New Town Kolkata Development Authority-NKDA has published Landscape Redevelopment Of Neem Banani Park At Action Area Iib New Town Kolkata Landscape Redevelopment Of Neem Banani Park At Action Area Iib New Town Kolkata. Submission Date for this Tender is 05-02-2020. Landscape Tenders in Action Area -IIB New Town Kolkata West Bengal. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 03-Feb-2020 | Corrigendum | Date | 05-02-2020 |
| Name of Work: Landscape Redevelopment of Neem Banani Park at Action Area -IIB New Town, Kolkata. (Rate included GST & Cess) | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | CIVIL WORKS :- GROUND PREPARATION :- Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed. | BI01010001010000000000000515BI0100001113 | 6128 | Sqm |
| 2 | 2 | Earth work:- Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1,500 mm. | BI01010001010000000000000515BI0100001114 | 2168 | %Cum |
| 3 | 3 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work). With earth obtained from excavation of foundation | BI01010001010000000000000515BI0100001115 | 1076 | %Cum |
| 4 | 4 | Pre-Constructional Anti-termite measures :-Treatment to the back filling of R.C.C. foundation with chemical emulsion by admixing chloropyrofos emulsifiable concentrate (1% concentration) with water by weight at the rate of 7.5 ltr. per sq.m. of the vertical surface of the substructure of each side of the foundation. The work shall be carried out as per specification as described in para 6.3.1 of code IS- 6313 (part-II) 1981 (Mode of measurement will be per sq.m. of vertical area of foundation treated). | BI01010001010000000000000515BI0100001116 | 550.08 | Sqm |
| 5 | 5 | 25mm. thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturer's specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately).( Chequering not required over concrete or painted surface). | BI01010001010000000000000515BI0100001117 | 319.8 | Sqm |
| 6 | 6 | Extra rate for using water proofing and plasticising admixture @ 0.2% by weight of cement (or at manufacturer's specified rate) for concrete of various grades. | BI01010001010000000000000515BI0100001118 | 4 | Kg |
| 7 | 7 | Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer's specification [Cement to be supplied by the Department | BI01010001010000000000000515BI0100001119 | 319.8 | Sqm |
| 8 | 8 | BED PREPARATION AND FLOORING :-Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity. | BI01010001010000000000000515BI0100001120 | 325 | %Cum |
| 9 | 9 | Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. | BI01010001010000000000000515BI0100001121 | 11.81 | Sqm |
| 10 | 10 | Supplying, Providing & laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth.complete as per specification & direction of the Engineer-in-charge | BI01010001010000000000000515BI0100001122 | 3.96 | Cum |
| 11 | 11 | Concrete Works :- Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. | BI01010001010000000000000515BI0100001123 | 130.94 | Cum |
| 12 | 12 | Supplying ready mixed concrete of M 25 Grade with well graded stone chips of 20 mm nominal size containing designed quantity of cement per Cu.m of wet concrete produced in computerised batching plant under controlled condition using approved super plastisizer, designing concrete mix following I.S. 10262 and I.S. 456, transporting the mix with agitation in transit mixer to work site depositing the mix on a platform erected for the purpose at required levels of concreting and then placing the mix in its final location of form work compacting and curing the same complete as per specification & direction of the Engineer-in-charge including computerised batching plant transit mixer with all accessories vibrators etc. inclusive of all other incidental charges in this connection complete but excluding cost of hire charge of platform and its supporting staging which would be paid through separate item. [cement to be supplied by the Manufacturer/ supplier] | BI01010001010000000000000515BI0100001124 | 434.28 | Cum |
| 13 | 13 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge | BI01010001010000000000000515BI0100001125 | 2162.82 | Sqm |
| 14 | 14 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.\n(a) For works in foundation and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel.SAIL/TATA/RINL\n | BI01010001010000000000000515BI0100001126 | 39.09 | MT |
| 15 | 15 | M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004 haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 m. / 2nd floor level from the ground. For roof truss works, Span up to 12 Mtr | BI01010001010000000000000515BI0100001127 | 89.01 | MT |
| 16 | 16 | Brick work with 1st class bricks in cement mortar (1:6)In foundation and plinth | BI01010001010000000000000515BI0100001128 | 45.07 | Cum |
| 17 | 17 | Brick work with 1st class bricks in cement mortar (1:6) In superstructure, ground floor | BI01010001010000000000000515BI0100001129 | 55.22 | Cum |
| 18 | 18 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]15mm thick plaster in 1:4 mortar | BI01010001010000000000000515BI0100001130 | 770.15 | Sqm |
| 19 | 19 | Extra for each additional floor over the rate for ground floor items.(i) External plaster.(a) Upto 4th floor | BI01010001010000000000000515BI0100001131 | 653.83 | Sqm |
| 20 | 20 | (ii) Internal plaster. (a) Upto 4th floor | BI01010001010000000000000515BI0100001132 | 167.99 | Sqm |
| 21 | 21 | Supplying,fitting & fixing granite slab 15mm to 18mm thick in floor, lobby, stair, landing and treads etc. over 20mm (avg) thick base of cement morter (1:2) laid with white cement slurry @ 4.40Kg per Square meter before placing of granite and jointed with white cement slurry @ 2.0 Kg per square meter with necessary pigments and complete as per direction of Engineer-in-charge including cost of all materials, labours, curing and roughening of concrete surface complete. In ground floor (c) Area of each Granite slab above 1.00 Square meter | BI01010001010000000000000515BI0100001133 | 320.45 | Sqm |
| 22 | 22 | Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrre) (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with (B) Light Colour pigment.\n | BI01010001010000000000000515BI0100001134 | 8.18 | Sqm |
| 23 | 23 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.Walls With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.\n(a) Area of each tile upto 0.09 Sq.m\n(i) Coloured decorative\n | BI01010001010000000000000515BI0100001135 | 138.37 | Sqm |
| 24 | 24 | Rough dressed timber planks fitted and fixed with nut bolts excluding framework complete :\n(iii) 50mm thick planks (b) Sal Local\n | BI01010001010000000000000515BI0100001136 | 431.61 | Sqm |
| 25 | 25 | Wooden sash bar 50mm. X 35mm. Upto 1200 mm length with coach screw and flat iron clamps (40mm. X 6mm.) fitted and fixed complete in any position.(e) Local Sal. | BI01010001010000000000000515BI0100001137 | 247 | Each |
| 26 | 26 | Wood work in upper rails of railing, hand rail of staircase, balcony etc. includig necessary bend, moulding fitted and fixed complete (for purpose of payment section will be measured in the square) c) Sishu, Gamar, Champ, Badam, Bhola, Morga, Hallak | BI01010001010000000000000515BI0100001138 | 1.31 | Each |
| 27 | 27 | Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick | BI01010001010000000000000515BI0100001139 | 118.01 | Sqm |
| 28 | 28 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats | BI01010001010000000000000515BI0100001140 | 118.01 | %Sqm |
| 29 | 29 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.In Ground Floor:(a) One Coat | BI01010001010000000000000515BI0100001141 | 617.95 | %Sqm |
| 30 | 30 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.In Ground floor (Two Coat).a) Normal Acrylic Emulsion | BI01010001010000000000000515BI0100001142 | 617.95 | Sqm |
| 31 | 31 | a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. | BI01010001010000000000000515BI0100001143 | 5.33 | Qtl |
| 32 | 32 | Supplying & laying 3mm thick pre-fabricated plastomeric water proofing membrane conforming to EN 12311-1 & ASTMD 5147, manufactured with atactic poly propylene (APP) modified premium grade asphalt , specially reinforced with non-woven polyester core with polyester reinforcement @160 gms per sqm & both faces covered with thermo-fusible polyethylene film /MineraL on top face over a coat of primer @ 0.40 lit/sqm of manufacturer's specification on smooth,clean dry surface prepared wherever required.Lap joint shall be provided of 75 mm in longitudinal & 100 mm in transverse direction and fused using LPG/ Propane torch employing extra care ensuring full bondage, complete removal of entrapped air and sealing edges into grooves in appropriate manner as per direction of Engineer -in-charge all complete including materials,labour and applicable taxes. (Payment shall be made on the basis of finished surface area.).\nMembrane Property: Softening Point > 150 deg C, Cold Flexibility < -6 deg C, Tensile Strength, N/cm : 600 (longitudinal), 450 (transverse), Tearing Strength, N: 300 (longitudinal), 200 (transverse)on roof slab\n | BI01010001010000000000000515BI0100001144 | 73.65 | Sqm |
| 33 | 33 | Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in proportion (1 liquid: 4 cementitious material) or as per manufacturer's specification for water proofing layer in water tank etc. (No Departmental Cement is required) | BI01010001010000000000000515BI0100001146 | 49.06 | Sqm |
| 34 | 34 | Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge. 10-12 Micron thickness Annodizing film Natural white Two track window | BI01010001010000000000000515BI0100001147 | 4.5 | Sqm |
| 35 | 35 | Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall).(ii) 4 mm thick | BI01010001010000000000000515BI0100001148 | 4.5 | Sqm |
| 36 | 36 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak. | BI01010001010000000000000515BI0100001149 | 0.29 | Cum |
| 37 | 37 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | BI01010001010000000000000515BI0100001150 | 2150.84 | Sqm |
| 38 | 38 | Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | BI01010001010000000000000515BI0100001151 | 12.81 | Sqm |
| 39 | 39 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(b) On steel or other metal surface : With super gloss (hi-gloss.(ii) Two coats (white in shade) | BI01010001010000000000000515BI0100001152 | 2202.14 | Sqm |
| 40 | 40 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc including using of approved putty etc. on the surface, if necessary :(a) On timber or plastered surface :With super gloss (hi-gloss) -(iv) Two coats (with any shade except white) | BI01010001010000000000000515BI0100001153 | 12.81 | Sqm |
| 41 | 41 | Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor. (a) 35 mm thick shutters (single leaf) | BI01010001010000000000000515BI0100001154 | 12.81 | Sqm |
| 42 | 42 | Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws: ii) 65 x 45 x 2.5mm. | BI01010001010000000000000515BI0100001155 | 18 | Each |
| 43 | 43 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: a) With continuous plate base (Hexagonal/ Round rod) (i) 75 mm grip x 10 mm dia rod. | BI01010001010000000000000515BI0100001156 | 12 | Each |
| 44 | 44 | Supplying, Fitting & Fixing 30 mm thick both side prelaminated Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge.\n | BI01010001010000000000000515BI0100001157 | 1.58 | Sqm |
| 45 | 45 | Supply , fitting, fixing and installation of toilet cubicles (nylon) of width and depth as per specifications/ site drawings , cubicle height will be 2003 mm made of 12mm thk and door 18mm thk solid grade compact high pressure laminate as per IS : 2046 and En -438 manufactured under high specific pressure >5 Mpa and temperature >120 degrees Celsius with bunch of Kraft papers impregnated with thermosetting phenolic resin and decorative papers made of alpha cellulose fiber impregnated with thermosetting melamine resin which provide superior scratch, abrasion, heat , chemical impact , graffiti and moisture resistance along with anti bacterial properties. panels have a black core that when machined , provides distinct black edge including all necessary accessories made of steel like hinges , screws , door stopper , wall plug etc. and rubber padding as per drawing and as per the direction of engineer in charge . Toilet cubicles (W x D x H ) : 900mm x 1550mm x 2003mm ( height is including 50mm gap from bottom ) door width- 600 mm thickness - 18mm | BI01010001010000000000000515BI0100001158 | 6 | Cubical |
| 46 | 46 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.UPVC Pipes: 110 mm. Dia. | BI01010001010000000000000515BI0100001159 | 11.03 | Mtr |
| 47 | 47 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.UPVC Fittings: Bend 87.5 degree : 110 mm. Dia. | BI01010001010000000000000515BI0100001160 | 6 | Nos |
| 48 | 48 | Providing and fixing at or near ground level precast cement concrete in kerbs (size: 450 mm x 350 mm x width 150 mm at bottom with bevelled nosing at top) of cement concreat M20 Grade without reinforcement, fixing as per approved pattern and setting in position at site after preparing the bed grade and slopes by laying Cement concrete with jhama khoa (1:4:8) as per specification and direction of Engineer-in- Charge including filling of joints with 10 mm thick cement morter (3:1) and back filling the vertical piece properly with earth duly compacted and curing the morter joints for atleast 3 days including cost and carriage of all materials complete | BI01010001010000000000000515BI0100001161 | 1251.66 | Mtr |
| 49 | 49 | Designing of different customised curved & plain metal craft by laser cutting on different metal sheets of varying thickness for special architectural application as facade/wall panel/ceiling decoration as per design, drawing or as approved standard by the Engineer-in-charge including transportation. (Mode of measurement - linear /peripheral dimension of laser cut area) Mild Steel Plate, Aluminium & Stainless Steel. i) 2.0mm thick | BI01010001010000000000000515BI0100001162 | 31.5 | Mtr |
| 50 | 50 | Supplying & laying as per IRC-SP:063-2004 paver unit of any shade of approved quality as per relevant IS code, laid in pattern as directed in pavement, footpath, driveway (paver block only), etc including necessary underlay complete in all respect with all labour and material. Note: Sub-grade CBR should not be less than 5. 60 mm thick interlocking designer concrete paver block M- 35 grade for light-traffic zone,commercial & office complex,tourist resort as per IS: 15658-2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular /granular sub-base course including cost of sand for sand bed but excluding cost of base ,sub-base course & subgrade preparation.) (ii) Coloured Decorative | BI01010001010000000000000515BI0100001163 | 1346 | Sqm |
| 51 | 51 | Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including screening of aggregates and granular materials, premixing the material with water at OMC in Wet Mix Plant, carriage of mixed material by tipper to site, laying in uniform layers with Paver in Sub- base / Base course on well prepared surface and compacting with Vibratory Roller to achieve the desired density, including supply of all materials, machinery, fuel and lubricants, including incidental costs for lighting, guarding, barricading, making earthen bundh to protect the edges including cost of quality control complete as per Clause 406 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). | BI01010001010000000000000515BI0100001164 | 336.53 | Cum |
| 52 | 52 | By Mix in Place Method :Construction of granular sub-base by providing graded material, mixing by mix in place method with Rotavator at OMC, spreading in uniform layers with Motor grader on prepared surface in proper grade and camber, compacting with vibratory roller to achieve the desired density, including lighting, guarding, barricading, including cost of all materials, machinery, tools and plants including cost of quality control complete as per Clause 401 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). (iv) Grading – IV | BI01010001010000000000000515BI0100001165 | 336.53 | Cum |
| 53 | 53 | ELECTRICAL WORKS :- Distribution wiring in 1.1 KV single core stranded 'FR'PVC insulated & unsheathed copper wire (Brand\napproved by EIC) in 20mm size PVC rigid conduit 'FR'\n(Precision make) incl. necy. fittings as required 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC\n | BI01010001010000000000000515BI0100001166 | 50 | RM |
| 54 | 54 | Distribution wiring in 1.1 KV single core stranded 'FR'PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR'(Precision make) incl. necy. fittings as required.2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC | BI01010001010000000000000515BI0100001167 | 40 | RM |
| 55 | 55.01 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar\nincl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish.\n[only PVC Rigid Conduit on ceiling and remaining portion concealed] . (a) Average run 5 mtr\n | BI01010001010000000000000515BI0100001168 | 15 | Point |
| 56 | 55.02 | (b) Average run 8 mtr | BI01010001010000000000000515BI0100001169 | 2 | Point |
| 57 | 56.01 | Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. (a) 4 Module | BI01010001010000000000000515BI0100001170 | 2 | Set |
| 58 | 56.02 | (b) 6 Module | BI01010001010000000000000515BI0100001171 | 2 | Set |
| 59 | 56.03 | © 8Module | BI01010001010000000000000515BI0100001172 | 1 | Set |
| 60 | 57 | Supply & Fixing 240 V 6A Modular type switch (Brand approved by EIC) on existing GI Modular type switch board having top cover plate and making necessary connections as required. | BI01010001010000000000000515BI0100001173 | 6 | Each |
| 61 | 58 | Fixing only Modular type fan regulator on existing Modular GI switch board with top cover plate incl. making necy connections etc. | BI01010001010000000000000515BI0100001174 | 1 | Each |
| 62 | 59 | Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy.connections with PVC Cu wire and earth continuity wire etc. | BI01010001010000000000000515BI0100001175 | 2 | Each |
| 63 | 60 | Supplying and fixing of waterproof LED light fixture including Loading, Unloading, transportation etc all complete. (a) 36W - Philip make or equivalent make | BI01010001010000000000000515BI0100001176 | 2 | Nos |
| 64 | 61 | Supplying & Fixing bulk head light fitting (Havells make) with die cast aluminium housing & frosted glass on wall/ceiling incl. S&F 8watt CFL / 100 watts GLS lamp complete set | BI01010001010000000000000515BI0100001177 | 2 | Set |
| 65 | 62 | LED Strip light fixture with standard length of 5Mtrs including driver & all necessory accessoring for fixing | BI01010001010000000000000515BI0100001178 | 300 | Mtr |
| 66 | 63 | EARTHING INSTALLATIONS :-Excavation of soil for installation of Earth Electrode and filling\n& ramming. (a) For Soft Soil\n | BI01010001010000000000000515BI0100001179 | 3 | Cum |
| 67 | 64 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts.Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts.long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm diax 80 mm long GI bolts, double nuts, double washers incl. S &F 15 mm dia GI pipe protection (1 Mts. long) to be filled withbitumen partly under the ground level and partly above groundlevel driven to an long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S &F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the groundlevel as below. (a) By TATA-Medium GI pipe | BI01010001010000000000000515BI0100001180 | 4 | Nos |
| 68 | 65 | Supply of Ceiling Fan of 3 blades 1200 mm high quality including transportation and GSt as applicable. | BI01010001010000000000000515BI0100001181 | 1 | Each |
| 69 | 66 | Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl.painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. | BI01010001010000000000000515BI0100001182 | 1 | Each |
| 70 | 67 | Supplying of Exaust fan of 38 Cm (15" ) diametre high quality including transportation and GSt as applicable | BI01010001010000000000000515BI0100001183 | 7 | Each |
| 71 | 68 | Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: 38 cm (15") | BI01010001010000000000000515BI0100001184 | 7 | Each |
| 72 | 69 | Supply of CABLE (XLPE 1.1 KV ) 4 C x 25 sq mm | BI01010001010000000000000515BI0100001185 | 0.015 | KM |
| 73 | 70 | Supply of CABLE (XLPE 1.1 KV) 4 X 6 sq mm | BI01010001010000000000000515BI0100001186 | 2.53 | KM |
| 74 | 71 | Supply of CABLE (XLPE 1.1 KV) 4 X 4 sq mm | BI01010001010000000000000515BI0100001187 | 2 | KM |
| 75 | 72 | Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip)Wire, making holes etc. as necy. mending good damages and painting. | BI01010001010000000000000515BI0100001188 | 45 | RM |
| 76 | 73 | Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed | BI01010001010000000000000515BI0100001189 | 4500 | RM |
| 77 | 74 | Providing, supplying, installation of 10 kVA Genset with accoustic enclouser as per the design and direction of the engineer. The rate should be including tax and transportation charges including loading and unloading. | BI01010001010000000000000515BI0100001190 | 1 | Set |
| 78 | 75 | Providing supplying and fixing of 20W T5 LED BATTEN LIGHT FIXTURE all complete including tax and transport including all tools and tackles | BI01010001010000000000000515BI0100001191 | 5 | Nos |
| 79 | 76 | Providing supplying and fixing of 9W 1'X1' LED SURFACE/RECESS MOUNTED LUMINAIRE all complete including tax and transport including all tools and tackles. | BI01010001010000000000000515BI0100001192 | 10 | Nos |
| 80 | 77 | Design, fabrication, assembling, wiring, supply, testing at works, packaging, forwarding to site, installation, testing & commissioning of distribution panels, fabricated out of 14 gauge CRCA sheet steel in cubicle formation, compartmentalized, Form 3B construction, free standing floor mounted, dust and vermin proof with reinforcement of suitable size angle iron, channel, `T’ sections and / or flats wherever necessary. 3 mm thick cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated with all anticorrosive process before powder coating as per specifications and final approved shade. 2 Nos. earthing terminals shall be provided for all distrtibution panels. Panels shall be suitable for 415V, 3 phase, 4 wire, 50 HZ supply system. Lifting hooks shall also be provided in case of large panels. Approval shall be taken for each panel in the form of shop drawings before fabrication. Galvanised hardwares with zinc passivation shall be used in fabrication of panels. MP based release to be provided for above 250A breakers. (Main LT Panel)Incomer: 2 No. 63A 10KA 4P MCB. Metering for Incomer: 2Nos. of Load Manger (KWH+KW+A+V+F with RS - 485 port) , 2 sets - 63/5A ,10VA, CL 1.0, CT's for metering , 1 set - RYB LED type indicating lamps , 1 set - Control MCB with Neutral link Bus bar: 1 set - 63A, 4Wire, 10KA, 415V, TPN Aluminium busbars, interconnections with colour coded heat shrinkable sleeves and SMC Busbar supports. Outgoings: 3 Nos. 40A TPN 10KA MCB ,1No of Transient Voltage Surge Supressor (TVSS) All panels shall be of Top / Bottom cable entry. Panels shall be extandable type on either ends | BI01010001010000000000000515BI0100001193 | 1 | Nos |
| 81 | 78 | EXTERNAL LIGHTING DB: Incomer: 1 No. 40A 10KA 4P RCBO. Metering for Incomer: 1Nos. of kWH Meter, 1 set - RYB LED type indicating lamps , 1 set - Control MCB with Neutral link Bus bar: 1 set - 40A, 4Wire, 10KA, 415V, TPN Aluminium busbars, interconnections with colour coded heat shrinkable sleeves and SMC Busbar supports. Outgoings: 8 Nos. of 16A TPN 10KA MCB ,8Nos of 24Hr Astronomical Timer with contactor, Auto/Manual selector switch etc. All panels shall be of Top / Bottom cable entry. Panels shall be extandable type on either ends. | BI01010001010000000000000515BI0100001194 | 2 | Nos |
| 82 | 79 | Plumbing and Sanitary Works :- Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer 500 litre capacity. | BI01010001010000000000000515BI0100001195 | 1 | Each |
| 83 | 80 | Labour for hoisting plastic water storage tank. (i) Upto 1500 litre capacity.(a) Upto 1st story from G.L. | BI01010001010000000000000515BI0100001196 | 1 | Each |
| 84 | 81 | Labour for hoisting plastic water storage tank. (i) Upto 1500 litre capacity. (b) Extra for each additional story | BI01010001010000000000000515BI0100001197 | 1 | Each |
| 85 | 82 | Labour for punching hole in plastic water storage tank upto 50 mm dia. | BI01010001010000000000000515BI0100001198 | 5 | Each |
| 86 | 83 | Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.(ii) 550 mm X 400 mm size | BI01010001010000000000000515BI0100001199 | 6 | Each |
| 87 | 84 | Supplying, fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.(iii) 900mm Long | BI01010001010000000000000515BI0100001200 | 6 | Each |
| 88 | 85 | Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.(b) With 'S' trap | BI01010001010000000000000515BI0100001201 | 6 | Each |
| 89 | 86 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc | BI01010001010000000000000515BI0100001202 | 6 | Each |
| 90 | 87 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete E.W.C. Bestolite (solid type white) | BI01010001010000000000000515BI0100001203 | 6 | Each |
| 91 | 88 | Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete ii) C. P. Flush Pipe | BI01010001010000000000000515BI0100001204 | 6 | Each |
| 92 | 89 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.635mm x 395mm x 420mm | BI01010001010000000000000515BI0100001205 | 3 | Each |
| 93 | 90 | Supplying, fitting and fixing urinal flush pipe fittings of approved brand.(b) C.P. urinal flush pipe fittings range of three | BI01010001010000000000000515BI0100001206 | 3 | Each |
| 94 | 91 | Supplying, fitting and fixing dome shaped C.P. waste grating for urinals.i) 32 mm | BI01010001010000000000000515BI0100001207 | 3 | Each |
| 95 | 92 | Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.(i) 600 mm long | BI01010001010000000000000515BI0100001208 | 3 | Each |
| 96 | 93 | Renewing 15 mm C.P. over brass spreader | BI01010001010000000000000515BI0100001209 | 3 | Each |
| 97 | 94 | Supplying, fitting and fixing porcelain partition wall of approved make of size 618 mm X 310 mm complete in all respect. | BI01010001010000000000000515BI0100001210 | 2 | Each |
| 98 | 95 | Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges.i) 450 mm X 300 mm | BI01010001010000000000000515BI0100001211 | 6 | Each |
| 99 | 96 | Supplying, fitting and fixing liquid soap container a) Cromium plated | BI01010001010000000000000515BI0100001212 | 4 | Each |
| 100 | 97 | Supplying, fitting and fixing towel rail with two brackets a) C.P. over brass (i) 25 mm dia. and 450 mm long | BI01010001010000000000000515BI0100001213 | 4 | Each |
| 101 | 98 | Supplying, fitting and fixing shower of approved brand and make.Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar | BI01010001010000000000000515BI0100001214 | 6 | Each |
| 102 | 99 | Supplying, fitting and fixing bib cock or stop cock (d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand). | BI01010001010000000000000515BI0100001215 | 22 | Each |
| 103 | 100 | Supplying, fitting and fixing porcelain toilet paper holder of approved make with wooden spindle as necessary.i) Roll type size 250 mm X 125 mm | BI01010001010000000000000515BI0100001216 | 6 | Each |
| 104 | 101 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (v) Double Socketed 1.2 Meter Length - (b) 110 mm | BI01010001010000000000000515BI0100001217 | 35 | Mtr |
| 105 | 102 | (B) Fittings - (i) Coupler (b) 110 mm | BI01010001010000000000000515BI0100001218 | 38 | Mtr |
| 106 | 103 | v) Plain Y- (b) 110 mm | BI01010001010000000000000515BI0100001219 | 7 | Each |
| 107 | 104 | ix) Bend 45deg - (b) 110 mm | BI01010001010000000000000515BI0100001220 | 7 | Each |
| 108 | 105 | xv) Vent cowl - (b) 110mm | BI01010001010000000000000515BI0100001221 | 2 | Each |
| 109 | 106 | (v) Double Socketed 1.2 Meter Length - (a) 75 mm | BI01010001010000000000000515BI0100001222 | 60 | Mtr |
| 110 | 107 | B) Fittings - (i) Coupler (a) 75 mm | BI01010001010000000000000515BI0100001223 | 50 | Each |
| 111 | 108 | v) Plain Y- (a) 75 mm | BI01010001010000000000000515BI0100001224 | 9 | Each |
| 112 | 109 | ix) Bend 45deg - (a) 75 mm | BI01010001010000000000000515BI0100001225 | 9 | Each |
| 113 | 110 | xv) Vent cowl - (a) 75mm | BI01010001010000000000000515BI0100001226 | 2 | Each |
| 114 | 111 | v) Double Socketed 3.0 Meter Length a) 160 mm | BI01010001010000000000000515BI0100001227 | 20 | Mtr |
| 115 | 112 | B) Fittings - (i) Coupler (a) 160 mm | BI01010001010000000000000515BI0100001228 | 7 | Each |
| 116 | 113 | 110mm x 110mm 'P' Trap | BI01010001010000000000000515BI0100001229 | 1 | Each |
| 117 | 114 | Plain Floor Trap with Top tile & Strainer 75 mm | BI01010001010000000000000515BI0100001230 | 8 | Each |
| 118 | 115 | Multi Floor Trap with Top tile & Strainer 75mm | BI01010001010000000000000515BI0100001231 | 2 | Each |
| 119 | 116.01 | Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer in charge. (Payment will be made on centre line measurement of the total pipeline including specials (A) Above Ground. (i) 75mm dia | BI01010001010000000000000515BI0100001232 | 35 | Mtr |
| 120 | 116.02 | ii) 110mm dia | BI01010001010000000000000515BI0100001233 | 60 | Mtr |
| 121 | 116.03 | B) Under Ground (i) 75mm dia | BI01010001010000000000000515BI0100001234 | 20 | Mtr |
| 122 | 116.04 | (ii) 110mm dia | BI01010001010000000000000515BI0100001235 | 10 | Mtr |
| 123 | 116.05 | (iii) 160mm dia | BI01010001010000000000000515BI0100001236 | 20 | Mtr |
| 124 | 117 | Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials (i) With Pakur Variety. (SAIL / TATA / RINL) | BI01010001010000000000000515BI0100001237 | 4 | Each |
| 125 | 118 | Supplying, fitting and fixing yard gully with approved H.C.I. grating complete.(i) 225 mm X 150 mm with 230 mm gratings | BI01010001010000000000000515BI0100001238 | 2 | Each |
| 126 | 119 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work- PVC Pipes \n50 mm\n | BI01010001010000000000000515BI0100001239 | 10 | Mtr |
| 127 | 120 | Supplying, fitting and fixing PVC pipes for Underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). With all necessary accessories, specials viz. socket, bend, tee, union, cross, elbow, nipple, longscrew, reducing socket, reducing tee, short piece etc.fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.)\n50mm dia\n | BI01010001010000000000000515BI0100001240 | 10 | Mtr |
| 128 | 121 | Supplying, fitting and fixing (J) Threaded End Cap (i) 50 mm | BI01010001010000000000000515BI0100001241 | 1 | Each |
| 129 | 122.01 | Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. (a) For Exposed Work (i) CPVC Pipes Class-1, SDR-11 (i) 40 mm | BI01010001010000000000000515BI0100001242 | 10 | Mtr |
| 130 | 122.02 | (ii)32 mm | BI01010001010000000000000515BI0100001243 | 10 | Mtr |
| 131 | 123.01 | (b) For Concealed Work (i) CPVC Pipes Class-1, SDR-11 (i) 25 mm | BI01010001010000000000000515BI0100001244 | 15 | Mtr |
| 132 | 123.02 | (ii) 20 mm | BI01010001010000000000000515BI0100001245 | 25 | Mtr |
| 133 | 124 | Q) Ball Valve -32 mm dia | BI01010001010000000000000515BI0100001246 | 1 | Each |
| 134 | 125 | Q) Ball Valve -40 mm dia | BI01010001010000000000000515BI0100001247 | 1 | Each |
| 135 | 126 | (Q) Ball Valve -25 mm dia | BI01010001010000000000000515BI0100001248 | 2 | Each |
| 136 | 127 | Sluice valve chamber with C.I. heavy cover with locking arrangement, (weight not less than 25 kg) (size of chamber 450 mm X 600 mm inside upto 900 mm depth) 250 mm thick cement brick walls (6:1), 150 mm thick cement concrete (6:3:1) bed with stone chips, 20 mm thick cement plaster (6:1) for inside wall and 15 mm thick cement plaster (4:1) for outer walls including rounding corners. | BI01010001010000000000000515BI0100001249 | 1 | Each Set |
| 137 | 128 | TREES AND SHURBS WORKS :-Supplying and stacking of good earth (adequate for horticulture work) at site including royalty (earth measured in stack will be reduced by 20% for payment) | BI01010001010000000000000515BI0100001250 | 901.935 | Cum |
| 138 | 129 | Supplying and stacking sludge (adequate for Horticulture work) at site in dry cake form from approved disposal work site including royalty, all lead and lift etc. (Sludge measured in stack will be reduced by 8%). | BI01010001010000000000000515BI0100001251 | 122.991 | Cum |
| 139 | 130 | Preparation of beds for hedging and shrubbery by\nexcavating 60cm deep and trenching the excavated base to a further depth of 30cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 ( 8 parts of stacked volume of earth after reduction by 20%, one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary watering and finally fine dressing, levelling etc., including stacking and disposal of materials declared unserviceable and surplus earth by spreading and levelling as directed, within a lead of 50m lift upto 1.5m complete. This includes supply of labour, tools & plants including materials. Planting hedge plants in two rows at 30cm apart. HIGH SHRUB - 1.2M -1.5 M High | BI01010001010000000000000515BI0100001252 | 1192.04 | %sum |
| 140 | 131 | Medium Shrubs- 0.6- 0.9 M High | BI01010001010000000000000515BI0100001253 | 1289.23 | %sum |
| 141 | 132 | LOW SHRUB WITH GROUND COVERS -0.30 -0.45 M High | BI01010001010000000000000515BI0100001254 | 935.15 | %sum |
| 142 | 133 | Providing & laying Bermuda Grass grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same maintenance for 30 days or more till the grass establish properly,as per direction of officer in charge. | BI01010001010000000000000515BI0100001255 | 1513.57 | Sqm |
| 143 | 134 | Supplying and Planting of different plant / trees ( Supplying well grown plants bushy and healthy, minimum height as specified i.e. exposed height including all leads & lift, carriage, handling, manuring, applying presticide and fertilizer etc. SHURBS :- BOUGAINVILLEA GLABRA FORMOSA:Providing and stacking of Bougainvillea (Variety Butiana, Lady Mary Baring, Mahara,Mohan,Scarlet Queen, Variegated, Glabra Formosa, Peruviana Odissi, Paratha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.\n | BI01010001010000000000000515BI0100001256 | 26 | Nos |
| 144 | 135 | BOUGAINVILLEA PERUVIANA SUBHRA ::Providing and stacking of Bougainvillea (Variety Butiana, Lady Mary Baring, Mahara,Mohan,Scarlet Queen, Variegated, Glabra Formosa, Peruviana Odissi, Paratha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.\n\n\n | BI01010001010000000000000515BI0100001257 | 35 | Nos |
| 145 | 136 | FICUS PANDA:Providing and stacking of Ficus panda of height 60-90 cm, with 8-10 branches, and healthy foliage, bushy in big size HDPE bag as per direction of the officer-in-charge.\n\n | BI01010001010000000000000515BI0100001258 | 62 | Nos |
| 146 | 137 | FICUS STARLITE:Providing and Displaying Ficus Starlight with fresh, healthy and attractive foliage 45 to 60 cm spread 75 to 90 cm ht., specimen bushy ,in 35 cm Cement Pot as per direction of the officer-in-charge.\n | BI01010001010000000000000515BI0100001259 | 70 | Nos |
| 147 | 138 | FICUS LYRATA :Providing and stacking of Ficus Iyrata of height 45-60 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge. | BI01010001010000000000000515BI0100001260 | 36 | Nos |
| 148 | 139 | HAMELIA PATENS :Providing and stacking of Hamelia patens of height 60-75 cm. with 6-8 branches in poly bags of size 25 cm as per direction of the officer-in-charge. | BI01010001010000000000000515BI0100001261 | 67 | Nos |
| 149 | 140 | FLORAL AND AROMA PLANTS :- NERIUM OLEANDER DWARF: Providing and stacking of Nerium oleander (kaner) dwarf of height 30-40\ncm. in earthen pot of size 20 cm as per direction of the\nofficer-in-charge | BI01010001010000000000000515BI0100001262 | 5 | Nos |
| 150 | 141 | POINSETTIA RED :Providing and stacking of Euphorbia pulcherrima (dark red) well branched (poinsettia Red Hegg) of height 60-75 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge.\n | BI01010001010000000000000515BI0100001263 | 23 | Nos |
| 151 | 142 | GROUND COVERS. ASPARAGUS MEYERI :Providing and stacking of Asparagus marrie, well developed 15 to 20 leaves, full of branches and foliage in 25 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.\n | BI01010001010000000000000515BI0100001264 | 216 | Nos |
| 152 | 143 | PLANTING TREES .Brassia Actinophylla : Providing and displaying of Brassia Variegated having ht. 30 cm, well developed with fresh and healthy foliage in 20 cm size of Earthen pot/ Plastic pot & as per direction of the officer-in-charge. | BI01010001010000000000000515BI0100001265 | 4 | Nos |
| 153 | 144 | Plumeria Alba :Providing and stacking of Plumeria alba of height 120-135 cm. with 2-3 branches in bags of size 30 cm as per direction of the officer-in-charge. | BI01010001010000000000000515BI0100001266 | 4 | Nos |
| 154 | 145 | Mimusops elengii :Providing and stacking of Mimusops elengi (Maulsri) of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. | BI01010001010000000000000515BI0100001267 | 4 | Nos |
| 155 | 146 | Mangnolia Grandiflora :Providing and stacking of Magnolia grandiflora of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. | BI01010001010000000000000515BI0100001268 | 4 | Nos |
| 156 | 147 | Ficus Noda Folio :Providing and stacking of Ficus nuda of height 150-165 cm., bushy with healthy branches and lush green foliage in big size HDPE bags as per direction of the officer-in-charge. | BI01010001010000000000000515BI0100001269 | 4 | Nos |
| 157 | 148 | Jacaranda Mimosifolia:Providing and stacking of Jacaranda mimosifolia of height 150-165 cm. In big poly bags of size 25 cm as per direction of the officer-in-charge. | BI01010001010000000000000515BI0100001270 | 4 | Nos |
| 158 | 149 | Tabebuia rosea:Providing and stacking of Tabebuia sp. Of eight 150-165 cm. in big polybags of size 25 cm as per direction of the officer-in-charge. | BI01010001010000000000000515BI0100001271 | 4 | Nos |
| 159 | 150 | Tabebuia Avellanedae :Providing and stacking of Tabebuia sp. Of eight 150-165 cm. in big polybags of size 25 cm as per direction of the officer-in-charge. | BI01010001010000000000000515BI0100001272 | 4 | Nos |
| 160 | 151 | NON SCHEDULE ITEMS (CIVIL AND MISC ) :- Supplying, Providing, fixing of 2 X 80 L capacity Trash Bin made out of SS 304 grade material with proper support and firmly fixed to ground with suitable arrangement as directed by engineer-in-charge, including transportation, Loading unloading etc all complete. | BI01010001010000000000000515BI0100001273 | 8 | Set |
| 161 | 152 | Supplying, Providing, fixing of T3300 Hi-Lo, Barrier –Free Steel Pedestal Drinking Fountain uses a patented stainless steel pushbutton valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. Model T3300 Hi-Lo, Barrier –Free Steel Pedestal Drinking Fountain shall include dual 18 gauge Type 304 Stainless Steel satin finish basins with integral swirl design, 14 gauge Type 304 Stainless Steel, 100% lead-free waterways, pushbutton operated stainless steel valves with front-accessible cartridge and flow adjustment, polished chrome-plated brass vandal-resistant bubbler heads with integral laminar anti-squirt flow, chrome-plated brass vandal-resistant waste strainers, vandal-resistant bottom plates, stainless steel satin finish back panel, high and low fountain mounting levels, and 1-1/4" O.D. (3.2 cm) waste pipes. (P-trap and stop require rear access).Additional specification as directed by engineer-in-charge, including transportation, Loading unloading etc all complete. | BI01010001010000000000000515BI0100001274 | 2 | Each |
| 162 | 153 | Supplying, Providing, fixing & commisioning of Outdoor 2MP IP IR BULLETT CAMERA 1/3" Progressive CMOS, ICR, 0lux with IR, 1920x1080:25fps(P)/30fps(N), 2.8~12mm VF lens, IP66, H.264/MJPEG, dual-stream, IP66, DC12V & PoE, DWDR, 3D DNR, BLC, IR: up to 30m, On-board card slot (up to 64GB), Audio I/O, Alarm I/O, 8 Port Independent POE Switch, 8 CH NVR 200Mbps Bit Rate Input Max(up to 16-ch IP video), 4 SATA Interfaces, 16 independent PoE network interfaces, 80Mbps Bit Rate Input Max(up to 16-ch IP video), Connectable to the third-party network cameras, alarm I/O: 16/4, 1.5U case,19" HDMI/VGA output at up to 1920×1080P resolution. Support Channel-zero encoding. Support S.M.A.R.T. and bad sector detection. HDD quota management; different capacity can be assigned to different channel. ONVIF, UL LISTED. CERTIFICATE CE & FCC., 4 TB SURVILLANCE HDD, wiring for CCTV system using CAT 6 cable in existing pvc conduit with all necessary accessories of wires, 1" - 2 mm thick Medium MS Conduits in wall, columns, false ceiling etc., including associated civil works as directed by engineer-in-charge, including transportation, Loading unloading etc all complete. | BI01010001010000000000000515BI0100001275 | 1 | Set |
| 163 | 154 | Supplying, Providing, fixing of FRP SITTING BENCH without Back support ( 3 seater) as per the design of size 34" (L) x 20" (W) x 17" (H) With both side support having a stone finish look. The support size 20"mm x 12"mm x5"mm at both ends fixed firmly with the ground as per the detailed drawings with grouting materials as required and as directed by engineer-in-charge. The thickness of FRP in the sitting portion shall be minimum 5 mm thick to provide a adequate support. It shall be painted with Ducco Nc base paint to give it a even stony finish. The bench shall be best to use for outdoor purpose and shall be Weather proof, Heat resistant up to 50 Degree C. The above rate should be including GST, transportation, Loading unloading etc all complete. | BI01010001010000000000000515BI0100001276 | 45 | Set |
| 164 | 155 | Supplying, Providing, fixing of FRP SITTING BENCH without Back support ( 3 seater) as per the design of size 68" (L) x 20" (W) x 17" (H) With both side support having a stone finish look. The support size 20"mm x 12"mm x5"mm at both ends fixed firmly with the ground as per the detailed drawings with grouting materials as required and as directed by engineer-in-charge. The thickness of FRP in the sitting portion shall be minimum 5 mm thick to provide a adequate support. It shall be painted with Ducco Nc base paint to give it a even stony finish. The bench shall be best to use for outdoor purpose and shall be Weather proof, Heat resistant up to 50 Degree C. The above rate should be including GST, transportation, Loading unloading etc all complete | BI01010001010000000000000515BI0100001277 | 35 | Set |
| 165 | 156 | Supplying, Providing & laying of various color aggregates of various sizes ranging from 10mm to 20mm as per the requirement and as per the detailed drawings and as directed by engineer-in-charge, including GST, transportation, Loading unloading etc all complete. | BI01010001010000000000000515BI0100001278 | 32.36 | Cum |
| 166 | 157 | Supplying, Providing & laying of River washed pebbles of various sizes ranging from 50mm to 70mm as per the requirement and as per the detailed drawings and as directed by engineer-in-charge, including GST, transportation, Loading unloading etc all complete.\nWhite color | BI01010001010000000000000515BI0100001279 | 9.38 | Cum |
| 167 | 158 | Supplying, Providing & laying of River washed pebbles of various sizes ranging from 50mm to 70mm as per the requirement and as per the detailed drawings and as directed by engineer-in-charge, including GST, transportation, Loading unloading etc all complete.\nBrown color | BI01010001010000000000000515BI0100001280 | 28.15 | Cum |
| 168 | 159 | Supplying, Providing & laying of Natural rocks of various sizes ranging from 400 mm to 600mm as per the requirement and as per the detailed drawings and as directed by engineer-in-charge, including GST, transportation, Loading unloading etc all complete. | BI01010001010000000000000515BI0100001281 | 32.36 | Cum |
| 169 | 160 | Supplying, Providing & laying of 80mm thick FLAG STONE for exterior Flooring made out of concrete grade M40 on 50mm sand bed of random rectangular shapes (600x600 / 600x750 / 600x900) and color with 75 mm thick gaps inberteen slabs which to be filled with good earth for grass inlay as per the requirement and detailed drawings and as directed by engineer-in-charge, including GST, transportation, Loading unloading etc all complete. (cost of sand bedding and good earth to be paid seperately). | BI01010001010000000000000515BI0100001282 | 110.42 | Sqm |
| 170 | 161 | Supplying, Providing & Placing of Custom made bench without back Rest of size 500mm Width and 450mm Depth in a semi circular Shape made out of fiber glass reinforced polymer (FRP) in the Combination of GP resin, banani matt 2300 gsm (6 mm thickness ) with additional FRP reinforcemant,Finished and painted in duco NC base paint with two coat of PU matt clear color. Finish: -sadharahalli gray stone finish as per the detailed drawings and as directed by engineer-in-charge, including GST, transportation, Loading unloading etc all complete. | BI01010001010000000000000515BI0100001283 | 101.85 | Rmt |
| 171 | 162 | Supplying, providing & Installation of SUNBURST type aerator of capacity 0.5 HP with diametre of sparay not less than 3 m including necessary piping, nozzels, meter, panels as required for operation along with 3 set of waterproof LED lighting of 36 W as per manufacturers specification and as directed by the engineer in charge including transportation, loading unloading,including other taxes etc complete including GST as applicable all complete. | BI01010001010000000000000515BI0100001284 | 6 | Set |
| 172 | 163 | Supplying, providing & Installation of giant fountain of capacity 10 HP and frequency of 50Hz with spraying height of not less than 5M including necessary piping, nozzels, meter, panels as required for operation along with 3 set of waterproof LED lighting of 36 W as per manufacturers specification and as directed by the engineer in charge including transportation, loading unloading,including other taxes etc complete including GST as applicable all complete. | BI01010001010000000000000515BI0100001285 | 1 | Set |
| 173 | 164 | FLOATING LIGHTS :Supplying, providing & Installation LED high output frosted ball in IP67 with RGB LED. Housing in frosted polyethylene, 500mm dia. Suitable for gardens and floating over water. 2W LED Induction rechargeable module, Control through remote. Chargeable battery. Input 240Vac. Not suitable for submeging in the water . as per manufacturers specification and as directed by the engineer in charge including transportation, loading unloading,including other taxes etc complete including GST as applicable all complete including 5 years of maintenance. | BI01010001010000000000000515BI0100001286 | 11 | Nos |
| 174 | 165 | GRANITO BOLLARD 60cm HIGHT :Supplying, providing & Installation Floor surface mounted bollard fixture with emission thru specially desired slits provided on all four side to creat interersting pattern on the floor. Light is emitted through the non-uniform slits. Slits are made by system programmed lazer / plasma cutting. Dimension : L 300 x W 300 x H 600 mm.Housing with base plate : Aluminium 3 mm thick. Structural frame : 'L' Angle all around in aluminium . Light module : 36W, 3000 / 4000 / 6500 K, IP66, Ik08, CRI 70. LED Driver : IP67 rated integral. Hardware in 304 grade stainless steel, Pretreatment : Anti corrosion process is done prior to final finish, Product Finish : Powder coated in Wood finish by skilled team to look like part of landscape, Special Protection: Jelly connectors at input & output supply, Surge protection : Additional 10 KV SPD is provided in service window in series connection. Male-Female, IP67 connector for ease of maintenance.as per manufacturers specification and as directed by the engineer in charge including transportation, loading unloading,including other taxes etc complete including GST as applicable all complete. | BI01010001010000000000000515BI0100001287 | 35 | Nos |
| 175 | 166 | POST TOP FIXTURE :Supplying, providing & InstallationPole mounted modern looking architectural luminaire with direct light emission high efficiency luminaire. IP66 and IK10 rated luminaire with housing in Injection die-cast aluminium body,Twomaterial polycarbonate opal and clear bowl, with Led backlight as an option: white or other colours on request.56W LED in 3000K with FInished in polyester powder coated. Very precise through ORALENS. Entry sleeve with membrane seal, extruded silicon rubber gasket for IP protection. Breathing system with activated carbon filter. Integral river. Pole driver fcility available for djusting the intensity and site level for individual luminaire with our dimming system. as per manufacturers specification and as directed by the engineer in charge including transportation, loading unloading,including other taxes etc complete including GST as applicable all complete including 5 years of maintenance. | BI01010001010000000000000515BI0100001288 | 25 | Nos |
| 176 | 167 | POST of HEIGHT 4M to 5M:Supplying, providing & Installation5Mtr height straight and tappered pole in GI with hot dipped galvanization and then finished in spray paint. Base dia at 114mm and the pole top dia is 76mm. as per manufacturers specification and as directed by the engineer in charge including transportation, loading unloading,including other taxes etc complete including GST as applicable all complete including 5 years of maintenance. | BI01010001010000000000000515BI0100001289 | 25 | Nos |
| 177 | 168 | RECESSED LIGHTS :Supplying, providing & Installation Flexible IP67 LED strip with 3050 SMD LED buit into aluminum channel with diffuser, mounting through brackets screwing on to the surface. LED strip sealed in silicon seath for IP protection. 7W/Mtr in 3000K with diffused distribution, Remote driver.. as per manufacturers specification including 60W IP67 Driver as required and as directed by the engineer in charge including transportation, loading unloading,including other taxes etc complete including GST as applicable all complete. as per manufacturers specification and as directed by the engineer in charge including transportation, loading unloading,including other taxes etc complete including GST as applicable all complete including 5 years of maintenance. | BI01010001010000000000000515BI0100001290 | 105 | Rmt |
| 178 | 169 | TREE UPPER LIGHT:Supplying, providing & Installation P65 spike or surface mounted mini ascent flood light for tree uplight or façade lighting with precise optics. Housing in pressure diecast aluminium finished in polyester powder coating and a anti corrosive treatment is made before final finished. 12W LED in 3000K with optional optics. All hardware is in 304 grade stainless steel. Spike in polyurethere or in metal. Builtin driver Including 60W IP67 Driver as per manufacturers specification and as directed by the engineer in charge including transportation, loading unloading,including other taxes etc complete including GST as applicable all complete including 5 years of maintenance. | BI01010001010000000000000515BI0100001291 | 25 | Nos |
| 179 | 170 | SHRUB LIGHTER : Supplying, providing & Installation of IP65 spike or surface mounted mini ascent flood light for tree uplight or façade lighting with precise optics. Housing in pressure diecast aluminium finished in polyester powder coating and a anti corrosive treatment is made before final finished. 12W LED in 3000K with optional optics. All hardware is in 304 grade stainless steel. Spike in polyurethere or in metal. Builtin driver as per manufacturers specification including 60W IP67 Driver and as directed by the engineer in charge including transportation, loading unloading,including other taxes etc complete including GST as applicable all complete including 5 years of maintenance. | BI01010001010000000000000515BI0100001292 | 17 | Nos |
| 180 | 171 | WEED LIGHT FOR WATER FRONT : Supplying, providing & Installation of Floor light fixture with diffuse emission, with monochromatic LED light sources. IP67. Light is diffused through 7 PMMA rods with different heights to give the impression of a reed bed and which can be screwed to the base by means of AISI 316 stainless steel bushes. Part of the light is also diffused on the floor around the base. The base has an irregular shape, which has been designed to allow a mosaic connection with other light fixtures so as to create an elaborate composition as needed. Technical features in compliance with EN60598-1. IK10 rated, Consists of a base made up of a transparent polycarbonate casing installed between 2 AISI316 stainless steel plates fixed by means of AISI316 stainless steel screws. Water sealing is assured by a silicone gasket. The light fixture can be fastened to the floor by means of the holes in the lower plate. Technopolymer aesthetic cover. Complete with integrated ballast and supplied with a 1.5 m-long H05RN-F 2x1 cable provided with IP67 connector for the electrical connection to the mains suitable for 5- 13.5mm diameter cables. Total height is 1499mm and width is 224mm. as per manufacturers specification and as directed by the engineer in charge including transportation, loading unloading,including other taxes etc complete including GST as applicable all complete including 5 years of maintenance. | BI01010001010000000000000515BI0100001293 | 117 | Nos |
| 181 | 172 | Container Cafe: Supplying, providing & Installation of container café as per the detailed specifications. | BI01010001010000000000000515BI0100001294 | 2 | Nos |
| 182 | 173 | Providing and fixing Outdoor Gym equipment : LEG CURL & EXTENSION MACHINE: Supply, Fixing and Installation of a Leg Curl & Extension Machine: Size - 91 X 40 X 133 CM, that contains a leg extension/curl dual action section that is affixed to the main monolithic curved arc tube central pillar without any convex sides of 89mm OD and min wall thickness of 3 mm & has a 8mm thick, 40cm gusset support using a ONE A.R.M MODULE (Angular resistance, bearing less module) that works as dual action [push and pull / extension & contraction]. The ARM must be bearing less, shock less, drop less and provide 0-30 kg resistance. The seats are fixed to the main curved central pillar and do not move up and down - [Are immovable] to ensure it is safe & stable, zero drops and support disable people to use the product without risk of falling or slipping off. All fasteners to be of 304 stainless, Torx Anti Vandal Fasteners, All nuts enclosed in Polyamide Anti Vandal Caps. The seat must consist of PU Polysafe cushion seats. Finishing to be Metalized / Plasma zinc injection + Dupont/Alexta outdoor use color powder electrostatic coating. The rate should be inclusive of all taxes, Transportations , labours , loading and unloading etc all complete.\nSafe Zone : 390 X 340 CM | BI01010001010000000000000515BI0100001295 | 1 | Nos |
| 183 | 174 | Person Body Twister :Fixing and installation of a three person body twister station: Size -131 X 100 X 133CM, that consists of three swivel stands that rotates but with a built in safety limiter that meets international safety standards as the arms and shoulders of the user are held square in the overhead hold that is fixed to a monolithic large arc tube centre pillar without convex sides & minimal deformation ergonomically curved. The Centre pillar has an OD of 89 mm, the wall thickness is min 3 mm & has a 8mm thick, 40cm gusset support at standard height of 1.4m. All fasteners to be of 304 stainless, Torx Anti Vandal Fasteners, All nuts enclosed in Polyamide Anti Vandal Caps. Finishing to be Metalized / Plasma zinc injection + Dupont/Alexta outdoor use color powder electrostatic coating.The rate should be inclusive of all taxes, transportations , labours , loading and unloading etc all complete.\n Safe Zone : 430 X 400 CM\n | BI01010001010000000000000515BI0100001296 | 1 | Nos |
| 184 | 175 | 2 Person Tai Chi Teflon Resistance Trainer: Supply, Fixing and Installation of Double Tai Chi Teflon Resistance Trainer: Size - 95 X 90 X 152 CM. The unit must consist of 4 wave shaped fan blades made of high grade polyethylene,with rotate free grips & without any holes or gaps to prevent entrapment. The blades are attached to an ergonomically curved, monolithic large arc tube centre pillar without convex sides & minimal deformation to provide a pleasing, modern aesthetic look. The wall thickness of the main curved centre pillar is minimum 3 mm & has a 8mm thick, 40cm gusset support. The blades are connected to high grade Teflon resistance maintenance free bearings. All fasteners to be of 304 stainless, Torx Anti Vandal Fasteners, All nuts enclosed in Polyamide Anti Vandal Caps. Finishing to be Metalized / Plasma zinc injection + Dupont/Alexta outdoor use color powder electrostatic coating.The rate should be inclusive of all taxes, Transportations , labours , loading and unloading etc all complete.\n Safe Zone : 400 X 390 CM\n | BI01010001010000000000000515BI0100001297 | 1 | Nos |
| 185 | 176 | Double Sit-Up Bench: Supply, Fixing and Installation of a Double Sit Up Bench: Size - 100 X 102 X 58 CM, that consists of a independent [separate] structures. The back pad and seat pad are fixed to the bench and are fabricated of Durable PE Panels. All fasteners to be of 304 stainless, Torx Anti Vandal Fasteners, All nuts enclosed in Polyamide Anti Vandal Caps. Finishing to be Metalized / Plasma zinc injection + Dupont/Alexta outdoor use color powder electrostatic coating. The rate should be inclusive of all taxes, Transportations , labours , loading and unloading etc all complete.\nSafe Zone : 400 X 402 CM\n | BI01010001010000000000000515BI0100001298 | 1 | Nos |
| 186 | 177 | PLANTATION :- Supplying and Planting of different plant / trees ( Supplying well grown plants bushy and healthy, minimum height as specified i.e. exposed height Basic rate should be including transportation,labours charges all leads & lifts. SHRUBS (i) AMARANTHUS TRICOLOR HYBRIDA\n\n | BI01010001010000000000000515BI0100001299 | 45 | Nos |
| 187 | 178 | AMARANTHUS CAUDATUS\n | BI01010001010000000000000515BI0100001300 | 27 | Nos |
| 188 | 179 | AMARANTHUS CAUDATUS GREEN\n | BI01010001010000000000000515BI0100001301 | 55 | Nos |
| 189 | 180 | AMARANTHUS HYPOCHONDRIACUS\n | BI01010001010000000000000515BI0100001302 | 19 | Nos |
| 190 | 181 | ALPINIA ZERUMBET\n | BI01010001010000000000000515BI0100001303 | 6 | Nos |
| 191 | 182 | ALPINIA PURPURATA | BI01010001010000000000000515BI0100001304 | 8 | Nos |
| 192 | 183 | BOUGANVILEA BOUGAINVILLEA GOLDEN GLOW\n | BI01010001010000000000000515BI0100001305 | 42 | Nos |
| 193 | 184 | BOUGAINVILLEA MARY PALMER \n | BI01010001010000000000000515BI0100001306 | 120 | Nos |
| 194 | 185 | BOUGAINVILLEA TOMATO RED\n | BI01010001010000000000000515BI0100001307 | 64 | Nos |
| 195 | 186 | BOUGAINVILLEA PERUVIANA LADY HUDSON\n\n | BI01010001010000000000000515BI0100001308 | 8 | Nos |
| 196 | 187 | BREYNIA NIVOSA NANA | BI01010001010000000000000515BI0100001309 | 51 | Nos |
| 197 | 188 | BREYNIA NIVOSA GREEN\n\n\n\n | BI01010001010000000000000515BI0100001310 | 232 | Nos |
| 198 | 189 | BREYNIA NIVOSA ROSEOPICTA | BI01010001010000000000000515BI0100001311 | 32 | Nos |
| 199 | 190 | COSMOS BIPINNATUS\n | BI01010001010000000000000515BI0100001312 | 26 | Nos |
| 200 | 191 | DURANTA LORENTZII GOLDII | BI01010001010000000000000515BI0100001313 | 62 | Nos |
| 201 | 192 | ERATHEMUM LAXIFORUM\n | BI01010001010000000000000515BI0100001314 | 26 | Nos |
| 202 | 193 | HELICONIA CARIBAEA GOLD\n | BI01010001010000000000000515BI0100001315 | 56 | Nos |
| 203 | 194 | HELICONIA HUMILIS\n | BI01010001010000000000000515BI0100001316 | 34 | Nos |
| 204 | 195 | HELICONIA METALLICA\n\n | BI01010001010000000000000515BI0100001317 | 27 | Nos |
| 205 | 196 | HELICONIA ORTHOTRICHA\n\n\n | BI01010001010000000000000515BI0100001318 | 4 | Nos |
| 206 | 197 | HELICONIA PSITTACORUM FIRE FLASH\n\n\n | BI01010001010000000000000515BI0100001319 | 21 | Nos |
| 207 | 198 | HELICONIA ROSTRATA\n | BI01010001010000000000000515BI0100001320 | 61 | Nos |
| 208 | 199 | HELIOTROPIUM INDICUM\n\n | BI01010001010000000000000515BI0100001321 | 28 | Nos |
| 209 | 200 | IRESINE LINDENII\n | BI01010001010000000000000515BI0100001322 | 23 | Nos |
| 210 | 201 | GOLDEN MELALEUCA\n | BI01010001010000000000000515BI0100001323 | 90 | Nos |
| 211 | 202 | MUSSAENDA RED\n | BI01010001010000000000000515BI0100001324 | 20 | Nos |
| 212 | 203 | PORTULACA OLERACEA | BI01010001010000000000000515BI0100001325 | 38 | Nos |
| 213 | 204 | PISONIA ALBA\n | BI01010001010000000000000515BI0100001326 | 65 | Nos |
| 214 | 205 | PISONIA ALBA VARIEGATA | BI01010001010000000000000515BI0100001327 | 29 | Nos |
| 215 | 206 | PSEUDOERANTHEMUM ARTOPURPUREUM TONGA | BI01010001010000000000000515BI0100001328 | 14 | Nos |
| 216 | 207 | PSEUDOERANTHEMUM RETICULATUM | BI01010001010000000000000515BI0100001329 | 19 | Nos |
| 217 | 208 | PSEUDOERANTHEMUM SINUATUM | BI01010001010000000000000515BI0100001330 | 26 | Nos |
| 218 | 209 | PSEUDOERANTHEMUM ARTOPURPUREUM VARIEGATUM\n | BI01010001010000000000000515BI0100001331 | 65 | Nos |
| 219 | 210 | WATER TOLERANT SPECIES :- ACORUS CALAMUS | BI01010001010000000000000515BI0100001332 | 26 | Nos |
| 220 | 211 | CHRYSOPOGON ZIZANIOIDES | BI01010001010000000000000515BI0100001333 | 15 | Nos |
| 221 | 212 | \nFESTUCA GLAUCA | BI01010001010000000000000515BI0100001334 | 123 | Nos |
| 222 | 213 | IRIS PALLIDA ARGENTEA | BI01010001010000000000000515BI0100001335 | 83 | Nos |
| 223 | 214 | PENNISETUM ALOPECUROIDES | BI01010001010000000000000515BI0100001336 | 26 | Nos |
| 224 | 215 | PENNISETUM CLANDESTINUM | BI01010001010000000000000515BI0100001337 | 10 | Nos |
| 225 | 216 | PENNISETUM PURPUREUM-GREEN | BI01010001010000000000000515BI0100001338 | 22 | Nos |
| 226 | 217 | PENNISETUM SETACEUM - PURPLE \n\n\n\n | BI01010001010000000000000515BI0100001339 | 26 | Nos |
| 227 | 218 | PANDANUS AMARYLTIFOLIUS | BI01010001010000000000000515BI0100001340 | 30 | Nos |
| 228 | 219 | STIPA TENUISSIMA | BI01010001010000000000000515BI0100001341 | 14 | Nos |
| 229 | 220 | PHYLLOSTACHYS SAGITTATA | BI01010001010000000000000515BI0100001342 | 22 | Nos |
| 230 | 221 | PHALARIS SPECIES | BI01010001010000000000000515BI0100001343 | 17 | Nos |
| 231 | 222 | GLYCERIA MAXIMA VARIEGATA | BI01010001010000000000000515BI0100001344 | 55 | Nos |
| 232 | 223 | CYMBOPOGON FLOXOSUS | BI01010001010000000000000515BI0100001345 | 44 | Nos |
| 233 | 224 | TYPHA AUGUSTIFOLIA-HERB | BI01010001010000000000000515BI0100001346 | 53 | Nos |
| 234 | 225 | PHRAGMITES AUSTRALIS (REEDS) | BI01010001010000000000000515BI0100001347 | 25 | Nos |
| 235 | 226 | HYDRILLA VERTICILLATA | BI01010001010000000000000515BI0100001348 | 6 | Nos |
| 236 | 227 | SCIRPUS ARTICULATUS | BI01010001010000000000000515BI0100001349 | 39 | Nos |
| 237 | 228 | SCIRPUS CYPERINUS | BI01010001010000000000000515BI0100001350 | 33 | Nos |
| 238 | 229 | SCIRPUS MICROCARPUS | BI01010001010000000000000515BI0100001351 | 11 | Nos |
| 239 | 230 | TYPHA LATIFOLIA | BI01010001010000000000000515BI0100001352 | 6 | Nos |
| 240 | 231 | CLIMBERS :-HEDERA HELIX(ENGLISH IVY) | BI01010001010000000000000515BI0100001353 | 90 | Nos |
| 241 | 232 | GLORIOSA SUPERBA | BI01010001010000000000000515BI0100001354 | 105 | Nos |
| 242 | 233 | THUNBERGIA GRANDIFLORA\n | BI01010001010000000000000515BI0100001355 | 30 | Nos |
| 243 | 234 | THUNBERGIA FRAGRANS\n | BI01010001010000000000000515BI0100001356 | 30 | Nos |
| 244 | 235 | THUNBERGIA MYSORENSIS | BI01010001010000000000000515BI0100001357 | 30 | Nos |
| 245 | 236 | JACQUEMONTIA PANICULATA\n | BI01010001010000000000000515BI0100001358 | 112 | Nos |
| 246 | 237 | FLORAL AND AROMA PLANTS :-ACALYPHA HISPIDA | BI01010001010000000000000515BI0100001359 | 83 | Nos |
| 247 | 238 | ACALYPHA GODSEFFIANA | BI01010001010000000000000515BI0100001360 | 43 | Nos |
| 248 | 239 | ACALYPHA HISPIDA ALBA\n | BI01010001010000000000000515BI0100001361 | 38 | Nos |
| 249 | 240 | ACALYPHA SPECIES COPPERLEAF\n | BI01010001010000000000000515BI0100001362 | 55 | Nos |
| 250 | 241 | IXORA CHINENSIS\n | BI01010001010000000000000515BI0100001363 | 96 | Nos |
| 251 | 242 | IXORA SINGAPORE HYBRID\n | BI01010001010000000000000515BI0100001364 | 24 | Nos |
| 252 | 243 | IXORA NERIFOLIA | BI01010001010000000000000515BI0100001365 | 122 | Nos |
| 253 | 244 | TECOMA CAPENSIS | BI01010001010000000000000515BI0100001366 | 3 | Nos |
| 254 | 245 | MURRAYA PANICULATA | BI01010001010000000000000515BI0100001367 | 20 | Nos |
| 255 | 246 | GROUND COVEERS :-VERBENA TENERA PINK | BI01010001010000000000000515BI0100001368 | 105 | Nos |
| 256 | 247 | VERBENA X HORTENSIS\n | BI01010001010000000000000515BI0100001369 | 77 | Nos |
| 257 | 248 | ALTERNANTHERA SESSILIS\n | BI01010001010000000000000515BI0100001370 | 56 | Nos |
| 258 | 249 | ALTERNANTHERA BETTZICKIANA RED\n | BI01010001010000000000000515BI0100001371 | 219 | Nos |
| 259 | 250 | ALTERNANTHERA BETTZICKIANA GREEN\n | BI01010001010000000000000515BI0100001372 | 127 | Nos |
| 260 | 251 | ALTERNANTHERA BETTZICKIANA WHITE\n | BI01010001010000000000000515BI0100001373 | 217 | Nos |
| 261 | 252 | ALTERNANTHERA DENTATA PURPLE KINGHT\n | BI01010001010000000000000515BI0100001374 | 117 | Nos |
| 262 | 253 | OPHIPOGON GREEN\n | BI01010001010000000000000515BI0100001375 | 26 | Nos |
| 263 | 254 | OPHIOPOGON PLANISCAPUS 'NIGRESCENS'\n | BI01010001010000000000000515BI0100001376 | 103 | Nos |
| 264 | 255 | OPHIOPOGON VARIEGATA\n | BI01010001010000000000000515BI0100001377 | 86 | Nos |
| 265 | 256 | LANTANA CAMARA ERECTA RED\n | BI01010001010000000000000515BI0100001378 | 17 | Nos |
| 266 | 257 | LANTANA CAMARA SEMI ERECTA LEMON DROP\n | BI01010001010000000000000515BI0100001379 | 63 | Nos |
| 267 | 258 | LANTANA CAMARA ERECTA DEPRESSA\n | BI01010001010000000000000515BI0100001380 | 24 | Nos |
| 268 | 259 | LANTANA CAMARA SEMI ERECTA MULTICOLOR\n | BI01010001010000000000000515BI0100001381 | 64 | Nos |
| 269 | 260 | LANTANA SELLOWIANA\n | BI01010001010000000000000515BI0100001382 | 263 | Nos |
| 270 | 261 | CHLOROPHYTUM COMOSUM\n | BI01010001010000000000000515BI0100001383 | 92 | Nos |
| 271 | 262 | CHLOROPHYTUM COMOSUM VARIEGATUM\n | BI01010001010000000000000515BI0100001384 | 140 | Nos |
| 272 | 263 | CHLOROPHYTUM COMOSUM VITTATUM\n | BI01010001010000000000000515BI0100001385 | 27 | Nos |
| 273 | 264 | POGONATHERUM PANICEUM\n | BI01010001010000000000000515BI0100001386 | 66 | Nos |
| 274 | 265 | PILEA GLAUCA\n | BI01010001010000000000000515BI0100001387 | 52 | Nos |
| 275 | 266 | PILEA MOLLIS\n | BI01010001010000000000000515BI0100001388 | 99 | Nos |
| 276 | 267 | CAREX BRONZE\n | BI01010001010000000000000515BI0100001389 | 70 | Nos |
| 277 | 268 | CAREX PRIARIE FIRE\n | BI01010001010000000000000515BI0100001390 | 26 | Nos |
| 278 | 269 | ACORUS GRAMINEUS VARIEGATUS | BI01010001010000000000000515BI0100001391 | 353 | Nos |
| 279 | 270 | RUELLIA BRITTONIANA\n | BI01010001010000000000000515BI0100001392 | 165 | Nos |
| 280 | 271 | MEDIUM SHRUB :- SALOCASIA ESCULATA BLACK MAGIC | BI01010001010000000000000515BI0100001393 | 39 | Nos |
| 281 | 272 | CALATHEA LEOPARDINA\n | BI01010001010000000000000515BI0100001394 | 26 | Nos |
| 282 | 273 | CALATHEA LUTEA\n | BI01010001010000000000000515BI0100001395 | 22 | Nos |
| 283 | 274 | CALATHEA MAKOYANA\n | BI01010001010000000000000515BI0100001396 | 45 | Nos |
| 284 | 275 | TALL SHRUBS :- ALOCASIA MACRORRHIZA\n | BI01010001010000000000000515BI0100001397 | 87 | Nos |
| 285 | 276 | ALOCASIA ESCULATA\n | BI01010001010000000000000515BI0100001398 | 18 | Nos |
| 286 | 277 | ALOCASIA CUCULLATA | BI01010001010000000000000515BI0100001399 | 23 | Nos |
| 287 | 278 | COST OF IRRIGATION Inclsive Machinery,labour cost,transportation and accessories etc.all complete. Inclusive of all taxes | BI01010001010000000000000515BI0100001400 | 1 | Job |
| 288 | 279 | 2nd Year Operation , Maintenance like cleaning and sweeping. Maintenance of plants and trees, Machanical equipment and total security of the park to be done as direction of the Engineer-in-Charge (@ 2.25% of Cost). | BI01010001010000000000000515BI0100001401 | 1 | 1Job |
| 289 | 280 | 3rd Year Operation , Maintenance like cleaning and sweeping. Maintenance of plants and trees, Machanical equipment and total security of the park to be done as direction of the Engineer-in-Charge (@ 3.50% of Cost). | BI01010001010000000000000515BI0100001402 | 1 | 1 Job |
| 290 | 281 | 4th Year Operation , Maintenance like cleaning and sweeping. Maintenance of plants and trees, Machanical equipment and total security of the park to be done as direction of the Engineer-in-Charge (@ 4.50% of Cost). | BI01010001010000000000000515BI0100001403 | 1 | 1 Job |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
