Repair / Polishing And Painting Of Furniture Items Of Otm Accn At Panagarh Under Ge Panagarh, PANAGARH-West Bengal

Repair / Polishing And Painting Of Furniture Items Of Otm Accn At Panagarh Under Ge Panagarh - 1 Locker Steel ( Fd-1029 ) Nremoving Of Old Unserviceable Following Parts Of Locker Steel And Supply & Fixing New Parts Of The Followings : 2 ( A ) Leg Made Of 18 Gauge Pbi Sheet 3 ( B ) Door Hinges 4 ( C ) Replacement Of U / S Handle ( Cp ) 5 ( D ) M S Hasp And Stapple 6 ( E ) Replacement Of U / S Shutter For Door 7 ( F ) Replacement Of U / S 19Mm Dia Aluminium Conduit Pipe With Socket 8 ( G ) Painting, Removal Of Existing Worn-Out Paint From Inside And Out Side Of Frames And Preparation Of Surface Complete Frame For Locker Steel And Applying 2 Coats Of Synthetic Enamel Paint By Using Gun Spray Machine ( Silver Grey / Og ) For Smooth & Glossy Finish Complete All As Specified And As Directed. 9 Chair Cb Steel With Arm [ Fd-75 ( M ) ] Ntaking Out Old Unserviceable Seat & Back Of Chair Cb Steel With Arm And Supply And Fixing New Seat Frame, Well Seasoned 1St Class Teak Wood Free From Crack, Knot And Hole Including Godrej Pattern Canned With Oval Shape 2Mm Thick Plastic White Cane And 4Mm Flat White Cane For Border Including French Polish On Prepared Surface Until Required Shining Shade And Colour Shall Be Approved By Engr In Charge And Rest All As Per Drawing. 10 ( A ) Seat Frame 11 ( B ) Back Frame 12 ( C ) S & F Pvc Shoe Fixed With Ms Screw. 13 ( D ) S & F New Handle Of Chair Cb Steel With Arm. 14 ( E ) Ms Cleat For Seat And Back And Broken Frame Of Chair Duly Welded Over Frame Made Of Ms Flat Iorn ( 45Mm Long ) 25X6mm And Painting With Synthetic Enemel Paint To Match With Existing Surface Complete All As Specified And As Directed. 15 ( G ) Painting, Removal Of Existing Worn-Out Paint From Inside And Out Side Of Frames And Preparation Of Surface Complete Frame For Chair Cb Steel With Arm Furniture And Applying Spraying 2 Coats Of Synthetic Enamel Paint, Silver Grey / O G By Spray Gun For Smooth & Glossy Finishcomplete All As Specified And As Directed. 16 Tv Trolly ( Tp ) 17 Removing Of Existing Unsv / Broken Openable Glass Shutter Of Tv Trolly And S&F New Glass Shutter Of 5.5 Mm Thickness In Existing Shape And Making Functional Complete All As Specified And As Directed. 18 Removing Of Existing Unsv Pull Out Tray Of Tv Trolly And S&F New Pull Out Tray Made Of 18 Mm Thick, Pre Laminated Particle Board Exterior Grade Of Existing Shape & Size And Making Functional. Pull Out Tray Shall Be Fixed On Telescopic Channel Complete All As Specified And As Directed. 19 Removing Of Unsv Existing Castors Of Tv Trolly And S&F New Castors Swyel Type, 50 Mm Thick And Making Functional Complete All As Specified And As Directed. 20 Removing Of Existing Unsv Back Ply Of Tv Trolly And S&F New Ply 6Mm Thick Commercial In Existing Shape & Size & Making Functional Complete All As Specified And As Directed. 21 Chair Computer ( Fd / Map-Ii / 01 ) 22 ( A ) S&F In Repair Back Frame With Dimensions As Shown On Drngs. Back Shall Be Of 18 / 19Mm Thick Hot Presed Ply Wood Upholstered With Fabric And Moulded Polyurethane Foam. The Back Frame Shall Be Designed With Contour Lumber Supports For Extra Conform With Pvc Lapping All Arounds Complete All As Specified And Directed. 23 ( B ) S&F In Repair Seat Frame Of Size 510X470x60. Seat Shall Be Of 18 / 19Mm Thick Hot Presed Ply Wood Upholstered With Fabric And Moulded Polyurethane Foam Complete All As Specified And Directed. 24 ( C ) S&F In Repair Hand Rest With Black Intergral Skin Polyurethane Reinforced With Ms Insert. It Shall Be Scratch And Weather Resistant Complete All As Specified And Directed. 25 ( D ) S&F In Repair Pedestal Assy Injection Moulded In Black 30% Glass Filled Nylon. A 10.5Mm Dia Forged Bright Sinc Plated Ms Castor Pin Is Of Press Fitted Into Each Prong For Holding The Castor. It Is 600Mm Pitch Centre Dia Complete All As Specified And Directed. 26 Hat Stand With Mirror ( Fd-233 ) Nremoval Of Following Unserviceable / Broken Wooden Components Of Hat Stand W / O Damaging Other Parts And S&F New Components Of Well Seasoned Teak Wood As Per Drawing And As Directed By Engr-In-Charge. 27 ( A ) Top And Bottom Rail Of Size 20X50mm ( 1000Mm Long ) First Class Teak Wood 28 ( B ) Side Rail Of Size 20X50mm ( 710Mm Long ) Of First Class Teak Wood 29 ( C ) Replacement Of Unserviceable Back Side Plywood Of Size 1000Mmx710mm, 4Mm Thick Commercial Plywood Isi Marked 30 ( D ) Replacement Of Unserviceable Mirror Of Size 300Mmx440mm, 5 To 5.5Mm Thick And Fixed With First Class Teak Wood Beading 10Mmx12mm In Section Teak Wood. 31 ( E ) Removal Of Existing Worn Out / Unserviceable Peg Set And Supply And Fixing Of New Peg Set Of Size 150Mm Long Brass To Be Fixed With Brass Screw. 32 ( F ) Replacement Of Unserviceable Front Side Teak Plywood Of 1000Mmx710mm, 4Mm Thick Isi Marked. 33 ( G ) Polishing Of Wooden Portion To Hat Stand With Mirror With Two Coats Of French Polish After Necessary Preparation Of Existing Surface All As Directed By Engr-In-Charge. 34 Table Office Clerk Steel ( Fd-84 & 1004 ) 35 ( A ) Removing Old Broken Damaged Top Of Table Office Clerk Steel And S / F New Top Made Out Of 18 / 19Mm Thick Prelaminated Particle Board One Side Teak Veneered With 19X4mm Teak Wood Beading Duly French Polished All Around The Top Complete All As Specified And As Directed. 36 ( B ) Removing Old U / S Internal Cupboard / Drawer Locks From Table Office Clerk Steel And S / F New Internal Locks 40Mm 4 Lever With Duplicate Keys Of Approved Quality Complete All As Specified And As Directed. ( Make Of Lock -Lico / Linc / Sunbeam ) . 37 ( C ) Removing Of Old Existing U / S Table Drawer And S&F New Drawers Of Existing Shape And Size Made Of 12Mm Thick Seasoned Teak Wood Duly French Polished Complete All As Specified And As Directed. 38 ( D ) Removing Of Door Shutter Of Table Office Offr And S&F New Door Shutter Of Existing Shape And Size Made Of 18 / 19Mm Thick Prelaminated Particle Board Exterior Grade Supported With French Polished Teak Wood Edging Alaround Complete All As Specified And As Directed. 39 ( E ) Removing Old Broken U / S Rubber Shoes Of Table Office Clerk Steel And S / F New Hard Rubber Shoes Of Approved Quality & Tightly Fitted At The Bottom Of Legs Of Table Office Clerk Steel Complete All As Specified And As Directed. 40 ( F ) Spray Painting To Table Office Clerk Steel Internally And Externally With Synthetic Enamel Paint Olive Green Two Or More Coats Duly Scrapping, Derusting Old Dirt Stains Complete All As Specified And As Directed. 41 Chair Wooden Bottom W / O Arm ( Fd-256 ) Nrepair / Replacement Of Following Defective Wooden Components Chair Wooden Bottom W / O Arm W / O Damaging Other Parts And S&F New Components Of Well Seasoned Teak Wood As Per Drawing. The Wooden Surface Is Prepared By Scrapping With Sand Paper And Making The Surface Smooth And Applying Two Coats Of French Polish So As To Match With Existing Surface Complete All As Specified & Directed. 42 ( A ) Front Leg Of Size 30Mmx55mmx455mm 43 ( B ) Rear Leg Of Size 30Mmx55mmx840mm 44 ( C ) Side Rail Of Size 30Mmx65mmx320mm 45 ( D ) Front Rail Of Size 30Mmx65mmx370mm 46 ( E ) Rear Rail Of Size 30Mmx65mmx340mm 47 ( F ) Back Rest Of Size 50Mmx15mmx340mm 48 ( G ) Seat ( Made Out Of 6Mm Commercial Bwr Plywood Is-303 ) 49 ( H ) Stiffner Of Size 20Mmx25mmx380mm 50 ( J ) Side Stiffner Of Size 20Mmx25mmx320mm 51 ( K ) Material & Labour For Two Coats Of French Polishing On All Visual Surfaces ( Internal & External As Shown On Drg ) Of Chair Wooden Bottom W / O Arm Including Cleaning And Preparing The Surface Of The Articles Of Wooden Furniture As Specified And Direct By Engr-In-Charge. 52 Chair School With Hand Board ( Fd / E6 / Map / 05 ) Nremoval Of Following Unserviceable / Broken Components Chair School With Hand Board W / O Damaging Other Parts And S&F New Components Of The Following As Per Drawing. 53 ( A ) S & F One Piece Pvc Back And Seat As Per Drg. 54 ( B ) S & F 18Mm Pre Laminated Particle Board Top Openable With Pvc Edging Screwed 25Mm Hole Steel Pipe Inserted In 20Mm Ms Rod Welded To Frame As Per Drg. 55 ( C ) S & F New Busket Below The Seat Shall Be Made Of 7 Nos, 5Mm Dia Mild Steel Rod Made To Shape As Shown On Drg. 56 ( D ) Painting, Removal Of Existing Worn-Out Paint Of Frames And Preparation Of Surface Complete Frame Of Chair School With Hand Board And Applying Spraying 2 Coats Of Synthetic Enamel Paint, Black Paint By Spray Gun For Smooth & Glossy Finish. 57 Table Computer ( Tp ) 58 Removing Of Existing Unsv Top Of Table Computer And Supply And Fixing New Top Of 18 Mm Thick Pre-Laminated Particle Board Exterior Grade Of Size 561 X 900 Mm And Making Functional Complete All As Specified And As Directed. 59 Removing Of Existing Unsv Pull Out Tray From Table Computer And S&F New Tray Made Of 18 Mm Thick Pre-Laminated Particle Board Exterior Grade Of Existing Shape & Size. Tray Shall Be Fixed On Telescopic Channel Complete All As Specified And As Directed. 60 Removing Of Existing Unsv Drawer Of Table Computer And S&F New Drawer Of Existing Shape & Size, Made Of 18 Mm Thick Pre-Laminated Particle Board Exterior Grade. Drawer Shall Be Fixed On Telescopic Channel Complete All As Specified And As Directed. 61 Removing Of Existing Unsv Key Board Tray Of Table Computer And S&F New Key Board Of Existing Shape & Size, Made Of 18 Mm Thick Pre-Laminated Particle Board Exterior Grade. Tray Shall Be Fixed On Telescopic Channel Complete All As Specified And As Directed. 62 Removing Of Unsv Nylon Buffers Of Table Computer And S&F Of New Nylon Buffers Of Table Computer And Making Functional Complete All As Specified And As Directed. 63 Table Office Officer Steel ( Fd-1003 ) 64 ( A ) Removing Old Broken Damaged Top Of Table Office Officer Steel And S / F New Top Made Out Of 18 / 19Mm Thick Prelaminated Particle Board One Side Teak Veneered With Standard Pvc Edging All Around The Top Complete All As Specified And As Directed. 65 ( B ) Removing Of Old Existing U / S Table Drawer And S&F New Drawers Of Existing Shape And Size Made Of 12Mm Thick Seasoned Teak Wood Duly French Polished Complete All As Specified And As Directed. 66 ( C ) Removing Of Door Shutter Of Table Office Offr And S&F New Door Shutter Of Existing Shape And Size Made Of 18 / 19Mm Thick Prelaminated Particle Board Exterior Grade Supported With French Polished Teak Wood Edging All Around Complete All As Specified And As Directed. 67 ( D ) Removing Old U / S Internal Drawer Locks From Table Office Officer Steel And S / F New Internal Drawer Locks 40Mm 4 Lever With Duplicate Keys Of Approved Quality Complete All As Specified And As Directed. 68 ( E ) Removing Old Broken U / S Hard Rubber Shoes Of Table Office Officer Steel And S / F New Hard Rubber Shoes Of Approved Quality & Tightly Fitted At The Bottom Of Legs Of Table Office Officer Steel Complete All As Specified And Shown On Drawing. 69 ( F ) All As Per Item No 1.07 But For Table Office Officer Steel. 70 Chair Cba Office ( Db-3954 ) N ( A ) Remove Of Existing Unserviceable Under Mentioned Members And Providing The New One Made Out Of 1St Class Hw Well Seasoned ( Teak ) And Fixing The Same In Its Original Position As Per Drg. 71 ( I ) Front Leg 72 ( Ii ) Rear Leg 73 ( Iii ) Side Rail ( Hole Should Be 12.5Mm Apart From Each Other ) 74 ( Iv ) Front Rail ( Hole Should Be 12.5Mm Apart From Each Other ) 75 ( V ) Back Rail ( Hole Should Be 12.5Mm Apart From Each Other ) 76 ( Vi ) Back Rest Batten Horizontal 77 ( Vii ) Long Stiffener ( Lower ) 78 ( Viii ) Short Stiffener ( Lower ) 79 ( B ) Removing The All Worn Out Plastic Cane From Chair Cba And Providing And Recanning Of The Same With New White Plastic Cane 2Mm Thick Half Round Oval Shape Make-Premier As Approved By Engr-In-Charge / Ge For General Weaving And 4Mm Thick Cane Plastic For Beading Work All Around As Shown In Drg ( Plastic Case Type -I Hdpe ) Complete All As Specified And As Directed. 80 ( C ) Preparation Of Surface By Remove Of Existing Polishing Mark Scratches From All Exposed Wooden Surface To Make Clean And Smooth With Required Grade Of Sand Paper And Finish With Polish To Bring The Surface To Require Glossy Finish And As Directed By Engr-In-Charge. . 81 Table Dining Ors [ Fd-165 ( M ) ] Nremoving Following Old Worn Out Unsv Parts Of Table Dining Ors Without Damaging Any Other Parts And S&F Of New Parts Of Appropriate Size And Shape All As Per Drawing And As Directed. 82 ( A ) Legs ( 741Mm ) 83 ( B ) Leg Upto Bottom Stiffener 84 ( C ) Foot Rest ( 1575Mm ) 85 ( D ) Long Side Rail 86 ( E ) Bottom / Top Stiffener ( 490Mm ) 87 ( F ) Rubber Shoe Hard 88 ( G ) Removing Of Old Wornout Unserviceable Top Of Table Dining Ors And S&F New Top Made Out Of 18Mm Thick Commercial Bwr Gde Ply Wood With 1 Mm Thick Plastic Laminated Sheet To Be Pasted On Top & 4 Mm Thick Teak Wood Edging All Round Complete All As Specified And As Directed. 89 ( H ) Preparation Of Surface Of The Frame Of Table Dining Ors By Scrapping And Painting With Two Coats Of Black Synthetic Enamel Paint Complete All As Specified And As Directed. 90 Table Dressing Ladies ( Fd-251 ) 91 ( A ) Remove Unserviceable Legs And Providing The Legs Of Size 150X45x45mm Made Out Of Well Seasoned Teak Wood And Fixing The Same In Its Original Position As Per Drg Complete All As Specified And As Directed. 92 ( B ) Remove Unserviceable Stiffener And Providing The New One Of Size 235X40x25mm Made Out Of 1St Class Well Seasoned Teak Wood And Fixing The Same In Its Original Position As Per Drg Complete All As Specified And As Directed. 93 ( C ) All As Per Item No 13.02 ( B ) Here-In-Before But Of Size 650X40x25mm Complete All As Specified And As Directed. 94 ( D ) Remove Unserviceable Top And Providing / Fixing The New One Made Out Of 18Mm Thick Pre-Laminated Particle Board Of Size 900X380mm With 4Mm Thick Teak Wood Beading On Front Side And Fixing The Same In Its Original Position Complete All As Specified And As Directed. 95 ( E ) Remove Unserviceable Side And Providing The New One Made Out Of 18Mm Thick Pre-Laminated Particle Board One Side Teak Face And Fixing The Same In Its Original Position Complete All As Specified And As Directed. 96 ( F ) Remove Side Of Drawer And Providing The New One Of Size 330X115mm Made Out Of 12Mm Thick Well Seasoned 1St Class Hw ( Teak ) And Fixing The Same In Its Original Position Complete All As Specified And As Directed. 97 ( G ) All As Per Item No 13.06 ( F ) Here-In-Before But Back Of Drawer Of Size 315X115x12mm As Per Drg Complete All As Specified And As Directed. 98 ( H ) Remove The Unserviceable Ply Wood From The Drawer And Providing / Fixing The Same With New One 6Mm Ply Wood Of Size 315X330mm Complete All As Specified And As Directed. 99 ( J ) Remove The Knob And Providing The New One Chromium Plated 40Mm As Approved / Directed By Garrison Engineer And Fixing The Same In Its Original Position. 100 ( K ) Remove Broken Sliding Glass And Providing New One Of Size 300X290x6mm As Approved By Garrison Engineer And Fixing The Same In Its Original Position. 101 ( L ) Remove The Unserviceable Aluminum Channel Double And Fixing The Same As Per Drg. 102 ( M ) Remove Unserviceable Mirror Frame From Its Original Position And Providing The New Frame Made Out Of Teak Wood Well Seasoned Size 3130X19x25mm And Fixing The Same In Its Original Position As Per Drg. 103 ( N ) Remove The Unserviceable Broken Mirror And Providing The New One Of Size 1220X365x5.5Mm Thick Make-Golden Fish / Swastik Or As Approved By Ge / Engineer-In-Charge And Fixing The Same In Its Original Position. 104 ( O ) Remove The Ply Wood From The Back Of The Mirror And Providing The New One Made Out Of 6Mm Green Ply Bwr Commercial And Fixing The Same In Its Original Position As Per Drg. 105 ( P ) M & L For Preparation Of Surfaces Of Table Dressing Ladies By Clean And Smooth With Required Grade Of Sand Paper. After Removing Existing Polish Marks Apply Specified Polish To Bring Surfaces To Glossy Finish As Directed By Engr-In-Charge. ( Make Of Polish-Cat / Shenlac ) . 106 Trestle Store Room Wooden [ Fd-86 ( M ) ] Nrepairs To The Following Parts Of Wooden Trestle By New Parts Of Appropriate Size And Shape With Timber Sal As Directed By Engr-In-Charge & Specified. 107 ( A ) S&F 2Nd Class Hard Wood Legs Of Size 405X100x100mm 108 ( B ) S&F 2Nd Class Hard Wood Top Batten ( Middle Of Size 2400X60x100mm ) 109 ( C ) S&F 2Nd Class Hard Wood Batten ( Side ) Of Size 2440X100x100mm 110 ( D ) S&F 2Nd Class Hard Wood Batten ( Short ) Of Size 600X100x60mm 111 ( E ) Repair To Loose Wooden Trestle, Providing Clamp Piece Of Size 300Mm X 40 Mm X 5Mm `L` Shape With 6 Nos Screw Including Painting With Black Paint. 112 ( F ) Preparation Of Surface Of Wooden Trestle Of Any Description And Treated With Two Coats Of Creosote Oil All As Specified. 113 Table 900 X 600 X 760 Mm Steel ( Fd-1007 ) 114 ( A ) Removing Old Broken Damaged Top Of Table 900 X 600 X760 Mm Steel And S / F New Top Made Out Of 18 / 19Mm Thick Prelaminated Particle Board One Side Teak Veneered Phenol Formal Dehyde Exterior Grade With 19X4mm Teakwood Beading Fixed With Headless Nails All Around The Top Complete All As Specified And As Directed. 115 ( B ) Removing The Existing Steel Long Rail From Table 900X 600 X 760 Mm And S & F New Steel Long Rail Of Size : 25Mm X 25Mm X 1.6Mm Thick. All As Shown On Drg And Directed By Engineer-In-Charge. 116 ( C ) Remove The Existing Ms Legs From Table 900 X 600 X760 Mm And S & F New Leg Made Out Of 25Mm X 25Mm X Ms Tube 1.6Mm Wall Thickness. All As Directed By Engineer-In-Charge And As Shown On Drg. 117 ( D ) Remove The Existing Stiffner Bottom And S & F New Stiffner Bottom Made Out Of 25Mm X 25Mm, Ms Tube Of 1.6Mm Wall Thickness. All As Directed By Engineer-In-Charge And Shown On Drg. 118 ( E ) Remove The Existing Short Stiffner And S & F New Short Stiffner Made Out Of 25Mm X 25Mm, Ms Tube Of 1.6Mm Wall Thickness. All As Directed By Engineer-In-Charge And Shown On Drg. 119 ( F ) Remove The Existing Unserviceable Shoes From Table 900 X 600 X760 Mm And And S & F New Pvc Shoes Suitable For 25X2mm Ms Tube. All As Directed By Engineer-In-Charge And Shown On Drg. 120 ( G ) Painting ( Remove The Existing Worn Out Paint From Table 900 X 600 X760 Mm And Applying One Coat Of Synthetic Enamell Paint Black Over A Coat Of Primer. All As Directed By Engineer-In-Charge And Shown On Drg. 121 Chair Cb Steel Without Arm [ Fd-75 ( M ) ] 122 ( A ) Removing The Worn Out Paint By Scraping From The Steel Surface, Necessary Preparation Of Surface For Painting And Welding Wherever Required, Two Coat Of Spray Painting With Synthetic Enamelled Paint Olive Green Over A Coat Of Metal Primer After Dent / Bent Portion. Wooden Surface Should Be Black Polish To Required Glazed And Shine Complete All As Specified And As Directed. 123 ( B ) Removing The Worn Out U / S Seat Frame And Providing / Fixing The New One Of Existing Size Made Out Of 1St Class Teak Wood Duly Recanning With New Plastic Cane 2Mm Thick Oval Shape For General Weaving And 4Mm Thick Plastic Cane For Beading All Around As Show In Drg. Wooden Frame Should Be Finished With Black Polish And Fix In Its Original Position With Required Screw ( Plastic Cane Type-I Hdpe ) Complete All As Specified And As Directed. 124 ( C ) All As Per Item 16.02 ( B ) Here-In-Before But Back Frame. 125 Rack Shoe Steel ( Fd / E6 / Map / 02R ) Nremoving Of Old Unsv Fillowing Parts Of Rack Shoe Steel & Fixing New Parts Of Following : 126 ( A ) Replacement Of 3Mm Dia Cr Rod Of Length 300Mm 127 ( B ) Replacement Of Worn Out / Ocusted 25Mm Dia Cr Pipe By Welding With New Parts 128 ( C ) 3Mm Dia Cr Rod Of Length 700Mm 129 ( D ) S&F Pvc Shoe Fixed With Ms Screw 130 ( E ) All As Per Item No. 17.04 ( D ) But Rack Shoe Steel 131 Schedule Of Credit

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	15-Feb-2020	DATE CORR	Date	24-02-2020

INR 500 /-

INR 69920.0 /-

INR 34.96 Lakhs /-