Construction Work Of Sub Centre Asrasar Ps Bidasar
Tender Value
20.96 Lakhs
Estimated cost
Bid Submission
06 Feb 2020
0 days left
EMD
41920
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Raj. SC / ST Dev. and Corp. → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Work Of Sub Centre Asrasar Ps Bidasar
BOQ
| NAME OF WORK : CONSTRUCTION WORK OF SUB CENTRE ASRASAR PS BIDASAR | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | PART 'A' - CIVIL WORK\nSurface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 Mtr. and lift up to 1.5 Mtr.:\nAll kinds of soil | BI01010001010000000000000515BI0100001113 | 600 | Sqm |
| 2 | 2 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils | BI01010001010000000000000515BI0100001114 | 106 | Cum |
| 3 | 3 | Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. | BI01010001010000000000000515BI0100001115 | 73 | Cum |
| 4 | 4 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). | BI01010001010000000000000515BI0100001116 | 40 | Cum |
| 5 | 5 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:Cement Mortar 1:6 ( 1-Cement : 6-Sand). | BI01010001010000000000000515BI0100001117 | 103 | Cum |
| 6 | 6 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. | BI01010001010000000000000515BI0100001118 | 52 | Sqm |
| 7 | 7 | Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. \nM20 grade Nominal Mix / Design Mix | BI01010001010000000000000515BI0100001119 | 13 | Cum |
| 8 | 8 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001120 | 44 | Cum |
| 9 | 9 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. | BI01010001010000000000000515BI0100001121 | 172 | Sqm |
| 10 | 10 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.\nM20 grade Nominal Mix / Design Mix | BI01010001010000000000000515BI0100001122 | 20 | Cum |
| 11 | 11 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars (Conforming of relevent IS code) | BI01010001010000000000000515BI0100001123 | 1570 | Kg |
| 12 | 12 | Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75 Cement mortar 1 : 6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001124 | 66 | Sqm |
| 13 | 13 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). | BI01010001010000000000000515BI0100001125 | 106 | Sqm |
| 14 | 14 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). | BI01010001010000000000000515BI0100001126 | 7 | Sqm |
| 15 | 15 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' : 30 mm thick . Commercial Veneer both side | BI01010001010000000000000515BI0100001127 | 33 | Sqm |
| 16 | 16 | Extra for providing external lipping with 2nd class teak wood battens 6mm minimum depth on all edges of shutters (over all area of door shutter to be measured) over above item | BI01010001010000000000000515BI0100001128 | 33 | Sqm |
| 17 | 17 | Providing and fixing stone slabs table rubbed, 15-18 mm thick in Walls, Steps, Pillars, Counters, Jambs, Shelves, Sills etc. laid on 12mm (Av.) thick base of CM 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. | BI01010001010000000000000515BI0100001129 | ||
| 18 | 17.01 | Rajnagar 1st quality/Ageria with light spots. Above 3601 Cm2 Slabs | BI01010001010000000000000515BI0100001130 | 4.416 | Sqm |
| 19 | 17.02 | Keseriaji/ Abu Ambaji (Green Marble) Above 3601 Cm2 Slabs | BI01010001010000000000000515BI0100001131 | 5 | Sqm |
| 20 | 18 | P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. size 600 mm X 600 mm | BI01010001010000000000000515BI0100001132 | 92 | Sqm |
| 21 | 19 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) Dark shade using ordinary cement. | BI01010001010000000000000515BI0100001133 | 10 | Sqm |
| 22 | 20 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 20mm thick (Internal work ) | BI01010001010000000000000515BI0100001134 | 656 | Sqm |
| 23 | 21 | 6 mm thick cement plaster to ceiling of mix 1:3 (1 cement: 3 sand ) | BI01010001010000000000000515BI0100001135 | 98 | Sqm |
| 24 | 22 | Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete New Plastered Surface (three or more coats) | BI01010001010000000000000515BI0100001136 | 762 | Sqm |
| 25 | 23 | Distempering with 1st quality acrylic washable distemper (ready mixed) of approved manufacturer and of required shade and colour completeincluding all scaffolding as per manufacturer's specification. \nTwo or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. | BI01010001010000000000000515BI0100001137 | 385 | Sqm |
| 26 | 24 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding.\n New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). | BI01010001010000000000000515BI0100001138 | 265 | Sqm |
| 27 | 25 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work | BI01010001010000000000000515BI0100001139 | 140 | Sqm |
| 28 | 26 | Applying priming coat : With ready mix pink or gray primer of approved brand and manufacture on wood work hard and soft wood. | BI01010001010000000000000515BI0100001140 | 75 | Sqm |
| 29 | 27 | Random rubble dry stone Kharanja under floor. | BI01010001010000000000000515BI0100001141 | 19 | Cum |
| 30 | 28 | Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required : Partly fixed and partly openable [ fixed area not to exceed 33%] | BI01010001010000000000000515BI0100001142 | 20 | Sqm |
| 31 | 29 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. | BI01010001010000000000000515BI0100001143 | 20 | Sqm |
| 32 | 30 | Providing and fixing Square bars or other flat welded to window, ventilatiors etc. | BI01010001010000000000000515BI0100001144 | 200 | Kg |
| 33 | 31 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : | BI01010001010000000000000515BI0100001145 | 50 | rmt |
| 34 | 32 | Grading for roof water proofing treatment with: \nCement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) with water proof compound as per manufacture's specification. | BI01010001010000000000000515BI0100001146 | 8 | Cum |
| 35 | 33 | Providing and fixing in cement sand mortar 1 : 4 single paitam (rebated) stone doors windows and ventilator frames of approved quarry : Size 100 x 60mm | BI01010001010000000000000515BI0100001147 | 103 | rmt |
| 36 | 34 | Providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. M15 grade Nominal Mix \n1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). | BI01010001010000000000000515BI0100001148 | 4 | Cum |
| 37 | 35 | Stone slab roofing on ground floor with fine grained stone slab from approved quarry including filling of joints of parapet and slab on both sides in cement sand mortar 1:4, with ceiling pointing in cement sand mortar 1 : 3 complete as per specification and instruction of Engineer In Charge | BI01010001010000000000000515BI0100001149 | 8.5 | Sqm |
| 38 | 36 | Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges : | BI01010001010000000000000515BI0100001150 | ||
| 39 | 36.01 | Sand or other approved stone 25mm thick. | BI01010001010000000000000515BI0100001151 | 8 | Sqm |
| 40 | 36.02 | Kota stone minimum 30mm thick. | BI01010001010000000000000515BI0100001152 | 15 | Sqm |
| 41 | 37 | Making grooves as per design in plaster 10mm to 20mm wide. | BI01010001010000000000000515BI0100001153 | 200 | rmt |
| 42 | 38 | Supply and fixing in cement mortar welded hand railing made out of MS round or square bars, flats etc. for staircase or verandah as per design complete in all respect (wooden or PVC hand railing to be paid extra) with priming coat of red oxide. Extra for providing D type pipe head as top of hand railing | BI01010001010000000000000515BI0100001154 | 150 | Kg |
| 43 | 39 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Good quality South Black Above 3601 Cm2 Slabs | BI01010001010000000000000515BI0100001155 | 15 | Sqm |
| 44 | 40 | Extra for providing edge moulding to 15-18mm thick marble/ Granite/Kota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. | BI01010001010000000000000515BI0100001156 | ||
| 45 | 40.01 | Marble work Full Edge moulding | BI01010001010000000000000515BI0100001157 | 50 | Mtr. |
| 46 | 40.02 | Granite/Kota Stone Work Full Edge moulding | BI01010001010000000000000515BI0100001158 | 50 | Mtr. |
| 47 | 41 | Providing and laying of paver block as per IS 15658 : 2006 (Indian standard for precast concrete block for paving- specification) and IRC : SP:63-2004 (guidelines for the use of interlocking concrete block pavement) M-35,60mm thick to be used in light traffic (Light traffic is defined as a daily traffic up to 150 commercial vehicles exceeding 30 KN laden weight, or an equivalent up to 0.5 million standard axles (MSA) for a design life of 20 years (A standard axle is defined as a single axle load of 81.6 KN) like pedestrian plazas, shopping complexes ramps, car parks, office driveways , housing colonies, office complexes, rural roads with low volume traffic, farm houses , beach sites, tourist resorts, local authority footways, residential roads, etc. Category ‘B’ Denated only two side like I,Z,T shape etc. as per IRC SP 63:2004 | BI01010001010000000000000515BI0100001159 | 150 | Sqm |
| 48 | 42 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide Extra if square,rectangular hollow tubelar sections are used or grill made by flats only | BI01010001010000000000000515BI0100001160 | 150 | Kg |
| 49 | 43 | PART- B: SANITARY WORK\nP & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 580x440mm. | BI01010001010000000000000515BI0100001161 | 2 | Each |
| 50 | 44 | P & F G.I. pipes (Internal Work) with G.I. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors: Exposed on wall 15mm dia nominal bore ''B' Class | BI01010001010000000000000515BI0100001162 | 30 | Mtr. |
| 51 | 45 | P & F G.I. pipes (Internal Work) with G.I. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors: 25mm dia nominal bore ''B' Class | BI01010001010000000000000515BI0100001163 | 20 | Mtr. |
| 52 | 46 | P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc. | BI01010001010000000000000515BI0100001164 | ||
| 53 | 46.01 | 15mm dia nominal bore ''B' Class | BI01010001010000000000000515BI0100001165 | 30 | Mtr. |
| 54 | 46.02 | 25mm dia nominal bore ''B' Class | BI01010001010000000000000515BI0100001166 | 12 | Mtr. |
| 55 | 47 | Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size : | BI01010001010000000000000515BI0100001167 | ||
| 56 | 47.01 | 15mm dia nominal bore | BI01010001010000000000000515BI0100001168 | 10 | Each |
| 57 | 47.02 | 25mm dia nominal bore | BI01010001010000000000000515BI0100001169 | 10 | Each |
| 58 | 48 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: | BI01010001010000000000000515BI0100001170 | ||
| 59 | 48.01 | C.P. Brass bib cock,15mm nominal bore. | BI01010001010000000000000515BI0100001171 | 3 | Each |
| 60 | 48.02 | (-do-) Long body, 15mm nominal bore weight not less than 690 gm | BI01010001010000000000000515BI0100001172 | 6 | Each |
| 61 | 49 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : Brass wt. Not less than 300 gm,15mm. | BI01010001010000000000000515BI0100001173 | 3 | Each |
| 62 | 50 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. ---do--- with 37 cm long pipe and nut. | BI01010001010000000000000515BI0100001174 | 6 | Each |
| 63 | 51 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : | BI01010001010000000000000515BI0100001175 | ||
| 64 | 51.01 | Gun-metal 15mm nominal bore. | BI01010001010000000000000515BI0100001176 | 4 | Each |
| 65 | 51.02 | (-do-) 25mm nominal bore. | BI01010001010000000000000515BI0100001177 | 4 | Each |
| 66 | 52 | Construction of Cement Concrete Chamber 125mm dia. | BI01010001010000000000000515BI0100001178 | 10 | Each |
| 67 | 53 | P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, \n1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & \n32 mm C.P. brass waste coupling of approved make,\n25 mm G.I. waste pipe complete including cutting & making good the wall.: Size 550 mm x 400 mm | BI01010001010000000000000515BI0100001179 | 3 | Each |
| 68 | 54 | P & F PVC Storage Tank (IS : 12701marked indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: | BI01010001010000000000000515BI0100001180 | ||
| 69 | 54.01 | 500 litres capacity. | BI01010001010000000000000515BI0100001181 | 2 | Each |
| 70 | 54.02 | Hoisting Charges for each floor : 500 litres capacity. | BI01010001010000000000000515BI0100001182 | 2 | Each |
| 71 | 55 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make | BI01010001010000000000000515BI0100001183 | ||
| 72 | 55.01 | 110 mm dia | BI01010001010000000000000515BI0100001184 | 40 | Mtr. |
| 73 | 55.02 | 75 mm dia | BI01010001010000000000000515BI0100001185 | 15 | Mtr. |
| 74 | 56 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make | BI01010001010000000000000515BI0100001186 | ||
| 75 | 56.01 | Nahni trap without Jali 4\", 110mm dia | BI01010001010000000000000515BI0100001187 | 10 | Each |
| 76 | 56.02 | Bend 87.5Dg. 75 mm Dia | BI01010001010000000000000515BI0100001188 | 10 | Each |
| 77 | 56.03 | Bend 87.5Dg. 110 mm Dia | BI01010001010000000000000515BI0100001189 | 20 | Each |
| 78 | 57 | Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C floor & RCC slab covering with M15 grade c.c. floor, 50 mm thick stone slab partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos stone foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:- Size 200x100x130 cm.(for 10 users) with 115 mm thick RCC (M-20) slab with Tor steel reinforcement 8mm ? @15 cm c/c bothways including shuttering complete in all respect. | BI01010001010000000000000515BI0100001190 | 1 | Each |
| 79 | 58 | Construction of soakage well in all type of soil with 300 mm thick dry masonry, top and bottom 300 mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring , earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr.: Size 240 Cm. dia outside & 240 Cm. depth. | BI01010001010000000000000515BI0100001191 | 1 | Each |
| 80 | 59 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complet | BI01010001010000000000000515BI0100001192 | ||
| 81 | 59.01 | Inside size 300 X 300 mm depth upto 0.5 M Cement cover with frame. | BI01010001010000000000000515BI0100001193 | 4 | Each |
| 82 | 59.02 | -do- size 450 x 450mm depth upto 0.5 M Cement cover with frame | BI01010001010000000000000515BI0100001194 | 4 | Each |
| 83 | 60 | Construction of manhole in all type of soil inner size 90 X 60 Cm. 450 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. Depth up to 0.5 M | BI01010001010000000000000515BI0100001195 | 1 | Each |
| 84 | 61 | Providing & Laying C.C. 1:5:10 (Stone aggregate 40mm nominal size) upto haunches of S.W. pipes including 150 mm thick bed concrete (Width W= Dia of pipe in Cm+ 30Cm.) concrete width to be reduced from width W at center of pipe to `0` at top of pipe. (Excluding cost of pipe) 100mm dia S.W. pipe | BI01010001010000000000000515BI0100001196 | 20 | Mtr. |
| 85 | 62 | P & F Kitchen & Lab. Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor :1.0 mm thick Salem stainless steel AISI -304 kitchen sink of approved make (Nirali, Neel – kanth, Jaina, Faber-Castell ) with large waste coupling.22x18x7 20x16x7 | BI01010001010000000000000515BI0100001197 | 2 | Each |
| 86 | 63 | P & F Flush Cock / Flush Valve (IS : 9758 Mark) for WC of approved quality make : (-do-)exposed 25mm nominal bore. | BI01010001010000000000000515BI0100001198 | 2 | Each |
| 87 | 64 | P & F Towel Rail or Ring of approved quality/make: | BI01010001010000000000000515BI0100001199 | ||
| 88 | 64.01 | C.P. brass Towel Rail elbow type with concealed screws size 600 mm (Heavy duty). | BI01010001010000000000000515BI0100001200 | 3 | Each |
| 89 | 64.02 | C.P. Brass Towel Ring revolving type | BI01010001010000000000000515BI0100001201 | 3 | Each |
| 90 | 65 | P & F Soap Dish or Tray of approved quality/make C.P. brass heavy and superior quality. | BI01010001010000000000000515BI0100001202 | 4 | Each |
| 91 | 66 | P & F Looking Mirrors with P.V.C. frame of approved (Atul, Modi Guard , Saint Gobin or equivalent) Size 500x400mm | BI01010001010000000000000515BI0100001203 | 3 | Each |
| 92 | 67 | PART - 'C' ELECTRICAL WORKS\nWiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,Hot Dipped Galvanized Modular Box with earth terminal, 6 A Modular switch,Modular plate with grid plate, screws, making connections, testing etc. as required. gr1 | BI01010001010000000000000515BI0100001204 | ||
| 93 | 67.01 | Short point (up to 3 mtr.) | BI01010001010000000000000515BI0100001205 | 15 | P. point |
| 94 | 67.02 | Medium point (up to 6 mtr.) | BI01010001010000000000000515BI0100001206 | 32 | P. point |
| 95 | 67.03 | Long point (up to 10 mtr..) | BI01010001010000000000000515BI0100001207 | 18 | P. point |
| 96 | 68 | Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal, 6 A modular switch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as required. gr1 On board | BI01010001010000000000000515BI0100001208 | 12 | P. point |
| 97 | 69 | Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost of modular 16 amp. Switch and socket outlet , making connection , testing , etc. as required. gr1 | BI01010001010000000000000515BI0100001209 | 12 | Each |
| 98 | 70 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required.G1 | BI01010001010000000000000515BI0100001210 | ||
| 99 | 70.01 | 2 x 2.5 sq. mm. + 1x1.5sqmm | BI01010001010000000000000515BI0100001211 | 140 | Mtr. |
| 100 | 70.02 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. | BI01010001010000000000000515BI0100001212 | 160 | Mtr. |
| 101 | 70.03 | 2 x 6.0 sq. mm. + 1 x 2.5 sq. mm. | BI01010001010000000000000515BI0100001213 | 15 | Mtr. |
| 102 | 71 | P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with copper bus bar, shorting link , neutral link, earth link and din bar, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required.G1 Double door (single phase) 16 Way | BI01010001010000000000000515BI0100001214 | 1 | Each |
| 103 | 72 | P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required.GROUP 1 Single pole MCB 6 A to 32 A rating | BI01010001010000000000000515BI0100001215 | 6 | Each |
| 104 | 73 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall and making good the same as required.GROUP 1 | BI01010001010000000000000515BI0100001216 | ||
| 105 | 73.01 | 20 mm | BI01010001010000000000000515BI0100001217 | 125 | R. mtr. |
| 106 | 73.02 | 25 mm | BI01010001010000000000000515BI0100001218 | 100 | R. mtr. |
| 107 | 74 | P & F phenolic laminated sheet 2.0 mm thick of size 75 mm dia. Including screws, cup washer as required. | BI01010001010000000000000515BI0100001219 | 15 | Each |
| 108 | 75 | P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required | BI01010001010000000000000515BI0100001220 | ||
| 109 | 75.01 | 5 step fan regulator 2 Module | BI01010001010000000000000515BI0100001221 | 7 | Each |
| 110 | 75.02 | Blanking plate | BI01010001010000000000000515BI0100001222 | 15 | Each |
| 111 | 75.03 | 25 Amp. 2 Module Socket | BI01010001010000000000000515BI0100001223 | 1 | Each |
| 112 | 75.04 | 25 Amp. 2 Module Motor Starter with on / off Push button | BI01010001010000000000000515BI0100001224 | 1 | Each |
| 113 | 76 | Making of hole in wall of required size for housing exhaust fan and making good the same, with cement plaster as required of following size: Up to 457 mm size | BI01010001010000000000000515BI0100001225 | 5 | Each |
| 114 | 77 | P & F 18 swg M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . | BI01010001010000000000000515BI0100001226 | 7 | Each |
| 115 | 78 | P&F of Heavy duty capacitor start 900/1400 RPM single phase ISI marked Exhaust fan,IS:2312 marked in existing opening including making connections testing etc. as required.GROUP 1 300 mm sweep(900/1400 RPM) | BI01010001010000000000000515BI0100001227 | 1 | Each |
| 116 | 79 | P & F of Gravity Louver shutter of superior quality made out of frame of 18 swg M.S. sheet & Louvers made from 24 swg MS Sheet with enamel paint including cost of nuts, bolts, etc as reqd. Up to 380 mm size | BI01010001010000000000000515BI0100001228 | 1 | Each |
| 117 | 80 | P & F of IP20 LED batten type light fixture made from CRCA sheet steel housing suitable for moutning LED tube system (integral driver), Power Consumption of 18W / 36W 1500-3000 lumens, system lumen efficiency 80 lm/Watt output, life time of 50,000 burning hours with 70% initial lumen maintained. CCT 3000°K, 4000°K & 6000°K.. Gr1 4' LED Tube shape fixture 18W | BI01010001010000000000000515BI0100001229 | 4 | Each |
| 118 | 81 | P & F Star rated double ball bearing capacitor start, aluminium body & blade ceiling fan with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required.G1 1200 mm Sweep 5 Star rated | BI01010001010000000000000515BI0100001230 | 7 | Each |
| 119 | 82 | P&F of Double ball bearing, capacitor start single phase metallic blade fresh air fan, in existing opening including cost of hardware , flexible copper conductor ,making connections, testing etc. as required.Group1 225 mm sweep | BI01010001010000000000000515BI0100001231 | 2 | Each |
| 120 | 83 | P&F of recessed mounting heavy duty sheet steel End Box for distribution boerd duly phophatised powder coated complete as requiredGroup 1 For TPN 6way DB | BI01010001010000000000000515BI0100001232 | 1 | Each |
| 121 | 84 | P/Laying P.V.C. insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I of Group2of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.GROUP 1 (armoured) In existing RCC/HUME/STONEWARE PIPE 10.0 Sq.mm 2 core | BI01010001010000000000000515BI0100001233 | 60 | Mtr. |
| 122 | 85 | Mainteneance free Gel Earthing with copper Earth ectrode of size50 mm x 2 m by embodying 2.5 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and c.c finished chamber coverd with hinged type with locking arraangment C.I cover ,C.I frame of size 300mm x 300mm complete with filling of ash gel compound (dharken or equivelent approved make), testing of earth resistance as required. with Strip in Pipe Technology with 80 - 100 micron GI Coating GI pipe 2000 mm long , 63 / 80 mm , Inner strip 50 mm x 3 mm copper | BI01010001010000000000000515BI0100001234 | 1 | Each |
| 123 | 86 | S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 8 SWG copper wire | BI01010001010000000000000515BI0100001235 | 12 | Mtr. |
| 124 | 87 | P & F IP-65 / IP-66 protected LED street light luminaire on existing bracket. Fixture made from powder coated single piece pressure die cast aluminium housing with Heat dissipation fins on housing with High Power LEDs of CREE / NICHIA / OSRAM / PHILIPS make. DIffuser / Glass cover for ensuring IP65 protection for Lamp & control gear compartment, System Lumen output of 1500 - 8500 High Power LED. Integrated Driver shall be high efficiency having efficiency > 85% and in compliance to IEC standards System life of 25,000 Burning Hours with 70% of initial Lumens maintained. Fixture shall be in CE Compliance. Gr1 IP - 65 Protected LED Street Light Luminaire LED Street Light fixture 20-25 Watt | BI01010001010000000000000515BI0100001236 | 2 | Each |
| 125 | 88 | S & F of Street light bracket made out from following size of ' B ' class GI pipe with heavy duty pole clamp, Saddles suitable fastners etc. as required. 25 mm Dia. | BI01010001010000000000000515BI0100001237 | 4 | Mtr. |
| 126 | 89 | P & F ISI marked ding dong/musical chime bell including making connection testing etc. as required. | BI01010001010000000000000515BI0100001238 | 1 | Each |
| 127 | 90 | P & F following size mounting grid plates with cover plates 4 Module | BI01010001010000000000000515BI0100001239 | 1 | Each |
| 128 | 91 | P & F following size hot dip galvanized M.S. box of 20 SWG with earthing terminal in recess/ surface suitable for modular accessories as required. 4 Module | BI01010001010000000000000515BI0100001240 | 1 | Each |
| 129 | 92 | P & F of IP20 LED Recessed / Surface Mounted, Round / Sqaure Non-Dimmable Downlight with die-cast aluminum housing & Heat Sink for heat dissipation, high purity reflector with external driver having efficiency > 85% and in compliance to IEC standards. Power Consumption of = 7W/ 10W / 15W / 18W with ~ 500 / 750 / 1100 / 1250 lumens, System Lumen efficacy of 70 lm / watt output suitable to replace 1x18W / 2x18W / 2x 26W CFL Downlights, life time of 50000 Burning Hours with 70% of intial Lumen maintaned. CCT 3000°K , 4000°K & 6000°K. Fixture shall be CE compliance. Gr1 Surface Mounting LED Downlight 18/20W | BI01010001010000000000000515BI0100001241 | 2 | Each |
| 130 | 93 | SITC of ISI mark( IS:8472) self priming monoblock pump set of approved make, TEFC, permanent split capacitor type (PSC), fitted with thermal overload protection, mechanical seal, 1440/1500 RPM, single phase(180 to 240 V). Including cost of hardware etc on existing platform complete. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively. gr1 Self priming pumps 0.5 HP, 1-Ø, (6-28)Mtr, (45-7.5)LPM | BI01010001010000000000000515BI0100001242 | 1 | Each |
| 131 | 94 | Supply & Fixing ISI marked ( IS : 15683 ) Portable Fire Exitnguisher, ABC type,finished externally with red enamel paint, complete in all respects including initial fill and wall suspension of following capacity. 4 kg | BI01010001010000000000000515BI0100001243 | 2 | Each |
| 132 | 95 | P&F 240/415 V isolator conforming to IS:13947-III/ IEC 60947-3 on existing board / sheet including making connections, testing etc. as required. Double pole isolator 30 A / 40 A rating | BI01010001010000000000000515BI0100001244 | 1 | Each |
AI Tender Summary
Tender Timeline
Jan 27, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 06, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 07, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender