Supply Of Loto System Material -2 Miniature Circuit Breaker Lock Out Pin-In *Purpose: Isolating Mcbs *Moc:Glass-Filled Nylon *Size: Standard *Features:It Has 1 ) A Tensile Strength Of 400-500 Kg / Cm2 2 ) 5% Elongation At Break 3 ) A Flex Strength Of 900-1000 Kg / Cm2 4 ) An Izod Impact Strength Notched At 5.5-6.5 Kg / Cm2 5 ) A Heat Deflection Temperature @ 18.5 Kg / Cm2 Of 165°C *Group Lockout Possible *Storage Temperature Atmospheric *This Product Shall Be Tested & Validated As Per Osha 29Cfr1910.147@ ( 4 ) ( Ii ) & Ansi Standard Z244 3 Miniature Circuit Breaker Lock Out Pin-Out *Purpose: Isolating Mcbs *Moc: Glass-Filled Nylon *Size: Standard *Features:It Has 1 ) A Tensile Strength Of 400-500 Kg / Cm2 2 ) 5% Elongation At Break 3 ) A Flex Strength Of 900-1000 Kg / Cm2 4 ) An Izod Impact Strength Notched At 5.5-6.5 Kg / Cm2 5 ) A Heat Deflection Temperature @ 18.5 Kg / Cm2 Of 165°C *Group Lockout Possible *Storage Temperature Atmospheric *This Product Shall Be Tested & Validated As Per Osha 29Cfr1910.147@ ( 4 ) ( Ii ) & Ansi Standard Z244 4 Standard Acrylic Lockable Key Board Cover For 30 Keys Nsize: 410 X 500Mm Art No. Akb 30 Or Equivalent Make : Alkosign / Ncorporate Concepts. N 5 Safety Steelpadlock With Master Keyed Keying Facility.Each Lock Shall Open From A Different Key And Also From A Unique Master Key. Shackle: Compact, Light Weight Superior Corrosion & Chemical Resistance. Non-Conductive, Spark Resist Ant Lock Body, Insulated Chamber, Key Retaining Lock In Open Position 6 Pin Cylinder For Better Tamper Resistance. Shackle Made From Steel Lock Body Made From Polyamide Nylon-66.Shackle Diameter & Clearance 1 / 4’’ & 1 1 / 2 ’’ Lock Body: ( Wxdxh ) : 38 X 21 X 44.5 Mm ( 1.5X0.8X1.75 ) ;Ul Rating: Ul-94-Hb ( Plastic Component Only ) ; Service Temperature:-20C To 120C; Padlock Tested For Corrosion Resistance ( En13230 Guidelines ) Tested & Validated As Per Osha 29Cfr1910.147@ ( 4 ) ( Ii ) & Ansi Standard 6 Multipurpose Industrial Electrical Safety Lockout Device-I, Material Abs Nplastic And Mild Steel Plate , Size Of Yellow Base Part 53*51 Mm Metal Npart 78*40Mm, But Cantilever Part From Base 40*40 *23 Mm ( Center Nheight ) , Base Part Can Be Fixed By Double Sided Tape And Screw, With Nrequired Screw 20Mm Long, Cat No:Krm-K-Miesld-I Or Equivalent N 7 Multipurpose Industrial Electrical Safety Lockout Device-Ii, Material Abs Nplastic And Mild Steel Plate , Size Of Yellow Base Part 53*51 Mm Metal Npart 80Mm*40 Mm, But Cantilever Part From Base 32*32Mm Aprox , Base Part Ncan Be Fixed By Double Sided Tape And Screw, With Required Screw 20Mm Nlong, Cat No:Krm-K-Miesld-Iii Or Equivalent N 8 Multipurpose Industrial Electrical Safety Lockout Device-Iii, Material Nabs Plastic And Mild Steel Plate , Size Of Yellow Base Part 53*51 Mm NMetal Part 98Mm, But Cutout Cantilever Part From Base W*H:52*60Mm, Ncutout Center / Top Width 25 / 21Mm, Base Part Can Be Fixed By Screw, With Nrequired Screw 20Mm Long, Cat No:Krm-K-Miesld-V Or Equivalent N 9 Round Dielectric Lockout, Abs Body Material, Riveting Two Pieces Can Nbe Easily Rotated In Any Direction, Outer Dia 46Mm, Inner Dia 32Mm Upper Npart Thickness 3Mm, Lower Part Thickness 5Mm, Locking Hole Dia 7Mm Yellow Ncolur, Base Part Can Be Fixed By Double Sided Tape And Screw, With Nrequired Screw 20Mm Long, Cat No -Krm-K-Rsdel Or Equivalent N 10 Electrical Panel Handle Lockout, Material:Abs Base With Strong Npolypropylene Strip Used To Block Handle Movement, Base Dai 59Mm Nthickness 10Mm, Slotter Part Size 25*18*7Mm Plastic Grip, Strip Length N435mm, Width 19Mm, With 9Mm Multiple Holes, Base Part Can Be Fixed By Screw Nwith Required Screw 20Mm Long, Cat No:Krm-K-Dehlp-Wpl Or Equivalent N 11 Emergency Stop Switch Lockout, Material:Polypropylene With Identification Nlabel, Designed To Fits Over Button And Prevent It By Accidental Noperation, With Group Isolation Provision, Outer Size:80*40.5 Mm, Inner Nsize: 70*30Mm, Can Be Used Without Removing Wiring & Button, Cat No:Krm- Nk-3Esspbl-Ror Equivalent N 12 Electrical Panel S / W Lockout Round, Material: Strong Polycarbonate Body Ncombination Of Lower Square And Upper Round Shape Parts With Group Nisolation Provision, Having Cut At 45 Degree Angle Side For On Lever Nouter Square Base:95*95Mm With Inner Dia 78Mm, Upper Round Dia 80Mm Ndepth 65Mm, Base Part Can Be Fixed By Double Sided Tape Or Screw With Nrequired Screw 20 Mm Long, Cat No -Krm-K-Epl-45-R Or Equivalent N 13 Electrical Panel S / W Lockout Round, Material: Strong Polycarbonate Body Ncombination Of Lower Square And Upper Round Shape Parts With Group Nisolation Provision, Having Cut At 90 Degree Angle Side For On Lever Nouter Square Base:95*95Mm With Inner Dia 78Mm, Upper Round Dia 80Mm Ndepth 65Mm, Base Part Can Be Fixed By Double Sided Tape Or Screw With Nrequired Screw 20 Mm Long, Cat No -Krm-K-Epl-90-R Or Equivalent N
