Renovation Of Park Of Palika Colony ( Opp Jitender Vakil House ) And Providing And Fixing Of Open Gym Swings And Benches In Ward No 15 Bahadurgarh
Tender Value
12.98 Lakhs
Estimated cost
Bid Submission
11 Feb 2020
0 days left
EMD
26000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
BAHADURGARH → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Of Park Of Palika Colony ( Opp Jitender Vakil House ) And Providing And Fixing Of Open Gym Swings And Benches In Ward No 15 Bahadurgarh
BOQ
| Name of Work: Renovation of park of Palika Colony & Providing & Fixing open Gym Swings Benches in Ward no. 15 | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth filling from 8Km Lead. | 800 | Cum | |
| 2 | 2 | Cement Concrete 1:4:8 with stone aggregate 40mm nominal size in foundation and plinth. (H.S.R 10.39) | 1.52 | Cum | |
| 3 | 3 | First Class bricks works 1:5 in F/P (HSR 11.3) | 23.7 | Cum | |
| 4 | 4 | Plastering on wall: 12 mm thick cement plaster 1:4 (15.5) | 131.86 | Sqm | |
| 5 | 5 | Cement Concrete 1:6:12 with stone aggregate 40mm nominal size in foundation and plinth H.S.R. no. 10.32 | 10.96 | Cum | |
| 6 | 6 | Cement Concrete 1:1.5:3 in F/P (H.S.R 10.132+10.95a) | 10.96 | Cum | |
| 7 | 7 | Wrought iron and mild steel (using angles, flats, square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors open able or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position (HSR 18.12) | 12 | Qtl | |
| 8 | 8 | Finishing walls with exterior decorative cement based paints such as snowcem, Robbiacem etc. on new work, two coats to give an even shade.(HSR 16.61) | 200 | Sqm | |
| 9 | 9 | Painting two coats excluding priming coat with ready-mixed paint for metallic surfaces in all shades on new steel or iron work. (HSR 16.17) | 25 | Sqm | |
| 10 | 10 | Providing & Laying of Grass Carpet (N.S.) | 250 | Sqm | |
| 11 | 11 | Providing & Fixing of R.C.C. Benches | 15 | Nos. | |
| 12 | 12 | Providing & Installation Sumersible Pump (N.S.) | 1 | Nos. | |
| 13 | 13 | WalkerTubular metal pipes of 2.46 mm thickness galvanized and zinc coated. Robotic Welding of Joints is doneMetal: All tubular steel of 2.5mm thickness are galvanized and zinc dipped. Joints are Robotic welded with MIG Process. Sharp edges, oints and blurs from all joints are removed. Zinc Paint is applied at all the welded areas before finishing. AKZO Nobel- Great Wall powder is applied to all metal parts to the thickness of 80-120 microns. Testing of all metal parts is done in salt spray machine with 5% NaCl solution in accordance to ISO7227 to speed up corrosion for 3000 hrs. Colour RAL 5019 Blue and RAL 1014 Beige. Plastic: Base plate cover- Solid polyethylene, UV-stabilized. All plastic parts are tested in our UV Climate Chamber and our Constant Temperature and Humidity Test Chamber reaching temperature of – 30 to 60 degrees C and between 20% and 98% humidity. Testing last 3000 hours in both machines Colour: RAL 3000 Flame Red. Footplates have high thermal stability and are made of nylon alloys which provides them high ductility and toughness. Mantainance -free ball bearings . Pre Assembled equipment modules will be delivered. Excellent thigh and hips work out without risk to knee joints. Air Walker is somewhat similar to a rowing but in a more upright position, the walker helps to achieve full -body cardiovascular and toning work-out, pushing with the legs while pulling with the arms Note: Made by superior quality of following makes wonder bloom, SNS Mediquip, ArihantAge Group:-MAXIMUM USER WEIGHT - 120KG | 1 | Each | |
| 14 | 14 | AREIAL STEOLLER AREIAL STEOLLER with Product Dimension(LXWXH) 3'2\" X 1'8\" X5' 5\" .Fabricated main post of 117mm and 2.6mm thick and rest of the pipe of 60mm / 39 / 32mm dia and thickness of 2.5mm pipes made by using hot rolled tubular steel. Hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 121mm micron thick. Joints in the equipment are wekded with robotic technique and necessary dressing up is done to remove shar edges and blurs. Zinc primer paint is applied on all welding points prior to finishing. Foot oedal are made of nylon alloy with rounded edges for maximum prevention of injury and the base plate is covered with LLDPE. IT is manufactured rotational moulding with minimum thickness of plastic of 8mm, colorful and UV resistant and enviromnental friendly. Maintainance free bearings , duly oil sealed and self lubricated. INbuilt limter fitted in the equipment to prevent unwanted equipment. Al ll open ends of pipe to be closed by LLDPE caps for user friendly. The equipment can be placed on ground with concrete of minimum strength M-25 and J shapedwelded bolt and ones the concrete us set, fix the equipment on to it and cover nuts and bolts wih the base plate. Note: Made by superior quality of following makes - wonder bloom or SNS Mediquip or Arihant. \nAge Group:-MAXIMUM USER WEIGHT - 110KG | 1 | Each | |
| 15 | 15 | Leg Press Double Product Dimension(LXWXH)6'8\" X 3'2\" X6' 7\". Fixed Designed chest press with the main post of of 114m and 2.5mm thick and the remaining pipes made of hot rolled tubular steel of 60 and 32mm diameter with thickness of 2.5mm pipes. Dipped hot and galvanized with powder coating using Akzo Nobel or equivalent of 80 - 120mm micron thick. All piped joints are weded usign robotic welding technique. Dressing up to remove sharp edges and blurs is done along with zinc primer painting prior to final finish. Foot pdeals are made of nylon allots and have rounded edges for maximum orevention of injury. Plastic- Virgin LLDPE made by rotational moulding with minimum thickness of plastic of 8mm, colorful and UV resistant used for seats and base plate cover. High quality rubber used for making of handgrips. Maintaince free, oil sealed and self lucrication bearing is used. Inbuilt movement limited fitted along with the finshed product to prevent unwanted movement. LLDPE material to be used to close all the open ends of pipes. The equipment can be placed on ground using concrete of minimum strength M-25 and J shaped welded bolt and ones the concrete us set, fix the equipment on to it and cover nuts and bolts wih the base plateNote: Made by superior quality of following makes - wonder bloom or SNS Mediquip or Arihant. \nAge Group:-MAXIMUM USER WEIGHT - 110KG | 1 | Each | |
| 16 | 16 | scated twisted scated twisted with Product Dimension(LXWXH) 4'0\" X 3'7\" X4' 5\".Fabricated main post of 114 mm with 2.5mm thickness made using hot rolled tubular steel and rest of the pipe of 32mm thickness of 2.5mm pipes .Hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120mm micron thick. Each joint in the quipment is weded with robotic welding technique and sharp edges and blurs are removed with appropriate dressing. Zinc primer painting at all weding pints before final finish. LLDPE material to be used for coating on open pipe ends. The equipment can be placed on ground with concrete of minimum strength M-25 and J shaped welded bolt and ones the concrete us set, fix the equipment on to it and cover nuts and bolts wih the base plateNote: Made by superior quality of following makes - wonder bloom or SNS Mediquip or Arihant. \nAge Group:-MAXIMUM USER WEIGHT - 110KG | 1 | Each | |
| 17 | 17 | Areo Rider Set Tubular metal pipes of 2.5 mm thickness galvanized and zinc coated. Robotic Welding of Joints is doneMetal: All tubular steel of 2.5mm thickness are galvanized and zinc dipped. Joints are Robotic welded with MIG Process. Sharp edges, oints and blurs from all joints are removed. Zinc Paint is applied at all the welded areas before finishing. AKZO Nobel- Great Wall powder is applied to all metal parts to the thickness of 80-120 microns. Testing of all metal parts is done in salt spray machine with 5% NaCl solution in accordance to ISO7227 to speed up corrosion for 3000 hrs. Seat and Base plate cover made with Solid polyethylene, UV-stabilized. All plastic parts are tested in our UV Climate Chamber. Product Dimension(LXWXH)3'1\" X 1'10\" X3'10 0\"Note: Made by superior quality of following makes wonder bloom, SNS Mediquip, ArihantAge Group:-MAXIMUM USER WEIGHT - 120KG | 1 | Each | |
| 18 | 18 | Providing and Fixing of High Mast Poles and Lights (Analysis Attach) | 1 | Nos |
AI Tender Summary
Tender Timeline
Jan 17, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 11, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 12, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender