Food Corporation Of India-FCI has published Annual Repair Maintenance Of Works For Year 2019 20 At Fsd Churaibari Tripura . Sh Replacement Of Existing Ac Sheet With Precoated Galvanised Iron Profile Sheet For Godown No . 1 And Other Annual Repairs. Submission Date for this Tender is 27-01-2020. Civil Work Tenders in FCI, FSD Churaibari Tripura. Bidders can get complete Tender details and download the document.
| Name of Work:ARMO works for 2019-20 at FSD Churaibari, Tripura. SH: Replacement of existing AC Sheet with precoated galvanised iron profile sheet for Godown 1 and other annual repairs. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: Asbestos cement sheet | BI01010001010000000000000515BI0100001113 | 1217.7 | sqm |
| 2 | 2 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | BI01010001010000000000000515BI0100001114 | 1217.7 | sqm |
| 3 | 3 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete Ridges plain (500 - 600mm) | BI01010001010000000000000515BI0100001115 | 66 | metre |
| 4 | 4 | Extra for providing and fixing wind ties of 40x 6 mm flat iron section | BI01010001010000000000000515BI0100001116 | 330 | metre |
| 5 | 5 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2coarse sand : 4 stone aggregate 10 mm and down gauge), includingfinishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design In 75x75 mm deep chase | BI01010001010000000000000515BI0100001117 | 96 | metre |
| 6 | 6 | Supply , installation, testing & commissioning of turbo ventilators size 22” in stainless steel 430 grade with approximate weight 4.85kg having a CFM-7 kg per hour 2440 with blade length 369mm wings of 80mm & following specification turbo ventilators available in stainless steel size 22”55 grade 430 no of outer wings =24(22”) no of inner wings =6(22”) fan base=nylon top and bottom 55430 inside material=nylon fan blade OD600 mm (for 22”) nylon blade ring=560mm.Total fan height 360mm self lubricating bearing )for 22”) | BI01010001010000000000000515BI0100001118 | 8 | each |
| 7 | 7 | Credit for old dismantled asbestos Sheets on as is where is basis including taking away from depot complex, | BI01010001010000000000000515BI0100001119 | 1217.7 | sqm |
| 8 | 8 | Repairing and Greasing of rolling shutters at the rate of 500 grams yellow cup grease of good quality each shutter after cleaning with Kerosene oil properly including tensioning of springs/ replacement of spring wherever required including replacement of damaged stripes and side koni complete and making easy push & pull operation and removing the top cover and refixing the same after greasing with all materials and labour etc., complete as directed by Engineer-in-charge. (This excludes the cost of spring and strips but including the cost of side koni). (Analysed item based on DSR 2016 rates) | BI01010001010000000000000515BI0100001120 | 4 | each |
| 9 | 9 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works | BI01010001010000000000000515BI0100001121 | 178 | sqm |
| 10 | 10 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture | BI01010001010000000000000515BI0100001122 | 85 | sqm |
| 11 | 11 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001123 | 1 | cum |
| 12 | 12 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) | BI01010001010000000000000515BI0100001124 | 1 | cum |
| 13 | 13 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. With cement mortar 1:4 (1 cement : 4 fine sand) | BI01010001010000000000000515BI0100001125 | 90 | sqm |
| 14 | 14 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.:Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | BI01010001010000000000000515BI0100001127 | 75 | Cum |
| 15 | 15 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.:Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) | BI01010001010000000000000515BI0100001128 | 50 | cum |
| 16 | 16 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | BI01010001010000000000000515BI0100001129 | 96.98 | cum |
| 17 | 17 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001131 | 37.13 | Cum |
| 18 | 18 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20 mm nominal size stone aggregate | BI01010001010000000000000515BI0100001133 | 74.25 | Cum |
| 19 | 19 | Providing and fixing glass strips in joints of terrazo/cement concrete floors:50 mm wide and 4 mm thick | BI01010001010000000000000515BI0100001134 | 2020 | Metre |
| 20 | 20 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below | BI01010001010000000000000515BI0100001136 | 22 | Each |
| 21 | 21 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | BI01010001010000000000000515BI0100001137 | 192 | Kg |
| 22 | 22 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.500 mm thickness. | BI01010001010000000000000515BI0100001138 | 17.28 | sqm |
| 23 | 23 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm | BI01010001010000000000000515BI0100001139 | 17.28 | sqm |
| 24 | 24 | Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001140 | 30 | sqm |
| 25 | 25 | Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. | BI01010001010000000000000515BI0100001141 | 2 | Each |
| 26 | 26 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid | BI01010001010000000000000515BI0100001142 | 1 | Each |
| 27 | 27 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings andWhite Vitreous China Surgeon type wash basin of size 660 x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow including operated levers ISI Marked | BI01010001010000000000000515BI0100001143 | 1 | each |
| 28 | 28 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. | BI01010001010000000000000515BI0100001144 | 2 | each |
| 29 | 29 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm\n | BI01010001010000000000000515BI0100001145 | 2 | each |
| 30 | 30 | Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5 mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100 mm x 8 mm complete as per manufacturer's specifications and direction of Engineer-in-charge Decorative finish (both side wood grained finish). | BI01010001010000000000000515BI0100001146 | 2 | sqm |
| 31 | 31 | Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer's specification and direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001147 | 12.4 | metre |
| 32 | 32 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc 25 mm dia nominal bore | BI01010001010000000000000515BI0100001148 | 30 | metre |
| 33 | 33 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc 15 mm dia nominal bore | BI01010001010000000000000515BI0100001149 | 30 | metre |
| 34 | 34 | Providing and fixing brass bib cock of approved quality : 20 mm nominal bore | BI01010001010000000000000515BI0100001150 | 4 | Each |
| 35 | 35 | Lettering with black Japan paint of approved brand and manufacture | BI01010001010000000000000515BI0100001151 | 7710 | per letter per cm height |
| 36 | 36 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm | BI01010001010000000000000515BI0100001152 | 150 | sqm |
| 37 | 37 | Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3kg/sqm. | BI01010001010000000000000515BI0100001153 | 150 | sqm |
| 38 | 38 | Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. | BI01010001010000000000000515BI0100001154 | 150 | sqm |
| 39 | 39 | Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001156 | 4.8 | Cum |
| 40 | 40 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001158 | 0.09 | Cum |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
