| 1 |
1 |
PART-I (E&M Works) |
|
|
|
| 2 |
1.01 |
XLPE insulated, armoured, heavy duty electric cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 10 Sqmm 2 core laid in trenches or passing through pipes/ducts or fixed to walls/poles including taking down old u/s cable, complete all as specified. \nNOTE:(Earth work, brick protection and sand cushioning shall be measured and paid for separately).\nMake: Finolex/Havells/Polycab |
|
40 |
RM |
| 3 |
1.02 |
XLPE insulated, armoured, heavy duty electric cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 16 Sqmm 2 core laid in trenches or passing through pipes/ducts or fixed to walls/poles including taking down old u/s cable, complete all as specified. \nNOTE:(Earth work, brick protection and sand cushioning shall be measured and paid for separately).\nMake: Finolex/Havells/Polycab |
|
40 |
RM |
| 4 |
1.03 |
XLPE insulated, armoured, heavy duty electric cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 16 Sqmm 4 core laid in trenches or passing through pipes/ducts or fixed to walls/poles including taking down old u/s cable, complete all as specified. \nNOTE:(Earth work, brick protection and sand cushioning shall be measured and paid for separately).\nMake: Finolex/Havells/Polycab |
|
40 |
RM |
| 5 |
1.04 |
XLPE insulated, armoured, heavy duty electric cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 35Sqmm 3.5 core laid in trenches or passing through pipes/ducts or fixed to walls/poles including taking down old u/s cable, complete all as specified. \nNOTE:(Earth work, brick protection and sand cushioning shall be measured and paid for separately).\nMake: Finolex/Havells/Polycab |
|
40 |
RM |
| 6 |
1.05 |
XLPE insulated, armoured, heavy duty electric cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 50 Sqmm 3.5 core laid in trenches or passing through pipes/ducts or fixed to walls/poles including taking down old u/s cable, complete all as specified. \nNOTE:(Earth work, brick protection and sand cushioning shall be measured and paid for separately).\nMake: Finolex/Havells/Polycab |
|
40 |
RM |
| 7 |
1.06 |
XLPE insulated, armoured, heavy duty electric cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 95 Sqmm 3.5 core laid in trenches or passing through pipes/ducts or fixed to walls/poles including taking down old u/s cable, complete all as specified. \nNOTE:(Earth work, brick protection and sand cushioning shall be measured and paid for separately).\nMake: Finolex/Havells/Polycab |
|
40 |
RM |
| 8 |
1.07 |
XLPE insulated, armoured, heavy duty electric cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 120 Sqmm 3.5 core laid in trenches or passing through pipes/ducts or fixed to walls/poles including taking down old u/s cable, complete all as specified. \nNOTE:(Earth work, brick protection and sand cushioning shall be measured and paid for separately).\nMake: Finolex/Havells/Polycab |
|
40 |
RM |
| 9 |
1.08 |
GI tubing light grade 80 mm bore for fixing along the pole / wall including fixing clamps, bolts, nuts made of GI flat strip of size 40x4mm etc for protection of cable complete all as specified and directed .\nMake: Jindal/Prakash Surya/Tata\n |
|
3 |
RM |
| 10 |
1.09 |
GI tubing light grade 50 mm bore for fixing along the pole / wall including fixing clamps, bolts, nuts made of GI flat strip of size 40x4mm etc for protection of cable complete all as specified and directed .\nMake: Jindal/Prakash Surya/Tata\n |
|
3 |
RM |
| 11 |
1.1 |
GI tubing light grade 40 mm bore for fixing along the pole / wall including fixing clamps, bolts, nuts made of GI flat strip of size 40x4mm etc for protection of cable complete all as specified and directed .\nMake: Jindal/Prakash Surya/Tata\n |
|
3 |
RM |
| 12 |
1.11 |
Aluminium cable thimbles of size 120 Sqmm for UG Cable including connection and crimping in replacement complete all as specified and directed .\n Make : Jaipuriya/Rastriya/Dowells |
|
20 |
Each |
| 13 |
1.12 |
Aluminium cable thimbles of size 95 Sqmm for UG Cable including connection and crimping in replacement complete all as specified and directed .\n Make : Jaipuriya/Rastriya/Dowells |
|
60 |
Each |
| 14 |
1.13 |
Aluminium cable thimbles of size 50 Sqmm for UG Cable including connection and crimping in replacement complete all as specified and directed .\n Make : Jaipuriya/Rastriya/Dowells |
|
50 |
Each |
| 15 |
1.14 |
Aluminium cable thimbles of size 35 Sqmm for UG Cable including connection and crimping in replacement complete all as specified and directed .\n Make : Jaipuriya/Rastriya/Dowells |
|
60 |
Each |
| 16 |
1.15 |
Aluminium cable thimbles of size 25 Sqmm for UG Cable including connection and crimping in replacement complete all as specified and directed .\n Make : Jaipuriya/Rastriya/Dowells |
|
30 |
Each |
| 17 |
1.16 |
Aluminium cable thimbles of size 16 Sqmm for UG Cable including connection and crimping in replacement complete all as specified and directed .\n Make : Jaipuriya/Rastriya/Dowells |
|
30 |
Each |
| 18 |
1.17 |
Aluminium cable thimbles of size 10 Sqmm for UG Cable including connection and crimping in replacement complete all as specified and directed .\n Make : Jaipuriya/Rastriya/Dowells |
|
30 |
Each |
| 19 |
1.18 |
Electronic driver (Printed circuit board) suitable for 150 watt LED street/flood light fitting input voltage 230 Volt 50 HZ AC in replacement complete all as specified and directed . \nMake : Havells/CG/Bajaj.\nNote : The make of electronic driver should be match with the make of LED light fitting installed at site and the contractor should visit the site before quoting the rates so as to avoid the ambiquity during execution stage. |
|
10 |
Each |
| 20 |
1.19 |
Electronic driver (Printed circuit board) suitable for 120 watt LED street/flood light fitting input voltage 230 Volt 50 HZ AC in replacement complete all as specified and directed . \nMake : Havells/CG/Bajaj.\nNote : The make of electronic driver should be match with the make of LED light fitting installed at site and the contractor should visit the site before quoting the rates so as to avoid the ambiquity during execution stage. |
|
20 |
Each |
| 21 |
1.2 |
Electronic driver (Printed circuit board) suitable for 90 watt LED street/flood light fitting input voltage 230 Volt 50 HZ AC in replacement complete all as specified and directed . \nMake : Havells/CG/Bajaj.\nNote : The make of electronic driver should be match with the make of LED light fitting installed at site and the contractor should visit the site before quoting the rates so as to avoid the ambiquity during execution stage. |
|
3 |
Each |
| 22 |
1.21 |
Electronic driver (Printed circuit board) suitable for 80 watt LED street/flood light fitting input voltage 230 Volt 50 HZ AC in replacement complete all as specified and directed . \nMake : Havells/CG/Bajaj.\nNote : The make of electronic driver should be match with the make of LED light fitting installed at site and the contractor should visit the site before quoting the rates so as to avoid the ambiquity during execution stage. |
|
3 |
Each |
| 23 |
1.22 |
Electronic driver (Printed circuit board) suitable for 45 watt LED street/flood light fitting input voltage 230 Volt 50 HZ AC in replacement complete all as specified and directed . \nMake : Havells/CG/Bajaj.\nNote : The make of electronic driver should be match with the make of LED light fitting installed at site and the contractor should visit the site before quoting the rates so as to avoid the ambiquity during execution stage. |
|
5 |
Each |
| 24 |
1.23 |
Endura Cylinder Neo / Neo N 120W Neo N 5700K, New generation energy & environment friendly long life Versatile pressure die -cast aluminium IP66 roadway luminaire with high power LED as light source complete including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified and directed . \nMake: Havells Cat Part No. LHETAXU7PA6J120 or eqivalent in Philips/Crompton. |
|
2 |
Each |
| 25 |
1.24 |
Off load change over switch 400 Amps 415 volts 4 pole, 50 Hz in sheet metal enclosure with out side handle operated and fixed including taking down old, complete all as specified and directed . \nMake: Seimens/Havells/Control & switchgear/ABB |
|
1 |
Each |
| 26 |
1.25 |
Off load change over switch 250 Amps 415 volts 4 pole, 50 Hz in sheet metal enclosure with out side handle operated and fixed including taking down old, complete all as specified and directed . \nMake: Seimens/Havells/Control & switchgear/ABB |
|
1 |
Each |
| 27 |
1.26 |
Off load change over switch 200 Amps 415 volts 4 pole, 50 Hz in sheet metal enclosure with out side handle operated and fixed including taking down old, complete all as specified and directed . \nMake: Seimens/Havells/Control & switchgear/ABB |
|
1 |
Each |
| 28 |
1.27 |
Off load change over switch 100 Amps 415 volts 4 pole, 50 Hz in sheet metal enclosure with out side handle operated and fixed including taking down old, complete all as specified and directed . \nMake: Seimens/Havells/Control & switchgear/ABB |
|
1 |
Each |
| 29 |
1.28 |
On load change over switch 125 Amps 415 volts 4 pole, 50 Hz open execution type with rotary type handle operated and fixed including taking down old, complete all as directed.\nMake: Seimens/Havells/Control & switchgear/ABB |
|
2 |
Each |
| 30 |
1.29 |
On load change over switch 100 Amps 415 volts 4 pole, 50 Hz open execution type with rotary type handle operated and fixed including taking down old, complete all as directed.\nMake: Seimens/Havells/Control & switchgear/ABB |
|
2 |
Each |
| 31 |
1.3 |
On load change over switch 63 Amps 415 volts 4 pole, 50 Hz open execution type with rotary type handle operated and fixed including taking down old, complete all as directed.\nMake: Seimens/Havells/Control & switchgear/ABB |
|
2 |
Each |
| 32 |
1.31 |
MCCB 4 pole adjustable type 250 Amps, repturing capacity 36 KA for 415 volts including taking down old MCCB, complete all as specified.\nMake: Seimens/Havells/Control & switchgear/ABB |
|
1 |
Each |
| 33 |
1.32 |
MCCB 4 pole adjustable type 200 Amps, repturing capacity 36 KA for 415 volts including taking down old MCCB, complete all as specified.\nMake: Seimens/Havells/Control & switchgear/ABB |
|
1 |
Each |
| 34 |
1.33 |
MCCB 4 pole adjustable type 160 Amps, repturing capacity 36 KA for 415 volts including taking down old MCCB, complete all as specified.\nMake: Seimens/Havells/Control & switchgear/ABB |
|
1 |
Each |
| 35 |
1.34 |
MCCB 4 pole adjustable type 100 Amps, repturing capacity 36 KA for 415 volts including taking down old MCCB, complete all as specified.\nMake: Seimens/Havells/Control & switchgear/ABB |
|
1 |
Each |
| 36 |
1.35 |
Dismantling and taking out self starter assembly suitable for 100 KVA DG Set and replacement of wornout spare parts like field coil, armature assembly, solenoid assembly, corbon brush, corbon brush assembly, clutch plate assembly and bushes including servising and refixing to engine complete all as specified and directed . |
|
1 |
Each\nJob |
| 37 |
1.36 |
Dismantling and taking out self starter assembly suitable for 62.5 KVA DG Set and replacement of wornout spare parts like field coil, armature assembly, solenoid assembly, corbon brush, corbon brush assembly, clutch plate assembly and bushes including serviceing and refixing to engine complete all as specified and directed . |
|
1 |
Each\nJob |
| 38 |
1.37 |
Dismantling and taking out battery charging alternater assembly suitable for 100 KVA DG Set and replacement of wornout spare parts like field coil, rotor assembly, corbon brush, rectifier assembly and bushes etc including serviceing and refixing complete all as specified and directed . |
|
1 |
Each\nJob |
| 39 |
1.38 |
Dismantling and taking out battery charging alternater assembly suitable for 62.5 KVA DG Set and replacement of wornout spare parts like field coil, rotor assembly, corbon brush, rectifier assembly and bushes etc including serviceing and refixing complete all as specified and directed . |
|
1 |
Each\nJob |
| 40 |
1.39 |
Dismantling and taking out fuel injector pump assembly suitable for 100 KVA DG Set and complete overhauling of FIP including replacement of unserviceable parts like rebuild overhauling kit, rebuild seal kit, fuel injector 'O' rings, OEM gaskets, spring gasket injector, valve bearing etc complete all as specified and directed . |
|
1 |
Each\nJob |
| 41 |
1.4 |
Dismantling and taking out fuel injector pump assembly suitable for 62.5 KVA DG Set and complete overhauling of FIP including replacement of unserviceable parts like rebuild overhauling kit, rebuild seal kit, fuel injector 'O' rings, OEM gaskets, spring gasket injector, valve bearing etc complete all as specified and directed . |
|
1 |
Each\nJob |
| 42 |
1.41 |
Supply and fix in replacement Self starter assembly 12V suitable for 100 KVA DG Set complete all as Specified and directed. \nMake MICO/LUCAS/BOSCH |
|
1 |
Each |
| 43 |
1.42 |
Supply and fix in replacement Banded cogged belt (2JAX51-LP-1326) complete all as specified and directed .\nCat part No - 06.032.03.0.00 |
|
1 |
Each |
| 44 |
1.43 |
Supply and fix in replacement V Belt (A-47) 1227 length complete all as specified and directed. \nCat part No - 04.140.01.0.00 |
|
1 |
Each |
| 45 |
1.44 |
Supply and fix in replacement Fuel pipe (7.5, 14x14B, 700 PB) complete all as specified and directed.\nCat part No - 34.151.04.0.00 |
|
3 |
Each |
| 46 |
1.45 |
Supply and fix in replacement Silencer assembly complete all as specified and directed.\n Cat part No - 48.318.10.0.00 |
|
1 |
Each |
| 47 |
1.46 |
Supply and fix in replacement Rubber hose for air intake complete all as specified and directedC\ncat part No - 48.464.02.0.00 |
|
1 |
Each |
| 48 |
1.47 |
Diconnecting the input and output electric supply from automatic voltage stabiliser of any capacity and taking out from Palma and shifting to civil workshop Rajouri (about 20 KMs away from Palma) for carrying out repair works.\nNote:- The rate quoted by the contractor shall incude the rate for T&P, transportation and necessary men power required during loading and unloading. |
|
2 |
Each Job |
| 49 |
1.48 |
Opening the top cover of votage stabiliser taking out the complete servo stabiliser oil and keep it for reuse and taking out dimmer assembly and transformer assembly for checking the defects and carrying out the following repairs:- |
|
2 |
Each Job |
| 50 |
1.49 |
Supply and fix in replacement Dimmerstate unit of capacity 50 KVA servo voltage stabilizer 28 amps of Make Volina complete all as specified and directed. |
|
2 |
Each |
| 51 |
1.5 |
Supply and fix in replacement main transformer of capacity 50 KVA servo voltage stabilizer of make Volina complete all as specified and directed. |
|
2 |
Each |
| 52 |
1.51 |
Supply and fixing in replacement Electronic circuit board (Printed circuit board) for controlling of synchronous motor of torque 10 KG and auto/manual under voltage high voltage operation complete all as specified and directed. |
|
2 |
Each\n |
| 53 |
1.52 |
Supply and fix in replacement PCB holder complete all as specified and directed. |
|
2 |
Each |
| 54 |
1.53 |
Supply and fixing in replacement trigger transformer complete all as specified and directed. |
|
2 |
Each |
| 55 |
1.54 |
Supply and fixing in replacement panel lamps alongwith connecting leads for over voltage under voltage etc.complete all as specified and directed. |
|
6 |
Each |
| 56 |
1.55 |
Supply and fix in replacement corbon brush complete all as specified and directed. |
|
2 |
Each |
| 57 |
1.56 |
Supply and fix in replacement digital volt meter 72 x 72 mm complete all as specified and directed. |
|
3 |
Each |
| 58 |
1.57 |
supply and fixing in replacement servo motor 10 KG torque complete all as specified and directed. |
|
1 |
Each |
| 59 |
1.58 |
Supply and fixing in replacement RC network for 10 KG servo motor complete all as specified and directed. |
|
2 |
Each |
| 60 |
1.59 |
Supply and fix in replacement auto manual switch complete all as specified and directed. |
|
2 |
Each |
| 61 |
1.6 |
Dimantling and taking out ceiling fan 230 volts 1200/1400mm sweep any make cutting the old burnt winding rewinding with new super enamelled copper wire as existing guage including insertion of insulating papers threading and insulating with insulating warnish, lathe work, replacement of 2.25/3.15 MFD capacitor, replacement of MS split clamp 02 nos with rubber reel complete all as specified and as directed. |
|
40 |
Each |
| 62 |
1.61 |
Supply and fixing in replacement of ball bearing of size 6200 to 6204 suitable for ceiling fan 1200/1400mm sweep complete all as specified and as directed.\n. Make :- NBC/SKF |
|
20 |
Each |
| 63 |
1.62 |
Dimantling and taking out Exhaust fan 230 volts 200 to 450mm sweep any make cutting the old burnt winding rewinding with new super enamelled copper wire as existing guage including insertion of insulating papers threading and insulating with insulating warnish, lathe work, replacement of capacitor, replacement of gun metal bushes complete all as specified and as directed. |
|
10 |
Each |
| 64 |
1.63 |
Supply and fixing in replacement heating element any shape of capacity 1.5/2 KW 230 volt AC supply for electric storage type water heater complete all as specified and directed.\n Make:- Racold/Bajaj/Havells. |
|
40 |
Each |
| 65 |
1.64 |
Supply and fix in replacement inner MS water storage tank suitable for 15 ltr storage type water heater complete all as specified and as directed..\n Make:- Racold/Bajaj/Havells. |
|
3 |
Each |
| 66 |
1.65 |
Supply and fix in replacement inner MS water storage tank suitable for 25 ltr storage type water heater complete all as specified and as directed..\n Make:- Racold/Bajaj/Havells. |
|
2 |
Each |
| 67 |
1.66 |
Supply and fix in replacement inner MS water storage tank suitable for 35 ltr storage type water heater complete all as specified and as directed..\n Make:- Racold/Bajaj/Havells. |
|
1 |
Each |
| 68 |
1.67 |
Supply and fix in replacement Thermostat of capacity suitable for 1.5/2 KW 230 volt AC supply for electric storage type water heaters complete all as specified and as directed. |
|
20 |
Each |
| 69 |
1.68 |
Taking out old UNSV, burnt out sealed unit compresor by means of unscrewing foundation nut bolts, disconnecting from suction & discharge side mechanically and electrically and S & F new factory assembled hermatically sealed unit compresor for window /split type AC of capacity 1.5 TR of approved make and capacity suitable for 230 V, single phase , AC , 50 Hz electric, nuts complete including charging the system with suitable refrigerent gas as per OEM and testing complete to achieve desired cooling all as specified and directed. Make:Whirpool/Godrej/LG/kirloskar/Tecomush\nNOTE:-Quoted rate shall be deemed to include the cost of taking out old unserviceable compressor and provision of new factory assembled compressor duly charged the with refrigerent gas as per OEM. |
|
1 |
Each |
| 70 |
1.69 |
Taking out old UNSV, burnt out sealed unit compresor by means of unscrewing foundation nut bolts, disconnecting from suction & discharge side mechanically and electrically and S & F new factory assembled hermatically sealed unit compresor for window / split type AC of capacity 2.0 TR of approved make and capacity suitable for 230 V, single phase , AC , 50 Hz electric supply nuts AC complete including charging the system with suitable refrigerent gas as per OEM and testing complete to achieve desired cooling all as specified and directed.\nMake:Whirpool/Godrej/LG/kirloskar/Tecomush\nNote:-Quoted rate shall be deemed to include the cost of taking out old unserviceable compressor and provision of new factory assembled compressor duly charged the with refrigerent gas as per OEM. |
|
1 |
Each |
| 71 |
1.7 |
Taking out old UNSV, burnt out sealed unit compresor by means of unscrewing foundation nut bolts, disconnecting from suction & discharge side mechanically and electrically and S & F new factory assembled hermatically sealed unit compresor for Deep Frezer of capacity 320 to 500 ltrs of approved make and capacity suitable for 230 V, single phase , AC , 50 Hz electric supply nuts AC complete including charging the system with suitable refrigerent gas as per OEM and testing complete to achieve desired cooling all as specified and directed.Make:Whirpool/Godrej/LG/kirloskar/Tecomush\nNote:-Quoted rate shall be deemed to include the cost of taking out old unserviceable compressor and provision of new factory assembled compressor duly charged the with refrigerent gas as per OEM. |
|
1 |
Each |
| 72 |
1.71 |
Taking out old UNSV, burnt out sealed unit compresor by means of unscrewing foundation nut bolts, disconnecting from suction & discharge side mechanically and electrically and S & F new factory assembled hermatically sealed unit compresor for Water Cooler of capacity 40/80 ltrs of approved make and capacity suitable for 230 V, single phase , AC , 50 Hz electric supply nuts AC complete including charging the system with suitable refrigerent gas as per OEM and testing complete to achieve desired cooling all as specified and directed. \nMake:Whirpool/Godrej/LG/kirloskar/Tecomush\nNote:-Quoted rate shall be deemed to include the cost of taking out old unserviceable compressor and provision of new factory assembled compressor duly charged the with refrigerent gas as per OEM. |
|
1 |
Each |
| 73 |
1.72 |
Taking out old UNSV, burnt out sealed unit compresor by means of unscrewing foundation nut bolts, disconnecting from suction & discharge side mechanically and electrically and S & F new factory assembled hermatically sealed unit compresor for Water Cooler of capacity 60/120 ltrs of approved make and capacity suitable for 230 V, single phase , AC , 50 Hz electric supply nuts AC complete including charging the system with suitable refrigerent gas as per OEM and testing complete to achieve desired cooling all as specified and directed. \n Make:Whirpool/Godrej/LG/kirloskar/Tecomush\nNote:-Quoted rate shall be deemed to include the cost of taking out old unserviceable compressor and provision of new factory assembled compressor duly charged the with refrigerent gas as per OEM. |
|
1 |
Each |
| 74 |
1.73 |
Servicing of window type AC 1.5/2 TR capacity complete with chemical solution to condenser & cooling coil, cleaning of entire elements of AC, oiling/greasing to motor, painting to base tray with two coats of synthetic enamelled paint, including taking out and refixing the machine at its original location as directed including writing SM No ,with black paint. Make and accessories as per site. |
|
3 |
Each Job |
| 75 |
1.74 |
Servicing of indoor & outdoor unit of split type AC 1.5/2 TR capacity complete with chemical solution to condenser & cooling coil, cleaning of entire elements of AC, oiling/greasing to motor, painting to base tray with two coats of synthetic enamelled paint, including taking out and refixing the machine at its original location as directed including writing SM No ,with black paint. Make and accessories as per site. |
|
2 |
Each Job |
| 76 |
1.75 |
Supply and filling refrigerant gas R-22/R-12 to 1.5 TR window type AC complete all as specified and directed. |
|
1 |
Each Job |
| 77 |
1.76 |
Supply and filling refrigerant gas R-22/R-12 to 1.5/2 TR Split type AC complete all as specified and directed. |
|
2 |
Each Job |
| 78 |
1.77 |
Supply and filling refrigerant gas R-22/R-12 to Water cooler 40/80 to 60/120 ltr capacity complete all as specified and directed. |
|
1 |
Each Job |
| 79 |
1.78 |
Supply and filling refrigerant gas R-22/R-12 to Deep Freezer 320 to 500 ltr capacity complete all as specified and directed. |
|
1 |
Each Job |
| 80 |
1.79 |
Replacement of starting capacitor 60/80 MFD , 440 Volts AC complete all as specified and directed. \n(Make : EPCOS/KELTRON/SIEMENS/ SHARDA/USHA ) |
|
2 |
Each |
| 81 |
1.8 |
Replacement of starting capacitor 80/100 MFD , 440 Volts AC complete all as specified and directed. (Make : EPCOS/KELTRON/SIEMENS/SHARDA/USHA ) |
|
2 |
Each |
| 82 |
1.81 |
Replacement of Running capacitor 10 MFD , 440 Volts AC complete all as specified and directed. \n(Make : EPCOS/KELTRON/SIEMENS/SHARDA/USHA ) |
|
2 |
Each |
| 83 |
1.82 |
Replacement of Running capacitor 30 MFD , 440 Volts AC complete all as specified and directed. (Make : EPCOS/KELTRON/SIEMENS/SHARDA/USHA ) |
|
2 |
Each |
| 84 |
1.83 |
Replacement of Running capacitor 45 MFD , 440 Volts AC complete all as specified and directed. (Make : EPCOS/KELTRON/SIEMENS/SHARDA/USHA ) |
|
2 |
Each |
| 85 |
1.84 |
Replacement of thermostate with knob for Deep Freezer/water cooler of any capacity complete all as specified and directed. \n(Make : Whirlpool/Godrej/Anupurna/Indofost/Ranutrol) |
|
4 |
Each |
| 86 |
1.85 |
Replacement of fan blower motor single shaft for split AC 1.5/2. TR , single phase 230 volts AC , of any capacity complete all as specified and directed. \n (Make : Whirlpool/Godrej/Anupurna/Indofost/Ranutrol) |
|
2 |
Each |
| 87 |
1.86 |
Replacement of fan blower motor double shaft for window AC 1.5/2.0 TR , single phase 230 volts AC , of any capacity complete all as specified and directed. \n (Make : Whirlpool/Godrej/Anupurna/Indofost/Ranutrol) |
|
2 |
Each |
| 88 |
1.87 |
Replacement of fan motor for water cooler 40/80 to 60/120 ltrs capacity complete all as specified and directed. \n (Make : Whirlpool/Godrej/Anupurna/Indofost/Ranutrol) |
|
2 |
Each |
| 89 |
1.88 |
Replacement of condenser fan motor single for split AC 1.5/2.0 TR capacity complete all as specified and directed. \n (Make : Whirlpool/Godrej/Anupurna/Indofost/Ranutrol) |
|
2 |
Each |
| 90 |
1.89 |
Replacement of unserviceable remote control with Printed Circuit Boards complete suitable for existing model of Window/split AC of any capacity complete all as specified and directed. \n (Make : Whirlpool/Godrej/Anupurna/Indofost/Ranutrol) |
|
2 |
Each |
| 91 |
1.9 |
Taking down old and UNSV transformer at different locations in the area of responsibility falls under AGE(I) CIF (R ) from two pole strcture/ foundation including disconnecting the LT/HT connection and shifting to workshop and getting back after repair and refixing the same at original location and connecting electrically and commissioning complete all as specified and directed at site of following capacity transformer:- 25 to 100 KVA |
|
2 |
Each Job |
| 92 |
1.91 |
Taking down old and UNSV transformer at different locations in the area of responsibility falls under AGE(I) CIF (R ) from two pole strcture/ foundation including disconnecting the LT/HT connection and shifting to workshop and getting back after repair and refixing the same at original location and connecting electrically and commissioning complete all as specified and directed at site of following capacity transformer:- 101 to 200 KVA |
|
1 |
Each Job |
| 93 |
1.92 |
Replacement of burnt defective HT/LT copper coile of different type capcity winding with superior qulity enamelled copper winding wire/strips of approved of suitable size/guage and Nos of turns maching with the existing impendence and insulated including all allied materials such as cork sheets, fiver glass insulation/paper insulation cotton, empire tape and wooden, bolts, nuts and washer (Brass) soldering and other packing material etc required for entire winding of coils all as specified and directed by Engineer- in-Charge. |
|
100 |
Kg |
| 94 |
1.93 |
Supply and fixing in replacement HT bushing porcelain, vitreous with brass spindle, threaded with washers nuts, lock nut and rubber seal suitable for transformer of any make/type/capacity in repairs all as specified and directed by Engineer-in-Charge |
|
12 |
Each |
| 95 |
1.94 |
Supply and fixing in replacement LT bushing porcelain, vitreous with brass spindle, threaded with washers nuts, lock nut and rubber seal suitable for transformer of any make/type/capacity in repairs all as specified and directed by Engineer-in-Charge |
|
12 |
Each |
| 96 |
1.95 |
Supply and fixing in replacement Top gasket sheet made out of 2 mm thick cork sheet with suitable GI bolts, nuts, washers for top of transformer any capacity in repairs complete all as specified and directed |
|
4 |
Each |
| 97 |
1.96 |
Supply and fixing in replacement Dehydrating breather assembly CI body of standard size filled with silica-gel for transformer of capacity upto and including upto and including 200 KVA in repairs complete all as specified and directed |
|
2 |
Each |
| 98 |
1.97 |
Supply and fixing in replacement Temperature gauge circular dia type of standard size for transformer of capacity upto and including upto and including 250 KVA in repairs complete all as specified and directed |
|
2 |
Each |
| 99 |
1.98 |
Material and labour for filling in with new transformer oil for top up having low viscosity of approved make as per IS 355 of 1992 and di-electric strength 40 KV(after filtration) complete all as specified and directed by Engineer-in-Charge. Make : Savita/Castrol |
|
50 |
Ltrs |
| 100 |
1.99 |
Dehydration including filtration of transformer oil on different locations by dehydration plant including testing of samples before and after dehydration and fiteration complete all as specified and directed the dielectric strength to be achieved 40 KV at 4 mm gap after complete dehydration. |
|
400 |
Ltrs |
| 101 |
2 |
Air break gang operated triple pole mechanically operated mounted on HT insulators and galvanised steel frame with operating rod of 25mm bore medium grade GI pipe suitable for operation while standing on ground for current rating 200 Amps suitable for 11000 volt 50 Hz including 12 insulator and drop out fuse carrier element all as specified and directed by Engineer-in-charge. |
|
1 |
Each |
| 102 |
2.01 |
Expulsion fuse single pole upto 25 amps 11000 volts complete all as directed by Engr In Charge. |
|
3 |
Each |
| 103 |
2.02 |
Air break switch insulators (set of three) for 11000 volts suitable for current rating 200 amps complete all as directed by Engr In Charge. |
|
1 |
Each |
| 104 |
2.03 |
Lightening arrestor expulsion type complete with all fittings, transmission class discharge capacity 65 Kilo amps suitable for 11000 volt including taking down old uncerviceable complete all as specified and direted by Engineer-in-Charge. |
|
1 |
Per set |
| 105 |
2.04 |
Taking out submersible pump and motor of capacity 4 HP from the tube well lowered at the depth of 90 to 110 mtr from the ground level including taking out GI flanged column pipes 40mm bore of 03 metre length each (column pipe are provided with flanged joints at every 03 metre length) and one Nos submersible cable 3 core of any size incl disconnecting electrically and delivery out let pipe complete all as specified and direted by Engineer-in-Charge. |
|
1 |
Each Job |
| 106 |
2.05 |
Lowering of submersible pumping set of capacity 4 HP in the tube well up to a depth 90 to 110 metre from the ground level including lowering of GI flanged column pipes of size 40mm bore (each pipe 3M long) and 01 Nos submersible cables 3 core of any size all as directed by the Engineer-in-Charge including replacement of rubber gasket and mild steel bolts, nut and washers of suitable size for each flanged joint at every 03 metre interval for column pipe up to including connecting electrically & delivery pipe exactly as per before commissioning. |
|
1 |
Each Job |
| 107 |
2.06 |
Rewinding submersible motor 4 HP of 03 Phase, 415 volts with PVC insulated solid copper conductor (wire) superior quality of approved make, size & number of wire as per existing complete including replacement of worn out cable connections including testing and commissioning of motor after rewinding complete all as specified. \nMake of Motor : KSB |
|
1 |
Each Job |
| 108 |
3 |
Opening and reassembling of submersible motor after rewinding under item no 2.06 here-in-before & replacement of worn out spare parts as mentioned under respective items here in after. |
|
1 |
Each Job |
| 109 |
4 |
Supply only the following spare parts for submersible pump at serial No 3 here-in-before as per existing make and size :- Make of pump KSB |
|
|
|
| 110 |
4.01 |
GM Bearing Bush |
|
2 |
Each |
| 111 |
4.02 |
Rotor sleeve |
|
1 |
Each |
| 112 |
4.03 |
Water seal |
|
1 |
Each |
| 113 |
4.04 |
Thrust bearing |
|
1 |
Each |
| 114 |
4.05 |
Housing upper |
|
1 |
Each |
| 115 |
4.06 |
Housing lower |
|
1 |
Each |
| 116 |
4.07 |
Cable seal |
|
1 |
Each |
| 117 |
4.08 |
Thrust plate |
|
1 |
Each |
| 118 |
4.09 |
Coupling S/S |
|
1 |
Set of Three |
| 119 |
4.1 |
Key for coupling |
|
1 |
Each |
| 120 |
4.11 |
LNK bolt S/S |
|
4 |
Each |
| 121 |
4.12 |
Revolving disc |
|
1 |
Each |
| 122 |
4.13 |
Seal bush |
|
1 |
Each |
| 123 |
4.14 |
Sand guard |
|
1 |
Each |
| 124 |
5 |
Opening and reassembling of submersible pump of capacity 4 HP and replacement of the worn out spare parts as mentioned under respective items here in after. \nMake of pump: KSB |
|
1 |
Each |
| 125 |
6 |
Supply only the following spare parts for submersible pump at serial No 5 here-in-before as per existing make and size :- Make of pump KSB |
|
|
|
| 126 |
6.01 |
Stage bowl |
|
2 |
Each |
| 127 |
6.02 |
Impeller GM. |
|
2 |
Each |
| 128 |
6.03 |
Pump shaft S/S (single stage) |
|
1 |
Each |
| 129 |
6.04 |
Hook bolt (Upper & lower) |
|
1 |
Each Set |
| 130 |
6.05 |
GM neck ring |
|
2 |
Each |
| 131 |
6.06 |
Key for pump shaft (Each stage) |
|
2 |
Each |
| 132 |
6.07 |
Distance sleeve |
|
3 |
Each |
| 133 |
6.08 |
D.O.L Bush |
|
2 |
Each |
| 134 |
6.09 |
Sand guard |
|
1 |
Each |
| 135 |
6.1 |
Impeller key |
|
2 |
Each |
| 136 |
6.11 |
Inter ring |
|
2 |
Each |
| 137 |
6.12 |
Guide bush |
|
2 |
Each |
| 138 |
6.13 |
Suction chamber |
|
1 |
Each |
| 139 |
6.14 |
D.O.L. Sleeve |
|
2 |
Each |
| 140 |
7 |
Dismantling of existing defective induction motor of the size 20 HP capacity any make from the foundation, disconnecting the electric connection, coupling pulley, and taking out to work shop cutting down and removing existing burnt out copper windings, cleaning of slots and rewinding with super enamelled solid copper conductor ( winding wire) complete including varnishing, drying, ovening, overhauling, greasing and fixing in the same position, making necessary electric connection and testing of induction motor complete all as specified and as directed by Engineer-in-Charge. |
|
1 |
Each Job |
| 141 |
8 |
Repairing /servicing the multistage centrifugal pump set 20 HP by dismantling the pump from induction motor, opening for inspection, replacing the worn out parts like pump shaft, impellers, gland bush, bearings gland bolts and nuts,gland packing, gasket, water seal etc including repaires to pump shaft by remetaling, grinding, polishing and reassembling the same and replasing the rusted nuts, bolts washers etc and testing complete all as specified and directed by Engr In Charge. |
|
1 |
Each Job |
| 142 |
9 |
Replacing the bearing No 73072 non driven and suitable for multistage centrifugal pump all as specified and as directed by Engr-in-Charge. \nMake -Tata / SKF |
|
2 |
Each |
| 143 |
10 |
Excavation in trenches not exc. 1.5m wide and not exc. 1.5m deep in soft/loose soil for laying of underground cable, foundation of poles & stays etc., and getting out, complete all as specified and as directed. |
|
45 |
Cum |
| 144 |
11 |
Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm, complete all as specified. |
|
24 |
Cum |
| 145 |
12 |
Removing excavated material (soils) to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified. |
|
21 |
Cum |
| 146 |
13 |
Sand cushioning to underground cables complete all as specified in clause 19.75 of SSR Part-I laid before and after laying of cable, complete all as specified. |
|
17 |
Cum |
| 147 |
14 |
Sub class ‘B brick, old size, brick covering laid dry, flat, transversally along the length of cable on sand cushioning, with width equal to the length of the brick, complete all as specified and directed. |
|
2500 |
Each |
| 148 |
15 |
Supply and pouring KOEL care super genuine oil 20 liters Can Cat part No - 82.050.10.0.20 |
|
9 |
Each |
| 149 |
16 |
Supply and fixing in replacement 1.1 liter fuel filter kit cat part No - 48.040.01.0.00 |
|
20 |
Each |
| 150 |
17 |
Supply and fixing in replacement Lub oil filter element cat part No - 06.040.01.0.00 |
|
15 |
Each |
| 151 |
18 |
Supply and fixing in replacement air filter element cat part No - CC1.006.008.0.00 |
|
6 |
Each |
| 152 |
19 |
M&L cable jointing kit for 11 KV (earthed) grade cable for outdoor termination heat shrink type joint compelete with jointing material and accessories suitable for 3 core XLPE armoured conductor cable of size 95 Sqmm,complete all as specified. |
|
2 |
Each |
| 153 |
20 |
PART-II (Schedule of Credit)\nAmount of credit of Rs. 44128.00 for retrieved material mentioned in Sch `A' Part-IIof tender documents in PDF form which will be deducted offline during acceptance of tender. |
|
|
|
