Tender For Provision Of Single Living Accn For Jcos At Leimakhong Mil Stn
Tender Value
13.70 Lakhs
Estimated cost
Bid Submission
08 Feb 2020
0 days left
EMD
27200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
LEIMAKHONG → Manipur
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Provision Of Single Living Accn For Jcos At Leimakhong Mil Stn
BOQ
| Name of Work : Provn of single living accn for JCO's at Leimakhong Mil Stn | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Repair to B/R work | |||
| 2 | 2 | Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and as directed. | 60 | Sqm | |
| 3 | 3 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed. \n\n | 20 | Cum | |
| 4 | 4 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cms thick in soils complete all as specified and as directed. | 8 | Cum | |
| 5 | 5 | M&L for Hardcore of broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. | 12 | Cum | |
| 6 | 6 | Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. | 20 | Cum | |
| 7 | 7 | M & L for PCC M-7.5 grade (Nominal mix) using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed. | 3 | Cum | |
| 8 | 8 | M&L for PCC M-15 grade (Nominal mix) using 20mm graded crushed stone aggregate in coping complete all as specified and directed. | 0.5 | Cum | |
| 9 | 9 | M&L for PCC M-10 grade (Nominal Mix) using 20mm graded crushed stone aggregate as in holdfast incl necessary formwork complete all as specified and directed. | 0.1 | Cum | |
| 10 | 10 | M&L for Reinforced cement concrete (nominal mix) type M 15 grade using 20mm grade stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. | 1 | Cum | |
| 11 | 11 | Supply only intergral water proofing compound. | 1.2 | Kg | |
| 12 | 12 | M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) complete all as specified and directed. | 18 | Cum | |
| 13 | 13 | M & L for brick work with sub class ‘B’ brick, old size (locally available best quality) straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed. | 8 | Sqm | |
| 14 | 14 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat, rough finished surface of concrete complete all as specified and directed. | 18 | Sqm | |
| 15 | 15 | Use and waste of formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide, flat, rough finished surface of concrete complete all as specified and directed. | 12 | Sqm | |
| 16 | 16 | M&L for well seasoned 2nd class hard wood in scantling, clean sawn timber framed work complete all as specified and directed. | 1.47 | Cum | |
| 17 | 17 | S&F 2nd class hardwood, plain, solid, straight chowkhats and frame wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed. | 0.25 | Cum | |
| 18 | 18 | M&L for 30 mm thick well seasoned 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats complete all as specified and directed. | 15 | Sqm | |
| 19 | 19 | M&L for 35 mm thick well seasoned 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats complete all as specified and directed. | 4 | Sqm | |
| 20 | 20 | S&F plain, framed, Flush shutters 35mm thick second class Hard wood (any number of panels), with panels of timber flat on both sides (feather edge), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed. | 4 | Sqm | |
| 21 | 21 | S&F 2nd class harwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each | 24 | Each | |
| 22 | 22 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. | 3.6 | Sqm | |
| 23 | 23 | S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. | 9.8 | Rm | |
| 24 | 24 | S&F 150mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed. | 10 | Each | |
| 25 | 25 | S&F 100mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed. | 50 | Each | |
| 26 | 26 | S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and as directed. | 2 | Each | |
| 27 | 27 | S&F 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed. | 15 | Each | |
| 28 | 28 | S&F 50mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed. | 24 | Each | |
| 29 | 29 | S&F 150mm long alumiunium handles cast type anodised complete all as specified and directed. | 10 | Each | |
| 30 | 30 | S&F 100mm long alumiunium handles cast type anodised complete all as specified and directed. | 24 | Each | |
| 31 | 31 | S&F harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed. | 9 | Rm | |
| 32 | 32 | S&F brass chromium plated, 600mm long between flanges tubular towel rail , 20mm dia, D type. fixed with and including chromium plated brass screws and wooden/ plastic cleats, complete all as specified and directed. | 2 | Each | |
| 33 | 33 | S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length of cover plate 140mm, fixed in floor complete all as specified and directed. | 4 | Each | |
| 34 | 34 | S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width or aperture 1.18mm complete all as specified and directed. | 12 | Sqm | |
| 35 | 35 | S & F mild steel flat iron as in hold fast including screwing or welding conforming to Fe-290 Gde-E-165 and all as specified &directed\n | 1 | Kg | |
| 36 | 36 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long, diameter of neck 5 to 10 mm complete all as specified and directed. | 2 | Kg | |
| 37 | 37 | M&L for TMT bars 10mm dia and over cut to length, bent to shape as required including cranking, bending and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and directed. | 125 | Kg | |
| 38 | 38 | Ditto as per items No 37 but 5mm and over upto & incl 10mm dia in stirrups,spaces and binders. | 70 | Kg | |
| 39 | 39 | M&L for rolled mild steel structural works as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to .Fe 290 -W (Gde- E- 165) quality- A complete all as specified and directed. | 400 | Kg | |
| 40 | 40 | M&L for rolled mild steel structural works as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to .Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed. | 950 | Kg | |
| 41 | 41 | M&L for rolled mild steel structural works as framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel\nsheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to .Fe 290 -W (Gde- E- 165) quality- A complete all as specified and directed. | 15 | Kg | |
| 42 | 42 | S&F 0.63mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip, wall cladding and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed. | 59 | Sqm | |
| 43 | 43 | S&F Pre- painted galvalume aluminum zinc coating GI based semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. | 125 | Sqm | |
| 44 | 44 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. | 8 | Sqm | |
| 45 | 45 | M & L for 4mm thick plywood (no of ply 03), grade BWR, type BB, fixed with nails to timber frame work in walls complete all as specified and directed. | 40 | Sqm | |
| 46 | 46 | S&F exposed GI powder coated snap grid frame work for false ceiling of grid size 600 x600mm comprising of wall/cleat angle of size 25 x25 x0.35mm and main/cross tee of size 24 x38 x0.70mm with 4mm dia GI wire as suspender and including 4mm thick Plain E-Board including fixing arrangement from steel truss of any type and applying two coats of oil bound distemper over one coat of chalk whiting complete all as specified and directed. | 61 | Sqm | |
| 47 | 47 | M&L for 75mm thick PCC M-10 grade (Nominal mix) using 40mm graded stone aggregate as in plinth protection finishing surfaces even and smooth without using extra cement complete all as specified and directed. | 22 | sqm | |
| 48 | 48 | M&L for 75mm thick PCC M-7.5 grade (Nominal mix) using 40mm graded crushed stone aggregate as in sub base, finishing the surface even and rough complete all as specified and directed. | 54 | Sqm | |
| 49 | 49 | M&L for 40mm thick PCC M-15 grade (Nominal mix) using 20mm graded crushed stone aggregate as in sub base, finishing the surface even and rough complete all as specified and directed. | 54 | Sqm | |
| 50 | 50 | S&F 350 x 250 x 7 mm / 450 X 350 X 7mm thick coloured glazed ceramic tiles in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed. | 20 | Sqm | |
| 51 | 51 | M&L coloured non-skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. | 10 | Sqm | |
| 52 | 52 | M&L coloured non-skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. | 54 | Sqm | |
| 53 | 53 | M&L rendering 15mm thick on other than fair faces of brick work or concrete surface in cement mortar( 1:4 )using water proofing compound @2% by weight or cement as per manufacture instruction and finishing the surface even and smooth without using extra cement complete all as specified and directed..\n[Note:(i) WPC will be measured and paid separately\n(ii) Using Dimapur Sand] | 12 | Sqm | |
| 54 | 54 | M&L rendering 20mm thick on other than fair faces of brick work or concrete surface in cement mortar (1:3) using water proofing compound @2% by weight or cement as per manufacture instruction and finishing the surface even and smooth without using extra cement complete all as specified and directed..\n[Note:(i) WPC will be measured and paid separately\n(ii) Using Dimapur Sand] | 8 | Sqm | |
| 55 | 55 | M & L for rendering 10mm thick plaster in cement mortar (1:6) on fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Using Dimapur Sand) | 15 | Sqm | |
| 56 | 56 | M & L for 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes etc complete all as specified and directed. | 64 | Sqm | |
| 57 | 57 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of whitewash complete all as specified and directed. | 12 | Sqm | |
| 58 | 58 | M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and directed. | 15 | Sqm | |
| 59 | 59 | S&F sheet glass 3mm thick, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and as directed. | 10.4 | Sqm | |
| 60 | 60 | M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces complete all as specified and directed. | 40 | Sqm | |
| 61 | 61 | M&L for preparing of new wooden surfaces of any description and girth, not otherwise described and treated with a coat of creosote oil complete all as specified and directed. | 59 | Sqm | |
| 62 | 62 | M&L for prepraration of new surfaces or previously untreated of steel of any description, over 10 cm in width or girth, not otherwise described and including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. | 80 | Sqm | |
| 63 | 63 | M&L for prepraration of new surfaces or previously untreated of steel of any description, over 10 cm in width or girth, and applying a coat of red oxide primer complete all as specified and directed. | 60 | Sqm | |
| 64 | 64 | M&L for preparation of new zinc (or galvanised) surfaces to receive painting by coating with mordant solution including washing and cleaning etc and applying two coats synthetic (red) roof paint over a coat of red oxide primer complete all as specified and directed. | 59 | sqm | |
| 65 | 65 | S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. | 15 | Rm | |
| 66 | 66 | S&F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. | 25 | Rm | |
| 67 | 67 | S & F bib taps(ISI marked), cast copper alloy, chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for15mm dia iron pipe or for brass ferule complete all as specified and directed. | 2 | Each | |
| 68 | 68 | S&F pillar taps(ISI marked) , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks for15mm dia iron pipes and fixed complete all as specified and directed. | 2 | Each | |
| 69 | 69 | S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall as in waste/soil pipe complete all as specified and directed. | 10 | Rm | |
| 70 | 70 | S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall as in waste/soil pipe complete all as specified and directed. | 15 | Rm | |
| 71 | 71 | S&F 110mm bore PVC (SWR) bends complete all as specified and directed. | 2 | Each | |
| 72 | 72 | S&F 75mm bore PVC (SWR) bends complete all as specified and directed. | 2 | Each | |
| 73 | 73 | S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. | 2 | Each | |
| 74 | 74 | S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. | 2 | Each | |
| 75 | 75 | M&L for PVC (SWR) vent cowl of bore 75mm complete all as specified and directed. | 2 | Each | |
| 76 | 76 | S&F 75mm dia PVC (SWR) floor trap, plain with grating including setting and jointing with solvent cement complete all as specified and directed. | 2 | Each | |
| 77 | 77 | S&F in vitreous china squatting pan “Orissa pattern of size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including lime concrete bedding complete all as specified and directed.\n\n | 2 | Each | |
| 78 | 78 | S&F in PVC low level flushing cistern, white, 10 ltrs capacity, valveless, syphonic action type including all fittings and flush pipe, PVC connection pipe 600mm long 15mm bore with brass heads and washers all complete as specified and directed. | 2 | Each | |
| 79 | 79 | S&F vitreous china wash hand basin white flat back of size 450x300mm including brackets, cutting for and pinning in ends of brackets or erecting stands also including 32mm dia brass chromium plated waste coupling, PVC waste pipe and 15mm dia PVC connection pipe 450 mm with brass nuts complete all as specified and directed. | 2 | Each | |
| 80 | 80 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. | 2 | Each | |
| 81 | 81 | M&L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed. | 1 | X Rm | |
| 82 | 82 | E/M work | |||
| 83 | 83 | Material and labour for point wiring surface type with two single core 1.5 Sq mm (nominal area) FRLS PVC insulated and unsheathed, multi-stranded, copper conductor cable in and including suitable size PVC casing capping with all fittings and fixing accessories and suitable size PVC box for mounting switches, regulator etc including multi-strand PVC insulated unsheathed stranded copper cable as earth continuity conductor of size 1.5 Sq mm and connecting to light fitting/fans etc complete all as specified and directed for following :- (Colour code to be followed) | |||
| 84 | 83.01 | One light/fan point controlled by one, one way switch | 14 | Point | |
| 85 | 83.02 | One celling/exhaust fan point controlled by one, one way switch | 4 | Point | |
| 86 | 83.03 | One socket outlet 5 Amps 5 pin on independent board | 8 | Point | |
| 87 | 83.04 | One socket outlet 5 Amps 5 pin on same board | 4 | Point | |
| 88 | 84 | All as per item No. 83 here in before but with cable size 2.5 Sqmm and earth continuity conductor of 2.5 Sqmm size for one 5 pin 15 Amps socket out let on independent board complete all as specified and directed. | 4 | Point | |
| 89 | 85 | S&F modular switch piano, 6 Amps, single pole, one way complete all as specified and directed. | 30 | Each | |
| 90 | 86 | S&F modular socket outlet 2/3 Pin 6 Amps combined 2 module complete all as specified and directed. | 12 | Each | |
| 91 | 87 | S&F modular socket multipurpose 3 pin 16 Amps and 3 pin 6 Amps combined 2 module complete all as specified and directed. | 4 | Each | |
| 92 | 88 | S&F Ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and directed. | 4 | Each | |
| 93 | 89 | S&F modular switch piano, 16 Amps, single pole, one way complete all as specified and directed. | 4 | Each | |
| 94 | 90 | S&F modular white cover with frame for fixing of 12 module. | 2 | Each | |
| 95 | 91 | S&F modular white cover with frame for fixing of 4 module. | 12 | Each | |
| 96 | 92 | S&F modular white cover with frame for fixing of 2 module. | 2 | Each | |
| 97 | 93 | S&F blank spacer plate for single module. | 4 | Each | |
| 98 | 94 | S&F modular electronic fan regulator rotary stepped type 120W, 240V, single phase, two module and connecting up complete all as specified and directed. | 2 | Each | |
| 99 | 95 | S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 8 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door verticle for breaking capacity 10 KA complete all as specified and directed.\n(Make: Havells cat part No. DHDPSHODRW 08 or as per list approved makes enclosed hereinafter) | 1 | Each | |
| 100 | 96 | S&F MCB single pole and neutral 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed. | 1 | Each | |
| 101 | 97 | S&F MCB single pole 06 to 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed. | 6 | Each | |
| 102 | 98 | S&F PVC Board (30 x 25 x 5) cm depth medium quality ISI marked complete all as directed. | 1 | Each | |
| 103 | 99 | S&F universal batten for G13 T8 lamps (LED TUBE),1200mm long complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. \n(Make: Havells Regal Batten Cat No.REGALBATTENT8UPTO1X22WSSBSWH or equivalent in Philips/ Bajaj/ Crompton) | 10 | Each | |
| 104 | 100 | S&F ultra bright LED polycarbonate tublight 20W, 1213mm long with very high efficacy suited for installation T8 tublight with G13 lamp holders, complete with all accessories complete all as specified and directed.\n(Make: Photon Ultra LED tubelight Havells CatNo.PHOTONULTRA1213T8SSTL20WLED865SPC or equivalent in Philips / Bajaj / Crompton) | 10 | Each | |
| 105 | 101 | M&L for Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendent/Angle type including one 10W LED complete all as specified and directed. | 2 | Each | |
| 106 | 102 | S&F Service wire PVC insulated and PVC sheathed stranded Aluminium conductor 10 sq mm 2 Core fixed to walls or suspended by insulating hanger not more than one meter apart including 4mm dia GI suspension wire and binding with 2mm dia new GI wire with reel insulator complete all as directed. | 80 | Rm | |
| 107 | 103 | S&F metal exhaust fan AC single phase 230 volts of size 300mm sweep with louvre complete fixed and opening of wall with suitable MS bolts, grouted to wall and connecting up including provision of cable from connector to fan with flexible cable 24/0.2mm with copper conductor and necessary fitting complete all as specified and directed. (Make: Crompton Model No Drift Air 12' or equivalent in Havells/Bajaj/Usha) | 2 | Each | |
| 108 | 104 | S&F ceiling fan, 1200mm sweep, 3 blade with 5 star rated standard super silent motor including provision of 3 core flxible copper conductor cable of size 23/0.19 from ceiling rose to ceiling complete complete all as specified and directed. (Make: Crompton Model No Entrust 50 or equivalent in Bajaj/Usha/Havells) | 2 | Each | |
| 109 | 105 | S&F building security light fitting new generation energy saving & environmental friendly long life versatile pressure die cast aluminium IP-66 high power LED light 20 watt including suitable size of wall bracket and connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. \n(Make: Havells Endura Pearl Cat No. ENDURAPEARLSL20WLED757SASYTOPC or equivalent in Bajaj/Philips/Crompton) | 2 | Each | |
| 110 | 106 | Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized earth wire 4mm dia by means of galvanized iron or steel bolts nuts check nuts and washers and other end connected with earthing testing point including providing suitable testing points as directed including funnel, watering pipe of 20mm bore, light grade galvanized iron pipe, wire mesh charcoal of coal dust and common salt in alternative layer all around the earth electrode compacted thickness 15cm with concrete pit in PCC 1:3:6 type C1 50mm thick pre cast RCC 1:2:4 type B1 cover slab set in CM (1:4) re-enforcement with 8mm dia deformed bars @ 15cm C/C and suitable handle of 10mm dia MS round bars, including earth work in hard/dense soil as required complete all as shown in electrical plate No 3 of MES Schedule Part I and testing on completion all as specified and as directed.(Note:Earth strip beyond 7.5 m length will be measured & paid separately) | 1 | Each Set |
AI Tender Summary
Tender Timeline
Jan 16, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 08, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 11, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender