Construction Of Pwd I . B . At Chandikhole In The District Of Jajpur For The Year 2019-20 ( Cw , Ei , Ph )
Tender Value
54.69 Lakhs
Estimated cost
Bid Submission
11 Feb 2020
0 days left
EMD
54700
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Rate Contract
Location / State
Chandikhole → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Pwd I . B . At Chandikhole In The District Of Jajpur For The Year 2019-20 ( Cw , Ei , Ph )
BOQ
| Name of Work: Construction of PWD I.B. at Chandikhole in the district of Jajpur for the year 2019-20 (CW, EI, PH) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Civil Works:- Earth work excavation in foundation trenches in all kinds of soil including hard moorum stony earth mixed with stone and boulders (except sheet rocks and boulders required blasting) including dressing and leveling the bed up to required depth and depositing the excavated materials at places away from work site with all leads and lifts T&P shoring shuttering dewatering if required etc. complete as per direction of the Engineer-in-charge. | 154.05 | One Cum | |
| 2 | 2 | Supplying filling in foundation and plinth with sand in layers not exceeding 150mm thick including watering, ramming including cost, conveyance, royalty and taxes of all materials, all labour T&P required for the work etc. complete (measurement will be taken on finished compacted section only). | 340.2 | One Cum | |
| 3 | 3 | Cement concrete of prop.(1:3:6) in foundation and floors using 40mm size clean hard black cursher broken granite metal of approved quality from approved quarry including lowering laying concrete in layers not exceeding 15cm thick to the required level ramming watering curing centering & shuttering etc. complete including cost conveyance royalty taxes of all materials and all labour T&P required for the work etc. complete including de-watering if required comp. | 28.05 | One Cum | |
| 4 | 4 | Fly Ash brick masonary using Fly Ash brick having crushing strength not less than 75kg/cm2 in cement mortar of (1:6) after immersing the bricks for six hours in water before use in Foundation & Plinth including splays cutting circular moulding corbelling champhering and similar such type of work watering and curing including cost conveyance royalty taxes of all materials and cost of all labour with T&P required for the work. | 65.65 | One Cum | |
| 5 | 5 | RCC work of M-20 in column, beams, roof slab,Sloped Roof Slab,Stair Case, lintel and chajja, fins, shelves and floors slab in all floors having a minimum compressive strength ( in work test) 200kg/cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 using 10mm size to 20mm size black hard crusher broken granite stone chips (10mm size 40% & 20mm size 60%) of approved quality & from approved quarry including hoisting lowering laying and compacting concrete with centering & shuttering and finishing the exposed surface smooth providing grooves or beads where necessary and providing required No. of fan hooks as required including cost, conveyance, royalties and taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect but excluding cost of MS rod / Tor steel and binding wire and labour charges for bending binding and tying the grills.(In all Floors) | |||
| 6 | 6 | Columns base & footing | 26.22 | One Cum | |
| 7 | 7 | R CC Column s | |||
| 8 | 8 | A) Ground Floor | 13.52 | One Cum | |
| 9 | 9 | B) 1st Floor | 0.85 | One Cum | |
| 10 | 10 | RCC plinth beam | 11.79 | One Cum | |
| 11 | 11 | RCC lintel | 5.14 | One Cum | |
| 12 | 12 | RCC chajja (6.5cm thick) | 37.67 | One Sqm | |
| 13 | 13 | Shelves | 11.71 | One Sqm | |
| 14 | 14 | RCC fines | 17.68 | One Sqm | |
| 15 | 15 | RCC roof slab | |||
| 16 | 16 | A) Ground Floor | 40.54 | One Cum | |
| 17 | 17 | B) 1st Floor | 3.35 | One Cum | |
| 18 | 18 | RCC beam | |||
| 19 | 19 | A) Ground Floor | 10.88 | One Cum | |
| 20 | 20 | B) 1st Floor | 1.35 | One Cum | |
| 21 | 21 | RCC stair case | 2.92 | One Cum | |
| 22 | 22 | Labour charges for straightening the coiled or bend up M.S. rod / HYSD bars confirming to Gr. S 240 or Fe-500, cutting bending binding lapping placing welding etc. (Confirming to ISI specification) and jointing if necessary by lapping and tying the grills and placing in position as required for RCC work as per approved design hoisting lowering and laying in position including cost conveyance & taxes of M.S. rod / tor steel (Primary Producer like-SAIL /RINL/ TATA/ JINDALSTEEL/ SHYAM STEEL) make) and binding wire of 18 to 20 gauge (as approved by the deptt.) weight of over lapping, couping, welded joints, spaeer bar, chair, stage, hanger and binding wires shall not be considered for payment at all. Standard co-efficient of different size of the steel shall be considered. Welding & lapping should be confirming to relevant clause of IRC 1987 in all floors. | |||
| 23 | 23 | A) Ground Floor | 71.72 | One Qntl | |
| 24 | 24 | B) 1st Floor | 7.07 | One Qntl | |
| 25 | 25 | 2.5cm thick grading concrete in CC (1:2:2) on roof slab with 4.7mm size hard crusher broken granite chips including washing and cleaning the surface properly ,hoisting, laying in layers compacting, watering& curing with cost, conveyances, royalities, taxes of all materials, labour, sundries, T&P required for the work etc. complete as per direction & specification of Engineer-in-charge in all floors. | |||
| 26 | 26 | A) Ground Floor | 276.64 | One Sqm | |
| 27 | 27 | B) 1st Floor | 32.96 | One Sqm | |
| 28 | 28 | Fly Ash brick masonary using Fly Ash brick having crushing strength not less than 75kg/cm2 in cement mortar of (1:6) after immersing the bricks for six hours in water before use in superstructure including splays cutting circular moulding corbelling champhering and similar such type of work watering and curing including cost conveyance royalty taxes of all materials and cost of all labour with T&P required for the work in all floors. | |||
| 29 | 29 | A) Ground Floor | 62.5 | One Cum | |
| 30 | 30 | B) 1st Floor | 8.34 | One Cum | |
| 31 | 31 | Supplying fixing and fittings MS door and window shutters with frames, window grills, MS verandha grills and MS grill gate, MS rolling shutter of approved design and drawing made out of MS flat and MS angle at work site with one coat of anticorrosive red oxide zink chrome primer including cutting holes in brick or RCC walls and fixing with CC (1:3:6) including cost conveyance royalty and taxes of all materials all labour T&P required for the work complete (payment will be made on weight basis only)(In all floors) | |||
| 32 | 32 | A) Ground Floor | 1687.33 | One Kg | |
| 33 | 33 | B) 1st Floor | 98 | One Kg | |
| 34 | 34 | Providing 6mm thick cement plaster in cement mortar (1:4) finished smooth in RCC surface, ceiling & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge.(In all floors) | |||
| 35 | 35 | A) Ground Floor | 467 | One Sqm | |
| 36 | 36 | Providing 12mm thick cement plaster in cement mortar (1:6) finished smooth to brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge.(In all floors) | |||
| 37 | 37 | A) Ground Floor | 341.72 | One Sqm | |
| 38 | 38 | B) 1st Floor | 33.98 | One Sqm | |
| 39 | 39 | Providing 16mm thick cement plaster in cement mortar (1:6) finished smooth to brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge.(In all floors) | |||
| 40 | 40 | A) Ground Floor | 254.35 | One Sqm | |
| 41 | 41 | B) 1st Floor | 33.98 | One Sqm | |
| 42 | 42 | Providing 12mm thick cement plaster in cement mortar (1:4) finished smooth to brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge.(In all floors) | |||
| 43 | 43 | A) Ground Floor | 316.1 | One Sqm | |
| 44 | 44 | B) 1st Floor | 29.81 | One Cum | |
| 45 | 45 | Providing brick on edge flooring over on brick flat set in cement mortar (1:8) etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge (in all floors) | 60.42 | One Sqm | |
| 46 | 46 | Cement concrete(1:2:4) using 12mm size crusher broken hard granite stone chips of approved quality & from approved quarry including hoisting, laying in layers compacting watering curing with cost, conveyances, royalities, taxes of all materials, labour, sundries, T&P required for the work etc. complete as per direction & specification of Engineer-in-charge in all floors. | 12.24 | One Cum | |
| 47 | 47 | Supplying, fitting, fixing of Vitrified Tiles Premium grade (600x600mm, Colour/Printed) in floors, treads, steps and landing slab on 20mm thick bed of cement mortar (1:4) joined with neat cement slurry mixed with pigments to match the shades of the tiles including, rubbing and polishing the surface with cost, conveyance, royality and all taxes of all materials etc. complete as per direction of the Engineer-in-charge. | 469.44 | One Sqm | |
| 48 | 48 | Providing, Fitting & Fixing of Stainless steel of 304 grade in handrailing of 50mm outer diameter of 2mm thick of approved Quality & Specification with balustrade of size 32mmX32mmX2mm square pipes in rows including Cost,conveyance of all Materials, Labour ,T&P required for fabrication, buffing & polishing, cost of all fixtures etc. complete and as per specification & direction of Engineer-in-charge (In all floors) | 144 | One Kg | |
| 49 | 49 | Supplying, fitting, fixing of Chequired Tiles in floors, treads, steps and landing slab on 25 mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the shades of the tiles including, rubbing and polishing the surface with cost, conveyance, royality and all taxes of all materials etc. complete. | 113.14 | One Sqm | |
| 50 | 50 | Providing fitting fixing of Al door with anodized Al door sction of 9202 as vertical member, 9201 as top 9200 as bottom and middle member with frame section as 9221 with tapered clip No. 4660 with 12mm thick pre-laminated board at bottom & 5mm thick black glass in top portion of door frame including cost of all materials with locking arragement T&P hire charges of drilling machine, labour charges etc. complete (excluding cost of laminated board and glass) as per the direction of engineer in Charge. (Weight of AL sections only will be measured for payment) | 645.22 | One Kg | |
| 51 | 51 | Supplying fitting and fixing of 12mm thick pre-laminated board in Al door cutting into proper size and fixing with cost, conveyance, taxes etc complete as per the specification and direction of Engineer in charge. | 14.96 | One Sqm | |
| 52 | 52 | Providing, fitting & fixing Factory made FRP (alternately called GRP) Door frame of size 75mm x 100 mm, fabricated using E-Glass Chopped strand Mat (CSM), U.V. stabilized Isopthalic Gelcoat and impregnated with Isophthalic resin. The thickness of the GRP skin shall not be less than 2.0mm. The door frame consist of four segments, which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement. Six numbers of 260mm x 25mm x 5mm size ‘S’ shaped M.S. flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre’s Standards and specifications (In all floors) | 157.81 | R.M. | |
| 53 | 53 | Supplying, fitting, fixing up window (sliding type) made up aluminum Section 9778, as windows frame section No. 4095, 4096 and 9777, 3994 as shutter frame with 12 mm thick pre-laminated particle board as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-charge. (Aluminium Frame only) | 247.47 | One Kg | |
| 54 | 54 | Finishing wall surface smooth with Cement based wall putty including cost, conveyance and all taxes of all materials, labour & T&P required for the work etc. complete as per direction of the Engineer-in-Charge. | |||
| 55 | 55 | A) Ground Floor | 1150.74 | One Sqm | |
| 56 | 56 | B) 1st Floor | 102.09 | One Sqm | |
| 57 | 57 | Painting 2 coats with Plastic Emulsion paints of approved shade over a coat of wall primer by means of brush to inside surface of walls after cleaning the surface etc. complete in all floors including cost of all materials with all taxes and cost of all labour with T&P required for the work etc. complete in all respect as directed by Engineer – in – Charge. | |||
| 58 | 58 | A) Ground Floor | 681.64 | One Sqm | |
| 59 | 59 | B) 1st Floor | 61.68 | One Sqm | |
| 60 | 60 | Painting 2 coats with water proofing weather coat paint of approved shade by means of brush to outside surface of walls complete in all floors with cost, carriage and all taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect as per direction of the Engineer – in – Charge. | |||
| 61 | 61 | A) Ground Floor | 1208.1 | One Sqm | |
| 62 | 62 | B) 1st Floor | 40.41 | One Sqm | |
| 63 | 63 | Supplying fitting and fixing of Granite tiles 10mm thick (0.10 sqm to 0.40 sqm) of approved quality of approved colour confirming to I.S. specification in floors fixed in neat cement slurry after soaking the tiles in water & fixing over 25mm thick bed of cement mortar of prop. (1:1) filling joints iwth white cement & colouring pigments to match the shade of the tiles including washing and cleaning with oxalic acid with watering, curing cost, conveyance, royality, taxes of all materials coat of all labour and sundries, T&P required for the work etc. complete and as per the specification & direction of Engineer in charge. | 40.46 | One Sqm | |
| 64 | 64 | Painting two coats with synthetic enamel paints including cleaning the surface with sand papering and using paints of approved quality and approved shade including cost conveyance taxes of all materials all labour T&P etc. complete as directed by the Engineer in charge.(In all floors) | |||
| 65 | 65 | A) Ground Floor | 556.58 | One Sqm | |
| 66 | 66 | B) 1st Floor | 4.55 | One Sqm | |
| 67 | 67 | Supplying fitting and fixing of rainwater pipe using 110mm dia & 1.00mtr. long Supremet make ‘A’ type PVC pipe with one PVC bend including cutting holes in walls jointing with cement concrete (1:2:4) with cost conveyance, royalty taxes of all materials all labour T&P etc. complete as per specification and direction of the Engineer-in-charge. (In all floors) | 71.83 | R.M. | |
| 68 | 68 | Providing fitting and fixing of flase celling with aluminium anodised T section No. 3215 with 2'.0'' section No. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and PVC pluge etc complete including Cost,conveyance of all Materials, Labour ,T&P required for the work and as per specification & direction of Engineer-in-charge | 98.16 | One Sqm | |
| 69 | 69 | Supplying fitting and fixing of 5mm thick black glass to Al doors and windows including cost of glass pans and cutting to size with cost of nails and putty etc. complete as per the specification and direction of Engineer in charge. | 68.85 | One Sqm | |
| 70 | 70 | E.I. works :- Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 6Amp, 250V Modular switch ISI marked and ceiling rose ISI marked mounted on metal box having front Modular cover of suitable size, metal box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection.(Make of wire-L&T/Anchor/Havells/V-Guard/Great White/HPL) Group-A L.P- 48 F.P-4 | 52 | Point | |
| 71 | 71 | Group-B L.P- 32 F.P- 20 | 52 | Point | |
| 72 | 72 | Group-C L.P- 20 F.P- 20 C.B.P-3 | 43 | Point | |
| 73 | 73 | Supply and fixing of 6Amp plug with 6Amp switch on existing board (Modular type) | 12 | Each | |
| 74 | 74 | Supply and fixing of 6Amp plug with 6Amp switch on Separate board (Modular type) | 10 | Each | |
| 75 | 75 | Supply and fixing of Modular metal box in recess with suitable size of Modular cover in front including providing and fixing of 6pin 6Amp & 16Amp socket outlet and 16Amp Modular switches connection for power points and Gyser (make-Anchor/ Legrand /Roma/Great White/HPL) | 3 | Each | |
| 76 | 76 | Supply and fixing of Electronics step type Modular fan regulator. (Make-Cona/ Anchor/ Usha/Bajaj)\n | 36 | Each | |
| 77 | 77 | S/F of Computer board consisting 4nos. 6Amp plug and switch Modular on metal box and Modular cover with all connections \n | 2 | Each | |
| 78 | 78 | Recessed wiring to A.C point with modular 32Amp ,single phase, 240V, 50 Hz ,A.C (5 H.P) motor starter with all accessories and connections as per Direction of Engineer-in Charge ( ROMA/Havells/CONA/ANCHOR) | 2 | Each | |
| 79 | 79 | Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required.(Make of wire-Finolex/L&T/Anchor/Havells/V-Guard//HPL) 2 X 2.5 sq.mm +1 X 1.5 sq.mm in 20 mm dia\n | 280 | Mtr. | |
| 80 | 80 | 2 X 4 sq.mm +1 X 1.5 sq.mm -do- | 160 | Mtr. | |
| 81 | 81 | 2 X 6 sq.mm +1 X 2.5 sq.mm in 25mm dia | 86 | Mtr. | |
| 82 | 82 | 2 X 10 sq.mm + 1 X 4 sq.mm -d0- | 42 | Mtr. | |
| 83 | 83 | Supply and drawing of following sizes FR PVC insulated single core multistrand copper conductor in existing surface/recessed/STEEL /PVC conduit as required for Inverter wiring. 1 X 1.5sqmm | 120 | Mtr. | |
| 84 | 84 | Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make-HPL/ Havells/ Legrand /L&T/C&S.) 8 way,Double door | 4 | Each | |
| 85 | 85 | Supply and fixing of 5Amp to 32A rating 240 V/415 V \"B\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make-HPL/ Havells/ Legrand /L&T/C&S) Single pole (SP) | 24 | Each | |
| 86 | 86 | 40Amp DP MCB | 4 | Each | |
| 87 | 87 | Supply and fixing of Special Copper plate earthing 600 mm X 600 mm X 3.15 mm thick ISI marked including accessories and providing 40mm dia 3mtr long G.I pipe, reveting,sweating and solding of copper tape with cover plate having locking arrangement including excavation of rock pit of size 3'x3'x10' depth, refilling of sand & soft soil and watering the pipe with filling of charcoal and salt etc. as required as per direction of Engineer-in-Charge.\n | 2 | Each | |
| 88 | 88 | Supplying and laying 25mm X 3mm copper strip on surface or in recess for connection etc as required. | 30 | Kg | |
| 89 | 89 | S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose . | 8 | Each | |
| 90 | 90 | Supply and fixing Call bell push Modular type (make-Cona/Anchor/V-Guard)\n | 3 | Each | |
| 91 | 91 | S/F of 48\" size A.C Ceiling fan with all accesories and connection (Make-Usha/Orient PSPO/ Havells) | 36 | Each | |
| 92 | 92 | S/F of 12\" size Exhaust fan with all accesories and connection.(Make-Havells/Usha/Orient PSPO) | 8 | Each | |
| 93 | 93 | S/F of 16\" size Wall mounted fan with all accesories and connection.(Make-Usha/Orient PSPO/Havells) | 2 | Each | |
| 94 | 94 | Supply , installation , testing and commissioning 125Amp. INDOOR pannel board with danger board . 16/18 SWG pannel box L30\" X30\"BX 5= 5400 sq. inch for single door made out of CR sheet of 16SWG and boarder angle frame to provide above pannel with proper space ,hinges, and other accessories , hinged door must be painted one coated red oxide and two coat enamel gray paint | 5400 | Sq.inc | |
| 95 | 95 | Supply and fixing of internal wiring to equipment installed in the pannel board with required size of copper multistrand single core cables duly crimped with copper lugs and all connections L36\" X30\" B including cost of copper conductor and other fittings like gasket ,screw , nut and bolt , insulating materials etc. | 1080 | Sq.inc | |
| 96 | 96 | S/F of bus bar 35 x 5 mm with required size of insulating material and nut and bolts | 2 | Mtr | |
| 97 | 97 | S/F of bus bar 25 x 5mm with required size of insulating material and nut and bolts | 2 | Mtr | |
| 98 | 98 | Supply and fixing of following size of 4pole MCCB in cubicle panel board for incoming and out going (Legrand/HPL/Havells/Anchor/L&T) 125 Amp 4-pole 36 KA MCCB (as Incomer) | 1 | Each | |
| 99 | 99 | 63 Amp DP MCB | 2 | Each | |
| 100 | 100 | 32 Amp DP MCB | 4 | Each | |
| 101 | 101 | Supply and fixing of changeover switch (Anchor/ Havells/ Apex)\n100Amp three pole neutral | 1 | Each | |
| 102 | 102 | Supply and fixing of Ammeter(0A-500A) with selector switch including all connections | 1 | Each | |
| 103 | 103 | Supply and fixing of voltmeter(0V-500V)with selector switch including all connections | 1 | Each | |
| 104 | 104 | Supply and fixing of Indicator lamp with toggler switch and fuse | 3 | Each | |
| 105 | 105 | Installation, testing and commissioning of above MCCB pannel board with danger board | 1 | Each | |
| 106 | 106 | Internal PH works:-Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor galvanized mild steel tubes (medium grade) of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge | |||
| 107 | 107 | 25mm dia GI pipe | 24 | Mtr | |
| 108 | 108 | 32mm dia G.I pipe | 13 | Mtr | |
| 109 | 109 | 40mm dia G.I pipe | 42 | Mtr | |
| 110 | 110 | 50mm dia G.I pipe | 4 | Mtr | |
| 111 | 111 | Supplying all materials, labour, T&P and providing and fixing Chlorinated Polyvinyl Chloride (CPVC)/HDPE Pipes conforming to IS: 15778,,having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings including fixing the pipes with clamps at 1.00m specing.This includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of Engineer in charges. | |||
| 112 | 112 | 20mm dia C-PVC pipe | 38 | mtr | |
| 113 | 113 | Supplying all materials, labour,T&P and painting two coats with white enamel paint brushing interior over one coat of priming with red oxide zinc chrome primer on the external surface of new galvanised mild steel tubes and fittings of following nominal diameter to give an even shade including preparing the surface and clearing the surface of all all dirts, dusts and foreign matters as per direction of the Engineer in charge. | |||
| 114 | 114 | 25mm to 32mm dia | 36 | Mtr | |
| 115 | 115 | 40mm to 50mm dia | 45 | Mtr | |
| 116 | 116 | Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge. | |||
| 117 | 117 | 250mm thick wall | 15 | Each | |
| 118 | 118 | Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing GI pipes / PVC pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof as per direction of the Engineer in charge. | 7 | Each | |
| 119 | 119 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. | 35 | Mtr | |
| 120 | 120 | Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge. Fittings of CP / Brass / G.M are to be pre-approved by E.I.C | |||
| 121 | 121 | 15 mm dia CP Bib cock (Jaquar / Kingstone Make) | 1 | Each | |
| 122 | 122 | 15 mm dia CP LB Bib cock (Jaquar / Kingstone Make) | 4 | Each | |
| 123 | 123 | 15 mm dia CP 2-way Bib cock (Jaquar / Kingstone Make) | 4 | Each | |
| 124 | 124 | 15mm dia CP angle stop cock (Jaquar / Kingstone Make) | 19 | Each | |
| 125 | 125 | 20mm dia CP con. stop cock (Jaquar / Kingstone Make) | 2 | Each | |
| 126 | 126 | 15 mm dia CP Pillar cock (Jaquar / Kingstone Make) | 3 | Each | |
| 127 | 127 | 25mm dia brass or gun metal fullway valve (Shakti Make) | 9 | Each | |
| 128 | 128 | 40mm dia brass or gun metal fullway valve (Shakti Make) | 2 | Each | |
| 129 | 129 | 15mm dia CP flange | 32 | Each | |
| 130 | 130 | 15mm dia CP extension piece | 32 | Each | |
| 131 | 131 | Supplying all materials, labour, T&P and fitting and fixing CP shower with 15mm or 20mm inlet with CP shower arm including polishing all complete as per specification and direction of the Engineer in charge | |||
| 132 | 132 | 15mm dia CP revolving shower with CP shower arm | 2 | Each | |
| 133 | 133 | Over head shower (Jaquar make)-C.No-OHS-CHR-1989 | 3 | Each | |
| 134 | 134 | Shower Arm (Jaquar make)-C.No-SHA-CHR-49483 | 3 | Each | |
| 135 | 135 | 15mm CP hand shower (Jaquar make) C.No-ALD-CHR-573 | 4 | Each | |
| 136 | 136 | Wall mixture with 3-in-1 system with both telephonic shower (Jaquar make)Cat.No-281 | 3 | Each | |
| 137 | 137 | Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge | |||
| 138 | 138 | 10 litres capacity pvc low level cistern (Slimline-white) | 2 | Each | |
| 139 | 139 | Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 20 metres above ground level and placing the tank to the required position and providing 1st class Fly ash brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 3.15m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge. On the roof of ground floor floor(In first floor) -2000litre capacity water storage tanks(Sintex make) | 1 | Each | |
| 140 | 140 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge | |||
| 141 | 141 | 110mm dia U-PVC SWR pipe(Suprime/Ashirvad Make-Type-A) | 46 | Mtr | |
| 142 | 142 | 110mm U-PVC door Tee(Finolex/Supreme/Ashirvad Make) | 5 | Each | |
| 143 | 143 | 110mm U-PVC plain Tee(Finolex/Supreme/Ashirvad Make) | 2 | Each | |
| 144 | 144 | 110mm U-PVC door bend(Finolex/Supreme/Ashirvad Make) | 8 | Each | |
| 145 | 145 | 110mm U-PVC plain bend(Finolex/Supreme/Ashirvad Make) | 33 | Each | |
| 146 | 146 | 110mm dia U-PVC offset (Finolex/Supreme/Ashirvad Make) | 3 | Each | |
| 147 | 147 | 110mm dia U-PVC 'P' trap(Finolex/Supreme/Ashirvad Make) | 9 | Each | |
| 148 | 148 | 110mm dia U-PVC cowl(Finolex/Supreme/Ashirvad Make) | 6 | Each | |
| 149 | 149 | 110mm dia U-PVC clamp (Finolex/Supreme/Ashirvad Make) | 25 | Each | |
| 150 | 150 | 125mm dia CP grating | 9 | Each | |
| 151 | 151 | Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC SWR pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge | |||
| 152 | 152 | 250mm to 375mm thick wall | 21 | Each | |
| 153 | 153 | Supplying all materials, labour, T&P and cutting of R.C.C roof or cornice for taking U-PVC SWR pipes and making good the damages etc all complete as per P.H.Specification and direction of the Engineer in charge. | 2 | Each | |
| 154 | 154 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 110mm dia PVC SWR ‘P’ trap for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge | |||
| 155 | 155 | 580mm size Orissa pan (Parryware/Neycer make) | 1 | Each | |
| 156 | 156 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge | |||
| 157 | 157 | E.W.C. with ‘S’ trap plain with seat cover.(Parryware make) | 1 | Each | |
| 158 | 158 | One Piece E.W.C. with ‘S’ trap plain with seat cover. (Hindware Make - C-92521) | 3 | Each | |
| 159 | 159 | M.S. Consealed stand for One Piece W.C. | 3 | Each | |
| 160 | 160 | Supplying all materials, labour, T&P and fixing bowl pattern urinal of the following sizes including connecting the urinal with 32mm dia pvc waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia CP dome waste, 15mm dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc all complete as per specification and direction of the Engineer in charge. | |||
| 161 | 161 | Half stall urinal (Hindware Make - 60002) | 1 | Each | |
| 162 | 162 | 32mm dia CP dome waste | 1 | Each | |
| 163 | 163 | 15mm dia CP spreader | 1 | Each | |
| 164 | 164 | Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge | |||
| 165 | 165 | 600x450x250 mm stainless steel kitchen sink-glossy-IS:13983 - 1994 (Jayna make) | 1 | Each | |
| 166 | 166 | Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing plaza pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge | |||
| 167 | 167 | 550mmx400mm size wash hand basin (Parryware/Neycer make) | 1 | Each | |
| 168 | 168 | Porcelain pedestal (Parryware/Neycer make) | 1 | Each | |
| 169 | 169 | Counter top basin without pillar cock (Jaquar make)Cat No- FLS-WHT-5601 | 3 | Each | |
| 170 | 170 | Half Pedestal Wash Hand Basin (Pedestal Basin CEDAR\" 57x44 Hindware Make- 91049 + Half Ped \"CEDAR\" 91115) | 3 | Each | |
| 171 | 171 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge | |||
| 172 | 172 | 600mmx450mm size B.E mirror | 4 | Each | |
| 173 | 173 | Design Mirror(Parryware make) | 3 | Each | |
| 174 | 174 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge | |||
| 175 | 175 | Arcylec shelf | 4 | Each | |
| 176 | 176 | Corner shelf ( Jaquar make ) CAN-CHR- 1173 | 4 | Set | |
| 177 | 177 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge | |||
| 178 | 178 | 600mm long CP towel rail( Jaquar make) ACN- CHR- 1111NM | 5 | Each | |
| 179 | 179 | CP ring towel rail(Jaquar make)ACN- CHR- 1121NR | 5 | Each | |
| 180 | 180 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge | |||
| 181 | 181 | CP soap disc holder CAN- CHR- 1131.N | 14 | Each | |
| 182 | 182 | Toilet paper holder(Jaquar make)C.No-1153 | 4 | Each | |
| 183 | 183 | Towel rack 600mm long with hanger(J.make)C.No-1181N | 3 | Each | |
| 184 | 184 | Liquid Soap holder (J.Make)ACN- CHR- 1135N | 4 | Each | |
| 185 | 185 | CP Coat hook ( J.make)AKP- CHR-35761P | 4 | Each | |
| 186 | 186 | Supplying all materials, labour, T&P and filling in F&P. with sand well watered and rammed including conveyance of all materials to work site payment of royality,taxes etc.all complete as per specification and direction of the Engineer in charge | 8.03 | Cum | |
| 187 | 187 | Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge | 2.01 | Cum | |
| 188 | 188 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge | 2.01 | Cum | |
| 189 | 189 | In first floor | 0.19 | Cum | |
| 190 | 190 | Supplying all materials, labour, T&P and providing cement flush pointing (1:3) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge | 94.02 | Sqm | |
| 191 | 191 | Supplying all materials, labour, T&P and providing brick work with Fly ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge | |||
| 192 | 192 | In superstructure | 0.2 | Cum | |
| 193 | 193 | In first floor | 0.19 | Cum | |
| 194 | 194 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge | |||
| 195 | 195 | In ground floor - 1x3.00x0.70= | 2.1 | sqm | |
| 196 | 196 | Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge | |||
| 197 | 197 | In ground floor | 0.11 | Qntl | |
| 198 | 198 | Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge | |||
| 199 | 199 | In ground floor | 0.14 | Cum | |
| 200 | 200 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge | |||
| 201 | 201 | In fist floor | 7.5 | Sqm | |
| 202 | 202 | Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 3.00mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter with FRP frame of size 45x90mm of Darwaja Make or equivalent as per direction of E.I.C. | 7.88 | Sqm | |
| 203 | 203 | Fitting and fixing vetrified tiles with matt finish Kajaria ( Fog Perla) on floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost conveyance, royalities and taxes etc. all complete as per direction of Engineer in charge. (Vetrified Floor tiles of Kajaria make of size 60cm x 60cm to be pre-approved by the Engineer in charge) In Ground Floor | 20.06 | Sqm | |
| 204 | 204 | Fitting and fixing vetrified tiles of Kajaria ( Duren Marfil) to dados skirting & risers of steps on 12mm. thick C.P (1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles including cost conveyance, royalities and taxes etc. all complete as per direction of Engineer in charge. (Vetrified wall tiles of Kajaria make 60cmx30cm plain / printed series to be pre-approved by the Engineer in charge) | |||
| 205 | 205 | In ground floor | 94.02 | Sqm | |
| 206 | 206 | Supplying all materials, labour, T&P and providing granite tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc all complete as per direction of the Engineer in charge(Up to 0.40sqm) | 2.1 | sqm | |
| 207 | 207 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge. | |||
| 208 | 208 | 110mm dia U-PVC Pipe Alround Concrete | 14 | Mtr | |
| 209 | 209 | Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, Fly ash brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI/UPVC gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge | |||
| 210 | 210 | Inside size 250mmx250mm | 8 | Each | |
| 211 | 211 | Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge | |||
| 212 | 212 | Inside size 760mmx760mmx460mm | 4 | Each | |
| 213 | 213 | Sinking of 125mmx100mm size tube well through fast drilling | |||
| 214 | 214 | Sophisticated Rig (Vide A/R 2013 Page-273 to 275) | |||
| 215 | 215 | Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with DTH drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rigs with its accessories, tools and plant and consumables etc for lowering of 125mm dia G.I/P.V.C pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing of casing pipes after drilling 200mm to 400mm dia in burden portion) A) Drilling of 125mm dia bore | 60 | MTR | |
| 216 | 216 | Lowering the following size of G.I/P.V.C pipes with or without slotted pipes as per the necessity from ground level and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above. | |||
| 217 | 217 | Lowering of 125mm dia PVC pipes(Labour charges) | 60 | mtr | |
| 218 | 218 | Cost of 125mm dia ASTMD-1785/89 sch-80 pvc pipe | 55 | mtr | |
| 219 | 219 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge | |||
| 220 | 220 | By DTH Rig | 1 | Each |
AI Tender Summary
Tender Timeline
Jan 28, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 11, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 12, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender