Construction Works Of Tihu College , Tihu , Nalbari
Tender Value
1 Crore
Estimated cost
Bid Submission
06 Feb 2020
0 days left
EMD
2 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Principal Tihu College, Tihu, Nalbari → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Works Of Tihu College , Tihu , Nalbari
BOQ
| Name of Work: Construction works of Tihu College, Tihu, Nalbari | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | NAME OF PROJECT : Detailed Estimate for Construction of Academic Building (Class rooms & Laboratories) | Anx-A_1 | ||
| 2 | 2 | Ground Flooor (Class Room) | Anx-A_2 | ||
| 3 | 3 | EXCAVATION | Anx-A_3 | ||
| 4 | 4 | Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. | Anx-A_4 | ||
| 5 | 5 | (A) Up to a depth of 2.00m below the existing ground level. | Anx-A_5 | ||
| 6 | 6 | (a) In ordinary soil | Anx-A_6 | 190 | Cum |
| 7 | 7 | Shuttering and shoring the earth at different levels in foundations where necessary with required prop, struts, planks, timbers, nails etc. including dewatering if necessary, complete as directed and specified (measurement to be taken in the face area timbered) | Anx-A_7 | ||
| 8 | 8 | (a) Upto a depth of 1.5 metre | Anx-A_8 | 195 | Cum |
| 9 | 9 | FILLING | Anx-A_9 | ||
| 10 | 10 | Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. | Anx-A_10 | ||
| 11 | 11 | (b) Other than Guwahati city | Anx-A_11 | 205 | Cum |
| 12 | 12 | ANTI TERMITE TREATMENT | Anx-A_12 | ||
| 13 | 13 | Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. | Anx-A_13 | ||
| 14 | 14 | b) with aqueous emulsion having concentration 1:499 with Premise 350 SC (Imidachloprid 30.5% SC) and water, i.e. 0.07% solution. | Anx-A_14 | 227 | Sqm |
| 15 | 15 | PCC | Anx-A_15 | ||
| 16 | 16 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). | Anx-A_16 | ||
| 17 | 17 | (a) In prop 1cement: 3 sand :6 coarse aggregate by volume | Anx-A_17 | 40 | Cum |
| 18 | 18 | Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. | Anx-A_18 | 35 | Sqm |
| 19 | 19 | PLINTH PROTECTION AND DRAIN | Anx-A_19 | ||
| 20 | 20 | Providing plinth protection 50mm thick to cement concrete 1 : 3 : 6 with coarse agg.of 20mm nominal size including finishing the surface with 10mm thick cement plaster in proportion 1:3 with a floting coat of neat cement finished. | Anx-A_20 | 85 | Sqm |
| 21 | 21 | Providing drain with cement concrete (1:3:6) 10cm thick sides 10cm thick bed over brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. | Anx-A_21 | ||
| 22 | 22 | i) 300mm wide and average 150mm deep with bed slope 1 in 150 with initial depth of 100mm. | Anx-A_22 | 35 | Rm |
| 23 | 23 | RCC Work with Shuttering | Anx-A_23 | ||
| 24 | 24 | Providing and laying plain/reinforced cement croncrete works using cement, coarse sand & 20mm down graded stone aggregate with cost of necessary form work including dewatering if necessary, and curing for reinforced cement concrete work complete as directed (Reinforcement will be measured and paid separately) | Anx-A_24 | ||
| 25 | 25 | (I) Using Mixer Machine | Anx-A_25 | ||
| 26 | 26 | (A) In substructure up to plinth level | Anx-A_26 | ||
| 27 | 27 | Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. | Anx-A_27 | ||
| 28 | 28 | N) Without using admixture, plasticiser | Anx-A_28 | ||
| 29 | 29 | (b) M20 or Prop. 1:11/2:3 | Anx-A_29 | 46 | Cum |
| 30 | 30 | B) In super structure up to 1st floor level | Anx-A_30 | ||
| 31 | 31 | i) Vertical members like column, pillars, post, struts etc | Anx-A_31 | ||
| 32 | 32 | N) Without using admixture, plasticiser | Anx-A_32 | ||
| 33 | 33 | (b) M20 or Prop. 1:11/2:3 | Anx-A_33 | 35 | Cum |
| 34 | 34 | iii) Suspended floor (Slab, balcony, staircase etc) | Anx-A_34 | ||
| 35 | 35 | N) Without using admixture, plasticiser | Anx-A_35 | ||
| 36 | 36 | (a) M15 or Prop. 1:2:4 | Anx-A_36 | 26 | Cum |
| 37 | 37 | REINFORCEMENT | Anx-A_37 | ||
| 38 | 38 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) | Anx-A_38 | ||
| 39 | 39 | (ii)Super Ductile (SD) TMT reinforcement bars | Anx-A_39 | 96.3 | Qtl |
| 40 | 40 | c) ISI approved Mild steel reinforcement bar(M.S.Bar) | Anx-A_40 | 8 | Qtl |
| 41 | 41 | TIMBER SHUTTERING (FORMWORK) | Anx-A_41 | ||
| 42 | 42 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: | Anx-A_42 | ||
| 43 | 43 | Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. | Anx-A_43 | ||
| 44 | 44 | (b) Using 25mm thick plank | Anx-A_44 | 80 | Sqm |
| 45 | 45 | Sides of tie beams, grade beams etc. at or below ground level. | Anx-A_45 | ||
| 46 | 46 | (b) Using 25mm thick plank | Anx-A_46 | 108 | Sqm |
| 47 | 47 | Columns, Pillars, Posts & Strut | Anx-A_47 | ||
| 48 | 48 | (a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face | Anx-A_48 | ||
| 49 | 49 | (ii) Using 25mm thick plank | Anx-A_49 | 210 | Sqm |
| 50 | 50 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. | Anx-A_50 | ||
| 51 | 51 | (a) For depth not exceeding 1.0M. | Anx-A_51 | ||
| 52 | 52 | (ii) Using 25mm thick plank | Anx-A_52 | 90 | Sqm |
| 53 | 53 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. | Anx-A_53 | ||
| 54 | 54 | (a) Floors etc. upto 200mm in thickness. | Anx-A_54 | ||
| 55 | 55 | (ii) Using 25mm thick plank | Anx-A_55 | 210 | Sqm |
| 56 | 56 | Staircase with sloping or stepped soffits including risers and stringers but excluding Landing. (Using 38mm thick plank) | Anx-A_56 | 15 | Sqm |
| 57 | 57 | MASONARY WORKS | Anx-A_57 | ||
| 58 | 58 | Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. | Anx-A_58 | ||
| 59 | 59 | (a) Brick on flat soling. | Anx-A_59 | 411 | Sqm |
| 60 | 60 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. | Anx-A_60 | ||
| 61 | 61 | (I) In Sub-structure upto plinth level including dewatering if necessary | Anx-A_61 | ||
| 62 | 62 | (b) In proportion 1:4. | Anx-A_62 | 42 | Cum |
| 63 | 63 | 112 mm thick 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) | Anx-A_63 | ||
| 64 | 64 | (a) In cement mortar in proportion 1:4. \n(1 cement:4 sand) | Anx-A_64 | 295 | Sqm |
| 65 | 65 | PLASTERING | Anx-A_65 | ||
| 66 | 66 | 10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed. | Anx-A_66 | ||
| 67 | 67 | d) In cement mortar 1:6 | Anx-A_67 | ||
| 68 | 68 | i) In super structure up to 1st floor level | Anx-A_68 | 440 | Sqm |
| 69 | 69 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. | Anx-A_69 | ||
| 70 | 70 | B) On fair side | Anx-A_70 | ||
| 71 | 71 | d) In cement mortar 1:6 | Anx-A_71 | 440 | Sqm |
| 72 | 72 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. | Anx-A_72 | ||
| 73 | 73 | d) In cement mortar 1:6 | Anx-A_73 | 235 | Sqm |
| 74 | 74 | WALL TILES | Anx-A_74 | ||
| 75 | 75 | Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). | Anx-A_75 | ||
| 76 | 76 | a) Normal range \nSomany/ Orient/Nitco/Asian Make | Anx-A_76 | ||
| 77 | 77 | ii) Of size 200mmx300mm and above | Anx-A_77 | 68 | Sqm |
| 78 | 78 | FLOOR TILES | Anx-A_78 | ||
| 79 | 79 | Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed. | Anx-A_79 | ||
| 80 | 80 | (A) CERAMIC | Anx-A_80 | ||
| 81 | 81 | i)Normal range (Sizes 300 mm x 300mm and above) | Anx-A_81 | 32 | Sqm |
| 82 | 82 | VERTIFIED TILES | Anx-A_82 | ||
| 83 | 83 | A) ON FLOOR | Anx-A_83 | ||
| 84 | 84 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) | Anx-A_84 | ||
| 85 | 85 | a) Normal range \nSomany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make | Anx-A_85 | ||
| 86 | 86 | i) Of size 400mmx400mm and above | Anx-A_86 | 110 | Sq.m |
| 87 | 87 | PAINTING WORKS | Anx-A_87 | ||
| 88 | 88 | c) Applying one coat of distemper primer of approved brand and manufacture on wall surface after throughly brushing the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | Anx-A_88 | 675 | Sqm |
| 89 | 89 | Providing two coats of J.K Wall Putty ( White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) | Anx-A_89 | 675 | Sqm |
| 90 | 90 | Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. | Anx-A_90 | ||
| 91 | 91 | (a) Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) | Anx-A_91 | 675 | Sqm |
| 92 | 92 | ANODIZED ALUMINIUM WORKS | Anx-A_92 | ||
| 93 | 93 | Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels. | Anx-A_93 | ||
| 94 | 94 | (b)3 Track sliding window | Anx-A_94 | ||
| 95 | 95 | (i)6mm clear glass | Anx-A_95 | 59 | Sqm |
| 96 | 96 | DOORS | Anx-A_96 | ||
| 97 | 97 | Providing, fitting and fixing anodised aluminuim framed glazed doors with anodised aluminium frame made of 100mm x 45mm x 2.5mm section of approved brand with door style of size 88mm x 45mm x 2.5mm, top rails 50mm x 45mm x 2mm lock rails 100mm x 45mm x 2mm and bottom rails 100mm x 45mm x 2.5mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the department at all levels. | Anx-A_97 | ||
| 98 | 98 | (ii) 5mm frosted glass | Anx-A_98 | 15 | Sqm |
| 99 | 99 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) | Anx-A_99 | ||
| 100 | 100 | b) Tower bolts | Anx-A_100 | ||
| 101 | 101 | ii) 250mm x 12mm | Anx-A_101 | 15 | Nos |
| 102 | 102 | c) Door handles | Anx-A_102 | ||
| 103 | 103 | iii) 150mm | Anx-A_103 | 30 | Nos |
| 104 | 104 | t) Door stopper with rubber stopper | Anx-A_104 | 15 | Nos |
| 105 | 105 | GRILL | Anx-A_105 | ||
| 106 | 106 | Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. | Anx-A_106 | ||
| 107 | 107 | I . Plain grill | Anx-A_107 | ||
| 108 | 108 | (c) Fixed to Brickwork/P.C.C/R.C.C. | Anx-A_108 | 500 | Kg |
| 109 | 109 | Providing, fitting and fixing PVC Door shutters of Duroplast DPS 3720 make made fromm extruded PVC stiles and rails made from rigid PVC multicavity hollow chamber section of size 90mmx37mm (Toletance+ 1mm). The corners of the stiles and rails shall be metred out and fixed to each other with the help of solid plastic L-shaped brackets or M.S. rectangular tubular galvanised two nos of size 200mmx100mm and 100mmx100mm at each corner by self tapping steel screws. PVC multicavity hollow section of size 105mmx37mm shall be fixed in the middle by aluminium cleat and steel screws as lock rail. The section frame shall then be filled with PVC panels of approved colour of size 100mmx20mm. Then two numbers of bright steel rods of 6mm diameter shall be inserted horizontally through stiles and panels with two numbers of checknuts and washers all complete as specified and directed at all levels. (Door fixtures and fittings to be measured and paid seperately) | Anx-A_109 | 11 | Sqm |
| 110 | 110 | First Floor (Class Room) | Anx-A_110 | ||
| 111 | 111 | RCC Work with Shuttering | Anx-A_111 | ||
| 112 | 112 | Providing and laying plain/reinforced cement croncrete works using cement, coarse sand & 20mm down graded stone aggregate with cost of necessary form work including dewatering if necessary, and curing for reinforced cement concrete work complete as directed (Reinforcement will be measured and paid separately) | Anx-A_112 | ||
| 113 | 113 | B) In super structure up to 1st floor level | Anx-A_113 | ||
| 114 | 114 | i) Vertical members like column, pillars, post, struts etc | Anx-A_114 | ||
| 115 | 115 | N) Without using admixture, plasticiser | Anx-A_115 | ||
| 116 | 116 | (b) M20 or Prop. 1:11/2:3 | Anx-A_116 | 35 | Cum |
| 117 | 117 | iii) Suspended floor (Slab, balcony, staircase etc) | Anx-A_117 | ||
| 118 | 118 | N) Without using admixture, plasticiser | Anx-A_118 | ||
| 119 | 119 | (a) M15 or Prop. 1:2:4 | Anx-A_119 | 26 | Cum |
| 120 | 120 | REINFORCEMENT WORKS | Anx-A_120 | ||
| 121 | 121 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) | Anx-A_121 | ||
| 122 | 122 | (ii)Super Ductile (SD) TMT reinforcement bars | Anx-A_122 | 65 | Qtl |
| 123 | 123 | c) ISI approved Mild steel reinforcement bar(M.S.Bar) | Anx-A_123 | 6 | Qtl |
| 124 | 124 | TIMBER SHUTTERING (FORMWORK) | Anx-A_124 | ||
| 125 | 125 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: | Anx-A_125 | 112 | Sqm |
| 126 | 126 | Columns, Pillars, Posts & Strut | Anx-A_126 | ||
| 127 | 127 | (a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face | Anx-A_127 | ||
| 128 | 128 | (ii) Using 25mm thick plank | Anx-A_128 | 111.6 | Sqm |
| 129 | 129 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. | Anx-A_129 | ||
| 130 | 130 | (a) For depth not exceeding 1.0M. | Anx-A_130 | ||
| 131 | 131 | (ii) Using 25mm thick plank | Anx-A_131 | 93 | Sqm |
| 132 | 132 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. | Anx-A_132 | ||
| 133 | 133 | (a) Floors etc. upto 200mm in thickness. | Anx-A_133 | ||
| 134 | 134 | (ii) Using 25mm thick plank | Anx-A_134 | 227 | Sqm |
| 135 | 135 | Staircase with sloping or stepped soffits including risers and stringers but excluding Landing. (Using 38mm thick plank) | Anx-A_135 | 15 | Sqm |
| 136 | 136 | MASONARY WORKS | Anx-A_136 | ||
| 137 | 137 | 112 mm thick 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) | Anx-A_137 | ||
| 138 | 138 | (a) In cement mortar in proportion 1:4. \n(1 cement:4 sand) | Anx-A_138 | 330 | Sqm |
| 139 | 139 | PLASTERING | Anx-A_139 | ||
| 140 | 140 | 10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed. | Anx-A_140 | ||
| 141 | 141 | d) In cement mortar 1:6 | Anx-A_141 | ||
| 142 | 142 | i) In super structure up to 1st floor level | Anx-A_142 | 440 | Sqm |
| 143 | 143 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. | Anx-A_143 | ||
| 144 | 144 | B) On fair side | Anx-A_144 | ||
| 145 | 145 | d) In cement mortar 1:6 | Anx-A_145 | 440 | Sqm |
| 146 | 146 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. | Anx-A_146 | ||
| 147 | 147 | d) In cement mortar 1:6 | Anx-A_147 | 235 | Sqm |
| 148 | 148 | WALL TILES | Anx-A_148 | ||
| 149 | 149 | Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). | Anx-A_149 | ||
| 150 | 150 | a) Normal range \nSomany/ Orient/Nitco/Asian Make | Anx-A_150 | ||
| 151 | 151 | ii) Of size 200mmx300mm and above | Anx-A_151 | 68 | Sqm |
| 152 | 152 | FLOOR TILES | Anx-A_152 | ||
| 153 | 153 | Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed. | Anx-A_153 | ||
| 154 | 154 | (A) CERAMIC | Anx-A_154 | ||
| 155 | 155 | i)Normal range (Sizes 300 mm x 300mm and above) | Anx-A_155 | 32 | Sqm |
| 156 | 156 | VERTIFIED TILES | Anx-A_156 | ||
| 157 | 157 | A) ON FLOOR | Anx-A_157 | ||
| 158 | 158 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) | Anx-A_158 | ||
| 159 | 159 | a) Normal range \nSomany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make | Anx-A_159 | ||
| 160 | 160 | i) Of size 400mmx400mm and above | Anx-A_160 | 120 | Sq.m |
| 161 | 161 | PAINTING WORKS | Anx-A_161 | ||
| 162 | 162 | c) Applying one coat of distemper primer of approved brand and manufacture on wall surface after throughly brushing the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | Anx-A_162 | 675 | Sqm |
| 163 | 163 | Providing two coats of J.K Wall Putty ( White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) | Anx-A_163 | 675 | Sqm |
| 164 | 164 | Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. | Anx-A_164 | ||
| 165 | 165 | (a) Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) | Anx-A_165 | 675 | Sqm |
| 166 | 166 | ANODIZED ALUMINIUM WORKS | Anx-A_166 | ||
| 167 | 167 | Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels. | Anx-A_167 | ||
| 168 | 168 | (b)3 Track sliding window | Anx-A_168 | ||
| 169 | 169 | (i)6mm clear glass | Anx-A_169 | 59 | Sqm |
| 170 | 170 | DOORS | Anx-A_170 | ||
| 171 | 171 | Providing, fitting and fixing anodised aluminuim framed glazed doors with anodised aluminium frame made of 100mm x 45mm x 2.5mm section of approved brand with door style of size 88mm x 45mm x 2.5mm, top rails 50mm x 45mm x 2mm lock rails 100mm x 45mm x 2mm and bottom rails 100mm x 45mm x 2.5mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the department at all levels. | Anx-A_171 | ||
| 172 | 172 | (ii) 5mm frosted glass | Anx-A_172 | 15 | Sqm |
| 173 | 173 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) | Anx-A_173 | ||
| 174 | 174 | b) Tower bolts | Anx-A_174 | ||
| 175 | 175 | ii) 250mm x 12mm | Anx-A_175 | 15 | Nos |
| 176 | 176 | c) Door handles | Anx-A_176 | ||
| 177 | 177 | iii) 150mm | Anx-A_177 | 30 | Nos |
| 178 | 178 | t) Door stopper with rubber stopper | Anx-A_178 | 15 | Nos |
| 179 | 179 | GRILL | Anx-A_179 | ||
| 180 | 180 | Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. | Anx-A_180 | ||
| 181 | 181 | I . Plain grill | Anx-A_181 | ||
| 182 | 182 | (c) Fixed to Brickwork/P.C.C/R.C.C. | Anx-A_182 | 500 | Kg |
| 183 | 183 | Providing, fitting and fixing PVC Door shutters of Duroplast DPS 3720 make made fromm extruded PVC stiles and rails made from rigid PVC multicavity hollow chamber section of size 90mmx37mm (Toletance+ 1mm). The corners of the stiles and rails shall be metred out and fixed to each other with the help of solid plastic L-shaped brackets or M.S. rectangular tubular galvanised two nos of size 200mmx100mm and 100mmx100mm at each corner by self tapping steel screws. PVC multicavity hollow section of size 105mmx37mm shall be fixed in the middle by aluminium cleat and steel screws as lock rail. The section frame shall then be filled with PVC panels of approved colour of size 100mmx20mm. Then two numbers of bright steel rods of 6mm diameter shall be inserted horizontally through stiles and panels with two numbers of checknuts and washers all complete as specified and directed at all levels. (Door fixtures and fittings to be measured and paid seperately) | Anx-A_183 | 11 | Sqm |
| 184 | 184 | Second Floor (Class Room) | Anx-A_184 | ||
| 185 | 185 | RCC Work with Shuttering | Anx-A_185 | ||
| 186 | 186 | Providing and laying plain/reinforced cement croncrete works using cement, coarse sand & 20mm down graded stone aggregate with cost of necessary form work including dewatering if necessary, and curing for reinforced cement concrete work complete as directed (Reinforcement will be measured and paid separately) | Anx-A_186 | ||
| 187 | 187 | B) In super structure up to 1st floor level | Anx-A_187 | ||
| 188 | 188 | i) Vertical members like column, pillars, post, struts etc | Anx-A_188 | ||
| 189 | 189 | N) Without using admixture, plasticiser | Anx-A_189 | ||
| 190 | 190 | (b) M20 or Prop. 1:11/2:3 | Anx-A_190 | 24 | Cum |
| 191 | 191 | REINFORCEMENT WORKS | Anx-A_191 | ||
| 192 | 192 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) | Anx-A_192 | ||
| 193 | 193 | (ii)Super Ductile (SD) TMT reinforcement bars | Anx-A_193 | 21 | Qtl |
| 194 | 194 | c) ISI approved Mild steel reinforcement bar(M.S.Bar) | Anx-A_194 | 5 | Qtl |
| 195 | 195 | TIMBER SHUTTERING (FORMWORK) | Anx-A_195 | ||
| 196 | 196 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: | Anx-A_196 | 108 | Sqm |
| 197 | 197 | Columns, Pillars, Posts & Strut | Anx-A_197 | ||
| 198 | 198 | (a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face | Anx-A_198 | ||
| 199 | 199 | (ii) Using 25mm thick plank | Anx-A_199 | 111.6 | Sqm |
| 200 | 200 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. | Anx-A_200 | ||
| 201 | 201 | (a) For depth not exceeding 1.0M. | Anx-A_201 | ||
| 202 | 202 | (ii) Using 25mm thick plank | Anx-A_202 | 90 | Sqm |
| 203 | 203 | Staircase with sloping or stepped soffits including risers and stringers but excluding Landing. (Using 38mm thick plank) | Anx-A_203 | 15 | Sqm |
| 204 | 204 | MASONARY WORKS | Anx-A_204 | ||
| 205 | 205 | 112 mm thick 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) | Anx-A_205 | ||
| 206 | 206 | (a) In cement mortar in proportion 1:4. \n(1 cement:4 sand) | Anx-A_206 | 310 | Sqm |
| 207 | 207 | PLASTERING | Anx-A_207 | ||
| 208 | 208 | 10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed. | Anx-A_208 | ||
| 209 | 209 | d) In cement mortar 1:6 | Anx-A_209 | ||
| 210 | 210 | i) In super structure up to 1st floor level | Anx-A_210 | 440 | Sqm |
| 211 | 211 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. | Anx-A_211 | ||
| 212 | 212 | B) On fair side | Anx-A_212 | ||
| 213 | 213 | d) In cement mortar 1:6 | Anx-A_213 | 440 | Sqm |
| 214 | 214 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. | Anx-A_214 | ||
| 215 | 215 | d) In cement mortar 1:6 | Anx-A_215 | 235 | Sqm |
| 216 | 216 | WALL TILES | Anx-A_216 | ||
| 217 | 217 | Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). | Anx-A_217 | ||
| 218 | 218 | a) Normal range \nSomany/ Orient/Nitco/Asian Make | Anx-A_218 | ||
| 219 | 219 | ii) Of size 200mmx300mm and above | Anx-A_219 | 68 | Sqm |
| 220 | 220 | FLOOR TILES | Anx-A_220 | ||
| 221 | 221 | Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed. | Anx-A_221 | ||
| 222 | 222 | (A) CERAMIC | Anx-A_222 | ||
| 223 | 223 | i)Normal range (Sizes 300 mm x 300mm and above) | Anx-A_223 | 32 | Sqm |
| 224 | 224 | VERTIFIED TILES | Anx-A_224 | ||
| 225 | 225 | A) ON FLOOR | Anx-A_225 | ||
| 226 | 226 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) | Anx-A_226 | ||
| 227 | 227 | a) Normal range \nSomany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make | Anx-A_227 | ||
| 228 | 228 | i) Of size 400mmx400mm and above | Anx-A_228 | 120 | Sq.m |
| 229 | 229 | PAINTING WORKS | Anx-A_229 | ||
| 230 | 230 | c) Applying one coat of distemper primer of approved brand and manufacture on wall surface after throughly brushing the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | Anx-A_230 | 675 | Sqm |
| 231 | 231 | Providing two coats of J.K Wall Putty ( White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) | Anx-A_231 | 675 | Sqm |
| 232 | 232 | Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. | Anx-A_232 | ||
| 233 | 233 | (a) Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) | Anx-A_233 | 675 | Sqm |
| 234 | 234 | ANODIZED ALUMINIUM WORKS | Anx-A_234 | ||
| 235 | 235 | Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels. | Anx-A_235 | ||
| 236 | 236 | (b)3 Track sliding window | Anx-A_236 | ||
| 237 | 237 | (i)6mm clear glass | Anx-A_237 | 59 | Sqm |
| 238 | 238 | DOORS | Anx-A_238 | ||
| 239 | 239 | Providing, fitting and fixing anodised aluminuim framed glazed doors with anodised aluminium frame made of 100mm x 45mm x 2.5mm section of approved brand with door style of size 88mm x 45mm x 2.5mm, top rails 50mm x 45mm x 2mm lock rails 100mm x 45mm x 2mm and bottom rails 100mm x 45mm x 2.5mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the department at all levels. | Anx-A_239 | ||
| 240 | 240 | (ii) 5mm frosted glass | Anx-A_240 | 15 | Sqm |
| 241 | 241 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) | Anx-A_241 | ||
| 242 | 242 | b) Tower bolts | Anx-A_242 | ||
| 243 | 243 | ii) 250mm x 12mm | Anx-A_243 | 15 | Nos |
| 244 | 244 | c) Door handles | Anx-A_244 | ||
| 245 | 245 | iii) 150mm | Anx-A_245 | 30 | Nos |
| 246 | 246 | t) Door stopper with rubber stopper | Anx-A_246 | 15 | Nos |
| 247 | 247 | GRILL | Anx-A_247 | ||
| 248 | 248 | Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. | Anx-A_248 | ||
| 249 | 249 | I . Plain grill | Anx-A_249 | ||
| 250 | 250 | (c) Fixed to Brickwork/P.C.C/R.C.C. | Anx-A_250 | 480 | Kg |
| 251 | 251 | ROOF TRUSS | Anx-A_251 | ||
| 252 | 252 | Providing fitting, hoisting and fixing of roof trusses including purlins fabricated using MS circular hollow section conforming to relevant I.S. code, as per approved design and drawings including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide Zinc Chromate primer and two coats of approved enamel paints complete including fitting necessary cleats etc. for fixing ceiling joists as per design and drawing as directed. | Anx-A_252 | ||
| 253 | 253 | b) Using other ISI marked approved circular hollow section | Anx-A_253 | 28 | Qtl |
| 254 | 254 | Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) \nTATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement | Anx-A_254 | ||
| 255 | 255 | (ii) 0.45 mm thick | Anx-A_255 | 250 | Sqm |
| 256 | 256 | Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete complete.\nTATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement | Anx-A_256 | ||
| 257 | 257 | (ii) 0.45 mm thick | Anx-A_257 | 30 | Rm |
| 258 | 258 | Providing, fitting and fixing PVC Door shutters of Duroplast DPS 3720 make made fromm extruded PVC stiles and rails made from rigid PVC multicavity hollow chamber section of size 90mmx37mm (Toletance+ 1mm). The corners of the stiles and rails shall be metred out and fixed to each other with the help of solid plastic L-shaped brackets or M.S. rectangular tubular galvanised two nos of size 200mmx100mm and 100mmx100mm at each corner by self tapping steel screws. PVC multicavity hollow section of size 105mmx37mm shall be fixed in the middle by aluminium cleat and steel screws as lock rail. The section frame shall then be filled with PVC panels of approved colour of size 100mmx20mm. Then two numbers of bright steel rods of 6mm diameter shall be inserted horizontally through stiles and panels with two numbers of checknuts and washers all complete as specified and directed at all levels. (Door fixtures and fittings to be measured and paid seperately) | Anx-A_258 | 11 | Sqm |
| 259 | 259 | Lum-Sum Cost for Electrical work of Rs.388525 | Anx-A_259 | 1 | LS |
| 260 | 260 | Lum-Sum Cost for Sanitary work of Rs.271968 | Anx-A_260 | 1 | LS |
| 261 | 261 | Lum-sum cost for Water supply work of Rs.116557 | Anx-A_261 | 1 | LS |
AI Tender Summary
Tender Timeline
Jan 21, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 06, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 10, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender