm |
| 44 | 44 | 15 mm thick cement plaster with cement mortar in proportion of 1:4 cement & fine sand for plinth SI NO 17.59 (ii) | BI01010001010000000000000515BI0100001157 | 35.62 | sqm |
| 45 | 45 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete SI NO 13.8 | BI01010001010000000000000515BI0100001158 | 1119.41 | sqm |
| 46 | 46 | Painting or vernishing on iron works in small areas with two coat of ready mixed priming paint and two coat of approved superior quality ready mixed paind of clear synthetic varnish including supply of all materials labour and T&P etc required for proper completion of work. SI No 641+642 | BI01010001010000000000000515BI0100001159 | 80.25 | Sqm |
| 47 | 47 | Painting or vernishing on new wood work with two coat of ready mixed priming paint and two coat of approved superior quality ready mixed paind of clear synthetic varnish including supply of all materials labour and T&P etc required for proper completion of work. SI NO 641+642 | BI01010001010000000000000515BI0100001160 | 71.26 | Sqm |
| 48 | 48 | Finishing walls with water proof cement paint of approved make and quality on new work with two coats to give an even shade. Including supply of all material labour and T & P etc required for proper completion of the work. SI No 660+661 | BI01010001010000000000000515BI0100001161 | 391.94 | sqm |
| 49 | 49 | One priming coat & Two coat oil distemper on new work including supply of all materials, labour and T& P etc. required for proper completion of the work. 649+650 | BI01010001010000000000000515BI0100001162 | 727.47 | Sqm |
| 50 | 50 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300mm height incl rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120mm and minimum thickness at khurra as 65 mm. DSR 22.7.1 | BI01010001010000000000000515BI0100001163 | 147.61 | sqm |
| 51 | 51 | Providing and fixing on wall face un plasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes. 110 mm diameter SI No 12.41.2 | BI01010001010000000000000515BI0100001164 | 16 | Rm |
| 52 | 52 | Making 900 wide Apron 25 mm thick of cement concrete 1:2:4 (1 cement:2 coarse sand : 4 graded stone aggregate 20 mm nominal size) with base concrete 1:4:8 and 22 mm glass strip complete. | BI01010001010000000000000515BI0100001165 | 60.47 | Rm |
| 53 | 53 | Construction of apron drain 150X230 mm AV | BI01010001010000000000000515BI0100001166 | 60.47 | Rm |
| 54 | 54 | Making grooves 10 to 12 mm wide x 8 mm deep in plaster the all or in ceiling vertically of horizontally as required | BI01010001010000000000000515BI0100001167 | 362.8 | Rm |
| 55 | 55 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. | BI01010001010000000000000515BI0100001168 | 4.41 | Sqm |
| 56 | 56 | SANITIARY FIXTURE & ACCESSORIES | BI01010001010000000000000515BI0100001169 | ||
| 57 | 57 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. SI No 17.1.1 | BI01010001010000000000000515BI0100001170 | 4 | each |
| 58 | 58 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. Si No 17.3.1 | BI01010001010000000000000515BI0100001171 | 1 | each |
| 59 | 59 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. Si No 17.7.4 | BI01010001010000000000000515BI0100001173 | 6 | each |
| 60 | 60 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x460 mm bowl depth 200 mm. SI No 17.10.2.2 | BI01010001010000000000000515BI0100001175 | 3 | each |
| 61 | 61 | Providing and fixing of 32 mm dia P.V.C. Flexible waste pipe for sink or wash basin including P.V.C. waste fittings complete. 17.28.2.1 | BI01010001010000000000000515BI0100001176 | 6 | each |
| 62 | 62 | Providing and fixing of 40 mm dia P.V.C. Flexible waste pipe for sink or wash basin including P.V.C. waste fittings complete. 17.28.2.2 | BI01010001010000000000000515BI0100001177 | 3 | each |
| 63 | 63 | Providing and fixing 100 mm sand cast Iron grating for gully trap. | BI01010001010000000000000515BI0100001178 | 5 | each |
| 64 | 64 | Providing and fixing of Rectangular shape 453x357mm mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : SI No 17.32.2 | BI01010001010000000000000515BI0100001179 | 6 | each |
| 65 | 65 | Providing and fixing toilet paper holder : Vitreous china SI No 17.34.2 | BI01010001010000000000000515BI0100001180 | 1 | each |
| 66 | 66 | Providing and fixing of 100 mm dia soil, waste and vent pipes : Sand cast iron S&S pipe as per IS: 1729. | BI01010001010000000000000515BI0100001181 | 45 | metre |
| 67 | 67 | Sand cast iron S&S pipe as per IS: 1729. 17.35.2.1 | BI01010001010000000000000515BI0100001182 | 30 | metre |
| 68 | 68 | Providing and fixing of 100 mm dia. Pipe M .S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : Si No 17.37.1 | BI01010001010000000000000515BI0100001183 | 8 | each |
| 69 | 69 | Providing and fixing of 75 mm dia. Pipe M .S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : Si No 17.37.2 | BI01010001010000000000000515BI0100001184 | 4 | each |
| 70 | 70 | Providing and fixing of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. Sand cast iron S&S as per IS - 1729 | BI01010001010000000000000515BI0100001185 | 5 | each |
| 71 | 71 | Sand cast iron S&S as per IS - 1729 17.38.2.1 | BI01010001010000000000000515BI0100001186 | 8 | each |
| 72 | 72 | Providing and fixing 100 mm DIA plain bend of required degree.Sand cast iron S&S as per IS - 1729 si No 17.39.1.1 | BI01010001010000000000000515BI0100001187 | 2 | each |
| 73 | 73 | Providing and fixing 75 mm DIA plain bend of required degree.Sand cast iron S&S as per IS - 1729 si No 17.39.2.1 | BI01010001010000000000000515BI0100001188 | 2 | each |
| 74 | 74 | Providing and fixing of 100x100x100 mm single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. Sand cast iron S&S as per IS - 1729 SI No 17.43.1.1 | BI01010001010000000000000515BI0100001189 | 2 | each |
| 75 | 75 | Providing and fixing of 75x75x75 mm single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. Sand cast iron S&S as per IS - 1729 SI No 17.43.2.1 | BI01010001010000000000000515BI0100001190 | 2 | each |
| 76 | 76 | Providing and fixing of 100 mm terminal guard: SI No 17.56.1.1 | BI01010001010000000000000515BI0100001191 | 3 | each |
| 77 | 77 | Providing and fixing collar: 100 mm 17.57.1.1 | BI01010001010000000000000515BI0100001192 | 4 | each |
| 78 | 78 | Providing and fixing collar: 75 mm 17.57.2.1 | BI01010001010000000000000515BI0100001193 | 4 | each |
| 79 | 79 | Providing 100 mm lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter: SI No 17.58.1 | BI01010001010000000000000515BI0100001194 | 54 | each |
| 80 | 80 | Providing 75 mm lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter: SI No 17.58.2 | BI01010001010000000000000515BI0100001195 | 51 | each |
| 81 | 81 | Providing and fixing 100 mm inlet and 75 mm outlet trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : Si No 17.60.2.2 | BI01010001010000000000000515BI0100001196 | 12 | each |
| 82 | 82 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour.\n450MM long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms. SI No 17.73.1 | BI01010001010000000000000515BI0100001197 | 3 | each |
| 83 | 83 | PART B WATER SUPPLY PIPES AND FITTING Internal work – Exposed on wall. | BI01010001010000000000000515BI0100001198 | ||
| 84 | 84 | Providing and fixing 20 mm dia. nominal bore G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Si No 18.10.2 | BI01010001010000000000000515BI0100001199 | 30 | metre |
| 85 | 85 | Providing and fixing 15 mm dia nominal bore G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : SI No 18.11.1 | BI01010001010000000000000515BI0100001200 | 20 | metre |
| 86 | 86 | Providing and fixing 20 mm dia nominal bore G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : SI No 18.11.2 | BI01010001010000000000000515BI0100001201 | 10 | metre |
| 87 | 87 | External work\nProviding and fixing of 25 mm dia. nominal bore G.I. pipes complete with G.I. fittings including trenching and refilling etc. SI No 18.12.3 | BI01010001010000000000000515BI0100001202 | 25 | metre |
| 88 | 88 | BRASS FITTINGS \nProviding and fixing of 20 mm nominal bore brass stop cock of approved quality : SI No 18.16.2 | BI01010001010000000000000515BI0100001203 | 2 | each |
| 89 | 89 | Providing and fixing of 25 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) : Si No 18.17.1 | BI01010001010000000000000515BI0100001204 | 1 | each |
| 90 | 90 | Providing and fixing of 20 mm nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 18.18.2 | BI01010001010000000000000515BI0100001205 | 2 | each |
| 91 | 91 | Providing and fixing 30 cm length 15 mm nominal bore uplasticised PVC connection pipe with brass unions : Si No 18.21.1.1 | BI01010001010000000000000515BI0100001206 | 11 | each |
| 92 | 92 | Providing and fixing of 100 mm diameterC.P. brass shower rose with 15 or 20 mm inlet : Sio No18.22.1 | BI01010001010000000000000515BI0100001207 | 3 | each |
| 93 | 93 | Providing and fixing of 15 mm nominal bore G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) SI No 18.46.1 | BI01010001010000000000000515BI0100001208 | 3 | each |
| 94 | 94 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank | BI01010001010000000000000515BI0100001209 | 1500 | per litre |
| 95 | 95 | Providing and fixing of 125 mm nominal dia with 25 mm waste hole PTMT grating of approved quality and colour. | BI01010001010000000000000515BI0100001210 | 12 | Each |
| 96 | 96 | C.P.BRASS FITTINGS. | BI01010001010000000000000515BI0100001211 | ||
| 97 | 97 | Providing and fixing of 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 SI no18.49.1 | BI01010001010000000000000515BI0100001212 | 8 | each |
| 98 | 98 | Providing and fixing of 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. SI No 18.51.1 | BI01010001010000000000000515BI0100001213 | 3 | each |
| 99 | 99 | Providing and fixing 15 mm nominal bore. C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. Si No 18.52.1 | BI01010001010000000000000515BI0100001214 | 3 | each |
| 100 | 100 | Providing and fixing 15mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore SI No18.53.1 | BI01010001010000000000000515BI0100001215 | 11 | each |
| 101 | 101 | PART C EXTERNAL SEWERAGE SYSTEM | BI01010001010000000000000515BI0100001216 | ||
| 102 | 102 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. All kinds of soil SI No 2.10.1.2 | BI01010001010000000000000515BI0100001217 | 35 | metre |
| 103 | 103 | Providing, laying and jointing 100 mm diameter glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : Si No19.1.1 | BI01010001010000000000000515BI0100001218 | 35 | metre |
| 104 | 104 | Providing and laying 100 mm diameter S.W. pipe cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: SI No 19.2.1 | BI01010001010000000000000515BI0100001219 | 35 | metre |
| 105 | 105 | Providing and fixing square-mouth S.W. gully trap grade 'A'’ complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 SI No 19.4.1.1 | BI01010001010000000000000515BI0100001220 | 5 | each |
| 106 | 106 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design : \nInside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :\nWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5 SI No 19.7.1.1 | BI01010001010000000000000515BI0100001221 | 6 | each |
| 107 | 107 | WIRING POINTS & SUBMAIN | BI01010001010000000000000515BI0100001222 | ||
| 108 | 108 | Wiring point for light with 1.5 sqm. FRLSH PVC insulateded as multistand single core copper conductor cable in heavy PVC conduit pipe concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose / angle batten holder on 3 mm thick phenolic laminated backelite sheet etc. complete in all respect, as directed including matching colour wash. Si 138 C | BI01010001010000000000000515BI0100001223 | 45 | Each |
| 109 | 109 | Wiring point for two way light with 1.5 sqm. FRLSH PVC insulateded as multistand single core copper conductor cable in heavy PVC conduit pipe concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 14 SWG copper earth continuity wire, and two numbers two days piano type switch & ceiling rose / angle batten holder on 3 mm thick phenolic laminated backelite sheet etc. complete in all respect, as directed including matching colour wash. SI 139 C | BI01010001010000000000000515BI0100001224 | 1 | Each |
| 110 | 110 | Wiring point for fan / fresh air fan (light duty exhaust fan) with 1.5 sqm. FRLSH PVC insulated as multistand single core copper conductor cable in heavy PVC conduit pipe concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire, and two numbers two days piano type switch & ceiling rose on 3 mm thick phenolic laminated backelite sheet etc. complete in all respect, as directed including matching colour wash. SI No 140 C | BI01010001010000000000000515BI0100001225 | 10 | Each |
| 111 | 111 | Wiring point for plug with 1.5 sqm. FRLSH PVC insulated as multistand single core copper conductor cable in heavy PVC conduit pipe concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire, and two numbers two days piano type switch & socket etc. complete in all respect, as directed including matching colour wash. SI No 141 C | BI01010001010000000000000515BI0100001226 | 18 | Each |
| 112 | 112 | Wiring point for exhaust fan with 1.5 sqm. FRLSH PVC insulated as multistand single core copper conductor cable in heavy PVC conduit pipe concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire, 15 A piano type switch & ceiling rose on 3 mm thick phenolic laminated backelite sheet etc. complete in all respect, as directed including matching colour wash. SI 144 C | BI01010001010000000000000515BI0100001227 | 9 | Each |
| 113 | 113 | Supply and fixing of switch box made up of 16 SWG (1.5 mm) thick M.S. sheet of 100x100x65 mm size duly painted with red oxide primer and flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labours and T&P required for proper completion of work as directed at site by Engineer in charge. | BI01010001010000000000000515BI0100001228 | 13 | Each |
| 114 | 114 | Supply and fixing of switch box made up of 16 SWG (1.5 mm) thick M.S. sheet of 150x150x65 mm size duly painted with red oxide primer and flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labours and T&P required for proper completion of work as directed at site by Engineer in charge. SI 160 | BI01010001010000000000000515BI0100001229 | 2 | Each |
| 115 | 115 | Supply and fixing of switch box made up of 16 SWG (1.5 mm) thick M.S. sheet of 175x100x65 mm size duly painted with red oxide primer and flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labours and T&P required for proper completion of work as directed at site by Engineer in charge. SI 161 | BI01010001010000000000000515BI0100001230 | 2 | Each |
| 116 | 116 | Add for light / fan point with modular type switch in place of piano type switch. SI 187 A | BI01010001010000000000000515BI0100001231 | 56 | Each |
| 117 | 117 | Add for 2 way light point with modular type switch in place of piano type switch. SI 187 B | BI01010001010000000000000515BI0100001232 | 1 | Each |
| 118 | 118 | Add for plug point with modular switch and socket in place of piano type switch and socket. SI 187 C | BI01010001010000000000000515BI0100001233 | 18 | Each |
| 119 | 119 | Add for HPMV / Exhaust fan point with modular type switch in place of piano type switch. SI 187 D | BI01010001010000000000000515BI0100001234 | 9 | Each |
| 120 | 120 | Supply and fixingand concealing of 20 mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirmingto IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid plasteringwith cement sand mortar finishedto the levelwith matchin colour wash including cost of all material labour and T&P etc required for proper completionof the work as per directionsand to the satisfactionof Engineerin charge. Si 148 (A) | BI01010001010000000000000515BI0100001235 | 100 | Meter |
| 121 | 121 | Supply and fixingand concealing of 25 mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirmingto IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid plasteringwith cement sand mortar finishedto the levelwith matchin colour wash including cost of all material labour and T&P etc required for proper completionof the work as per directionsand to the satisfactionof Engineerin charge. 149 (A) | BI01010001010000000000000515BI0100001236 | 250 | Meter |
| 122 | 122 | Supply and fixingand concealing of 32 mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirmingto IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid plasteringwith cement sand mortar finishedto the levelwith matchin colour wash including cost of all material labour and T&P etc required for proper completionof the work as per directionsand to the satisfactionof Engineerin charge. 150 (A) | BI01010001010000000000000515BI0100001237 | 25 | Meter |
| 123 | 123 | Supply and fixingand concealing of 40 mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirmingto IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid plasteringwith cement sand mortar finishedto the levelwith matchin colour wash including cost of all material labour and T&P etc required for proper completionof the work as per directionsand to the satisfactionof Engineerin charge. 151 (A) | BI01010001010000000000000515BI0100001238 | 10 | Meter |
| 124 | 124 | Supply and wiring of 2x4+1x2.5 sq mm in 20mm dia conduit of following submain with FR PVC insulated 1100 V grade multistrand single core copper conductor cable in 2mm thick PVC conduit partly concealed in wall and partly laid in slab alongwith reinforcement before concreting, with FRLSH PVC insulated copper conductor cable as earth continuity wire drawn inconduit in all respect. 221 (C) | BI01010001010000000000000515BI0100001239 | 250 | Metre |
| 125 | 125 | Supply and wiring of 2x6+1x4 sq mm in 25mm dia conduit of following submain with FR PVC insulated 1100 V grade multistrand single core copper conductor cable in 2mm thick PVC conduit partly concealed in wall and partly laid in slab alongwith reinforcement before concreting, with FRLSH PVC insulated copper conductor cable as earth continuity wire drawn inconduit in all respect. 222 (C) | BI01010001010000000000000515BI0100001240 | 50 | Metre |
| 126 | 126 | Supply and wiring of 4x10+2x6 sq mm in 32mm dia conduit of following submain with FR PVC insulated 1100 V grade multistrand single core copper conductor cable in 2mm thick PVC conduit partly concealed in wall and partly laid in slab alongwith reinforcement before concreting, with FRLSH PVC insulated copper conductor cable as earth continuity wire drawn inconduit in all respect. 278 (C) | BI01010001010000000000000515BI0100001241 | 50 | Metre |
| 127 | 127 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch ,connection etc as required. (DSR - 1.31) | BI01010001010000000000000515BI0100001242 | 17 | Each |
| 128 | 128 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15/16 and 5/6 amps modular socket outlet with shulter and 15/16 amps modular switch connection, etc as required. (DSR - 1.32) | BI01010001010000000000000515BI0100001243 | 16 | Each |
| 129 | 129 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing of 25A modular socket outlet and 25A modular SP MCB \"C\" curve including connections painting etc. as required. (DSR-1.57) | BI01010001010000000000000515BI0100001244 | 2 | Each |
| 130 | 130 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2nos. 3 pin 5/6 amps modular socket outlet and 2nos. 5/6 amps modular switch ,connection etc as required. (For Light plugs to be used in Non Residential buildings) (DSR-1.56) | BI01010001010000000000000515BI0100001245 | 9 | Each |
| 131 | 131 | Supplying and fixing Telephone socket outlet modular switch/ socket on the existing modular plate and switch box including connections but excluding plate etc .as required. DSR(1.24.6) | BI01010001010000000000000515BI0100001246 | 6 | Each |
| 132 | 132 | Supplying and fixing RJ 45 Outlet modular switch/ socket on the existing modular plate and switch box including connections but excluding plate etc .as required. (NS) | BI01010001010000000000000515BI0100001247 | 8 | Each |
| 133 | 133 | Supplying and fixing T.V. socket outlet modular switch/ socket on the existing modular plate and switch box including connections but excluding plate etc .as required. DSR(1.24.7) | BI01010001010000000000000515BI0100001248 | 2 | Each |
| 134 | 134 | Supplying and drawing co-axial TV Cable RG-6 grade, 0.7mm solid copper conductor PE insulated shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed steel / PVC conduit as required. (DSR-1.19) | BI01010001010000000000000515BI0100001249 | 25 | Meter |
| 135 | 135 | Supplying and drawing 2 Pair 0.5.mm dia FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed steel/ PVC conduit as required. DSR(1.18.2) | BI01010001010000000000000515BI0100001250 | 125 | Meter |
| 136 | 136 | Supplying and drawing of 1 Run of cableUTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit with termination complete as required DSR(1.53) | BI01010001010000000000000515BI0100001251 | 125 | Meter |
| 137 | 137 | Supplying and fixing of theb) 20 pairs sheet steel clad wall / recess mounting telephone tag blocks of krone make constructed from 14 SWG sheet steel finished with red oxide coating of two coats of paint with hinged gasketted powder coated door and complete. (NS) | BI01010001010000000000000515BI0100001252 | 1 | Each |
| 138 | 138 | S/F of recess / Surface / Pendant mounting round 10 to 15 Watt LED downlighter having powder coated die cast aluminium housing with heat sink, driver reflector set complete in all aspects. CAT-AAA si 1402 | BI01010001010000000000000515BI0100001253 | 24 | Each |
| 139 | 139 | S/F of LED Tube light with batten suitabke for opto 1x22W LED tube light complete including tube etc. on surface complete in all respect. CAT-AAA si 1413 | BI01010001010000000000000515BI0100001254 | 18 | Each |
| 140 | 140 | S/F of Single LED light wall bracket 3 to 6 Watt on matching M.D.E.F.G board base etc. complete in all respect. CAT-AAA SI 1417(A) | BI01010001010000000000000515BI0100001255 | 4 | Each |
| 141 | 141 | S/F of water tight oblong 10W LED bulkhead with driver set confirming to IP 65 and above protection complete in all respect. CAT-AAA SI 1417 | BI01010001010000000000000515BI0100001256 | 2 | Each |
| 142 | 142 | Supply & fixing Hexagonal fan box made of 16SWG MS sheet incorporatics 10 mm dia 145 rounds bar complete. 1149 | BI01010001010000000000000515BI0100001257 | 10 | Nos. |
| 143 | 143 | Erection and testing of ceiling fan and regulator etc excluding supply of down rod, complete in all respect. SI 1115 | BI01010001010000000000000515BI0100001258 | 10 | Nos |
| 144 | 144 | Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts nuts and washers etc complete in all respects. Si 1120 | BI01010001010000000000000515BI0100001259 | 9 | Nos |
| 145 | 145 | Supply and fixing of 16 gauge MS drum duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respect. Si 1122 | BI01010001010000000000000515BI0100001260 | 9 | Nos |
| 146 | 146 | Supply of AC 1200 mm sweep 230/250 volts, 50 HZ ceiling fan with standard down rod, blades, 2 nos. caps etc. complete NS | BI01010001010000000000000515BI0100001261 | 10 | Nos |
| 147 | 147 | Supply & burrying of 600mm x 600mm x 6.0mm GI plate, vertically for earthing with its top at least 3 meters below ground level complete with 20 mm GI pipe for watering funnel, 30 cm square CI frame with hinged cover, masonry housing, alternate layers of coke / charcoal and salt at least 150 mm thick alround etc. complete in all respects. | BI01010001010000000000000515BI0100001262 | 2 | Nos |
| 148 | 148 | Supplying & Laying of 25mm x 3mm. G.I. strip for earthing purpose as required complete in all respects. | BI01010001010000000000000515BI0100001263 | 25 | M |
| 149 | 149 | S&F of 6 Amp to 32 Amp. SPMCB (10 KA). CAT-A Si 1002 | BI01010001010000000000000515BI0100001264 | 22 | Each |
| 150 | 150 | S&F of 40 Amp. DP MCB (10 KA).CAT-A SI 1010 | BI01010001010000000000000515BI0100001265 | 1 | Each |
| 151 | 151 | S&F of 63 Amp. 4 Pole MCB (10 KA).CAT-A Si 1020(A) | BI01010001010000000000000515BI0100001266 | 1 | Each |
| 152 | 152 | S&F surface / flushmounting 8 ways SPN distribution board with additional metal door without MCB complete in all respect, as directed by Engineerin charge. CAT-A Si 1024(A) | BI01010001010000000000000515BI0100001267 | 1 | Each |
| 153 | 153 | S&F surface / Flush mounting 6ways TPN distribution board with additional metal door without MCB complete in all respect,as directed at site by Engineer in charge. CAT-A Si 1027(A) | BI01010001010000000000000515BI0100001268 | 1 | Each |
| 154 | 154 | 150A TPN Aluminium bus bar having a current density of not less than 1.0 Amp sq.mm. and the neutral bus of 50% capacity inter connections between bus bars and breakers shall be through solid copper strip. 63A 4P MCB - 02 Nos. | BI01010001010000000000000515BI0100001269 | 1 | Set |
| 155 | 155 | Supply and laying of 25sq mm 3.5 core aluminium conductor PVC insulate armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Si 501 | BI01010001010000000000000515BI0100001270 | 50 | Meter |
| 156 | 156 | Supply and fixing of 25sq mm 3.5 core brass nickle plated compression gland for PVC insulated & armoured served sheathed, under ground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 503 | BI01010001010000000000000515BI0100001271 | 2 | Each |
| 157 | 157 | Supply and fixing of 25sq mm plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer Incharge. SI 504 | BI01010001010000000000000515BI0100001272 | 2 | Each |
| 158 | 158 | Site Development (Septic Tank and Soak Pit) | BI01010001010000000000000515BI0100001273 | 1 | Job |
| 159 | 159 | Solar Photo Voltage Power Generation System (AS SANCTION) | BI01010001010000000000000515BI0100001274 | 1 | Job |
AI Tender Summary
Tender Timeline
Jan 28, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 04, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 05, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender