| 1 | 1 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridge complete all as specified and directed. | | 325 | Sqm |
|---|
| 2 | 2 | S&F pre-painted galvatume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of colour as approved by GE having tensile strength of 550Mpa as in roof covering, ridge, fixed with self tapping screws complete all as specified and directed. | | 300 | Sqm |
|---|
| 3 | 3 | S&F pre-painted galvatume aluminium zinc coated GI based plain steel sheet 0.50mm thick of colour as approved by GE having tensile strength of 550Mpa as in roof covering, ridge, fixed with self tapping screws complete all as specified and directed. | | 25 | Sqm |
|---|
| 4 | 4 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and frame work complete all as specified and directed. | | 250 | Sqm |
|---|
| 5 | 5 | S&F false ceiling with GI main snap grid of size 600x600 mm using main Tee of size 24x28x0.40mm prepunched to accept cross tee of size 24x28x0.40mm and wall angles of size 25x25x0.40mm fixed with wall around of size with and including 4 mm thick plain fiber cement board white colour designer tiles as approved by GE of size 595x595 mm placed in the grid and held in position duly suspended by 4mm dia GI wire hanger from the roof with and necessary provision for light fixture etc complete as per manufacturers instructions complete all as spd & directed. | | 250 | Sqm |
|---|
| 6 | 6 | Dismantling floor, hearth tiles including cement mortar bedding (but not backing) removing serviceable tiles and rubbish out of premises, complete all as specified and directed. | | 605 | Sqm |
|---|
| 7 | 7 | S&F joint free coloured Non-skid ceramic tiles 6 to 7 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in Cement Mortar 1:6 complete all as spd & directed. | | 20 | Sqm |
|---|
| 8 | 8 | M&L for Glazed ceramic tiles in vertical surface 7 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.18 sqm, set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles over 10mm thick rendering in Cement Mortar 1:4 on fair faces of brick work or concrete surfaces complete all as spd & directed. | | 365 | Sqm |
|---|
| 9 | 9 | S&F coloured vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over & including 15 mm thick screed bed in Cement Mortar 1:6 complete all as spd & directed. | | 220 | Sqm |
|---|
| 10 | 10 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as spd & directed. | | 3 | Cum |
|---|
| 11 | 11 | M&L for brick work with sub class 'B' old size bricks in Cement Mortar 1:6, straight or curved on plan exc 6m mean radius complete all as spd & directed. | | 3 | Cum |
|---|
| 12 | 12 | M&L for 75mm thick PCC 1:3:6 type C-2 (40mm graded agg) for plinth protection laid in bays and finished even and fair including filling the joint with bitumen mastic all as specified and directed over rammed earth complete all as spd and directed. | | 60 | Sqm |
|---|
| 13 | 13 | Taking down cement or cement lime plaster, any description, on brick or stone walls including racking out joints, hacking for key, scrubbing down with water, etc. complete all as spd & directed. | | 230 | Sqm |
|---|
| 14 | 14 | M&L for rendering 15mm thick cement plaster in Cement Mortar 1:4 on brick work or concrete surfaces finished even and fair complete all as spd & directed. | | 120 | Sqm |
|---|
| 15 | 15 | All as per item No. 14 above but in Cement Mortar 1:6 finished even and smooth all as spd and directed. | | 100 | Sqm |
|---|
| 16 | 16 | M & L for 10 mm thick rendering in cement mortar 1:3 on concrete surfaces of ceiling, chajja and like surface finished even and smooth without using extra cement, complete all as specified and directed. | | 10 | Sqm |
|---|
| 17 | 17 | M&L for Preparation of new surfaces (Plastered or un-plastered) on ceiling and applying three coats of white lime wash, complete all as specified and directed. | | 10 | Sqm |
|---|
| 18 | 18 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. | | 4.5 | Cum |
|---|
| 19 | 19 | M&L for complete removal of old decorated surfaces on walls and applying two coat of cement base paint complete all as spd & directed. | | 160 | Sqm |
|---|
| 20 | 20 | M&L for preparing newly plastered surfaces on walls and applying two coats of cement base paint complete all as spd & directed. | | 120 | Sqm |
|---|
| 21 | 21 | M&L for preparing newly plastered surfaces on walls and applying two coat of oil bound distemper (undecorated surface) complete all as spd & directed. | | 100 | Sqm |
|---|
| 22 | 22 | M&L for complete removal of existing treatment on walls and applying two coats of oil bound distemper complete all as spd & directed. | | 40 | Sqm |
|---|
| 23 | 23 | Taking up or down 15mm dia steel tubing and connection including cleaning or removal from the site of work complete all as spd & directed. | | 65 | RM |
|---|
| 24 | 24 | All as per item No. 23 above but 20mm dia complete all as specified and directed. | | 25 | RM |
|---|
| 25 | 25 | S&F galvanized steel tubing, 15mm bore, medium grade including all fittings and short pieces, fixed complete to walls and ceiling or laid in floors, complete all as spd & directed. | | 65 | RM |
|---|
| 26 | 26 | All as per item No. 25 above but 20mm bore tubing complete all as specified and directed. | | 25 | RM |
|---|
| 27 | 27 | S&F in repair vitreous China coloured European type WC with \"P\" or \"S\" trap 1st quality including connection to drain and fixing bolts complete all as specified and directed. | | 6 | Each |
|---|
| 28 | 28 | S&F in repair PVC low level white flushing cistern, valveless syphonic action type 10 ltr capacity with inlet, ball valve, float and handle including PVC flush pipe 32mm dia bend and a pair of mild steel iron brackets of suitable size including making necessary connection to water supply pipeline complete all as spd & directed. | | 6 | Each |
|---|
| 29 | 29 | S&F in repair 600x450mm bevelled edge looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as spd & directed. | | 6 | Each |
|---|
| 30 | 30 | S&F in repair tubular towel rail 20mm dia, Aluminium anodised, D type, 60cm long between flanges complete all as spd and directed. | | 6 | Each |
|---|
| 31 | 31 | S&F in repair for PVC connection 450mm long with 2 nos PTMT check nuts, suitable for 15mm dia bore complete all as spd & directed. | | 30 | Each |
|---|
| 32 | 32 | S&F in repair ball brass valves 20mm dia high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as spd & directed. | | 2 | Each |
|---|
| 33 | 33 | S&F in repair gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed for 20mm dia pipe (ISI Marked) complete all as specified and directed. | | 4 | Each |
|---|
| 34 | 34 | S&F in repair CP grating 125mm dia, complete all as specified and directed. | | 12 | Each |
|---|
| 35 | 35 | S&F in repairs bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy, chromium plated long body with flange complete all as specified and directed. | | 12 | Each |
|---|
| 36 | 36 | S&F in repair chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified and directed. | | 24 | Each |
|---|
| 37 | 37 | S&F in repair 15mm dia brass chromium plated mixer for mixing hot and cold water screwed down for iron pipe and fixed to WHB including taking out existing mixer from old WHB, complete all as specified and directed. | | 6 | Each |
|---|
| 38 | 38 | S&F in repair 15mm dia chromium plated wall mixer hot & cold l bend 3 in 1 pattren fixing and connection to pipes complete all as specified and directed. | | 6 | Each |
|---|
| 39 | 39 | S&F in repair chromium plated brass angle valve dual type (two in one) suitable for 15mm bore pipe complete all as specified and directed. | | 6 | Each |
|---|
| 40 | 40 | S & F in repair 125mm size brass CP shower rose complete all as specified and directed. | | 6 | Each |
|---|
| 41 | 41 | S&F vitreous china WHB white (flat back or angle back type) size 550x400mm with waste pipe, brass chromium plated waste coupling with long screw shank & fly nut flanged and pair of C.I. brackets including cutting for and pinning in ends of brackets or erecting stand complete all as spd & directed by Engr-in-Charge. | | 6 | Each |
|---|
| 42 | 42 | S&F in repair brass chromium plated toilet paper holder, complete all as specified and directed. | | 6 | Each |
|---|
| 43 | 43 | S&F in repair brass chromium plated soap dish, complete all as specified and directed. | | 6 | Each |
|---|
| 44 | 44 | S & Fixed in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP brackrt gaurd and railling 60 cm long complete all as specified and directed. | | 6 | Each |
|---|
| 45 | 45 | S&F in repair glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with screws fancy type complete all as specified and directed. | | 6 | Each |
|---|
| 46 | 46 | Dismantling of 100/75 mm bore cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as spd & directed. | | 20 | RM |
|---|
| 47 | 47 | S&F 100mm bore cast iron soil waste and vent pipe (Cast type) in any length with or without ears with cement joints fixed to walls or laid in floor etc complete all as spd & directed. | | 10 | RM |
|---|
| 48 | 48 | S&F 75 mm bore cast iron soil waste and vent pipe (Cast type) in any length with or without ears with cement joints fixed to walls or laid in floor etc complete all as spd & directed. | | 10 | RM |
|---|
| 49 | 49 | M&L in repair cast iron floor trap 75 mm out let diameter with MS grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as spd & directed. | | 6 | Each |
|---|
| 50 | 50 | Repairs to Aluminium windows including taking down the shutter n.exc 2.00 Sqm for repairs/replacement of defective fitting & fixtures and refixing in the same opening complete all as specified and directed. | | 12 | Each |
|---|
| 51 | 51 | S&F in repair 100mm dia (bore of pipe) cast iron bends and T(any radius), diminishing pieces or tapers (larger bore measured) with cement joints, complete all as specified and directed. | | 6 | Each |
|---|
| 52 | 52 | All as per item 51 above but 75mm dia (bore of pipe) bends complete all as specified and directed. | | 6 | Each |
|---|
| 53 | 53 | S&F in repair 75 mm dia (bore of pipe) cast iron cowl fixed with cement joints, complete all as specified and directed. | | 6 | Each |
|---|
| 54 | 54 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft / loose soil complete all as spd & directed. | | 18 | Cum |
|---|
| 55 | 55 | Demolition and breaking up drain pipes (salf glazed stone ware AC or reinforced concrete) set in cement mortar including bedding and haunching of 150 mm dia pipe complete all as spd & directed. | | 60 | RM |
|---|
| 56 | 56 | M&L cement concrete bed to 150mm dia drain pipes including\npacking under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:4:8 type D-2 complete all as spd & directed. | | 56 | RM |
|---|
| 57 | 57 | M&L for 150mm internal dia Reinforced concrete pipes, class NP 2 with one collar per length of pipe, laid in trenches and lead jointed complete all as spd & directed. | | 60 | RM |
|---|
| 58 | 58 | M&L cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and re-forming benching as required for 100mm dia pipe complete all as spd & directed. | | 1 | Each\nPipe |
|---|
| 59 | 59 | M&L providing precast cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in manhole covers slab and set in cement mortar 1:6 complete all as spd & directed. | | 1 | Cum |
|---|
| 60 | 60 | S&F mild steel deformed or twisted bars 8mm dia and over cut to length bent to shape required including cranking, bending etc and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as spd & directed. | | 40 | Kg |
|---|
| 61 | 61 | Returning and filling in including spreading, levelling watering and well ramming in layers not exc 25cm thick in soft/loose soil complete all as spd & directed. | | 15 | Cum |
|---|
| 62 | 62 | Removing excavated soil to a distance not exc 50 Mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as spd & directed. | | 3 | Cum |
|---|
| 63 | 63 | S&F in repair rotational moulded ploythelene water storage tank triple layered (cylindrical, vertical with closed top) 1000 ltrs capacity (ISI Marked), including cover, hoisted and fixed in position complete all as spd & directed. | | 2 | Each |
|---|
| 64 | 64 | M&L for PCC 1:3:6 type C-2 (20mm graded agg) as in foundation of manholes complete all as spd & directed. | | 0.5 | Cum |
|---|
| 65 | 65 | M&L for PCC 1:2:4 type B-1 using 20mm graded stone agg as in coping, kerbs, bed plates, benching incl weathering, slightly rounded or chamfered angle and throating complete all as spd & directed. | | 0.5 | Cum |
|---|
| 66 | 66 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) including removal of rubbish outside complex ( MOD land), complete all as specified and directed. | | 0.5 | Cum |
|---|
| 67 | 67 | M&L for nominal mix reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in shelves, landings, cover slabs, chullah hoods, chajjas, water trough and similar articles including form works , set in cement mortar 1:4, complete all as specified and directed. (reinforcement to be measured & paid separately). | | 0.5 | Cum |
|---|
| 68 | 68 | Repairs to Aluminium Doors including taking down the shutter n.exc 2.00 Sqm for repairs/replacement of defective fitting & fixtures and refixing in the same opening complete all as specified and directed. \n(Note : Any Unsv item/material which are required to be replaced shall be paid under respective item separately.) | | 12 | Each |
|---|
| 69 | 69 | Supply and fixing in repair Mortice lock brass vertical type size 100 mm with 4 Levers complete all as specified and directed. | | 6 | Each |
|---|
| 70 | 70 | Supply and fixing in repair Door closer (Aluminium Body) hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg complete all as specified and directed. | | 6 | Each |
|---|
| 71 | 71 | S&F framed work such as grills, grating etc. with ends of bars shouldered and /or riveted , or forged into spikes ;framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar works con-forming to Fe290. Gde-E-165 complete all as specified & directed by Engr-in-Charge. | | 140 | Kg |
|---|
| 72 | 72 | Dismantling structural MS work / MS pipe in purlins / rafters etc of any description complete all as spd & directed. | | 5 | Qtl |
|---|
| 73 | 73 | S&F for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 including one shop coat of zinc chromate primer paint (including preparation of surface) complete all as spd & directed. | | 500 | kg |
|---|
| 74 | 74 | M&L for preparation of new steel & iron surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of syntethic enamel paint over one coat of red oxide primer complete all as spd & directed. | | 25 | Sqm |
|---|
| 75 | 75 | Supply and fix TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia conforming to Fe-410 - 0, complete all as specified and directed. | | 30 | Kg |
|---|
| 76 | 76 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sq. m each complete all as spd & directed. | | 2 | Each |
|---|
| 77 | 77 | S&F mild steel framed work in doors/windows frames or gates of angle or other section conforming to Fe-410-0 or Fe-310-0 with rail, braces, holdfast, etc complete incl fixing of hinges and fixing in position including one shop coat of zinc chromate primer paint including preparation of surface) complete all as spd & directed. | | 30 | Kg |
|---|
| 78 | 78 | S&F (Factory made) 35mm thick 2nd class HW (Hollock) plain framed panelled shutters (Minimum two panels) with lock rail and panels of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The sizes of rail and stiles as per IS:1003 ( Part I), kiln seasoned and chemically pressure treated and fixed in position complete all as spd & directed. | | 3 | Sqm |
|---|
| 79 | 79 | S&F stainless steel butt hinges 100mm size complete all as spd & directed. | | 6 | Each |
|---|
| 80 | 80 | S&F aluminum anodized barrel tower bolts of extruded section of size 125mm complete all as spd & directed. | | 4 | Each |
|---|
| 81 | 81 | S&F aluminum handles cast type anodised of size 150mm complete all as spd & directed. | | 4 | Each |
|---|
| 82 | 82 | S&F 300mm mild steel sliding door bolts plate type stove enamellled block with bright bolt not less than 12mm dia with and including a minimum of 6 bolts, four on bolt plate and two on staple plate complete all as spd & directed. | | 2 | Each |
|---|
| 83 | 83 | M&L for preparting new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as spd & directed. | | 7 | Sqm |
|---|
| 84 | 84 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n. exc. 1.5 sq. m each complete all as spd & directed. | | 2 | Each |
|---|
| 85 | 85 | S&F steel window with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing bar and including 12mm dia square bar of approved grill pattern complete all as spd & directed by Engr-in-Charge. | | 2 | Sqm |
|---|
| 86 | 86 | All as per item No. 85 above but without glazing bars and grills complete all as specified and directed. | | 2 | Sqm |
|---|
| 87 | 87 | M&L for 3mm thick sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as spd & directed. | | 1.5 | Sqm |
|---|
| 88 | 88 | S&F galavanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed to tinned tacks or wire staples to wooden frames complete all as spd & directed. | | 1.5 | Sqm |
|---|
| 89 | 89 | Taking down carefully copper/aluminum point wiring (light/fan socket or power) complete including fittings such as switches, ceiling roses, pendents, regulators, sockets light fittings etc and removing the material to MES store yard including making good the disturbed surface to match the existing all as specified and directed by Engineer-in-charge. | | 143 | Per point |
|---|
| 90 | 90 | M&L for point wiring with stranded copper conductor FRLS 1.5 Sqmm size nominal area PVC insulated unsheathed cable 1100 volts grade conforming to IS:694 drwan in concealed PVC rigid conduit as directed and replacement of GI boxes of reqd sizes to accomodate switches/sockets as per site requiremnt and including single core stranded copper conductor 1.5 Sqmm PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit all as specified and directed by Engr-in-charge for the following :- \n | BI01010001010000000000000515BI0100001125 | | |
|---|
| 91 | 90.01 | One light/fan/bell point controlled by one switch. | | 75 | Per point |
|---|
| 92 | 90.02 | One 5 Amp socket out let independent. | | 35 | Per point |
|---|
| 93 | 90.03 | One 5 Amp socket out let on same board | | 7 | Per point |
|---|
| 94 | 91 | M&L for point wiring with stranded copper conductor FRLS 2.5 Sqmm size nominal area PVC insulated unsheathed cable 1100 volts grade conforming to IS:694 drwan in concealed PVC rigid conduit as directed and replacement of GI boxes of reqd sizes to accomodate modular switches/sockets as per site requiremnt and including single core stranded copper conductor 2.5 Sqmm PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit for one 3 pin socket outlet 15 amps independent board/geyser point complete all as specified and directed by Engr-in-charge. | | 26 | Per point |
|---|
| 95 | 92 | Supply and fixing in repair switch modular 6A one way complete all as specified and directed. | | 117 | Each |
|---|
| 96 | 93 | Supply and fixing in repair switch modular 16 Amp complete all as specified and directed. | | 20 | Each |
|---|
| 97 | 94 | Supply and fixing in repair socket modular 5 pin 6 amps complete all as specified and directed. | | 42 | Each |
|---|
| 98 | 95 | Supply and fixing in repair universal socket modular 2 in 1, 3 pin, 5 and15 amps complete all as specified and directed. | | 20 | Each |
|---|
| 99 | 96 | Supply and fixing in repair switch modular 6A bell push with inner and front plate white complete all as specified and directed. | | 6 | Each |
|---|
| 100 | 97 | S&F in repair electric bell buzzer AC 230 Volt SP fixing on concealed and painted with stove enameled black paint covered with 3mm thick plastic laminated sheet cover of required colour fixed with brass screws and cup washers complete all as specified and directed. | | 6 | Each |
|---|
| 101 | 98 | S&F in replacement lamp holder with insulated body with back plate suitable for batten fitting complete all as specified and directed. | | 6 | Each |
|---|
| 102 | 99 | S&F in replacement of 7 Watt LED lamp 6500K complete all as specified and directed. | | 6 | Each |
|---|
| 103 | 100 | Supply and Fixing in repair Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated 20W LED 6000K (4 ft.)With LED Tube Rod complete all as specified and directed.\nMake: Havells Cat Part No. LHEWEBPIN1W020 or equivalent in Philips/ Bajaj/ Crompton Greaves/ C&S Electric/ Polycab/ Halonix | | 22 | Nos |
|---|
| 104 | 101 | S&F in repair Decorative walll light fixture made up of Polycarbonate, Spiral B-22 Base suitable for 7 Watt LED Lamp including 7Watt Lamp complete all as specified and directed. | | 13 | Each |
|---|
| 105 | 102 | Supply and Fixing in repair Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated 10 W LED 6000K (2 ft.)With LED Tube Rod complete all as specified and directed. | | 6 | Each |
|---|
| 106 | 103 | S&F in repair ceiling fan regulator support modular type complete all as specified and directed. | | 14 | Each |
|---|
| 107 | 104 | S&F in repair polycarbonate ceiling rose 3 pin flush type 6 A 250 V AC with ISI mark including ring for jumbo ceiling rose complete all as specified and directed. | | 63 | Each |
|---|
| 108 | 105 | S&F in repair on distribution boards , single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity and terminal box suitable upto 35 sqmm cable complete conforming to IS 8828 of 1996, IEC 60898 of 2002 including taking down old MCB's complete all as specified and directed. | | 42 | Each |
|---|
| 109 | 106 | S&F in repair on distribution boards , Double pole MCB 40 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘D’ curve, 10 KA breaking capacity and terminal box suitable upto 63 sqmm cable complete conforming to IS 8828 of 1996, IEC 60898 of 2002 including taking down old MCB's complete all as specified and directed. | | 6 | Each |
|---|
| 110 | 107 | S&F in repair factory made epoxy polyester powder coated distribution board SP & N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with metal door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 alongwith cable end box for above DB including taking down old DBs complete all as specified and directed.\nMake: Legrand Model - 607727 for DB and 607754 for cable end box or equivalent in L&T/ ABB/ Scheneider/ Seimens/ C&S Electric/ Havells\nNOTE:\n(a) MCBs shall be measured and paid separately.\n(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch 'A'. | | 6 | Each |
|---|
| 111 | 108 | Taking down sub main wiring off sizes complete all as specified and directed. | | 100 | RM |
|---|
| 112 | 109 | S&F submain concealed wiring alongwith earth wire with 2 runs of 6 Sqmm (Main Cable and neutral) and one run of 6 Sqmm as earth wire of multistranded unsheathed colour code FRLS PVC insulated copper conductor, single core cable drawn through and including rigid PVC conduit of size 25 mm dia with all fittings and accessories complete all as specified and directed. | | 100 | RM |
|---|
| 113 | 110 | S&F in repair factory made epoxy polyster powder coated distribution board 20 A single pole (fabricated from minimum 1.6 mm thick CRCA sheet) and one metra plug socket and neutral links fixed flush to wall suitable for lexic MCB 'C' curve 10 KA breaking capacity and cable terminal box suitable upto 35 sqmm conforming to IS:8828 of 1996 complete all as specified and directed.\nMake: Legrand Cat part No 607841 or equivalent in L&T/ ABB/ Scheneider/ Seimens/ C&S Electric/ Havells\n\n | | 6 | Each |
|---|
| 114 | 111 | S&F TV Sockets support modular type complete all as specified and directed. | | 6 | Each |
|---|
| 115 | 112 | Supply and fixing metal type exhaust fan single phase, 230/240 V of 300 mm sweep including cutting of holes in a round shape,fixing rag bolts,plastering and fixing the fan complete all as specified and directed. | | 6 | Each |
|---|
| 116 | 113 | S&F of electric storage water heater of capacity 25 ltr with vitreous enamel coating with all accessories and fittings arrangements and testing after installation complete all as specified and directed.\nMake: Havells Model- Monza EC or equivalent in Crompton Greaves/ Bajaj/ Morphy Richards/ Usha lexus/ Jaguar/ Luminous/ Orison.\nNote: Rates are inclusive of connection from existing pipe line to electric storage water heater. | | 6 | Each |
|---|
| 117 | 114 | M&L for earthing complete with galvanized steel earth plate 600 x 600 x 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground leve, connected to galvanised iron earthing lead 4 mm by means of bolts, nuts, check-nuts, and washers of galvanised iron or steel besides welding at all joints as shown in drawings and including excavation and earth work, GI pipe light grade 25 mm bore for protection of GI strip from earth electrode to and including the earth test point of galvanised iron / steel of size 75 x75 x 25 mm, supplying and laying charcoal dust, common salt, PCC 1:2:4 type B1 chamber and MS angle iron frame 40 x 40 x 3 mm and RCC cover 40 mm thick (1:2:4) type B1 using 20 mm graded stone aggregate reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI Pipe light grade for watering all as shown in drawing and connected to earth test point including testing complete all as specified and directed. As per SSR plate No. 3. | | 1 | Each |
|---|
| 118 | 115 | S&F in repair of factory made epoxy polyester powder coated distribution board TP & N 4 way (VTPN MCCB DB) with metal double door (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for DPX 160, 4 pole MCCB and ELM as incommer and 12 SP MCBs outgoings and conforming to IS: 8623 along with cable end box for above DB including taking down old DBs complete all as specified and directed.\nNOTE :-\n(a) MCBs shall be measured and paid separately.\n(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. | | 1 | Each |
|---|
| 119 | 116 | S&F in repair 25 watt LED street light made up of pressure die-cast aluminium IP65 roadway luminaire with high power LEDs as light source & exclusively designed polycarbonate cover alongwith electronic driver complete all as specified and directed. | | 2 | Each |
|---|
| 120 | 117 | S&F in repair of MCCB 125 Amp 3 pole 16 KA at 415 V with fixed thermal megnatic release complete all as specified directed. | | 1 | Each |
|---|
| 121 | 118 | Taking down ceiling fan , sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed. | | 14 | Each |
|---|
| 122 | 119 | Hanging only celing fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed. | | 14 | Each |
|---|
