Construction Of New Compost Shed In The Compost Yard For Ifgtb , Coimbatore . Construction Of Compost Shed In The Compost Yard ( Fabrication Works ) For Ifgtb , Coimbatore .
Tender Value
4.94 Lakhs
Estimated cost
Bid Submission
04 Feb 2020
0 days left
EMD
9880
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Institute of Forest Genetics and Tree Breeding,CBE → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of New Compost Shed In The Compost Yard For Ifgtb , Coimbatore . Construction Of Compost Shed In The Compost Yard ( Fabrication Works ) For Ifgtb , Coimbatore .
BOQ
| Name of Work: Construction of New Compost Shed in Compost Yard, Bio-Prospectig Division, IFGTB. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes | item1 | 1368.26 | Kg |
| 2 | 2 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | item2 | 328.34 | m2 |
| 3 | 3 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns | |||
| 4 | 3.1 | Gutter (600 mm over all girth) | item3 | 28 | RM |
| 5 | 4 | Manufacturing supplying and fixing of MILD STEEL DOOR made out of 40 x 40 x 6 mm M.S angle for outer frame,35 X 35 X 6mm M.S.Angle for outer frame of shutter. Bottom 1/3rd portion of the shutter area shall be covered with CRC sheets ( 18 G ) and provided with required locking facilities,hinges etc., Top 2/3rd portion will be covered by M.S.Grill at 9Kg/ Sqm. and the section will confirm to IS: 7452 OF 1982.The 1No,of stiffners using M.S.Flats of size 25 X 6mm at equal intervals horizontally. The corners of the frames and shutter with CRC sheets shall be welded by adopting flash butt welding or any other suitable method. Provision towards 3Nos, of Hinges incase of single shutters / 6Nos,of Hinges incase of Double shutters of 125 X 31 X 1.25mm size placed at appropriate intervals and provisions shall be made for Tower bolts 2Nos, Aldrop 1No. The frame shall be provided with 6Nos,of Hold fast of 200mm length using 50 X 6mm M.S.Flat. The entire frame and shutter shall be provided with one coat of red oxide primer including cost of hold fasts,hinges, locking arrangements, handles wind appliences etc., | item4 | 5.28 | m2 |
| 6 | 5 | Manufacturing, supplying and fixing in position fully GLAZED STEEL WINDOWS with openable shutters, outer frames and shutter frames shall be made out of steel sections conforming to I.S. 7452/1990 of different sizes as per the specifications given below:- The outer frames and shutter frames of windows made out of ‘Z’ section (F.7 D) of size 25mm x 20mm x 3mm and conforming to I.S.7452/1990. Mullions are made out of (F.4 B) ‘J` section of size 46mm x 25mmx 3mm and conforming to I.S.7452/1990. The shutters are individual and each of them can be operated separately. Sash bars are made out of ‘T’ sections (T2) of size 25mm x 22mm x 3mm . Two numbers of sturdy hinges and one number of handle cum latch of special type are fitted in each openable shutter.Suitable opening is left for its easy operation. One number of window adjustable string with fixing bracket of sufficient length are provided for each shutter. Four numbers of 40mm x 40mm x 3mm angle holdfasts of 230m m length shall be welded to the outer frames at appropriate point | item5 | 4.32 | m2 |
| 7 | 6 | Service Taxes/ GST If any | item6 | 1 | Nos |
AI Tender Summary
Tender Timeline
Jan 20, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 04, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 05, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender