Tender For Civil Works - Roads Work -L058-L034 To Bharaul ( Vr58 )
Tender Value
58.65 Lakhs
Estimated cost
Bid Submission
28 Jan 2020
0 days left
EMD
1.17 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
TEGHRA → Bihar
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
tender for Civil Works - Roads work -L058-L034 To Bharaul ( Vr58 )
BOQ
| Name of Work: L034 To Bharual | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Setting Out Pillars -Providing & Fixing of Working benchmark Pillars 01 nos. per km & 04 Nos. of reference pillars required for 1 Km. as per drawings given and direction of E/I\nWorking benchmark Pillars | 5 | Nos | |
| 2 | 2 | Clearing and Grubbing Road Land (By manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification-clause 201.1 and direction of E/I | 0.65 | Ha | |
| 3 | 3 | Construction of embankment with approved material deposited from road way cutting and excavation from drain and foundation of other structures and excavated with an average lead of 100 m graded and compacted to meet requirement of tables 300.1 and 300.2 as per technical specification clause 301.5 | 114.94 | Cum | |
| 4 | 4 | Excavation in Soil using Hydraulic Excavator and Tippers with disposal upto 1000 m-Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per Technical Specification Clause 302.3 (Including Royality & Labour Cess). | 191.57 | Cum | |
| 5 | 5 | Construction of Embankment with material obtained from borrow pits with a lift upto 1.5 m, transporting to the site spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m & 100 m as per Technical Specification Clause 301.5 . (Including Royality & Labour Cess).\nFor 1000 m lead | 664.49 | Cum | |
| 6 | 6 | For 100 m lead | 996.74 | Cum | |
| 7 | 7 | Granular Sub-Base with Coarse Graded Material (Table:- 400- 2)-For Grading I Material -Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. | 315.18 | Cum | |
| 8 | 8 | WBM Grading 3 (By Manual Means) -Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. | 286.88 | Cum | |
| 9 | 9 | Prime Coat (Low porosity)-Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per Technical Specification Clause 502. | 1530 | Sqm | |
| 10 | 10 | Tack Coat -Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with Primer and clened with hydriloc broom as per technical specification aclouse 503. | 1530 | Sqm | |
| 11 | 11 | MSS-MIX SEAL SURFACE (TYPE-B) BITUMINOUS (S-90)-Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 | 1530 | Sqm | |
| 12 | 12 | Panel Concrete Pavement -Construction of Panel Concrete , Plain Cement Concrete Pavement Thickness as per design,over a prepared sub base , with 43 grade cement or any other type as per Caluse 1501.2.2 M 30 (Grade) Course and fine aggregates conforming to IS:383 , Maximum size of Course aggregate not esceeding 25 mm , mixed in a concrete mixer of not less than 0.2 cum capacity and approprite weigh batcher using approved mix design , laid in approved fixed side formwork (steel channel,laying and fixing of 125 micron thick polythene film,wedges,steel plates including leveling the formwork as per drawing ) spreading the concrete with shovels,rakes,compacted using needle,screed and plate vibrators and finished in continous operation including provision of contraction and expansion ,constrution joints,applying debonding strips,primer , sealant,dowel bars,near approches to bridge/culvert and construction joints,admixture as approved,curing of concrete slabs for 14 days ,Curing compound (where specified) and water finishing to lines and grade as per drawing and technical Specification Clause 1501. PCC Grade M-30 Each Panal (0.50 x 0.50 ) Thickness 100 mm . | 229.5 | Cum | |
| 13 | 13 | Kilometre stone -Reinforced cement concrete M15 grade kilometre local stone of standard design asper IRC:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703.\nii) Km stone | 2 | No. | |
| 14 | 14 | iii) 200 m stone | 4 | No. | |
| 15 | 15 | Traffic sign-Providing and fixing of Retro reflective cautionary , mandatory and informatory sign board as per IRC :67 made of 1.5 mm thick MS steel duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per clause 1701.3.9 of MORD for rural road of required shade and colour supported and welded on 47mmx47mmx12swg sheet tube firmly fixed to the ground by mean of properly designed foundation with M15 grade cement concrete 450x450x600 mm ,600mm below ground level as per approved drawing clause 1701.2.2. \n600 mm equilateral & triangle, (Left/Right Curve)\n | 2 | Nos | |
| 16 | 16 | 600 mm circular, (Speed Limit) | 2 | Nos | |
| 17 | 17 | 900 mm equilateral & triangle,\n (Left, Right Curve) | 2 | Nos | |
| 18 | 18 | 800 mm x 600 mm rectangular, OR | 2 | Nos | |
| 19 | 19 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface-Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. | 80 | Sqm | |
| 20 | 20 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on concrete Surface-Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.-Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 sqm. | 120 | Sqm | |
| 21 | 21 | (I)Providing and Fixing 'Logo' of Project -Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1\nDirection Board\n | 2 | No. | |
| 22 | 22 | (I)Providing and Fixing 'Logo' of Project -Providing and fixing of typical MMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1\n | 4 | No. | |
| 23 | 23 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of side and bottom and backfilling in trenches with | 64.05 | cum | |
| 24 | 24 | Type B (First Class ) Bedding Laying (First Class) bedding on well compacted sand, moorum or approved granular material as per Clause 1105 (ii) | 7.26 | cum | |
| 25 | 25 | Providing concrete for plain / reinforced concrete in open foundation complete as per drawings and techinical specifications clause 802, 803, 1202, & 1203. | 5.42 | cum | |
| 26 | 26 | Brick masonry work in cement mortar in substructure complete expecting pointing and plastering as per drawing and technical specifications Clauses 602, 603, 604, 1202 & 1203 | 61.3 | cum | |
| 27 | 27 | Providing and laying reinforced cemnt concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation. Protection works, backfillilng concrete and masanry works in head walls and parapets clause 1106.\n1000 mm Pipe | 15 | m | |
| 28 | 28 | Providing 1.5 mm cement punning including curing carriage of water with all leads and lifts as per building specification and direction of E/I | 28.44 | sqm | |
| 29 | 29 | Plastering with cement mortar ( 1:4) on brick work in sub- structure as per Technical Specifications | 133.7 | sqm | |
| 30 | 30 | Construction Cost - | |||
| 31 | 31 | Labour Cess (1%) | 1 | RS | |
| 32 | 32 | GST (12%) | 1 | RS | |
| 33 | 33 | Total Construction Cost (A) - | |||
| 34 | 34 | 2nd Year Maintenance cost | 1 | Year | |
| 35 | 35 | 3rd Year Maintenance cost | 1 | Year | |
| 36 | 36 | 4th Year Maintenance cost | 1 | Year | |
| 37 | 37 | 5th Year Maintenance cost | 1 | Year | |
| 38 | 38 | 5th Year Maintenance cost | 1 | Year | |
| 39 | 39 | Labour Cess (1%) | 1 | RS | |
| 40 | 40 | GST (12%) | 1 | RS |
AI Tender Summary
Tender Timeline
Jan 22, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedJan 28, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 31, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender