Special Repair To Bldg No P17 ( B-2 ) At Engr Park Under Ge Missamari
Tender Value
43.69 Lakhs
Estimated cost
Bid Submission
06 Feb 2020
0 days left
EMD
87380
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
MISSAMARI → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Repair To Bldg No P17 ( B-2 ) At Engr Park Under Ge Missamari
BOQ
| Nature of Work : SPECIAL REPAIR TO BLDG NO P-17(B-2) AT ENGR PARK UNDER GE MISSAMARI. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level), complete all as specified and as directed. | 33.25 | CUBIC METRE | |
| 2 | 2 | Demolition Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any description, complete all as specified and as directed. | 19.5 | CUBIC METRE | |
| 3 | 3 | Dismantling Timber Fillet, Rails, Posts, Rafter, Purlins, etc. under 40 Sq Cm in Section in framed Work, complete all as specified and as directed. | 100 | RUNNING METRE | |
| 4 | 4 | Dismantling Wall and Ceiling Boards (Fibre, Pulp, Insulation, etc.) or Insulation Boards /Blankets/Slabs, any description and any thickness including Cover Fillets, Cornices, etc., complete all as specified and as directed. | 100 | SQUARE METRE | |
| 5 | 5 | Taking down Chowkat or Frame (without taking off Shutter from the Frame) not exc. 1.50 Square Metre Each, complete all as specified and as directed. | 5 | EACH | |
| 6 | 6 | Dismantling Wrought Iron or Mild Steel Work, viz. Mild Steel Flat Iron (Wind Tie) and Similar Work including Mild Steel Bolts, Nuts, etc., complete all as specified and as directed. | 3.88 | QUINTAL | |
| 7 | 7 | Dismantling AC (corrugated, semi-corrugated, etc) sheets in roof coverings complete all as specified and directed. | 2515 | SQUARE METRE | |
| 8 | 8 | Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water remove Dust, debries/ rubbish etc., complete all as specified and as directed. | 200 | SQUARE METRE | |
| 9 | 9 | M&L hacking out old/broken Glass (any thickness, size, quality or description) from Wooden Frames, Glazed with Putty or fixed with Beads, complete all as specified and as directed. | 10 | SQUARE METRE | |
| 10 | 10 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories, complete all as specified and as directed. | 180 | RUNNING METRE | |
| 11 | 11 | M&L Cement Concrete 1:4:8,type D2 (40mm graded aggregate) 75mm thick as in Sub-base, etc, complete all as specified and as directed. | 50 | SQUARE METRE | |
| 12 | 12 | M&L 100mm thick Cement Concrete 1:2:4, type B2 (40mm graded aggregate) as in floor in alternate bays, complete all as specified and as directed. | 150 | SQUARE METRE | |
| 13 | 13 | M&L Plastic Dividing Strip 1.5mm thick and 38mm Wide and inserted in Position as in Floor, complete all as specified and as directed. | 330 | RUNNING METRE | |
| 14 | 14 | M&L for 75mm thick Cement Concrete 1:3:6 (40mm graded aggregate),as in Plinth Protection, etc., laid in alternate bays not exceeding 2mtr length of each bay, finished Even and fair, complete all as specified and as directed. | 120 | SQUARE METRE | |
| 15 | 15 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade, colored, rubber mounted, of approved quality with grey cement and pigment laid over and including 25mm thick sand cushioning, complete all as specified and directed. | 50 | SQUARE METRE | |
| 16 | 16 | M&L Cement Concrete 1:2:4 (20mm graded aggregate) in Channels, etc. including Formwork as required/ordered at Site(s), complete all as specified and as directed. | 8.5 | CUBIC METRE | |
| 17 | 17 | M&L Extra forming Fair Finished to Drains or Channels 30 Cm Inner Girth in Cement Concrete using Extra Cement including Forms Moulds Mitred/ Stopped Ends, etc., complete all as specified and as directed. | 170 | RUNNING METRE | |
| 18 | 18 | M&L Cement Concrete 1:3:6,type C1 (20mm graded aggregate) in Kerbs, Coping, Window or Door Cill, Lintels, Bed Plates, etc. Chamfered Edges including use and waste of Formwork as required/ordered at Site(s), complete all as specified and as directed. | 0.5 | CUBIC METRE | |
| 19 | 19 | M&L Pre-cast Reinforced Cement Concrete 1:2:4 (20mm graded aggregate) in Cover Slabs for Manholes, Septic tanks, Shelves and Similar Articles, etc., Set in Cement Mortar 1:4 including neccesary forms,moulds etc., , complete all as specified and as directed.\nNOTE : Reinforcement will be measured and paid separately under relevant Item.\n | 1.1 | CUBIC METRE | |
| 20 | 20 | M&L Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed. | 19.5 | CUBIC METRE | |
| 21 | 21 | M&L TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed. | 180 | KILO- GRAM | |
| 22 | 22 | M&L Second Class Hardwood Plain Fillets sqaure, rectangular or triangular in Section Clean swan, secured with Nails, sectional area exc. 13 Sq Cm but not exc. 25 Sq Cm, complete all as specified and as directed. | 100 | RUNNING METRE | |
| 23 | 23 | M&L Second Class Hardwood Plain Fillets sqaure, rectangular or triangular in Section Clean swan, secured with Nails, sectional area exc. 3 Sq Cm but not exc. 6 Sq Cm, complete all as specified and as directed. | 200 | RUNNING METRE | |
| 24 | 24 | S&F Non-Asbestos Fibre Cement Building boards 4.0mm thick as in Ceiling and fixed/laid/inserted to GI Snap Grid Frame Work with nails, complete all as specified and as directed. | 100 | SQUARE METRE | |
| 25 | 25 | M&L Steel Ventilator with Top Hung Shutter including Hinges, Steel Peg Stay and fixed, complete all as specified and as directed. | 6 | SQUARE METRE | |
| 26 | 26 | M&L Sheet Glass, Ordinary, 3.0mm thick, fixed with Beads or Oil Putty, area not exc. 0.50 SQM in Each Pane, complete all as specified and as directed. | 15 | SQUARE METRE | |
| 27 | 27 | S&F Framed work as in doors or gates of angle or other section confirming FE 410-W(Gde-E-250) with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, complete all as specified and directed. | 200 | KILO- GRAM | |
| 28 | 28 | M&L for Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets,complete all as specified and directed. | 7.5 | SQUARE METRE | |
| 29 | 29 | S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50 mm thick of an Colour having tensile strength of 550 Mpa as in Roof Covering, fixed with Self Tapping Screws as specified, complete all as specified and as directed. | 2365 | SQUARE METRE | |
| 30 | 30 | S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Plain Steel Sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Roof Covering/Cladding to Wall, fixed with Self Tapping Screws as specified, complete all as specified and as directed. | 70 | SQUARE METRE | |
| 31 | 31 | S&F 2mm Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc, complete all as specified and as directed. | 80 | SQUARE METRE | |
| 32 | 32 | M&L for 1.25mm thick Mild steel sheet gutters, as per required shape at site, complete all as specified and directed. | 170 | SQUARE METRE | |
| 33 | 33 | M&L Rendering 15mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and fair, complete all as specified and as directed. | 282 | SQUARE METRE | |
| 34 | 34 | M&L Rendering 15mm thick in Cement Mortar 1:4 on Fair Faces of Brick Walls or on Concrete Surfaces in Two Coats, 1st Coat of 10mm thick and 2nd Coat of 5mm thick including mixing with WPC to 2nd Coat as per Manufacturer's instructions, Plastered Surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.\nNOTE : Integral Water Proofing Compound shall be Measured and Paid separately as ‘Supply only’ under relevant Items. | 100 | SQUARE METRE | |
| 35 | 35 | M&L preparing old decorated Plastered Surfaces of Walls including cornices, plasters etc and applying One Coat of White Wash, complete all as specified and as directed. | 570 | SQUARE METRE | |
| 36 | 36 | M&L preparing new plastered Surfaces of Walls and applying Three Coats of White Wash, complete all as specified and as directed. | 282 | SQUARE METRE | |
| 37 | 37 | M&L preparing new Plastered Surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed. | 100 | SQUARE METRE | |
| 38 | 38 | Supply only liquid Water Proofing Compound, complete all as specified. | 5.6 | Litre | |
| 39 | 39 | M&L for complete removal of existing treatment of Surfaces of Walls and applying Two Coats of Exterior Acrylic Emulsion Paint over a coat of Alkali Resistant Primer, complete all as specified and as directed. | 950 | SQUARE METRE | |
| 40 | 40 | M&L preparing new or previously untreated Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed. | 15 | SQUARE METRE | |
| 41 | 41 | M&L preparing old painted steel Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), tint to achieve glossy finish, complete all as specified and as directed. | 1200 | SQUARE METRE | |
| 42 | 42 | S&F in repair PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any length with Rubber Ring Joints fixed to Walls,clamp/hooks for holding pipe etc, complete all as specified and as directed. | 100 | RUNNING METRE | |
| 43 | 43 | S&F in repair PVC (SWR) 110mm bore (dia) Bend any type, provided with Access Door, etc. and jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed. | 18 | EACH | |
| 44 | 44 | Supply and fix for Tubo Ventilators Industrial/domestic turbo ventilator as in Manufactureres Insturction :- (i) (Turbine Dia 28 Inch (760mm), (Nech/Throat-24\"), (Height-18\"/610mm) (Vanes(Blades) - 42 Vanes, Aluminium 0.50mm Alloy 8011), Base Ring MOC(Mounting ring - Stainless steel),(Top plate MOC- Stainless steel 0.80 mm thickness). (ii) Rotation - Twin sealed 6203ZZ bearing with self lubricating duponty zytel 101L Polyamide 66 resin to ensure frictionless rotation even at lowest wind velocity Twin sealed 6201ZZ bearings with self lubricating Duponty Zytel 101L Polyamide 66 resin to ensure frictionless rotation even at lowest wind velocity. (iii) (Centre shaft : 18mm high carbon steel zinc plated) ( Inner Arms - M.S. with electro zinc plating), (Outer Arms - M.S. with electro zinc plating), (Frp base plate - 2mm thick clear 1.020 mtr wide 1.65 mtr long matching your sheet profile weight 8Kg Approx), (Centre width - 800mm+/-5mm), (Dia of Bottom Ring- 600mm+/-15mm), (Nos of Bearings -02 Nos), (Bearing Type : skf-6001ZZ & 6003ZZ) (Rivets-Aluminium Alloy wiht Washer) Make:- Tubro Ventilator India (Industrial Ventilating Solutions) or Equivalent. | 8 | EACH | |
| 45 | 45 | M&L Earthing complete with Galvanised Steel Earth Plate Electrode 600x600x6mm, buried directly in ground vertically to a depth not less than 2.25 Metre below Ground Level with Top Edge of Earth Plate at depth not less than 1.50 Metre below normal Ground Level, connected to Galvanised Earth Strip 25X4mm as earth lead by means of Bolts, Nuts, Check Nuts and Washers of GI or Steel and Earth Wire protected with and including GI Pipe 32mm bore (dia) ‘light grade’ upto 1.0 Metre above the Floor Level of Building where Main Switch/DB situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc 150mm thick PCC Pit in Cement Concrete 1:3:6 (20 mm graded aggregate) and Pre-cast RCC Cover Slab of size 350x350x50 mm in Cement Concrete 1:2:4 (20mm graded aggregate), reinforced with 8mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, Funnel with GI Watering Pipe 20mm bore (dia) ‘medium grade’ including necessary Excavation in Soft/Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on completion, complete all as specified and as directed. | 8 | EACH | |
| 46 | 46 | Taking down Aluminium strip of any description including saddles, screws, test point terminal block etc from roof and wall, complete all as specified and directed. | 380 | RUNNING METRE | |
| 47 | 47 | S&F Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground, complete all as specified and directed. | 300 | RUNNING METRE | |
| 48 | 48 | Refixing serviceable Aluminium strip of size 25X3.15mm obtained from Item no. 44 with saddles and fixing screws etc. for roof conductors and down conductors above ground, complete all as specified and directed. | 80 | RUNNING METRE | |
| 49 | 49 | S&F Air termination, single pointed aluminium rod 12mm dia and 300mm long complete fixed with brazing including taking down old unserviceable air termination rod, complete all as specified and directed. | 12 | EACH | |
| 50 | 50 | S&F Porcelaine insulator of suitable size for proper securing to roof conductor of aluminium strip including dismantling of unserviceable insulator complete alll as specified and directed. | 380 | EACH |
AI Tender Summary
Tender Timeline
Jan 16, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 06, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 08, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender