Military Engineer Services-MES has published Repair To Flooring Joinery Plumbing Fittings And Misc Works In Varunapuri Iii Under Age Br Ii Of Ge Nw Vasco. Submission Date for this Tender is 15-02-2020. Civil Work Tenders in CWE NAVY VASCO Goa. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 24-Jan-2020 | DATE CORRIGENDUM | Date | 08-02-2020 |
| 2 | 10-Feb-2020 | DATE CORR 2 | Date | 15-02-2020 |
| NAME OF WORK: REPAIR TO FLOORING , JOINERY , PLUMBING FITTINGS AND MISC WORKS IN VARUNAPURI III UNDER AGE B/R II OF GE (NW) VASCO | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and as directed. | 1350 | Sqm | |
| 2 | 2 | Taking down shutter exceeding 1 sq. m and not exceeding 2 sq. m each and refixing in same position all as specified and as directed. | 100 | per leaf | |
| 3 | 3 | M&L for glazed ceramic tiles, coloured of size 300 x 200 x 7 mm thick with on vertical surfaces such as dado, skirting etc, set and jointed in neat cement slurry and pointed in white cement to match all as specified and as directed. | 250 | Sqm | |
| 4 | 4 | M&L for non skid coloured tiles of 7 to 8mm thick and area of each tile exceeding 0.06 Sq m and not exceeding 0.11sqm in floors etc, set and jointed in neat cement slurry and pointed in/white/ coloured cement to match all as specified and as directed. | 400 | Sqm | |
| 5 | 5 | M&L for non skid coloured ceramic tile 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sq m but n exceeding 0.18 sq m, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed. | 700 | Sqm | |
| 6 | 6 | M&L for rendering 10 mm thick in cement mortar 1:4 on brick work/ concrete surface to receive tiles all as specified and as directed. | 250 | Sqm | |
| 7 | 7 | M&L for screed bed or bedding layer of mortar 15 mm thick to receive floor tiles in cement plaster 1:4 all as specified and as directed. | 1100 | Sqm | |
| 8 | 8 | M & L in repairs marble (Baroda green) work (table rubbed and polished) 18-20mm in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of marble all as specified and as directed. | 70 | SQM | |
| 9 | 9 | S&F 20 mm dia CPVC pipes SDR 11 Class 1 laid in trenches/walls outer including all fittings all as specified and as directed. | 180 | RM | |
| 10 | 10 | S&F 25 mm CPVC pipes SDR 11 Class 1 laid in trenches/walls outer including all fittings all as specified and as directed. | 150 | RM | |
| 11 | 11 | Taking down steel tubing/CPVC tubing & connections 15 mm bore and removing from the site all as specified and as directed. | 180 | RM | |
| 12 | 12 | Taking down steel tubing/CPVC tubing & connections 20 mm bore and removing from the site all as specified and as directed. | 150 | RM | |
| 13 | 13 | S & F in repairs PVC connections, 450 mm long with brass CP check nuts suitable for connecting 15 mm dia pipes, superior quality all as specified and as directed. | 50 | Nos | |
| 14 | 14 | S & F in repair PVC (SWR) floor trap plain with grating including jointing with solvent cement 75mm all as specified and as directed. | 50 | Nos | |
| 15 | 15 | S&F in repairs PVC waste pipe of 32mm/40mm dia for wash basin and kitchen sink all as specified and as directed. | 50 | Nos | |
| 16 | 16 | S&F in repairs vitreous china wash hand basin, white , flat back, size 600X480 mm white , excluding taps, waste pi, chain and plug and porcelain stopper but including brackets all as specified and as directed.. | 10 | Nos | |
| 17 | 17 | S&F in repairs water closet of size 580 x 440 mm vitreous china squatting pan, Orissa pattern white with "P" or "S" trap front or back inlet and integrated foot rest including provision of lime concrete bedding etc all as specified and as directed. | 10 | Nos | |
| 18 | 18 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe. Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. complete and Seat and cover for pedestal pan in replacement all as specified and as directed. | 10 | Each | |
| 19 | 19 | Treating and finishing the sunken portion of WC area not exceeding 1.2 Sqm each by providing 10mm thick rendering in cm 1:3 with and including water proofing compound and applying two coats of bitumen 85/25 @ 1.25 kg/sq m, providing necessary connection items suitable for WC, providing lime concrete and 1mm thick multi plus plastifelt over 20mm thick plain cement concrete 1:2:4 type B0 using 12.5 mm graded crushed trap stone aggregate complete all as specified and as directed. | 10 | Each job | |
| 20 | 20 | All as per item No 19 here in before but for bath/lobby with out any PVC connections/fitting, area exc 1.2 Sqm and n. exceeding 2 Sqm each all as specified and as directed. | 10 | Each job | |
| 21 | 21 | S & F PVC high level /low level flushing cistern, 10 Ltrs capacity including float valve , chain, PVC pipe including dismantling of old unserviceable flush tank all as specified and as directed. | 20 | Nos | |
| 22 | 22 | Supply only in repairs Pillar taps 15mm dia, cast copper alloy, fancy type with capstan heads, chromium plated ,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe all as specified and as directed. | 10 | Each | |
| 23 | 23 | S & F in repairs 15mm dia bib taps standard of PTMT any colour high pressure screwed for iron pipe (min weight 90 gms) all as specified and as directed. | 70 | Nos | |
| 24 | 24 | S &F in repairs 15mm stop valves PTMT any colour high pressure screwed for iron pipe (min weight 90 gms) all as specified and as directed. | 50 | Nos | |
| 25 | 25 | M&L for waste coupling of PTMT 32mm/40mm bore all as specified and as directed. | 25 | Each | |
| 26 | 26 | S & F in repairs 15mm dia angular stop cock standard of PTMT any colour high pressure screwed for iron pipe (min weight 90 gms) all as specified and as directed. | 25 | Nos | |
| 27 | 27 | S&F in repairs shower rose with shower arm 195mm long of PTMT any colour, for fixing to CPVC/steel pipe of 15mm bore all as specified and as directed. | 10 | Each | |
| 28 | 28 | M&L in repairs stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410 mm x 330 mm x 160 mm all as specified and as directed. | 25 | Nos | |
| 29 | 29 | S&F in repairs floor door stopper of aluminium alloy body with rubber shoe 75mm long all as specified and as directed. | 50 | Each | |
| 30 | 30 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and as directed. | 25 | Each | |
| 31 | 31 | S & F in repairs 20 mm , 600 mm long brass chromium plated towel rail all as specified and as directed. | 25 | Each | |
| 32 | 32 | S&F in repairs stainless steel curtain rails 19mm dia with brackets stop rollers etc all as specified and as directed. | 250 | RM | |
| 33 | 33 | S & F in repairs 15mm dia brass CP mixer for mixing hot & cold water screwed down for iron pipe all as specified and as directed. | 20 | Each | |
| 34 | 34 | S & F in repairs stainless steel 1mm thick plate rack of size 600mmx 750mm including fixing in walls with suitable screws wooden plugs including all necessary arrangement etc all as specified and as directed.. | 10 | Each | |
| 35 | 35 | Taking down chowkhat or frames exceeding 1.5 sqm but not exceeding 4 sqm each without taking of shutters from the frame and removing to store all as specified and as directed. | 50 | Each | |
| 36 | 36 | S&F 2nd class hard wood for plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and as directed. | 2 | Cum | |
| 37 | 37 | S&F second class H.W plane framed, factory made panelled shutter 35mm thick (three panel) with lock rail and panel of 9mm BWP commercial ply on both faces, size of stiles and rails as per IS 1003(Part-I) kiln seasoned and chemically pressure treated all as specified and as directed. | 80 | Sqm | |
| 38 | 38 | M&L for preparation of new painted wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over pink primer all as specified and as directed. | 180 | Sqm | |
| 39 | 39 | S & F Soild PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube all as specified and as directed. | 150 | RM | |
| 40 | 40 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall bw covered with heat moulded plain colour PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for tip rail & bottom rails; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement. supplying and fixing in the frame at site as per specification & drawing | 80 | Sqm | |
| 41 | 41 | S & F 150 mm long aluminium, anodised, barrel tower bolts of extruded section all as specified and as directed. | 100 | Each | |
| 42 | 42 | S & F 100 mm long extruded aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C 21 all as specified and as directed. | 150 | Each | |
| 43 | 43 | S & F 150 mm long extruded aluminium alloy handles, fabricated type, anodized all as specified and as directed. | 100 | Each | |
| 44 | 44 | S & F Aluminium alloy, anodised, sliding door bolt 300mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy all as specified and as directed. | 50 | Each | |
| 45 | 45 | M & L for cutting holes exceeding half brick but not exceeding one brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 all as specified and as directed. | 100 | Each | |
| 46 | 46 | S & F hold fast ,Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains ;hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 all as specified and as directed. | 270 | Kg | |
| 47 | 47 | S&F in repairs aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with aluminium wire staples to wooden/steel window/ventilator shutters all as specified and as directed. | 80 | Sqm | |
| 48 | 48 | Taking down cement plastering , including racking out joints, hacking for key, scrubbing down with water on walls/ceiling including lowering, removal of rubbish off the premises and leaving the surfaces clear of any plastering all as specified and as directed. | 1150 | Sqm | |
| 49 | 49 | M & L for rendering 5 mm thick in cement mortar 1:3 on ceiling/ soffits of slab, including finishing the surface even and smooth without using extra cement all as specified and as directed. | 400 | Sqm | |
| 50 | 50 | All as per Item No 49 here in before but 10 mm in cement mortar 1:6 on brick work or concrete surface of walls all as specified and as directed. | 750 | Sqm | |
| 51 | 51 | M & L for preparation of new plastered surface and applying two coats of distempering of wall with oil emulsion distemper over a coat of primer all as specified and as directed. | 750 | Sqm | |
| 52 | 52 | M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash all as specified and as directed. | 400 | Sqm | |
| 53 | 53 | M&L for complete removal of existing treatment of old plastered surface on ceiling and applying two coats of oil bound distember over a coat of primer all as specified and as directed. | 1000 | Sqm | |
| 54 | 54 | S&F in repairs PVC (SWR) pipe, 75 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors. all as specified and as directed. | 100 | RM | |
| 55 | 55 | All as per Item No 54 here in before but for 110 mm bore fixed to walls all as specified and as directed. | 100 | RM | |
| 56 | 56 | M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed. | 500 | Sqm | |
| 57 | 57 | Taking down chowkhat or frames not exceeding 1.5 sq m each without taking of shutters from the frame and removing to store all as specified and as directed. | 50 | Each | |
| 58 | 58 | S&F Aluminium powder coated window/ventilators shutter including frame, any type sliding or openable with frame, & other similar work etc. fabricated by using the JINDAL/HINDAL CO standard section including necessary arrangements to receive 4mm thick glass or wire mesh with aluminium channel beading & stainless steel screws including the cost of rubber gasket/rubber beading etc. complete including necessary handles, roller wheels, hinges etc complete all as specified and as directed.\nNote :- Weight of aluminium section shall be measured exclusive of all fittings fixtures, hinges, handle, bolts, rubber gasket/rubber beading and locking arrangements. | 500 | Kg | |
| 59 | 59 | S &F Aluminium powder coated grill model / design no DG 104 ( 10 mm thick ) with DL-102 frame all as specified and as directed.\nMake: Decogrill or equivalent as approved by GE. | 50 | Sqm | |
| 60 | 60 | M & L for preparation of old painted surface of wall and applying one coat of oil bound distemper with DL-102 frame all as specified and as directed. | 2000 | Sqm | |
| 61 | 61 | Taking down shutter exceeding 1 sq m and not exceeding 2 sq m each and removing to store all as specified and as directed. | 50 | per leaf | |
| 62 | 62 | S &F Sheet glass ordinary quality ,4 mm thick and glazing with oil putty /wooden / metal beads in squares not exceeding 5 Sq m each all as specified and as directed. | 20 | Sqm | |
| 63 | 63 | All as per Item No 62 here in before but exceeding 0.5 sqm each pane all as specified and as directed. | 50 | Sqm | |
| 64 | 64 | S&F second class H.W 35 mm thick glazed and skeleton shutters, (factory made), open rebated and prepared to receive glass guaze etc with sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members as specified in SSR part-I, section 8, clause 8.20(b) and fitted to chowkhats all as specified and as directed. | 50 | Sqm | |
| 65 | 65 | M&L for 18 mm thick single side prelaminated wooden grain solid PVC sheet suitably fixed in shelves, partition and shelves of built in cupboard almirahs book cases, toilet, boxes , racks, pelmet and similar work including all hardware fittings all as specified and as directed. | 40 | Sqm | |
| 66 | 66 | M&L for 12 mm thick single side prelaminated wooden grain solid PVC sheet suitably fixed in shelves, partition and shelves of built in cupboard almirahs book cases, toilet, boxes , racks, pelmet and similar work including all hardware fittings all as specified and as directed. | 30 | Sqm | |
| 67 | 67 | M&L for 18 mm thick both side plain wooden grain solid PVC sheet suitably fixed in shelves, partition and shelves of built in cupboard almirahs book cases, toilet, boxes , racks, pelmet and similar work including all hardware fittings all as specified and as directed. | 30 | Sqm | |
| 68 | 68 | M&L for removing the spalled concrete upto the sound core level and clean reinforcement with wire brush to remove loose scales, cleaning of the surface with wire brush and plenty of water so as to remove the loose particles, dust, laitance etc, and preparation of surface by application of rust remover on exposed reinforcement using rust remover of approved make, apply passivator coat using zinc primer of approved make on reinforcement Bars. Apply bond coat using "Epoxy bonding agent" on entire surface, when bond coat becomes tacky apply repair mortar (using universal polymerised repair mortars single pack like Pagel U40 or Micro concrete) in layers of 15mm and subsequently built up the required thickness (45mm) in subsequent layers of 15mm and finishing the final layer even and smooth as per manufacturers instruction and as directed. Make : M/s Pidilite Industrues Ltd or equivalent in M/S Krishna Conchem Products/ STP Ltd.\nNote: Application to be done by authorised applicators of the manufacture only. | 200 | Sqm | |
| 69 | 69 | M&L TMT steel bars 8 mm dia, cut to length, bent to shape required and welded to existing reinforcement of any description and any position of RCC structure after binding with mild steel wire annealed n less than 0.9 mm dia an additional bar all as specified and as directed. | 280 | Kg | |
| 70 | 70 | M&L Mild steel bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed. | 180 | Kg |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
