Construction Works Of Moirabari College , Morigao
Tender Value
1 Crore
Estimated cost
Bid Submission
06 Feb 2020
0 days left
EMD
2 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Principal Moirabari College, Moirabari, Morigaon → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Works Of Moirabari College , Morigao
BOQ
| Name of Work: Construction works of Moirabari College, Morigaon | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Common Room at Moirabari College: | Anx-A_1 | ||
| 2 | 2 | CIVIL WORKS | Anx-A_2 | ||
| 3 | 3 | EARTHWORK IN EXCAVATION | Anx-A_3 | ||
| 4 | 4 | Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. | Anx-A_4 | ||
| 5 | 5 | (A) Up to a depth of 2.00m below the existing ground level. | Anx-A_5 | ||
| 6 | 6 | (a) In ordinary soil | Anx-A_6 | 81.56 | Cum |
| 7 | 7 | Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. | Anx-A_7 | ||
| 8 | 8 | (a) Brick on flat soling | Anx-A_8 | 182.34 | Sqm |
| 9 | 9 | PLAIN CEMENT CONCRETE WORKS | Anx-A_9 | ||
| 10 | 10 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). | Anx-A_10 | ||
| 11 | 11 | (b) In prop 1cement: 4 sand :8 coarse aggregate by volume | Anx-A_11 | 5.75 | Cum |
| 12 | 12 | REINFORCEMENT | Anx-A_12 | ||
| 13 | 13 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) | Anx-A_13 | ||
| 14 | 14 | a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL | Anx-A_14 | ||
| 15 | 15 | (i) TMT Corrosion resistant steel (CRS) reiforcement bar | Anx-A_15 | 84.58 | Qtl |
| 16 | 16 | SHUTTERING | Anx-A_16 | ||
| 17 | 17 | Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. | Anx-A_17 | ||
| 18 | 18 | (b) Using 25mm thick plank | Anx-A_18 | 88.35 | Sqm |
| 19 | 19 | Columns, Pillars, Posts & Strut | Anx-A_19 | ||
| 20 | 20 | (a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face | Anx-A_20 | ||
| 21 | 21 | (ii) Using 25mm thick plank | Anx-A_21 | 92.16 | Sqm |
| 22 | 22 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. | Anx-A_22 | ||
| 23 | 23 | (a) For depth not exceeding 1.0M. | Anx-A_23 | ||
| 24 | 24 | (i) Using 25mm thick plank | Anx-A_24 | 69.16 | Sqm |
| 25 | 25 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. | Anx-A_25 | ||
| 26 | 26 | (a) Floors etc. upto 200mm in thickness. | Anx-A_26 | ||
| 27 | 27 | (i) Using 25mm thick plank | Anx-A_27 | 154.13 | Sqm |
| 28 | 28 | Staircase with sloping or stepped soffits including risers and stringers but excluding Landing. (Using 38mm thick plank) | Anx-A_28 | 22.35 | Sqm |
| 29 | 29 | REINFORCED CEMENT CONCRETE WORKS | Anx-A_29 | ||
| 30 | 30 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) | Anx-A_30 | ||
| 31 | 31 | (I) Using Mixer Machine | Anx-A_31 | ||
| 32 | 32 | (A) In substructure up to plinth level | Anx-A_32 | ||
| 33 | 33 | Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. | Anx-A_33 | ||
| 34 | 34 | N) Without using admixture, plasticiser | Anx-A_34 | ||
| 35 | 35 | b) M20 grade concrete or Prop. 1:1.5:3 | Anx-A_35 | 18.9 | Cum |
| 36 | 36 | (B) In super structure from plinth level up to 1st floor level. | Anx-A_36 | ||
| 37 | 37 | ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. | Anx-A_37 | ||
| 38 | 38 | N) Without using admixture, plasticiser | Anx-A_38 | ||
| 39 | 39 | b) M20 grade concrete or Prop. 1:1.5:3 | Anx-A_39 | 38.12 | Cum |
| 40 | 40 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. | Anx-A_40 | ||
| 41 | 41 | (I) In Sub-structure upto plinth level including dewatering if necessary | Anx-A_41 | ||
| 42 | 42 | (b) In proportion 1:4. | Anx-A_42 | 15.5 | Cum |
| 43 | 43 | Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. | Anx-A_43 | 21.61 | Sqm |
| 44 | 44 | PRE CONSTRUCTION ANTI - TERMITE TREATMENT | Anx-A_44 | ||
| 45 | 45 | Pre construction anti - termite treatment in the back fill in immediate contact with the foundation structure after completion, column, wall etc. to a depth of 450mm and width 300mm (when required refill in 200mm thick layers) applying the emulsion @ 5 (five) litres per square meter towards the concrete and masonry walls so as to ensure earth in contact with the structure well treated - with chemical (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. | Anx-A_45 | ||
| 46 | 46 | a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. | Anx-A_46 | 115 | Sqm |
| 47 | 47 | Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. | Anx-A_47 | ||
| 48 | 48 | (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading. | Anx-A_48 | 69 | Cum |
| 49 | 49 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) | Anx-A_49 | ||
| 50 | 50 | (A) 112mm thick brick wall | Anx-A_50 | ||
| 51 | 51 | (a) In cement mortar in proportion 1:4. \n(1 cement:4 sand) | Anx-A_51 | 246.21 | Sqm |
| 52 | 52 | Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. | Anx-A_52 | ||
| 53 | 53 | (a) With sal wood | Anx-A_53 | 0.37 | Cum |
| 54 | 54 | DOORS / WINDOWS / VENTILATORS / CLERESTORY WINDOWS | Anx-A_54 | ||
| 55 | 55 | Providing, fitting and fixing factory made wooden panelled doors with panel inserts of 75mm to 50mm width and 12mm to 20mm thickness,joined together with continous tongue and groove joints glued together with Movicol or other approved adhesive leaving a vertical groove of 7.5mm to 15mm between the inserts,the edges of panel inserts being feather tongue into styles and rails including providing three pairs of oxidised M.S butt hinges (100mm x75 mm x3.55mm) and furnishing with moulded timber beading of size 25mmx15mm around the panels complete as per drawing (moulded timber bead and all fittings except hinges to be paid separately) | Anx-A_55 | ||
| 56 | 56 | B) With 1st class local wood \n(Gamari/Hollock/Bonsum ) | Anx-A_56 | ||
| 57 | 57 | (ii) 35 mm thick. | Anx-A_57 | 12.6 | Sq.m. |
| 58 | 58 | Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels. | Anx-A_58 | ||
| 59 | 59 | (a)2 Track sliding window | Anx-A_59 | ||
| 60 | 60 | (i)6mm clear glass | Anx-A_60 | 27 | Sqm |
| 61 | 61 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. | Anx-A_61 | ||
| 62 | 62 | A) On rough side | Anx-A_62 | ||
| 63 | 63 | b) In cement mortar 1:4 | Anx-A_63 | 607.42 | Sqm |
| 64 | 64 | Plain cement concrete floor base in prop 1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. | Anx-A_64 | ||
| 65 | 65 | a) 35mm thick | Anx-A_65 | 115 | Sqm |
| 66 | 66 | Providing Ceramic Tiles of approved quality, size, shape and thickness not less than 8 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with fix-A Tile Choksey/ Sika/ Pedelite/ Rouf/ White cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed (coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). | Anx-A_66 | ||
| 67 | 67 | Normal range \nSomany/ Orient/Nitco /Asian Make | Anx-A_67 | ||
| 68 | 68 | Of size 300mmx300mm and above | Anx-A_68 | 38.16 | Sq.m |
| 69 | 69 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) | Anx-A_69 | ||
| 70 | 70 | a) Normal range \nSomany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make | Anx-A_70 | ||
| 71 | 71 | ii) Of size 600mmx600mm and above | Anx-A_71 | 115 | Sq.m |
| 72 | 72 | Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified. | Anx-A_72 | ||
| 73 | 73 | (b) Other than Guwahati city | Anx-A_73 | 273 | Cum |
| 74 | 74 | Extra for providing and mixing Integral waterproofing compounds like Master Proof IWP-1 of Choksey Chemicals /Dr. Sealkit No.1 (Asian Chemicals)/ RHEOMAC 707 of BASF @ 0.2% by weight of cement for waterproofing structures like roof slabs, basement, sunken slabs, chajjas, tunnels, water tank etc. as specified and directed by the Department complete at all levels. | Anx-A_74 | ||
| 75 | 75 | A. In concrete of proportion: | Anx-A_75 | ||
| 76 | 76 | (iii) 1 : 1 : 2 (1cement : 1coarse sand : 2aggregate) or M-25 grade. | Anx-A_76 | 115 | Cum |
| 77 | 77 | PLASTER OF PARIS & WALL PUTTY | Anx-A_77 | ||
| 78 | 78 | Providing surface preparation for walls, celling etc.using average 1.50 mm thick plaster of paris including clearing, rubbing with sand paper, filling gaps, depression etc. where necessary, with chalk powder and and plaster of paris paste, making the surface even and smooth complete at all levels as specified and directed. | Anx-A_78 | 722.42 | Sqm |
| 79 | 79 | Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) | Anx-A_79 | ||
| 80 | 80 | (i) Thickness = 1.5 mm thick | Anx-A_80 | 722.42 | Sqm |
| 81 | 81 | WALL PAINTING | Anx-A_81 | ||
| 82 | 82 | Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. | Anx-A_82 | ||
| 83 | 83 | (a).Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) | Anx-A_83 | 722.42 | Sqm |
| 84 | 84 | Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. | Anx-A_84 | ||
| 85 | 85 | (b). With ready mixed paint , wood primer (white). | Anx-A_85 | 105.15 | Sqm |
| 86 | 86 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. | Anx-A_86 | ||
| 87 | 87 | (i).Surfaces over 100mm in width or girth. | Anx-A_87 | ||
| 88 | 88 | a). General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | Anx-A_88 | 105.15 | Sqm |
| 89 | 89 | Providing drain with cement concrete (1:3:6) 10cm thick sides 10cm thick bed over brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. | Anx-A_89 | ||
| 90 | 90 | ii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm. | Anx-A_90 | 61.3 | Rm |
| 91 | 91 | ALUMINIUM FITTINGS | Anx-A_91 | ||
| 92 | 92 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) | Anx-A_92 | ||
| 93 | 93 | a) Sliding door bolts | Anx-A_93 | ||
| 94 | 94 | ii) 250mm x 16mm | Anx-A_94 | 12 | Each |
| 95 | 95 | b) Tower bolts | Anx-A_95 | ||
| 96 | 96 | ii) 250mm x 12mm | Anx-A_96 | 24 | Each |
| 97 | 97 | Providing plinth protection with bricks flat laid in cement mortar 1: 4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish. | Anx-A_97 | 42.91 | Sqm |
| 98 | 98 | WATER SUPPLY & SANITARY WORKS | Anx-B_1 | ||
| 99 | 99 | INDIAN TYPE WATER CLOSET | Anx-B_2 | ||
| 100 | 100 | Indian type Orissa pattern of size 500mm | Anx-B_3 | ||
| 101 | 101 | a) White | Anx-B_4 | ||
| 102 | 102 | ii) Hindware make | Anx-B_5 | 2 | Each |
| 103 | 103 | Providing fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader and brass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. | Anx-B_6 | ||
| 104 | 104 | (A) Parryware Make | Anx-B_7 | ||
| 105 | 105 | (a) White | Anx-B_8 | ||
| 106 | 106 | (ii) Aquaseal (Cat. No.C0508) | Anx-B_9 | 4 | Each |
| 107 | 107 | Providing vitreous China washbasin with CI/MS brackets, C.P brass chain with plug, PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) | Anx-B_10 | ||
| 108 | 108 | PEDESTAL BASIN (with pedestal) | Anx-B_11 | ||
| 109 | 109 | (B) Hindware Make | Anx-B_12 | ||
| 110 | 110 | (a) White | Anx-B_13 | ||
| 111 | 111 | (i) CEDER 570 x 440 (Cat. No.91049/91115) | Anx-B_14 | 2 | Each |
| 112 | 112 | Providing fitting and fixing Decorative Mirror complete as directed and specified. | Anx-B_15 | ||
| 113 | 113 | (b) size 600mmx450mm | Anx-B_16 | 2 | Each |
| 114 | 114 | Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified. | Anx-B_17 | ||
| 115 | 115 | (a) Continental (Cat.No.ACN-1331N) | Anx-B_18 | 2 | Each |
| 116 | 116 | Providing, fitting and fixing Chrome Plated towel ring complete as directed and specified. | Anx-B_19 | ||
| 117 | 117 | (ii) Continental towel ring round (Cat.No. ACN-1121BN) | Anx-B_20 | 2 | Each |
| 118 | 118 | Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) | Anx-B_21 | ||
| 119 | 119 | (a) White | Anx-B_22 | ||
| 120 | 120 | (i) Economy Single Flush (Cat No.C8090/C8055) | Anx-B_23 | 2 | Each |
| 121 | 121 | PVC PIPES, BENDS, JUNCTIONS, TEES ETC. | Anx-B_24 | ||
| 122 | 122 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining, fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. | Anx-B_25 | ||
| 123 | 123 | a) In exposed surfaces or in trenches. | Anx-B_26 | ||
| 124 | 124 | (ii) 110mm dia. | Anx-B_27 | 60 | Rm |
| 125 | 125 | (vi) 50mm dia | Anx-B_28 | 20 | Rm |
| 126 | 126 | Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. | Anx-B_29 | ||
| 127 | 127 | a) In exposed surfaces or in trenches. | Anx-B_30 | ||
| 128 | 128 | (ii) 110mm dia. | Anx-B_31 | 3 | Each |
| 129 | 129 | (v) 50mm dia | Anx-B_32 | 2 | Each |
| 130 | 130 | Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. | Anx-B_33 | ||
| 131 | 131 | a) In exposed surfaces or in trenches. | Anx-B_34 | ||
| 132 | 132 | (ii) 110mm dia. | Anx-B_35 | 5 | Each |
| 133 | 133 | (v) 50mm dia | Anx-B_36 | 2 | Each |
| 134 | 134 | Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. | Anx-B_37 | ||
| 135 | 135 | (iv) 75mm dia. PVC cowel of ISI make | Anx-B_38 | 1 | Each |
| 136 | 136 | Providing fitting and fixing vitreous china squatting plate urinal with automatic flushing cistern with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. | Anx-B_39 | ||
| 137 | 137 | (A) Parryware Make | Anx-B_40 | ||
| 138 | 138 | (i) White (Cat. No. C0503) | Anx-B_41 | 4 | Each |
| 139 | 139 | PIPING | Anx-B_42 | ||
| 140 | 140 | Supplying fitting and fixing G.I. Pipes of following sizes, with all necessary 'R' brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc.complete at all levels including below G.L. as directed and specified. | Anx-B_43 | ||
| 141 | 141 | c) 32 mm dia (Medium) | Anx-B_44 | ||
| 142 | 142 | i) Using Tata make | Anx-B_45 | 50 | RM |
| 143 | 143 | f) 15 mm dia (Medium) | Anx-B_46 | ||
| 144 | 144 | i) Using Tata make | Anx-B_47 | 120 | RM |
| 145 | 145 | BIB COCK | Anx-B_48 | ||
| 146 | 146 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand as directed and specified. (G.I. & C.P pipes will be measured separately) | Anx-B_49 | ||
| 147 | 147 | Essco make (Delux/Sumthing spl./Tropical) | Anx-B_50 | ||
| 148 | 148 | (a) Bib cock short body | Anx-B_51 | 6 | Each |
| 149 | 149 | STOP COCK | Anx-B_52 | ||
| 150 | 150 | Supplying fitting and fixing stop-cock of approved brand of size as mentioned below and directed and specified (G.I. & C.P. pipes will be measured and paid separately) | Anx-B_53 | ||
| 151 | 151 | I) Brass stop cock (heavy) of Sant make | Anx-B_54 | ||
| 152 | 152 | (iv)32mm dia | Anx-B_55 | 1 | Each |
| 153 | 153 | PUSH BIB COCK | Anx-B_56 | ||
| 154 | 154 | Supplying fitting and fixing push bib cock 15mm dia complete as directed and specified as follows. (pipes will be measured and paid separately). | Anx-B_57 | ||
| 155 | 155 | a) C.P.C.H. | Anx-B_58 | ||
| 156 | 156 | (b) Heavy type | Anx-B_59 | 4 | Each |
| 157 | 157 | Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table. | Anx-B_60 | 6 | Cum |
| 158 | 158 | Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed. | Anx-B_61 | 2 | Each |
| 159 | 159 | INTERNAL WIRING | Anx-C_1 | ||
| 160 | 160 | Wiring for light/fan/ call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) system, complete. | Anx-C_2 | ||
| 161 | 161 | Short point up to 3.00 metre. length. | Anx-C_3 | 6 | Each |
| 162 | 162 | Medium point up to 6.00 metre. Length. | Anx-C_4 | 20 | Each |
| 163 | 163 | Long point up to 10.00 metre. Length. | Anx-C_5 | 20 | Each |
| 164 | 164 | Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) system including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete. | Anx-C_6 | ||
| 165 | 165 | Short point up to 3.00 metre. length. | Anx-C_7 | 4 | Each |
| 166 | 166 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface flat ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) system including earth continuity. | Anx-C_8 | ||
| 167 | 167 | With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in flat 19 mm ISI marked casing 'n' capping system. | Anx-C_9 | 100 | Metre. |
| 168 | 168 | With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in flat 19 mm ISI marked casing 'n' capping system. | Anx-C_10 | 50 | Metre. |
| 169 | 169 | B.SWITCH SOCKETS | Anx-C_11 | ||
| 170 | 170 | Supplying with fitting fixing of 6 amp one way modular clip in switch, MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department. | Anx-C_12 | 50 | Each |
| 171 | 171 | Supplying with fitting fixing of blank plate single in modular switch system , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | Anx-C_13 | 12 | Each |
| 172 | 172 | Supplying including installation of socket outlet 10 Amps 3 pin combine shuttered complete , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | Anx-C_14 | 4 | Each |
| 173 | 173 | Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in surface/ recessed system complete as per direction of department. | Anx-C_15 | ||
| 174 | 174 | 4 module type Metal | Anx-C_16 | 2 | Each |
| 175 | 175 | 12 module type Metal | Anx-C_17 | 2 | Each |
| 176 | 176 | 18 module type Metal | Anx-C_18 | 2 | Each |
| 177 | 177 | Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. | Anx-C_19 | ||
| 178 | 178 | 4 module | Anx-C_20 | 2 | Each |
| 179 | 179 | 12 module | Anx-C_21 | 2 | Each |
| 180 | 180 | 18 module | Anx-C_22 | 2 | Each |
| 181 | 181 | Supplying with fitting and fixing of electronic modular fan speed controller 2 - module type MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department. | Anx-C_23 | ||
| 182 | 182 | 100 watt electronic modular 4 step speed control 2 - module type | Anx-C_24 | 11 | Each |
| 183 | 183 | C.FITTING AND FIXTURES | Anx-C_25 | ||
| 184 | 184 | Supplying and fixing of batten holder including 11 W CFL lamp and connection as approved by the Deptt.)as required. | Anx-C_26 | 15 | Each |
| 185 | 185 | Ultra Slim T5 luminaries and Electronic ballast with 1 X 28 W T5 lamp(Crompton Greaves make Model- T5LO1128 LITE LINE/ Sleek and Ultra light extruded metal T5 luminaries and Electronic ballast with 1 X 28 W T5 lamp (Crompton Greaves make Model- T5LN28 LITE n SLIM or equivalent (Equivalent will be selected by the deptt considering the mother items rate) (equivalent PHILIPS/ WIPRO/ BAJAJ/ Havells/ HPL/ SOLAR/ JAQUAR make).\n | Anx-C_27 | 18 | Each |
| 186 | 186 | Supplying including fitting fixing of following star rated A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection cable, as approved by the Deptt.s etc. as required complete and as directed by the Department [Without regulator]. (ORIENT PSPO make / Usha make/ CROMPTON make/ Havells/ ATC/ V GAURD make) | Anx-C_28 | ||
| 187 | 187 | Energy efficient 5-star 1200 mm sweep Fusion 5 star (Havells or equivalent make) | Anx-C_29 | 11 | Each |
| 188 | 188 | Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department. | Anx-C_30 | ||
| 189 | 189 | Domestic | Anx-C_31 | ||
| 190 | 190 | High Speed 225 mm sweep (ORIENT make), Trans Air 225 mm sweep (Crompton make), Ventil Air DX 250 mm sweep Louver type (Havells make) | Anx-C_32 | 3 | Each |
| 191 | 191 | D.DISTRIBUTION | Anx-C_33 | ||
| 192 | 192 | Supplying including fitting and fixing bus bar chamber ( HPL/ GECO / or equivalent make) with 4 strips bus bar of length 350/450/600/900 mm made of aluminium alloy or wrought aluminium suitable for 100 amp capacity complete with all accessories including connection etc. as required complete | Anx-C_34 | 1 | Each |
| 193 | 193 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. | Anx-C_35 | ||
| 194 | 194 | ABB, Schneider MG, legrand, Hager make) | Anx-C_36 | ||
| 195 | 195 | 8 way SPN double door | Anx-C_37 | 1 | Each |
| 196 | 196 | Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. | Anx-C_38 | ||
| 197 | 197 | B Series\n(Schneider MG, legrand, Hager make) | Anx-C_39 | ||
| 198 | 198 | 6 to 32A | Anx-C_40 | 6 | Each |
| 199 | 199 | Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. | Anx-C_41 | ||
| 200 | 200 | B Series\n(ABB, Schneider MG, legrand, Hager make) | Anx-C_42 | ||
| 201 | 201 | 6 to 32A | Anx-C_43 | 1 | Each |
| 202 | 202 | E.EARTHING | Anx-C_44 | ||
| 203 | 203 | Supply with installation & commissioning of readymade maintenance free CPRI approved technology G.I. CHEMRODE ELECTRODE complete with RESLOW Grounding Minerals (25 K and Advance Earth Pit cover (PV including excavation of earth pit and construction brick earth chamber including plastering both inner & outer surface of brick wall as specified and directed by the deptt. | Anx-C_45 | 2 | Each |
| 204 | 204 | Extra for using salt (5 K and Charcoal (64 K in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt. | Anx-C_46 | 2 | Each |
| 205 | 205 | Extra for using salt (5 K and Charcoal (96 K in G.I./Copper plate Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the deptt . | Anx-C_47 | 2 | Each |
| 206 | 206 | Supplying & laying of 8 SWG Copper. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt. | Anx-C_48 | 30 | Metre. |
| 207 | 207 | Supply and drawing of earth continuity with 1.50 SQ mm single core flame retardant low smoke PVC insulated multistrand twisted copper cable (Green colour in the existing PVC conduits including making necessary connection as approved, specified and directed by the deptt. | Anx-C_49 | 95 | Each |
| 208 | 208 | F.UNDER GROUND CABLING AND TERMINATIONS | Anx-C_50 | ||
| 209 | 209 | Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . | Anx-C_51 | ||
| 210 | 210 | 4 Core A2XWY A2XFY | Anx-C_52 | ||
| 211 | 211 | 10.00 Sq. mm.4 Core armoured U.G. cable | Anx-C_53 | 38 | Metre |
| 212 | 212 | SUPPLYING FITTING AND FIXING OF (DOWELLS/ COMET make) DOUBLE compression BRASS GLANDS WITH NICKEL - PLATED | Anx-C_54 | ||
| 213 | 213 | WEATHERPROOF (CBW) Size: 23.5 - 26, 1- 1/4 \"\n | Anx-C_55 | 2 | Each |
| 214 | 214 | Construction of Proposed Computer Centre at Moirabari College, District Morigaon, Assam | Anx-D_1 | ||
| 215 | 215 | CIVIL WORKS | Anx-D_2 | ||
| 216 | 216 | EARTHWORK IN EXCAVATION | Anx-D_3 | ||
| 217 | 217 | Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. | Anx-D_4 | ||
| 218 | 218 | (A) Up to a depth of 2.00m below the existing ground level. | Anx-D_5 | ||
| 219 | 219 | (a) In ordinary soil | Anx-D_6 | 231.55 | Cum |
| 220 | 220 | Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. | Anx-D_7 | ||
| 221 | 221 | (a) Brick on flat soling. | Anx-D_8 | 536.5 | Sqm |
| 222 | 222 | PLAIN CEMENT CONCRETE WORKS | Anx-D_9 | ||
| 223 | 223 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). | Anx-D_10 | ||
| 224 | 224 | (b) In prop 1cement: 4 sand :8 coarse aggregate by volume | Anx-D_11 | 16.72 | Cum |
| 225 | 225 | REINFORCEMENT | Anx-D_12 | ||
| 226 | 226 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) | Anx-D_13 | ||
| 227 | 227 | a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL | Anx-D_14 | ||
| 228 | 228 | (ii)Super Ductile (SD) TMT reinforcement bars | Anx-D_15 | 332.05 | Qtl |
| 229 | 229 | TIMBER SHUTTERING (FORMWORK) | Anx-D_16 | ||
| 230 | 230 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: | Anx-D_17 | ||
| 231 | 231 | Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. | Anx-D_18 | ||
| 232 | 232 | (b) Using 25mm thick plank | Anx-D_19 | 60.48 | Sqm |
| 233 | 233 | Columns, Pillars, Posts & Strut | Anx-D_20 | ||
| 234 | 234 | (a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face | Anx-D_21 | ||
| 235 | 235 | (ii) Using 25mm thick plank | Anx-D_22 | 295.68 | Sqm |
| 236 | 236 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. | Anx-D_23 | ||
| 237 | 237 | (a) For depth not exceeding 1.0M. | Anx-D_24 | ||
| 238 | 238 | (i) Using 25mm thick plank | Anx-D_25 | 185.4 | Sqm |
| 239 | 239 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. | Anx-D_26 | ||
| 240 | 240 | (a) Floors etc. upto 200mm in thickness. | Anx-D_27 | ||
| 241 | 241 | (i) Using 325mm thick plank | Anx-D_28 | 811.25 | Sqm |
| 242 | 242 | Staircase with sloping or stepped soffits including risers and stringers but excluding Landing. (Using 38mm thick plank) | Anx-D_29 | 31.62 | Sqm |
| 243 | 243 | REINFORCED CEMENT CONCRETE WORKS | Anx-D_30 | ||
| 244 | 244 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) | Anx-D_31 | ||
| 245 | 245 | (I) Using Mixer Machine | Anx-D_32 | ||
| 246 | 246 | (A) In substructure up to plinth level | Anx-D_33 | ||
| 247 | 247 | Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. | Anx-D_34 | ||
| 248 | 248 | N) Without using admixture, plasticiser | Anx-D_35 | ||
| 249 | 249 | b) M20 grade concrete or Prop. 1:1.5:3 | Anx-D_36 | 28.82 | Cum |
| 250 | 250 | (B) In super structure from plinth level up to 1st floor level. | Anx-D_37 | ||
| 251 | 251 | ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. | Anx-D_38 | ||
| 252 | 252 | N) Without using admixture, plasticiser | Anx-D_39 | ||
| 253 | 253 | b) M20 grade concrete or Prop. 1:1.5:3 | Anx-D_40 | 163.61 | Cum |
| 254 | 254 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. | Anx-D_41 | ||
| 255 | 255 | (I) In Sub-structure upto plinth level including dewatering if necessary | Anx-D_42 | ||
| 256 | 256 | (b) In proportion 1:4. | Anx-D_43 | 19.84 | Cum |
| 257 | 257 | Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. | Anx-D_44 | 33.1 | Sqm |
| 258 | 258 | Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. | Anx-D_45 | ||
| 259 | 259 | (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading. | Anx-D_46 | 218.02 | Cum |
| 260 | 260 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) | Anx-D_47 | ||
| 261 | 261 | (A) 112mm thick brick wall | Anx-D_48 | ||
| 262 | 262 | (a) In cement mortar in proportion 1:4. \n(1 cement:4 sand) | Anx-D_49 | 594.79 | Sqm |
| 263 | 263 | DOORS / WINDOWS / VENTILATORS / CLERESTORY WINDOWS | Anx-D_50 | ||
| 264 | 264 | Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. | Anx-D_51 | ||
| 265 | 265 | (b) With 1st class timber (Bonsum/ Sundi) | Anx-D_52 | 0.6 | Cum |
| 266 | 266 | Providing fitting and fixing 1/3 panelled 2/3 glazed wooden shutters for doors/windows including oxidised iron butt hinges (100mm x75 mm x3.55 mm) with necessay screws including glass panes (other fittings to be measured and paid separately) | Anx-D_53 | ||
| 267 | 267 | B) With 1st class local wood \n(Gamari/Hollock/Bonsum ) | Anx-D_54 | ||
| 268 | 268 | (iii) 30 mm thick. | Anx-D_55 | 46.2 | Sq.m. |
| 269 | 269 | Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels. | Anx-D_56 | ||
| 270 | 270 | (a)2 Track sliding window | Anx-D_57 | ||
| 271 | 271 | (ii)5mm frosted glass | Anx-D_58 | 75.6 | Sqm |
| 272 | 272 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. | Anx-D_59 | ||
| 273 | 273 | A) On rough side | Anx-D_60 | ||
| 274 | 274 | b) In cement mortar 1:4 | Anx-D_61 | 1652.44 | Sqm |
| 275 | 275 | 65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 25mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg. per square metre of floor area) including curing etc. complete as directed. | Anx-D_62 | 363.4 | Sq.m |
| 276 | 276 | 25 mm thick cement concrete topping 1:2:4 (1cement : 2 coarse sand : 4 coarse aggregate of 12 mm nominal size) finished with a floating coat of neat cement finish to be laid in panels including curing complete as directed. | Anx-D_63 | 363.4 | Sq.m |
| 277 | 277 | Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) | Anx-D_64 | ||
| 278 | 278 | (ii) Thickness = 1.0mm thick | Anx-D_65 | 1552.97 | Sqm |
| 279 | 279 | CEMENT PAINT & PRIMER | Anx-D_66 | ||
| 280 | 280 | b) Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials. | Anx-D_67 | 826.22 | Sqm |
| 281 | 281 | ALUMINIUM FITTINGS | Anx-D_68 | ||
| 282 | 282 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. (anodised to bright natural matt & satin finished) | Anx-D_69 | ||
| 283 | 283 | a) Sliding door bolts | Anx-D_70 | ||
| 284 | 284 | ii) 250mm x 16mm | Anx-D_71 | 22 | Each |
| 285 | 285 | ii) 250mm x 12mm | Anx-D_72 | 52 | Each |
| 286 | 286 | Sanitary | Anx-E_1 | ||
| 287 | 287 | Providing fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately) | Anx-E_2 | ||
| 288 | 288 | Indian type Orissa pattern of size 500mm | Anx-E_3 | ||
| 289 | 289 | a) White | Anx-E_4 | ||
| 290 | 290 | ii) Hindware make | Anx-E_5 | 1 | Each |
| 291 | 291 | Providing fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. | Anx-E_6 | ||
| 292 | 292 | a) White | Anx-E_7 | ||
| 293 | 293 | (ii) Aquaseal (Cat. No.C0508) | Anx-E_8 | 2 | Each |
| 294 | 294 | Providing fitting and fixing vitreous china squatting plate urinal with automatic flushing cistern with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. | Anx-E_9 | ||
| 295 | 295 | (A) Parryware Make | Anx-E_10 | ||
| 296 | 296 | (i) White (Cat. No. C0503) | Anx-E_11 | 4 | Each |
| 297 | 297 | Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) | Anx-E_12 | ||
| 298 | 298 | PEDESTAL BASIN (with pedestal) | Anx-E_13 | ||
| 299 | 299 | (a) White | Anx-E_14 | ||
| 300 | 300 | (i) CEDER 570 x 440 (Cat. No.91049/91115) | Anx-E_15 | 2 | Each |
| 301 | 301 | Providing fitting and fixing Decorative Mirror complete as directed and specified. | Anx-E_16 | ||
| 302 | 302 | (A) Parryware Make | Anx-E_17 | ||
| 303 | 303 | (b) Size 600mm x 450mm | Anx-E_18 | 2 | each |
| 304 | 304 | Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified. | Anx-E_19 | ||
| 305 | 305 | (i) Jaquar Make | Anx-E_20 | ||
| 306 | 306 | (a) Continental (Cat.No.ACN-1331N) | Anx-E_21 | 2 | each |
| 307 | 307 | Providing, fitting and fixing Chrome Plated towel ring complete as directed and specified. | Anx-E_22 | ||
| 308 | 308 | (a) Jaquar make | Anx-E_23 | ||
| 309 | 309 | (ii) Continental towel ring round (Cat.No. ACN-1121BN) | Anx-E_24 | 2 | each |
| 310 | 310 | PVC PIPES, BENDS, JUNCTIONS, TEES ETC. | Anx-E_25 | ||
| 311 | 311 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. | Anx-E_26 | ||
| 312 | 312 | a) In exposed surfaces or in trenches. | Anx-E_27 | ||
| 313 | 313 | (ii) 110mm dia. | Anx-E_28 | 12 | Rm |
| 314 | 314 | Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. | Anx-E_29 | ||
| 315 | 315 | a) In exposed surfaces or in trenches. | Anx-E_30 | ||
| 316 | 316 | (ii) 110mm dia. | Anx-E_31 | 4 | each |
| 317 | 317 | Computer Center, Internal Wiring | Anx-F_1 | ||
| 318 | 318 | Wiring for light/fan/ call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) system, complete. | Anx-F_2 | ||
| 319 | 319 | Short point up to 3.00 metre. length. | Anx-F_3 | 6 | Each |
| 320 | 320 | Medium point up to 6.00 metre. Length. | Anx-F_4 | 40 | Each |
| 321 | 321 | Long point up to 10.00 metre. Length. | Anx-F_5 | 11 | Each |
| 322 | 322 | Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in surface flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete. | Anx-F_6 | ||
| 323 | 323 | Short point up to 3.00 mtr. length. | Anx-F_7 | 5 | Each |
| 324 | 324 | Medium point up to 6.00 metre. Length. | Anx-F_8 | 10 | Each |
| 325 | 325 | Long point up to 10.00 metre. Length. | Anx-F_9 | 10 | Each |
| 326 | 326 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface flat ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) system including earth continuity. | Anx-F_10 | ||
| 327 | 327 | With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in flat 19 mm ISI marked casing 'n' capping system. | Anx-F_11 | 100 | Metre. |
| 328 | 328 | Supply and fixing 32 mm mm dia 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) on surface system including painting etc as required: | Anx-F_12 | 20 | Metre |
| 329 | 329 | Supplying and fixing 18 S.W.G sheet steel metal boxes of the following sizes in surface Wiring system with suitable size of 3 mm thickness phenolic laminated sheet cover on the front face of the boxes including painting etc. as required and specified by the department. | Anx-F_13 | ||
| 330 | 330 | 200 mm x 250 mm x 60 mm deep (Nominal size | Anx-F_14 | 4 | Each |
| 331 | 331 | Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial flexible cable conforming to IS-694: 1990 with flexible bright annealed copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed ISI marked hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.) wiring system. | Anx-F_15 | ||
| 332 | 332 | With 3 x 6 sq. mm. + earth continuity with2x 4 sq. mm. cable in 25 mm. dia. ISI marked hot dip galvanised pipe s. | Anx-F_16 | 30 | Metre |
| 333 | 333 | B.SWITCH AND SOCKETS | Anx-F_17 | ||
| 334 | 334 | Supplying with fitting fixing of 6 amp one way modular clip in switch, MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department. | Anx-F_18 | 125 | Each |
| 335 | 335 | Supplying with fitting fixing of blank plate single in modular switch system , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | Anx-F_19 | 21 | Each |
| 336 | 336 | Supplying including installation of socket outlet 10 Amps 3 pin combine shuttered complete , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | Anx-F_20 | 82 | Each |
| 337 | 337 | Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in surface/ recessed system complete as per direction of department. | Anx-F_21 | ||
| 338 | 338 | 8 module type Metal | Anx-F_22 | 27 | Each |
| 339 | 339 | 12 module type Metal | Anx-F_23 | 6 | Each |
| 340 | 340 | 18 module type Metal | Anx-F_24 | 12 | Each |
| 341 | 341 | Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. | Anx-F_25 | ||
| 342 | 342 | 8 module | Anx-F_26 | 27 | Each |
| 343 | 343 | 12 module | Anx-F_27 | 6 | Each |
| 344 | 344 | 18 module | Anx-F_28 | 12 | Each |
| 345 | 345 | Supplying with fitting and fixing of electronic modular fan speed controller 2 - module type MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department. | Anx-F_29 | ||
| 346 | 346 | 100 Watt electronic modular 4 step speed control 2 - module type | Anx-F_30 | 33 | Each |
| 347 | 347 | FITTING AND FIXTURES | Anx-F_31 | ||
| 348 | 348 | Supplying and fixing of batten holder including 11 W CFL lamp and connection as approved by the Deptt.)as required. | Anx-F_32 | 20 | Each |
| 349 | 349 | Ultra Slim T5 luminaries and Electronic ballast with 1 X 28 W T5 lamp(Crompton Greaves make Model- T5LO1128 LITE LINE/ Sleek and Ultra light extruded metal T5 luminaries and Electronic ballast with 1 X 28 W T5 lamp (Crompton Greaves make Model- T5LN28 LITE n SLIM or equivalent (Equivalent will be selected by the deptt considering the mother items rate) (equivalent PHILIPS/ WIPRO/ BAJAJ/ Havells/ HPL/ SOLAR/ JAQUAR make).\n | Anx-F_33 | 24 | Each |
| 350 | 350 | Supplying including fitting fixing of following star rated A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection cable, as approved by the Deptt.s etc. as required complete and as directed by the Department [Without regulator]. (ORIENT PSPO make / Usha make/ CROMPTON make/ Havells/ ATC/ V GAURD make) | Anx-F_34 | ||
| 351 | 351 | Energy efficient 5-star 1200 mm sweep Fusion 5 star (Havells or equivalent make) | Anx-F_35 | 3 | Each |
| 352 | 352 | Supplying including fitting fixing of following star rated A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection cable, as approved by the Deptt.s etc. as required complete and as directed by the Department [Without regulator]. (ORIENT PSPO make / Usha make/ CROMPTON make/ Havells/ ATC/ V GAURD make) | Anx-F_36 | ||
| 353 | 353 | Energy efficient 5-star 1200 mm sweep Fusion 5 star (Havells or equivalent make) | Anx-F_37 | 3 | Each |
| 354 | 354 | DISTRIBUTION | Anx-F_38 | ||
| 355 | 355 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. | Anx-F_39 | ||
| 356 | 356 | ABB, Schneider MG, legrand, Hager make) | Anx-F_40 | ||
| 357 | 357 | 4 way TPN (4+12) double door | Anx-F_41 | 2 | Each |
| 358 | 358 | Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. | Anx-F_42 | ||
| 359 | 359 | B Series\n(Schneider MG, legrand, Hager make) | Anx-F_43 | ||
| 360 | 360 | 6 to 32A | Anx-F_44 | 24 | Each |
| 361 | 361 | Supplying with fitting and fixing TP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. | Anx-F_45 | ||
| 362 | 362 | B Series\n(Schneider MG, legrand, Hager make) | Anx-F_46 | ||
| 363 | 363 | 40A | Anx-F_47 | 4 | Each |
| 364 | 364 | EARTHING | Anx-F_48 | ||
| 365 | 365 | Supplying & laying of 8 SWG Copper. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt. | Anx-F_49 | 25 | Metre. |
| 366 | 366 | Supply and drawing of earth continuity with 1.50 SQ mm single core flame retardant low smoke PVC insulated multistrand twisted copper cable (Green colour in the existing PVC conduits including making necessary connection as approved, specified and directed by the deptt. | Anx-F_50 | 103 | Each |
| 367 | 367 | UNDER GROUND CABLING AND TERMINATIONS | Anx-F_51 | ||
| 368 | 368 | Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . | Anx-F_52 | ||
| 369 | 369 | 4 Core A2XWY A2XFY | Anx-F_53 | ||
| 370 | 370 | 10.00 Sq. mm.4 Core armoured U.G. cable | Anx-F_54 | 50 | Metre |
| 371 | 371 | SUPPLYING FITTING AND FIXING OF (DOWELLS/ COMET make) DOUBLE compression BRASS GLANDS WITH NICKEL - PLATED | Anx-F_55 | ||
| 372 | 372 | WEATHERPROOF (CBW) Size: 23.5 - 26, 1- 1/4 \"\n | Anx-F_56 | 2 | Each |
AI Tender Summary
Tender Timeline
Jan 21, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 06, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 10, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender