Construction And Renovation Works Of Bh College , Barpeta
Tender Value
1.60 Crore
Estimated cost
Bid Submission
06 Feb 2020
0 days left
EMD
3.20 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Principal B H College, Howly → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction And Renovation Works Of Bh College , Barpeta
BOQ
| Name of Work: Construction and Renovation works of BH College, Barpeta | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Construction of Proposed Horizontal Extension of College Building for Class Room, Ground Floor only (Provision of G+2) | Anx-A_1 | ||
| 2 | 2 | A) Civil Works :- | Anx-A_2 | ||
| 3 | 3 | Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. | Anx-A_3 | ||
| 4 | 4 | (A) Up to a depth of 2.00m below the existing ground level. | Anx-A_4 | ||
| 5 | 5 | (a) In ordinary soil | Anx-A_5 | 753.38 | Cum |
| 6 | 6 | Shuttering and shoring the earth at different levels in foundations where necessary with required prop, struts, planks, timbers, nails etc. including dewatering if necessary, complete as directed and specified (measurement to be taken in the face area timbered) | Anx-A_6 | ||
| 7 | 7 | (b) Above 1.5 m upto 3.00 m depth | Anx-A_7 | 707.23 | Cum |
| 8 | 8 | Supplying and filling sand gravel in foundation trenches of column footings over slushy soil including local carriage of materials within 8 km pumping out of water, ramming etc. complete for strengthening the bearing capacity of the soil as directed and specified including payment of Forest Royalty and Sales Tax and other duties and taxes as may be necessary. | Anx-A_8 | 326.42 | Cum |
| 9 | 9 | FILLING | Anx-A_9 | ||
| 10 | 10 | Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. | Anx-A_10 | ||
| 11 | 11 | (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading. | Anx-A_11 | 396.98 | Cum |
| 12 | 12 | PCC | Anx-A_12 | ||
| 13 | 13 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). | Anx-A_13 | ||
| 14 | 14 | (a) In prop 1cement: 3 sand :6 coarse aggregate by volume | Anx-A_14 | 42.02 | Cum |
| 15 | 15 | Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. | Anx-A_15 | ||
| 16 | 16 | c) 100mm thick | Anx-A_16 | 396.98 | Sqm |
| 17 | 17 | Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. | Anx-A_17 | 30.77 | Sqm |
| 18 | 18 | REINFORCED CEMENT CONCRETE WORKS | Anx-A_18 | ||
| 19 | 19 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) | Anx-A_19 | ||
| 20 | 20 | (I) Using Mixer Machine | Anx-A_20 | ||
| 21 | 21 | (A) In substructure up to plinth level | Anx-A_21 | ||
| 22 | 22 | Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. | Anx-A_22 | ||
| 23 | 23 | P) Using admixture, plasticiser etc for air entraining, water reducing purposes including addition of agent for changing normal setting time of concrete as required. | Anx-A_23 | ||
| 24 | 24 | b) M20 grade concrete or Prop. 1:1.5:3 | Anx-A_24 | 154.1 | Cum |
| 25 | 25 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) | Anx-A_25 | ||
| 26 | 26 | (I) Using Mixer Machine | Anx-A_26 | ||
| 27 | 27 | (B) In super structure from plinth level up to 1st floor level. | Anx-A_27 | ||
| 28 | 28 | ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. | Anx-A_28 | ||
| 29 | 29 | P) Using admixture, plasticiser etc for air entraining, water reducing purposes including addition of agent for changing normal setting time of concrete as required. | Anx-A_29 | ||
| 30 | 30 | b) M20 grade concrete or Prop. 1:1.5:3 | Anx-A_30 | 123.17 | Cum |
| 31 | 31 | TIMBER SHUTTERING (FORMWORK) | Anx-A_31 | ||
| 32 | 32 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: | Anx-A_32 | ||
| 33 | 33 | Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. | Anx-A_33 | ||
| 34 | 34 | (b) Using 25mm thick plank | Anx-A_34 | 84.13 | Sqm |
| 35 | 35 | PLYBOARD SHUTTERING (FORMWORK) | Anx-A_35 | ||
| 36 | 36 | Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: | Anx-A_36 | ||
| 37 | 37 | Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face | Anx-A_37 | 238.08 | Sqm |
| 38 | 38 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. | Anx-A_38 | ||
| 39 | 39 | (a) For depth not exceeding 1.0M. | Anx-A_39 | 578.25 | Sqm |
| 40 | 40 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. | Anx-A_40 | ||
| 41 | 41 | (a) Floors etc. upto 200mm in thickness. | Anx-A_41 | 599.06 | Sqm |
| 42 | 42 | Staircase with sloping or stepped soffits including risers and stringers but excluding Landing. | Anx-A_42 | 28.78 | Sqm |
| 43 | 43 | MASONARY WORKS | Anx-A_43 | ||
| 44 | 44 | Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. | Anx-A_44 | ||
| 45 | 45 | (a) Brick on flat soling. | Anx-A_45 | 629.2 | Sqm |
| 46 | 46 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. | Anx-A_46 | ||
| 47 | 47 | (I) In Sub-structure upto plinth level including dewatering if necessary | Anx-A_47 | ||
| 48 | 48 | (b) In proportion 1:4. | Anx-A_48 | 55.52 | Cum |
| 49 | 49 | 112 mm thick 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) | Anx-A_49 | ||
| 50 | 50 | (a) In cement mortar in proportion 1:4. \n(1 cement:4 sand) | Anx-A_50 | 439.38 | Sqm |
| 51 | 51 | FLOORING | Anx-A_51 | ||
| 52 | 52 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) | Anx-A_52 | ||
| 53 | 53 | b) Executive range \nSomany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make | Anx-A_53 | ||
| 54 | 54 | i) Of size 800mmx800mm and above | Anx-A_54 | 342.81 | Sq.m |
| 55 | 55 | MARBLE FLOORING | Anx-A_55 | ||
| 56 | 56 | 18 mm thick Marble stone slab flooring of sizes 1200x1200 including treads and risers of steps, skirting, laid over 20 mm thick base of cement plaster 1:6 (1 cement : 6 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with marble slab of specified quality and shade at all levels. | Anx-A_56 | ||
| 57 | 57 | (i) Dungri slab | Anx-A_57 | 135.28 | Sq.m |
| 58 | 58 | PLASTERING | Anx-A_58 | ||
| 59 | 59 | 10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed. | Anx-A_59 | ||
| 60 | 60 | (b) In cement mortar 1:4 | Anx-A_60 | 670.52 | Sqm |
| 61 | 61 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. | Anx-A_61 | ||
| 62 | 62 | (b) In cement mortar 1:4 | Anx-A_62 | 494.25 | Sqm |
| 63 | 63 | 20 mm thick Cement plaster in two coats on single or half brick walls for interior plastering up to 1st floor level including arises, internal rounded angles,chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. | Anx-A_63 | ||
| 64 | 64 | A) On rough side (backing coat 15 mm and finishing coat 5mm thick) | Anx-A_64 | ||
| 65 | 65 | b) In cement mortar 1:4 | Anx-A_65 | 545.79 | Sqm |
| 66 | 66 | Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed. | Anx-A_66 | 670.52 | Sqm |
| 67 | 67 | Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall up to a height of 1st floor level above ground level including curing complete as directed. | Anx-A_67 | ||
| 68 | 68 | b) On two coat plaster | Anx-A_68 | 545.79 | Sqm |
| 69 | 69 | WOODWORK | Anx-A_69 | ||
| 70 | 70 | Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. | Anx-A_70 | ||
| 71 | 71 | (a) With sal wood | Anx-A_71 | 0.24 | Cum |
| 72 | 72 | Providing, fitting and fixing factory made wooden panelled doors with panel inserts of 75mm to 50mm width and 12mm to 20mm thickness,joined together with continous tongue and groove joints glued together with Movicol or other approved adhesive leaving a vertical groove of 7.5mm to 15mm between the inserts,the edges of panel inserts being feather tongue into styles and rails including providing three pairs of oxidised M.S butt hinges (100mm x75 mm x3.55mm) and furnishing with moulded timber beading of size 25mmx15mm around the panels complete as per drawing (moulded timber bead and all fittings except hinges to be paid separately) | Anx-A_72 | ||
| 73 | 73 | a) With Teak wood / Sissu wood. | Anx-A_73 | ||
| 74 | 74 | (i) 40 mm thick with panel inserts of 20mm thickness. | Anx-A_74 | 8.82 | Sqm |
| 75 | 75 | GRILL | Anx-A_75 | ||
| 76 | 76 | Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. | Anx-A_76 | ||
| 77 | 77 | II Ornamental grill | Anx-A_77 | ||
| 78 | 78 | (c) Fixed to Brickwork/P.C.C/R.C.C. | Anx-A_78 | 546 | Kg |
| 79 | 79 | ALUMINIUM WORKS | Anx-A_79 | ||
| 80 | 80 | Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels. | Anx-A_80 | ||
| 81 | 81 | (b)3 Track sliding window | Anx-A_81 | ||
| 82 | 82 | (i)6mm clear glass | Anx-A_82 | 39 | Sqm |
| 83 | 83 | PAINTING WORKS | Anx-A_83 | ||
| 84 | 84 | Providing surface preparation for walls, celling etc.using average 1.50 mm thick plaster of paris including clearing, rubbing with sand paper, filling gaps, depression etc. where necessary, with chalk powder and and plaster of paris paste, making the surface even and smooth complete at all levels as specified and directed. | Anx-A_84 | 1164.77 | Sqm |
| 85 | 85 | Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) | Anx-A_85 | 545.79 | Sqm |
| 86 | 86 | a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | Anx-A_86 | 1164.77 | Sqm |
| 87 | 87 | Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. | Anx-A_87 | ||
| 88 | 88 | (a).Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) | Anx-A_88 | 1164.77 | Sqm |
| 89 | 89 | Applying one self-priming coat of acrylic emulsion coating of Unicem \"Rakshak\" brand by thinning 1ltrs of paints with 1ltrs of water over freshly plastered wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth as specified and directed by the department. | Anx-A_89 | 545.79 | Sqm |
| 90 | 90 | Supplying and applying interior/exterior walls/ floors/ roofs one coat of Epoxy Primer of Jenson & Nicholson/ Nerolac brand as priming coat after cleaning and clearing the surfaces as specified and directed and then applying two coats of Epoxy paints of Jenson & Nicholson/ Nerolac brand of required shade on walls/ floors/ roof surfaces as specified and directed complete including scaffolding at all levels. | Anx-A_90 | 545.79 | Sqm |
| 91 | 91 | Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. | Anx-A_91 | ||
| 92 | 92 | (b) With ready mixed paint , wood primer (white). | Anx-A_92 | 17.64 | Sqm |
| 93 | 93 | Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. | Anx-A_93 | ||
| 94 | 94 | a) With ready mixed \"red-lead/ red oxide\" primer. | Anx-A_94 | 78 | Sqm |
| 95 | 95 | Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. | Anx-A_95 | ||
| 96 | 96 | (i)Surfaces over 100mm in width or girth. | Anx-A_96 | ||
| 97 | 97 | b) High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | Anx-A_97 | 78 | Sqm |
| 98 | 98 | VARNISHING, POLISHING, OILING | Anx-A_98 | ||
| 99 | 99 | Varnishing two coats (excluding priming coat) on new wood and wood based surfaces under coating with flatting varnish and finishing coat with copal varnish or spar varnish to give an even surface including cleaning the surface of all dirt,dust and filling the knots,crack etc with specially made wood putty and sand papering so as to produce a smooth,dry and matt surface. | Anx-A_99 | ||
| 100 | 100 | (i) Surfaces over 100mm in width or girth. | Anx-A_100 | 17.64 | Sqm |
| 101 | 101 | Polishing with french sprit polishing on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust sand papered smooth and including a coat of wood filter | Anx-A_101 | 17.64 | Sqm |
| 102 | 102 | Applying two coats of wood preservative oil,colourless (Burger Products) on new wood and wood based surfaces, after including preparing the surface by throughly cleaning oil,grease,dirt and other foreign matter, sand papering and knotting. | Anx-A_102 | 17.64 | Sqm |
| 103 | 103 | DOOR AND WINDOW FITTINGS | Anx-A_103 | ||
| 104 | 104 | Supplying, fitting, fixing brass fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary c.p. brass screws etc. complete.( bright natural matt & satin finished ). | Anx-A_104 | ||
| 105 | 105 | a) Sliding door bolts | Anx-A_105 | ||
| 106 | 106 | i) 300 mm x 16 mm | Anx-A_106 | 8 | Each |
| 107 | 107 | b) Tower bolts | Anx-A_107 | ||
| 108 | 108 | ii) 300 mm x 10 mm | Anx-A_108 | 16 | Each |
| 109 | 109 | c) Door handles | Anx-A_109 | ||
| 110 | 110 | iii) 150mm | Anx-A_110 | 8 | Each |
| 111 | 111 | e) Butt hinge | Anx-A_111 | ||
| 112 | 112 | i) 125mm x 50mm x 4mm | Anx-A_112 | 20 | Each |
| 113 | 113 | o) Mortice cylindrical type(Godrej make)-polished Brass | Anx-A_113 | 4 | Each |
| 114 | 114 | Providing,fitting and fixing Door closer of various type UL listed and fire rated good quality depending on the door specification.Types like single speed,Double Speed,Heavy Duty etc are available and as directed & specified by the department. | Anx-A_114 | ||
| 115 | 115 | A) Godrej | Anx-A_115 | ||
| 116 | 116 | e) Concealed Door Closer ( 230mm x 76.5mm x 30.5mm) | Anx-A_116 | 4 | Each |
| 117 | 117 | REINFORCEMENT | Anx-A_117 | ||
| 118 | 118 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) | Anx-A_118 | ||
| 119 | 119 | a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL | Anx-A_119 | ||
| 120 | 120 | (i) TMT Corrosion resistant steel (CRS) reiforcement bar | Anx-A_120 | 254.51 | Qtl |
| 121 | 121 | Prviding and fixing Stainless Steel (Grade 304) railing made of hollow tubes, channels, plates etc. Including welding, grinding, buffing, polishing and making curvature ( where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, i.e. fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top floor or the side of waist slab with suitable arrangement as per approval of Engineer in charge. (For payment only weight of stainless steel is to be considered. No extra payment for fixing accessories such as nuts, bolts, fasterens etc. will be considered) | Anx-A_121 | 129.6 | Kg |
| 122 | 122 | PLINTH PROTECTION WORKS | Anx-A_122 | ||
| 123 | 123 | Providing plinth protection with bricks flat laid in cement mortar 1: 4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish. | Anx-A_123 | 90.7 | Sqm |
| 124 | 124 | Providing drain with cement concrete (1:3:6) 10cm thick sides 10cm thick bed over brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. | Anx-A_124 | ||
| 125 | 125 | ii) 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm. | Anx-A_125 | 90.7 | Rm |
| 126 | 126 | ANTI TERMITE TREATMENT | Anx-A_126 | ||
| 127 | 127 | Pre construction anti - termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square meter of the surface to be spread with light rodding so as to ensure proper absorption by the filled up earth (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. | Anx-A_127 | ||
| 128 | 128 | a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. | Anx-A_128 | 396.98 | Sqm |
| 129 | 129 | FIRE EXTINGUISHER | Anx-A_129 | ||
| 130 | 130 | Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI mark and CO2 cartridge will be confirming to IS: 4947 with ISI mark, Powder will be confirming to IS: 4308 with ISI Mark (5 KG) \nBRAND : FIRESTOP / FIREND / FIRE SHIELD | Anx-A_130 | 4 | Each |
| 131 | 131 | B) Internal Electrification L/S as per APWD Schedule (L/S Amount: Rs.738977): | Anx-A_131 | 1 | L/S |
| 132 | 132 | D) Add for Site Clearance (L/S Amount Rs.100000) | Anx-A_132 | 1 | L/S |
| 133 | 133 | Repairing and Renovation of Existing Auditorium: | Anx-A_133 | ||
| 134 | 134 | Civil Work: | Anx-A_134 | ||
| 135 | 135 | Dismantling all types of corrugated/ trapezoidal sheet roofing including ridges, hips, valleys and gutters etc. and stacking the materials as directed by the department for all levels | Anx-A_135 | 999.6 | Sqm |
| 136 | 136 | Demolishing CC floors of various thickness including top layer and base course and disposal of debris as directed for all levels. | Anx-A_136 | 863.73 | Sqm |
| 137 | 137 | Dismantling all types of ceiling, partition and wall lining and stacking the materials as directed by the department for all levels | Anx-A_137 | 863.73 | Sqm |
| 138 | 138 | Flooring | Anx-A_138 | ||
| 139 | 139 | 65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 25mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg. per square metre of floor area) including curing etc. complete as directed. | Anx-A_139 | 863.73 | Sqm |
| 140 | 140 | Wooden planking in flooring including fixing to wooden base frame with necessary wood-screws complete (base of the wooden frame to be measured and paid separately.) | Anx-A_140 | ||
| 141 | 141 | With 38 mm thick Indian Teak wood plank, tongue and groove jointed. | Anx-A_141 | 26.4 | Sqm |
| 142 | 142 | ROOFING | Anx-A_142 | ||
| 143 | 143 | Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) \nTATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement | Anx-A_143 | ||
| 144 | 144 | (v) 0.80 mm thick | Anx-A_144 | 999.6 | Sqm |
| 145 | 145 | Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete complete.\nTATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement | Anx-A_145 | 39 | Sqm |
| 146 | 146 | ACOUSTIC TREATMENT | Anx-A_146 | ||
| 147 | 147 | Providing & fixing Armstrong Mineral fibre Acoustical suspended ceiling system with optra FG ( board/tegular) edge tiles with armstrong XL 24mm exposed grid (600x600x15)mm | Anx-A_147 | 650.16 | Sqm |
| 148 | 148 | Supplying, fitting and fixing Sound Soak NSS Cord (FSS Cord) wrapped acoustical wall panel system of Anutone Acoustics Ltd. Including all fixtures and fittings. | Anx-A_148 | ||
| 149 | 149 | a) 20 MM | Anx-A_149 | 226.72 | Sqm |
AI Tender Summary
Tender Timeline
Jan 21, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 06, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 10, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender