| 1 | 1 | Taking down of existing High bay light fittings of any type complete from ceiling all as specified and as directed by Engineer-in-Charge. | | 135 | EACH |
|---|
| 2 | 2 | Supply and fix integral LED high bay light fitting not less than 210 Watts of lumen output capacity with minium system effecieny >110/lumens / watt of colour temperature 5700K, IP 65, heat proof silicon rubber ring high pressure die cast aluminium high transmitance tempared glass cover, including driver and control accessories complete set with operating voltage between 140V-270V AC P.F > 95 with T&P and fitting accessories including 3 core copper cable of size 2.5 Sq mm connection complete including 3 meters suspension chain (heavy duty, capable of catering load of ibid fitting) all as specified and as directed by Eng-in-Charge.\nMake : PHILIPS (BY416PLED240SCWSK60FGGRNIS5) or CG Cat Part No.LHB-250-CDL/60-M or HAVELLS or Luker \nNOTE :- (i) The rate is deemed with including fitting arrangement as per site requirement complete.\n(ii) National accreditation Board for testing and calibration laboratories (NABL) certificate from govt of India w.r.t system effeciency to be higher than 110 lumens/watts and overall wattage of fittings is mandatorily required, to be submitted before claiming the RAR payment. | | 135 | EACH |
|---|
| 3 | 3 | Supply and fix 16 Amps switch socket combination flush type on independent board all as specified and as directed by Eng-in-Charge.\nMake: Anchor /Conal / legrand | | 3 | EACH |
|---|
| 4 | 4 | Supply and fix PVC rectangular block for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover of size of 175 x 100 x 50 mm including accessories all as specified and as directed by Eng-in-Charge. | | 3 | EACH |
|---|
| 5 | 5 | Material and labour for submain wiring with 2 runs of 4.0 sqmm multi / stranded copper conductor cable (FRLS) PVC insulated 1100 Volts grade and one run of 2.5 sqmm PVC insulated multistranded copper conductor cable (FRLS) earth continuly conductor including lugs of sutiable size drawn in and including rigid PVC casting & caping of suitable size but not less than 25mm width complete all as directed.\nNOTE : Two runs of 4.0 Sqmm and one run of 2.5 Sqmm cable alongwith PVC casing & caping will be measured as one unit. | | 65 | RM |
|---|
| 6 | 6 | Supply, installation, testing and commissioning of water cooler with inbuilt Aquaguard UV purification with fully stainless steel body working on single phase 240 volts. 50 Hz AC supply complete with compressor fan motor, evaporating coil, thermostatic temperature control etc suitable to operating capacity with ozone frindly refrigerant gas with storage capacity 120 ltrs and outlet filter capacity 80 LPH normal cooling capacity of 80 Ltrs/hour all as directed by Engineer-in-Charge.\nMake : Blue star( Model : SWCNST 80120UV ) or equivalent model in Voltas / Usha | | 3 | EACH |
|---|
| 7 | 7 | Supply, installation, testing and commissioning of additional 20\" size transparent Italian made (Eureka Forbes) transparent raindance housing complete with 5 micron PP sediment filter all as directed by Engineer-in-Charge.\nMake : Atlas Filtri / Voltas / Blue Star / Usha / Eureka Forbes. | | 3 | EACH |
|---|
| 8 | 8 | Supply and installation of voltage stablizer 4 KVA suitable for wall mounting (Automatic operation) single phase naturally cooled suitable for input voltage 166 to 295 volts stabilized output voltage 200 to 240 volts with time delay of 2 to 4 minutes suitable for water cooler. \nMake : V Guard / Premier. | | 3 | EACH |
|---|
| 9 | 9 | Supply and fix GI tubes 20 mm bore medium grade galvanized, with all fittings and fixtures complete to wall and ceilings or laid in floors all as speicified and as directed by Eng-in-Charge. | | 80 | RM |
|---|
| 10 | 10 | Supply and fix stop valves, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 20mm bore iron pipe or for unions and fixed. | | 3 | EACH |
|---|
| 11 | 11 | Supply and fix PVC connections for 20mm bore with PTMT nuts of length 450mm | | 10 | EACH |
|---|
| 12 | 12 | Material and labour for providing cement concrete type D2 (using 40mm graded stone aggregate), 1:4:8 as in foundation, filling and mass concrete all as specified and as directed by Engineer-in-Charge. | | 1 | Cum |
|---|
| 13 | 13 | Material and labour for providing cement concrete type B1, 1:2:4 using 20mm graded aggregate as in lintels up to 1.5m clear span, cills steps seismic and other similar bands, plinth courses, coping bed plates etc complete including necessary form work all as specified and as directed by Engineer-in-Charge. | | 1 | Cum |
|---|
| 14 | 14 | Supply and fix High density polyethylene (HDPE) pipes of pressure rating 6kgf /Sq cm, 40mm bore with all fittings and fixtures complete to walls and cellings or laid in floors all as specified and as directed by Engineer - in-Charge | | 40 | RM |
|---|
| 15 | 15 | Supply and fixing sheet metal enclosure for MCB DB SPN 2 way, AC, 240 Volts complete all as specified and directed. | | 3 | EACH |
|---|
| 16 | 16 | Supply & fxing MCB SPN 32 Amps, AC, 240 Volts complete all as specified and directed. | | 3 | EACH |
|---|
