Repair And Renovation Of Biju Patnaik Park Corporation Road Brahmapur Works
Tender Value
40.04 Lakhs
Estimated cost
Bid Submission
04 Feb 2020
0 days left
EMD
40049
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Brahmapur → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair And Renovation Of Biju Patnaik Park Corporation Road Brahmapur Works
BOQ
| Name of Work: Repair and Renovation of Biju Patnaik park, Corporation Road, Brahmapur, Odisha (Civil & Electrical) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Civil work | BI01010001010000000000000515BI0100001112 | ||
| 2 | 1.01 | Labourcharges for taking out old settled concrete paver blocks from the pathway and relaying the same to proper camber and alignment in the pathway after preparing and compacting the bed etc. complete (old approved rate) | BI01010001010000000000000515BI0100001113 | 81.496 | sqm |
| 3 | 1.02 | Collecting, conveying, supplying and filling sand, watering, compacting and preparing the bed in the settled area of the pavement with cost, conveyance, royalty &taxes of all materials with labour, T&P etc. required for the work complete. | BI01010001010000000000000515BI0100001114 | 171.901 | cum |
| 4 | 1.03 | Supplying all materials, labour, T&P for providing cement concrete (1:4:8) with 4cm size crusher broken HBG metal with cost, conveyance, royalty of materials including watering, curing ramming etc., complete as per direction of EIC. | BI01010001010000000000000515BI0100001115 | 39.659 | cum |
| 5 | 1.04 | Providing and Laying Factory made Chamfered edge Cement Concreate Paver Blocks of required strengh, thickness & size/shape made by table Vibratory method to attain superior smoth finish using UP or Equivalent moulds, Laid in required gray colour and Pattern over 60mm thick Compacted bed of coarse sand, copmacting and proper embedding/ laying of interlocking Paver Blocks into the sand bedding layer throuth vibratory compaction by using plate vibrator, filing joints with Fine sand and cutting of Paver blocks as per required size/ pattern, linishing and sweeping extra sand in footpath, parks, lawns, drive ways, or light traffic parking and Lanes/Road etc, all complete as per Munufacturers Spectifications and Driection of Engg-in-Charge 60mm thick C.C. Paver Blocks of M-30 grade with approved colour design pattern etc. complete. | BI01010001010000000000000515BI0100001116 | 29.28 | sqm |
| 6 | 1.05 | First class Fly Ash Brick masonry using F.A. bricks of size 23 cm. x 11 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in foundation & plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge. | BI01010001010000000000000515BI0100001117 | 62.411 | cum |
| 7 | 1.06 | First class Fly Ash Brick masonry using F.A. bricks of size 23 cm. x 11 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge. | 30.92 | cum | |
| 8 | 1.07 | 12mm. thick cement plaster in cement mortar (1:6) for brick work. | 140.214 | sqm | |
| 9 | 1.08 | 16mm. thick cement plaster in cement mortar (1:6) for brick work. | 42.48 | sqm | |
| 10 | 1.09 | Providing, lifting, hoisting and laying Reinforced cement concrete of M-250 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Each Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips Each Not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and cost of all labours, sundries, T & P required of the work etc. complete in all respect as per specification and direction of Engineer-in-charge. | 10.948 | cum | |
| 11 | 1.1 | Providing, fixing and placing of Tor steel (HYSD) Fe-500 ,545 IS 1786-2008 for RCC work in all floors of required diameter of approved quality with straightening, Cutting, bending, binding welding or jointing if necessary, bending, binding, tying the grills as required for R.C.C. works, providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T & P and scaffolding complete in all respect as directed by the Engineer-in-Charge ( payment will be made according to the actual weight of M.S rod /Tor steel consumed in the work and Each Each No separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost. | 8.758 | qntl | |
| 12 | 1.11 | Providing & Applying priming one coat with water based Cement primer of approved brand and manufacture on plastered surface including cost, conveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T & P, scaffolding etc. required for the work and complete in all respect as per specification and direction of Engineer-in-charge. | 182.694 | sqm | |
| 13 | 1.12 | Wall painting two coats with 1st quality exterior grade weather coat paint of approved make to make an even finished surface in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labour, etc. complete as per specification and direction of Engineer-in-Charge. | 140.214 | sqm | |
| 14 | 1.13 | Wall Painting 2 coats to internal surface of walls with 1st quality Acryalic Emulsion paint (Plastic Emulsion Paint) over primer of approved brand and manufacturer to give an even shade as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete | 42.48 | sqm | |
| 15 | 1.14 | Fixing tiles (kota tile) in floors,treads of steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete . | 31.24 | sqm | |
| 16 | 1.15 | Fixing tiles (vitrified industrial tile) in floors,treads of steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete | 7.92 | sqm | |
| 17 | 1.16 | Earth work excavation in all kind of soil within initial lead of 50 m and initial lift of 1.5 m including rough dressing and leveling the bed...etc complete in all respect and as per the direction of Engineer-in-charge | 126.88 | cum | |
| 18 | 1.17 | Supply of good quality garden soil preferably red alluvial/sandy loam with texture neither too coarse nor too fine with a fair degree of water retaining capacity including cost, conveyance, royalties, taxes of the material, cost of all labour, T&P etc. as directed by engineer-in-charge complete. \nLifting & Spreading of soil uniformly over the surface area as per landscape design/advice of the site in charge including cost of labour, T&P, all taxes and royalties etc. complete as directed by engineer-in-charge | 542.26 | cum | |
| 19 | 1.18 | Supplying of approved good quality cow dung/ goat dung manure well decomposed garbage-free including loading, unloading and delivery at site with all leads and lifts including cost of all labour, T&P, all taxes and royalties etc. complete as directed by engineer-in-charge | 13.2 | cum | |
| 20 | 1.19 | Supplying fitting, fixing Fatory made single leaf rigid FRP sandwich composite Door/Window shutter (allternatly GRP) of 32 mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised isopathalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) mpregnate with orthopthalic polysterskin. The thickness of the skins shall not be less than 1.5 mm Expanded polystyone(EPS) structural foam panel of 29 mm thickness and a density of 20 kg/cu.mtr shall be used as core material. Wooded reinforcement made of seaoned sal wood block of cross section not less than 28mm x 32mm and also necessary sal wood reinfocements for fitting the metal fittings such as tower bolt, aldrop. hanles, etc. shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material. The material and process for manufacturing the door shutters shall be conform to RV- TIFAC composite design Center's standards and specifications and the door shutters tested in conforming to IS: 4020-1998. The finish door shutter will be plain colour as per specification and diection of Engineer-In-Charge. | 6.48 | sqm | |
| 21 | 1.2 | Supplying & fixing and fixing of M.S. rolling shutter of 16guage including all rollers, locking system & cover plate, screws as may be required etc with cost, conveyance, taxes of all materials, labour, T&P ete. required for the complete in all respect. | 237.6 | kg | |
| 22 | 1.21 | Priming one coat with any approved primer and Painting 2 coats to iron works with enamel paint of approved shade and quality including cost, conveyance, taxes of all materials, labour, T&P required for the work complete. | 15.84 | sqm | |
| 23 | 1.22 | Supplying, Fitting and fixing of Ceramic digiital wall tiles, walling for toilets and dados wherever required of size 300x 300mm of approved shade and make with application of polimer modified cement based water resistant adhesive bed of required thickness of 10mm and filling joints with epoxy grout of approved quality including cost of all materials, labour and T& P. | 63.018 | sqm | |
| 24 | 1.23 | Fixing tiles (ceramic ) in floors,treads of steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete. | 7.56 | sqm | |
| 25 | 1.24 | supplying fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size [email protected] c/c and stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design. | 21.2 | Rmt | |
| 26 | 1.25 | Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D- 1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete. 20mm dia | 5 | Rmt | |
| 27 | 1.26 | 25mm dia | 42 | Rmt | |
| 28 | 1.27 | 32mm dia | 5 | Rmt | |
| 29 | 1.28 | 15mm dia | 25 | Rmt | |
| 30 | 1.29 | Providing all materials, labour, T&P for fitting & fixing of following\nwater supply fittings confirming to IS-15778 with ISI mark as per\nASTM D-2846 & fixing with the pipes after cutting the pipes to\nrequired shape & size including wastage etc. of following nominal\ndiameter, all complete including testing the joints with required water pressure.The cost inclusive of all taxes,duties,transportation scaffolding etc. all complete as per specification and direction of Engineer-incharge 25mm dia brass/ gunmetal Fullway Valve | 2 | Each | |
| 31 | 1.3 | 32 mm dia brass/ gunmetal Fullway Valve | 1 | Each | |
| 32 | 1.31 | Providing all materials, labour,T&P and fittings and fixing of different\nwater supply (CP on Brass) fitting (Quarter Turn) as per IS\nspecification & approved make in all floor of following sizes and\nspecification with leak proof threaded joints with thread seal tape or any other method as required and directed including all taxes, duties, transportation etc., testing and rectification of defects after testing complete as per direction of Engineer-incharge.Make:Jaquar/Hindware/Cera 15mm dia Angle Stop cock with wall flange | 4 | Each | |
| 33 | 1.32 | 15mm dia Pillar cock | 2 | Each | |
| 34 | 1.33 | C.P. Soap Dish Holder | 2 | Each | |
| 35 | 1.34 | 600mm long towel railling | 2 | Each | |
| 36 | 1.35 | 32mm dia C.P.waste pipe | 4 | Each | |
| 37 | 1.36 | Providing and fixing 15mm dia CP Bib Cock long body | 2 | Each | |
| 38 | 1.37 | Stainless steel jali grating with hole of floor | 4 | Each | |
| 39 | 1.38 | Providing & fixing 10ltr capacity PVC low level flushing cistern with a pair of PVC brackets complete | 2 | Each | |
| 40 | 1.39 | Fixing wash basin with hole for Pillar taps confirming to IS 2556 : Part 4 -2004 with cast iron or MS brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification. (550x400) | 2 | Each | |
| 41 | 1.4 | Fixing standard sized glass-shelf with Chromium Plated brass brackets and guard rails complete ,fixed to woden plugs with Chromium Plated brass screws as per specification and direction of the Engineer-in-charge. | 2 | Each | |
| 42 | 1.41 | Fixing PVC inlet pipe of following nominal diameter for wash basin or sink including brass check nut complete as per specification | 4 | Each | |
| 43 | 1.42 | Fixing Rotational moulded Poly Propelene double layer cylindrical vertical water storage tanks confirming to IS 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fitting and providing extra sockets and jam nuts ,fixinf ball valve etc,including hosting upto a height of 5 mtr above ground level and placing the tank to the required postion etc all complete as per specification and direction of the Er-in-charge. | 1 | Each | |
| 44 | 1.43 | Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes | 18 | Rmt | |
| 45 | 1.44 | Providing and fixing glazed earthenware Squatting plate of size 600mm x 350 mm conferming to IS: 2556- part-6-1995 with integral longitudinal flushing pipe including embedding the plate in 25 mm cement mortar (1:8) lain over 150m cement concrete (1:4:8) using 40 mm hard granite metal all complete as per specification.Hindware Squating- Size 60x35x10 cm Starwhite. | 2 | Each | |
| 46 | 1.45 | Fixing Flat back Small urinal confirming to IS 2556: Part 6 -1996 including connecting the urinal of size 31.5x26.5x44 cm sizes respectively with wash pipe by means of white lead mixed with chopped hemp etc all complete as per specifications. | 2 | Each | |
| 47 | 1.46 | Supplying all materials, labour, T&P, fitting and fixing of following dia uPVC SWR (Ringfit) fittings of approved make confirming to IS-14735 with ISI mark with all taxes, duties, transportation & requisite testing as per specification & direction of EIC.\nMake:ASTRAL/ASHRIVAD/AJAYA/SUPREME 110mm dia Vent cowl | 2 | Each | |
| 48 | 1.47 | PVC Clamp Suitable for 110mm dia pipe | 12 | Each | |
| 49 | 1.48 | 110mm WC connector/Bend with lip ring | 4 | Each | |
| 50 | 1.49 | Supply and installation of Merino-Besco TITAN STANDARD series cubicles of width and depth as per specifications/ site drawings. Cubicle height will be 1980 mm when top rail of rectangular cross section is used. ITEM DESCRIPTION : Made from solid grade compact high pressure laminate as per IS:2046 and EN-438 manufactured under high specific pressure > 5 MPa and temperature >120°C with bunch of kraft papers impregnated with thermosetting phenolic resin and decorative papers made of Alpha cellulose fiber impregnated with thermosetting melamine resin which provide superior scratch, abrasion, heat, chemical, impact, graffiti & moisture resistance along with anti-bacterial properties. Panels have a black core that when machined, presents a distinctive black edge. \nDoors:\nAll doors will be of single colour and made of 12 mm thick Merino HPL compact panel. The doors will have chamfered edges. Each door will be supported by 3 stainless steel made hinges affixed to the pilasters. Stainless steel made coat hook and lock set are provided with each door. All the doors will be routered at the vertical ends and the rubber sponge lining will be incorporated at the routered ends.\nPilasters:\nAll pilasters will be made of 12 mm thick Merino HPL compact panel with chamfered edge and completed with stainless steel made thumb turn lock set. Pilasters will be anchored to the floor using stainless steel made adjustable legs . All pilasters will be routered at their vertical ends to facilitate closure of doors. The bottom gap is 100-150 mm.\nDesign no. as specified by Arch. / Engr. in suede finish. Size of panels to be as per drawing.\nDividers:\nAll intermediate partitions or dividers will be made of 12 mm thick Merino HPL compact laminate panels. They are affixed with stainless steel made U-channel at their ends for ultimate stability of the system. HARDWARE & ACCESSORIES \n• Top rail is made of stainless steel grade 304. There are two options for the top rail. First one comes with a rectangular cross section (Size to be 55mmx42mmx1.6 mmT) and the other one comes with circular cross section (Diameter 32 mm). Surface finish to be brush type. A thin plastic film pasted for surface protection. \n• Corner joinery section made from Stainless steel grade 304. Surface finish to be brush type. A thin plastic film pasted for surface protection. Size to be 35mmx15mmx0.8 mmT. \n• Wall joinery section with hamming profile made from Stainless steel grade 304. Surface finish to be brush type. A thin plastic film pasted for surface protection. Size to be 21mmx16mmx0.8 mmT. \n• Adjustable Pedestal Footing of base diameter 64 mm made from Stainless steel grade 316 giving a clearance height of 150 mm. Surface finish to be matt type.\n• Spring loaded Butt Hinges made from Stainless steel grade 304. Surface finish to be matt type. Covers to be lacor coated.\n• Coat hook with rubber stopper made from Stainless steel grade 304. Surface finish to be matt type.\n• Round Door knob diameter 30 mm with grooves for better hand grip made from Stainless steel grade 304. Surface finish to be matt type.\n• Rotating Thumb-turn locking system with privacy indicator made from Stainless steel grade 304. Surface finish to be matt type.\n• Anti-noise rubber padding of thickness 2 mm and width 10 mm\n• Stainless steel grade 304 screws. Titan Std Series Cubicles: Std Sizes (W x D x H): 900 mm x 1550 mm x 1980 mm( Height is including 150 mm gap from bottom) Door Size- 600 mm | 8 | Each | |
| 51 | 1.5 | Providing all materials, labour, T&P for fitting and fixing of following\nsize of 12mm thick toughened glass for urinal partition of approved\nmake in all floor with edge moulding & polishing with chromium plated brass screws, G/W brackets 90° (Double Sided Back Plate) of DORMA make with all taxes, duties, transportation etc. all complete as per specification & direction of Engineer-in-charge. Toughened glass partition of Size-1200mm ht. x 600mm | 1 | Each | |
| 52 | 1.51 | Supplying, and installation of floor standing Voltas RO & UV Purifier Water Cooler having purification capacity Up to 80L/hr, Inlet WaterStorage Capacity of 80Ltrs. DImentions 461x582x1441. RO+UV+Sediment+carbon. Material of Construction-outer panels stainless steel AUS J1 grade. 2 No. of taps for cold water. Compressor, Hermetically sealer, reciprocating compressor, Condenser- Propeller Fan. Refrigerant used R-134 A. Temperature Range-10- 25deg C, including cost, conveyance, taxes etc. complete as per manufacturer's specification or as directed by Engineer-in-Charge. | 1 | Each | |
| 53 | 1.52 | Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete R.C.C. floor, roof slab,landing,balconies,projecting sunshades and chajjas up to 4.3 mtr height | 20.175 | sqm | |
| 54 | 1.54 | R.C.C.foundation and plinth-band,footing,bases of column,mass concrete | 45.67 | sqm | |
| 55 | 1.55 | R.C.C.beams,columns,griders | 26.28 | sqm | |
| 56 | 1.56 | R.C.C.lintels | 30.765 | sqm | |
| 57 | 1.57 | 2.5cm thick artificial stone flooring with cement concrete (1:2:4) including punning using 12mm to 20mm gauge hard granite chips. | 186 | sqm | |
| 58 | 1.58 | Supplying, fitting of 750mm dia razor wire conceertina coil with 6mt. (equivalent to 50 spirals) length coils clipped with two nos. of straight line razzor & fixing U shape m.s. angle ofsize 50x50x6mm providing in the distance of 2.5 mt. center to center and seven row of razor barbed tape and grouted on the wall and welded with afterdismantlling the required bricks work and fiingk the grilll with C.C. (1:2:2) in position spike grill for rigid fixing including all required scaffolding where ever necessary andcleaning the site and painting two coats over a coat of priming to M.S. angle with all cost of materials, labour, conveyance, royalities, taxes etc. complete as per the directionof E.I.C | 108 | Rmt | |
| 59 | 2 | Painting to grill, gates etc. | BI01010001010000000000000515BI0100001124 | ||
| 60 | 2.01 | Priming one coat with any approved primer and Painting 2 coats to iron works with enamel paint of approved shade and quality including cost, conveyance, taxes of all materials, labour, T&P required for the work complete. | 1594.91 | sqm | |
| 61 | 2.02 | Supplying all materials, labour, T&P for providing one coat of touch wood plish finish mixed with small quantity of black enamel paint over the granite stone masonry walls of the compound wall and main entrance gat structure including applying white enamel painting with brush to the joints etc. complete as per direction of the Engineer-in-charge. | 340 | sqm | |
| 62 | 2.03 | Supplying all material, labour, T&P for providing one coat of touch wood polish finish to the decorative wooden finish seating bnches and ot her decorative structures inside Biju Patnaik Park etc. complete as per the direction of the Engineer-in-charge.(rate as per old work .agreement no-24/f2,2013-14) (a) Benches with back rests.(rate as per old work .agreement no-24/f2,2013-14 | 5 | Each | |
| 63 | 2.04 | (b) Benches without back rests. | 11 | Each | |
| 64 | 2.05 | ( c) Wooden finish logs (Stools) | 4 | Each | |
| 65 | 2.06 | (d) Decorative small pump chamber near cascade point. | 1 | Each | |
| 66 | 2.07 | (e) Designd parapet railing of the walkway bridge near swan house. | 1 | Each | |
| 67 | 2.08 | (f) Designed parapet railing of the small walkway bridge near cascade. | 1 | Each | |
| 68 | 2.09 | Finishing exterior wall surfaces with 2 coats of weather seal coat painting with any approved shade with cost, conveyance & taxes of all materials, labour, T&P etc. required for the work complete | 1810.38 | sqm | |
| 69 | 2.1 | Scraping old paint with scrapers, sand papering and washing with soap water or soda including scaffolding charges etc. complete. | 1810.38 | sqm | |
| 70 | 2.11 | Priming one coat with any approved primer (Plastered Surface) with cost, conveyance & taxes of all materials, labour, T&P etc. required for the work complete | 1810.38 | sqm | |
| 71 | 2.12 | Colouring to Biju Patnaik Statue by spray painting after scraping the rubbish and old paint with scrapers, sand papering, washing the statue with soap water or soda including scaffolding charges with cost of all materials, paint, labour, T&P etc. required for the work complete.(provisinal rate) | 1 | job | |
| 72 | 3 | Repair of existing toilet block | |||
| 73 | 3.01 | Supplying all labour and T&P for earth work excavation in all kind of soil within 50 M initial lead and 1.5 M initial lift including rough dressing and leveling etc., in foundation and plinth as per direction of Engineer –in-charge. | 11.52 | cum | |
| 74 | 3.02 | Filling foundation and plinth with sand watering and ramming et. all complete as per direction of EIC. | 2.16 | cum | |
| 75 | 3.03 | Supplying all materials, labour, T&P for providing cement concrete (1:4:8) with 4cm size crusher broken HBG metal with cost, conveyance, royalty of materials including watering, curing ramming etc., complete as per direction of EIC. | 2.015 | cum | |
| 76 | 3.04 | Providing CC (1:1½:3) for RCC/PCC works using 12mm size CBHG chips.washed and screened sand with cost, conveyance, royalty of materials and including watering curing etc., complete and as per direction of Engineer-in-charge | 1.007 | cum | |
| 77 | 3.05 | Providing 12mm thick CP in CM 1:4 over brick work including watering and curing etc., complete as per direction of Engineer-in-charge. | 47.873 | sqm | |
| 78 | 3.06 | Fixing tiles (ceramic ) in floors,treads of steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete. | 18.749 | sqm | |
| 79 | 3.07 | Fixing Ceramic (Glazed) tiles in dados skirting and risers of steps on 12mm. thick cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete | 27 | sqm | |
| 80 | 3.08 | Removing old lime or cement plaster from walls including racking out joints 12mm. deep and removing the debries within 50mtr lead. | 30.9 | sqm | |
| 81 | 3.09 | Dismantling and removing old tiled flooring including removing the bese coarse and stacking the usefull materials for reuse and removing the debries within 50mtr lead. | 15.88 | sqm | |
| 82 | 3.1 | Supplyinjg and fixing to wall PVC pipe etc. as per P.H. specification.25mm dia PVC pipe (To join both delivery pipe) | 10.2 | mtr | |
| 83 | 3.11 | Supplyinjg and fixing to wall PVC pipe etc. as per P.H. specification.15mm dia PVC pipe (To join both delivery pipe) | 21.2 | mtr | |
| 84 | 3.12 | Cutting holes through existing brick walls.250mm thick wall | 10 | Each | |
| 85 | 3.13 | Supplying &Fixing 15mm dia c.p. bib cock.(long body) | 2 | Each | |
| 86 | 3.14 | Supplying & Fixing squatting pan (indian type)580 mm size | 5 | Each | |
| 87 | 3.15 | Supplying &Fixing 15mm dia x 450mm long PVC inlet connection pipe. | 10 | Each | |
| 88 | 3.16 | Supplying &Fixing 15mm dia c.p. brass angle stop cock | 1 | Each | |
| 89 | 3.17 | Supplying &Fixing 25mm gun metal check or non return valve | 6 | Each | |
| 90 | 3.18 | Supplying &Fixing UPVC bend 110mm | 10 | Each | |
| 91 | 3.19 | providing of unplasticised-pvc rain water pipes conforming to IS-13592 75mm dia | 12 | mtr | |
| 92 | 3.2 | Fixing Flat back Small urinal confirming to IS 2556: Part 6 -1996 including connecting the urinal of size 31.5x26.5x44 cm sizes respectively with wash pipe by means of white lead mixed with chopped hemp etc all complete as per specifications. | 5 | Each | |
| 93 | 3.21 | Fixing (Indian type W.C Pan) confirming to IS 2556: Part 3 -2004 duly embeded in cement concrete 1:4:8 using hard granite metal 4cm nominal size all complete as per specification. | 2 | Each | |
| 94 | 3.22 | Fixing PVC waste pipe of following nominal diameter for wash basin or sink including brass check nut complete as per specification | 2 | Each | |
| 95 | 3.23 | Fixing standard sized glass-shelf with Chromium Plated brass brackets and guard rails complete ,fixed to woden plugs with Chromium Plated brass screws as per specification and direction of the Engineer-in-charge. | 4 | Each | |
| 96 | 3.24 | Fixing wash basin with hole for Pillar taps confirming to IS 2556 : Part 4 -2004 with cast iron or MS brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification. (550x400) | 2 | Each | |
| 97 | 3.25 | Providing & fixing 10ltr capacity PVC low level flushing cistern with a pair of PVC brackets complete | 2 | Each | |
| 98 | 3.26 | Providing and fixing 15mm dia CP Regular Body Concealed Stop Cock. | 4 | Each | |
| 99 | 3.27 | Stainless steel jali grating with hole of floor / nahani trap | 6 | Each | |
| 100 | 3.28 | 40mm dia brass/ gunmetal Fullway Valve | 2 | Each | |
| 101 | 3.29 | Providing and fixing 15mm dia CP angular stop cock | 2 | Each | |
| 102 | 3.3 | Providing and fixing 15mm dia CP pillar Cock body | 2 | Each | |
| 103 | 3.31 | Providing and fixing CP brass Soap case | 2 | Each | |
| 104 | 3.32 | Supplying fitting, fixing Fatory made single leaf rigid FRP sandwich composite Door/Window shutter (allternatly GRP) of 32 mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised isopathalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) mpregnate with orthopthalic polysterskin. The thickness of the skins shall not be less than 1.5 mm Expanded polystyone(EPS) structural foam panel of 29 mm thickness and a density of 20 kg/cu.mtr shall be used as core material. Wooded reinforcement made of seaoned sal wood block of cross section not less than 28mm x 32mm and also necessary sal wood reinfocements for fitting the metal fittings such as tower bolt, aldrop. hanles, etc. shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material. The material and process for manufacturing the door shutters shall be conform to RV- TIFAC composite design Center's standards and specifications and the door shutters tested in conforming to IS: 4020-1998. The finish door shutter will be plain colour as per specification and diection of Engineer-In-Charge. | 7.2 | sqm | |
| 105 | 3.33 | Providing & Applying priming one coat with water based Cement primer of approved brand and manufacture on plastered surface including cost, conveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T & P, scaffolding etc. required for the work and complete in all respect as per specification and direction of Engineer-in-charge | 103.373 | sqm | |
| 106 | 3.34 | Wall painting two coats with 1st quality exterior grade weather coat paint of approved make to make an even finished surface in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labour, etc. complete as per specification and direction of Engineer-in-Charge. | 103.373 | sqm | |
| 107 | 3.35 | Wall painting two coats with Distemper paint of approved make to make an even finished surface in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labour, etc. complete as per specification and direction of Engineer-in-Charge. | 36.173 | sqm | |
| 108 | 4 | Electrical | |||
| 109 | 4.01 | Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC flexible conduit with 5A ,250V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size, MS box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard) Group-A -L.P- F.P- C.B.P- | 22 | Point | |
| 110 | 4.02 | Group-B L.P- F.P- C.B.P- | 22 | Point | |
| 111 | 4.03 | Group-C L.P- F.P- C.B.P- | 20 | Point | |
| 112 | 4.04 | Recessed extra lead submain wiring alongwith earth wire with the following sizes of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit 1.6 mm in surface /recessed PVC conduit as required (make of wire -Finolex/ L&T/ Anchor/Havells/V-Guard) exceeding to Group-C points in 2 X 1.5sqmm +1 x 1.5sqmm Recessed wiring to 5A /6Amp socket outlet with 2 X 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20mm dia non metallic PVC flexible conduit with piano type switch, Phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 X 1.5sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required (Make of wire -Finolex/ L&T/ Anchor/ Havells/V-Guard) Separate \n \n | 56 | Mtr. | |
| 113 | 4.05 | Recessed wiring to 5A /6Amp socket outlet with 2 X 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20mm dia non metallic PVC flexible conduit with piano type switch, Phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 X 1.5sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required (Make of wire -Finolex/ L&T/ Anchor/ Havells/V-Guard) Separate | 16 | Each | |
| 114 | 4.06 | Supply and fixing of 5Amp plug with switch on existing board (Piano type ) | 8 | Each | |
| 115 | 4.07 | Supply and fixing of metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing of 6pin 5/6 & 5/6Amp socket outlet and 5/6 Amp piano type switches connection painting etc. as required. (make-Anchor/ Cona) | 54 | Each | |
| 116 | 4.08 | Supply and fixing of metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing of 6pin 5/6 & 15/16Amp socket outlet and 15/16Amp piano type switches connection painting etc. as required. (make-Anchor/ Cona) | 10 | Each | |
| 117 | 4.09 | Recessed submain wiring alongwith earth wire with the following sizes of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit 1.6 mm in surface /recessed PVC conduit as required (make of wire -Finolex/L&T/Anchor/Havells/V-Guard) 2 X 2.5sq.mm +1 X 1.5sqmm | 25 | Mtr. | |
| 118 | 4.1 | 2 X 4sq.mm +1 X 1.5sqmm. | 12 | Mtr. | |
| 119 | 4.11 | 2 X 6sq.mm +1 X 2.5sqmm. | 12 | Mtr. | |
| 120 | 4.12 | S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose . | 10 | Each | |
| 121 | 4.13 | Supply and fixing Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required Standard earthing as per Govt. spcn. | 6 | Each | |
| 122 | 4.14 | Extra copper flat 25 X 5mm | 18 | Mtr. | |
| 123 | 4.15 | Extra G.I flat 30 X 6mm | 12 | Mtr. | |
| 124 | 4.16 | Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make-HPL/ Havells/ Legrand /L&T/ Simens) 4way single door | 7 | Each | |
| 125 | 4.17 | 8way, single door | 4 | Each | |
| 126 | 4.18 | 16way, single door | 8 | Each | |
| 127 | 4.19 | Supply and fixing of 5Amp to 32A rating 240V \"B\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. as required.(make-HPL/ Havells/ Legrand /L&T/Simens) Single pole and Neutral (SP&N) | 12 | Each | |
| 128 | 4.2 | S/F of 32Amp DP MCB including box (Legrand or Simens) | 4 | Each | |
| 129 | 4.21 | S/F of 63Amp DP MCB including box (Legrand or Simens) | 1 | Each | |
| 130 | 4.22 | Supply and fixing of porcelain base kit kat (Anchor/Havells) 100Amp kit kat | 3 | Each | |
| 131 | 4.23 | Supply ,installation, testing and commissioning of main switches (IS 13940 part-3/1993 ) of following capacity on existing surface/wall mounting and completer with HRC fuse links, interconnections, earthing etc. as required (Make-Seimens/ Havells) 32Amp ICTPN main switch on MS angle frame (Anchor / L&T) | 10 | Each | |
| 132 | 4.24 | 63Amp ICTPN Main switch on MS angle frame | 1 | Each | |
| 133 | 4.25 | Supply and fixing of copper bus bar with suitable sheet metal enclosure on MS angle frame with proper grouting on wall including all connections. 63Amp TPN bus bar -300 X 25 X 3mm size | 10 | Each | |
| 134 | 4.26 | Supply and fixing of different type of fitting with lamp S/F of 16W 1'X1' LED Square recessed fitting (Make-Havels/Philips/Bajaj/Crompton) | 8 | Each | |
| 135 | 4.27 | S/F of 12Watt Circular Surface down light LED fitting (Make-Havells/Philips/Crompton) | 12 | Each | |
| 136 | 4.28 | S/F of 36Watt Circular Surface down light LED fitting (Make-Havells/Philips/Crompton)IP65 Protection with heat resistance glass/clear acrylic Bowl,with wire guard | 36 | Each | |
| 137 | 4.29 | S/F of 120W LED street light fitting (Make-Havells/Philips/Crompton)IP66 Protection | 13 | Each | |
| 138 | 4.3 | S/F of 120W LED flood light fitting (Make-Havells/Philips/Crompton)IP65 Protection | 13 | Each | |
| 139 | 4.31 | S/F of 90W LED flood light fitting (Make-Havells/Philips/Crompton)IP65 Protection | 12 | Each | |
| 140 | 4.32 | S/F of 200W LED flood light fitting (Make-Havells/Philips/C&S/Crompton)IP65 Protection | 2 | Each | |
| 141 | 4.33 | S/F of G.I. Street light Bracket with M.S. Clamp | 9 | Each | |
| 142 | 4.34 | Supply and fixing of fan (make-Usha/Orient/V-Guard/Khaitan/Havells/Crompton/Almonard) S/F of 1200mm High speed Ceiling fan, Heavy Duty,durable, copper winding,Aluminium blade(ISI mark)\nCrompton Grave/Khaitan/Orient/Polycab/Bajaj\n Rate Rs.2015.00\nFixing with all materials 320.00\n 2335.00 | 2 | Each | |
| 143 | 4.35 | Exhaust fan 12\" size | 8 | Each | |
| 144 | 4.36 | Wall mounted fan 600\" size | 2 | Each | |
| 145 | 4.37 | Supply of PVC Aluminium armored cables ISI marked.\n(Make- Glowstar/ Polycab/Nicco/KEI as per letter No-309 19.1.2011 of SEEC (R&B) Odisha) 6sq.mm 2core | 100 | Mtr | |
| 146 | 4.38 | 10sq.mm 4core | 180 | Mtr | |
| 147 | 4.39 | 25sq.mm 3 1/2 core | 60 | Mtr | |
| 148 | 4.4 | Cable laying Cable laying on wall surface with steel shaddle | 60 | Mtrs.\n\n | |
| 149 | 4.41 | Trenching with sand spreading and bricks laying and laying of cable in trench in 2 1/2' depth .pvc cable upto 25sqmm | 220 | Mtrs.\n\n | |
| 150 | 4.42 | Supply and fixing of 15/20Watt CFL lamp (Philips/ Havells/ AnchorBajaj) | 10 | Each | |
| 151 | 4.43 | Supply and fixing of fan regulator(Cona/ Anchor/ Usha/Bajaj) Electronics step type | 2 | Each | |
| 152 | 4.44 | Supply and fixing of extra down rod 20mm dia for 20cm x 5 | 2 | Each | |
| 153 | 4.45 | Supply and fixing of 32Amp FT/DP switch (Make-Cona/Anchor) | 10 | Each | |
| 154 | 4.46 | S/Fof B.H fitting CFL type complete (Bajaj/Philips with lamp | 6 | Each | |
| 155 | 4.47 | Supply , installation , testing and commissioning INDOOR pannel board with danger board 16/18 SWG pannel box 36 X 24X 5= sq. inch for single door made out of CR sheet of 16SWG and boarder angle frame to provide above pannel with proper space ,hinges, and other accessories , hinged door must be painted one coated red oxide and two coat enamel gray paint | 2880 | Sq.inch | |
| 156 | 4.48 | Supply and fixing of internal wiring to equipment installed in the pannel board with required size of copper multistrand single core cables duly crimped with copper lugs and all connections 36 X 24 including cost of copper conductor and other fittings like gasket ,screw , nut and bolt , insulating materials etc. | 2880 | Sq.inch | |
| 157 | 4.49 | S/F of bus bar 50 x 8mm with required size of insulating material and nut and bolts | 6 | Mtr | |
| 158 | 4.5 | Supply , installation , testing and commissioning of OUTDOOR pannel board with one coat of powder coating wheather resistant enamel paint with danger board . Supply and fixing of Indicator lamp with toggler switch and fuse | 10 | Each | |
| 159 | 4.51 | S/F of PVC T/C U.B almn. Wire with No.10/12SWG G.I supporting wire 4mm2 Almn wire | 90 | Mtr | |
| 160 | 4.52 | S/F of No.8 G.I wire as earth continuity | 10 | Kg | |
| 161 | 4.53 | S/F of PVC pipe for Net wiring | 280 | Mtr | |
| 162 | 4.54 | Supply of Invertor,sine wave UPS 2300VA (Make Microtech/Su-kam/Luminous) | 3 | Each | |
| 163 | 4.55 | Supply of Invertor Battery 12V 150AH(Make Exide/Amrom/Microtech/Luminous with 48 Month warranty) | 6 | Each | |
| 164 | 4.56 | Supply of Invertor Stand(Make Microtech/Su-kam/Luminous) | 3 | Each | |
| 165 | 4.57 | Priming one coat with any approved primer and Painting 2 coats to iron works with enamel paint of approved shade and quality including cost, conveyance, taxes of all materials, labour, T&P required for the work complete.3mtr height electric pople | 92.246 | sqm | |
| 166 | 4.58 | Supply all materials, labour, T&P for fitting and fixing of required holders with necessary clamps, screws, nuts & bolts, required m.s.housing as per existing design, required anodized cap and glass cover, required trench digging for re-fixation of tilted and overturned light fitting posts, constructing required RCC bases including fitting of light posts with required base screws, nut, bolts including drilling holes wherever necessary , enamel painting to m.s housing, fitting, fixing of water proof junction boxes in all posts with supply & fixing of 15 watt led lamp of (Bajaj/Havells/Crompton Greaves make) etc. complete in all respects.(old approved rate) | 40 | Each | |
| 167 | 4.59 | Supply & fixing of Bollard Lights (warm White ) with die cast Aluminium body , TRransparent, Tempered Glass Diffuser IP65,with LED lamp Equiv. to JAQUAR/ HAVELLS/CHROMPTON/PHILIPS Code No and Junction Box (IEO8) | 10 | Each | |
| 168 | 4.6 | Supply of outdoor type neon flexible rope LED light of different colours | 100 | mtr | |
| 169 | 4.61 | Supply of SMPS (LED driver for above rope LED light) | 20 | Each | |
| 170 | 4.62 | Supply of 20 watt LED flood light of different colours of IP-65 specification. | 30 | Each | |
| 171 | 4.63 | Labour charges for fitting & fixing of LED rope light | 100 | mtr | |
| 172 | 4.64 | Labour charges for installation of 20 watt LED flood light in different locations. | 30 | Each |
AI Tender Summary
Tender Timeline
Jan 21, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 04, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 05, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender