Bidhan Chandra Krishi Viswavidyalaya has published Equipment Purchase For Scientific Research. Submission Date for this Tender is 04-02-2020. Clothing Accessories Tenders in RRSS Village Uttar Panchpota,Chakdaha, West Bengal. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 14-Jan-2020 | Date extension | Date | 04-02-2020 |
Name of Work: RRSS (NAZ), BCKV, Chakdaha | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Note :The work includes the following: (1) The supply and installation of equipment with accessories; (2) Testing of equipment; (3) Provide, one copy each of following documentation (both on CD/DVD and printed manual – (i) installation manual, (ii) operating manual, and (iii) service manual; (4) Any other work required for equipment making functional up to the satisfaction. | |||
2 | 1.01 | BOD Incubator : Capacity 200 l | item1 | 1 | Nos |
3 | 1.02 | Digital pH meter : Range 0-14 pH within accuracy of ±0.05 pH, complete with combination electrode | item2 | 1 | Nos |
4 | 1.03 | Electronic Weighing balance :Weighing capacity upto 10 g and precision upto 4 digits | item3 | 1 | Nos |
5 | 1.04 | Balance : A) Precision balance: \nTechnical Specifications Capacity : 210 g with External Calibration Readability (d) : 0.001g Repeatability (Std Dev) : 1mg Linearity : 2 mg Application Modes : Weighing, parts counting, percent Weighing Units : mg, g, ct, oz, dwt, tical, tola, mommes, baht, grain, mesghal, Newton, ozt, teals, custom Platform Size (mm) : 120 diameter Cal Weight-Span (g): 100g or 200g Cal Weight-Linearity (g): 100g + 200g Taring Time: 1 second Stabilization Time : 3 seconds Gross Weight : 4.5 kg Shipping Weight : 6.9 kg Balance Dimensions : 19.6 x 28.7 x 32 (cm) Carton Dimensions : 49.5 x 39.5 x 52.2 (cm) Draftshield : Yes Operating Conditions : -10°C to 40°C at 10% to 80% relative humidity, non- condensing, up to 4000m above sea level Storage Temperature : -40°C to 70°C at 10% to 80% relative humidity, non-condensing\nB) Table Top Balance \nSalient Feature: Built in rechargeable battery for continues use. Rust Proof Stainless Steel Platter. Auto power off, Battery indicator. Fast weighing response time. Overload Protection Design. 01 6,000.00 Technical Specifications Capacity: 10 kg with External Calibration Readability: 0.5 g Repeatability (±): 0.5 g Linearity (±): 1.0 g Pan Size (mm) : 210 x 260 diameter Display: LED Power Supply: AC 220V / 50-60 Hz Gross Weight: 3.5 kg Balance Dimensions: 365 x 320 x 160 (mm) Operating Temp. : 10°C-40°C \n | item4 | 1 | Nos |
6 | 1.05 | Seed germinator (Single chamber) : 5-600 C, 70 x 550 x 875 mm (280 l) | item5 | 1 | Nos |
7 | 1.06 | Microwave oven : Plastic body (Branded) | item6 | 1 | Nos |
8 | 1.07 | Double Distillation unit : 2 l / hr capacity | item7 | 1 | Nos |
9 | 1.08 | Vernier Caliper (Digital) : Measurement: 0.1 mm to 10 cm, Weight less than 200g, data storage card system | item8 | 1 | Nos |
10 | 1.09 | Digital Chlorophyll content meter (SPAD meter) : Measurement method: Optical density difference at two wavelengths\nMeasurement area: 2 mm×3 mm\nSubject thickness: 1.2 mm maximum\nSubject insertion depth: 12 mm (with stopper having position adjustable from 0 to 6 mm)\nLight source: 2 LED elements\nReceptor: 1 SPD (silicon photodiode)\nDisplay: LCD panel showing 4 digit measurement value (values shown to first decimal place) and 2digit number of measurements; Trend graph of values in memory can also be shown.\nDisplay range: 9.9 to 199.9 SPAD units\nMemory function: Memory capacity for up to 30 values; Calculation/display of average of data in memory also possible\nPower source: 2 Aasize alkaline batteries\nBattery life: More than 20,000 measurements \nMinimum interval between measurements: Approx. 2 seconds\nAccuracy: Within ±1.0 SPAD units (for SPAD value between 0.0 and 50.0 under normal\ntemperature/humidity)\nRepeatability: Within ±0.3 SPAD units\n\nDimensions: 78 (W) ×164 (H) ×49 (D) mm\nWeight: 200 g (excluding batteries)\n | item9 | 1 | Nos |
11 | 1.1 | Digital refractometer : Refractive index (nD): 1.32422 to 1.58000\nBrix : 0.000 to 100.000% (5- 75 0C ATC)\n | item10 | 1 | Nos |
12 | 1.11 | Binocular microscope : Model: CH 20 Built in halogen light complete set | item11 | 2 | Nos |
13 | 1.12 | Trinocular Stereo-zoom Microscope with both of transmitted Incident light, microscopy camera : Microscope Body Stemi 508 doc -Apochromatic greenough system - Camera port with interface 60N with switchover 100vis/100doc right -Manually operable zoom 8:1 (0.63x...5.0x) on both sides -Switchable zoom clickstops 0.63x-0.8x-1x-1.25x-1.6x-2x-2.5x-3.2x-4x-5x -Free working distance 92 mm (without dust protection glass) -Viewing angle 35° with adjustable interocular distance 55...75 mm -Eyepiece mount 30 mm with maximum field number 23 mm -Mount D=76 mm for Stemi mount/Mount S - Interface D=53 mm for illuminators -Thread M49/50 for front optics or analyzer Additionally included: - Eyepieces PL 10x/23 Br. foc. - Dust protection glass M50 with M49x0.75 - Camera adapter 60N C-Mount 2/3" 0.5x\nDust Protection Glass M50 with M49x0.75\nHigh power goose neck long light guide with focusing attachment, filters etc.\nCold-light source CL 6000 LED (D)- up to 600 lm light flux at 9 mm fiber output dia., ca. 6200K color temperature- min. 50,000 operating hours until intensity drop to 70%- control of intensity and 6 memory cells by rotary push knob and LCD- 10 mm collet chuck with sensor for 1500 light guides- filter slider for 2 mounted filters 35x26x4 mm and with free opening- max. 70W wide-range supply for flicker free light, silent fan- 2.5 mm jack bush for on/off via optional foot button S, USB socket- country-specific mains cord\nDay Light Filter CL LED (D)\nHalogen Light Filter CL LED (D)\nGoose-neck light guide 1500, 4.5/600 mm (D)\nFocusing attachment d=6 mm without filters\nCoarse/fine drive with T column 350mm 10kg load capacity; compatible with base 300 or -9902 version of stand base 450 and to configurations without nosepiece\nMount S with diam. 76 mm support\nTransillumination base 300\nTransillumination base 300WxDxH 322x373x42mm stand base with 2x M8 threaded holes,90 white-light LED transmitted light, brightness knob, socket forfootswitch S, straightly movable diaphragm and 3 position turret for:1. Bright Field plus and oblique-light contrast by shiftable diaphragm2. homogenous bright field with 67mm dia.3. all-side dark field, also unilateral by movable diaphragm;Incl. glass plate D=120mm, DF insert diaphragm 28/84,table-top supply 24V 60W and country-specific mains cord;\nFront Optics 5 Apo 2.0x \nMechanical stage S 150x100 R (D)3-plates mechanical stage 322x251x28 mm for max. load 3 kg; with horizontal coaxial drive 115 mm right,interface d=120 mm and 237x157 mm support for insert plate S; useable with trans-illumination\nInsert plate S, glass 237x157x3mm (D)\nAdd freight & insurance\nMicroscopy Camera AxioCamERc 5s Rev.2 with driver software and connection USB 2.0 Y-cable, 2 m. (need PC for installation)\n\n | item12 | 1 | Nos |
14 | 1.13 | Adjustable Lighted Magnifying Glass LED Head Headband Magnifier with lens : 1. Lens Diameter: 87mm/34.25inch\n2. Magnification: 1.5 x ,3x,9.5x,11x Magnifier\n\n3. Dimensions: 9.84x 7.68 x 1.57 in /25 x 19.5 x 4cm(L x W x H)\n4. Color: Black\n5. Weight: 10.48oz/297g\n6. Package Dimensions: 10.43 x 8.07 x 2.56inch/28.5 x 20.5 x 6.5cm(L x W x H)\n7. Max Headband Diameter: 6.69inch/17cm\n8. Power:6 x AA Batteries (Not Included)\n | item13 | 2 | Nos |
15 | 1.14 | Digital pocket scale : 500 g -0.01 g | item14 | 1 | Nos |
16 | 1.15 | Portable vacuum emasculator for rice : Battery operated Portable Vaccum emasculator | item15 | 1 | Nos |
17 | 1.16 | Magnetic Hotplate Stirrers : LED display for precise monitoring of temperature t A wide speed range of 0 to 1500rpm t Max. Heating plate temperature 550°C t External temperature control is possible by connecting the temperature sensor(PT 1000) with accuracy at ±0.2°C t The “HOT” warning will flash when the work plate temperature is above 50°C even the hotplate is turned off | item16 | 1 | Nos |
18 | 1.17 | Photoelectric Colorimeter : Wave length range: 400-700 nm with 8 optical filters\nFilters peak wavelength: 420 nm, 440 nm, 490 nm, 520 nm, 540 nm, 570 nm, 600 nm, 700 nm\nMeasuring Mode: % T, Abs, Conc& K factor\nPhotometric Resolution: 0.1 % T, 0.001 Abs up to 1.999 Abs (O.D.)\nDisplay: 2 line 16 character LCD\nK factor range: 0 to 1999\nConcentration: 0 to 2 times the absorbance\nSample Volume: 1 ml in 4 ml test tube\nSource: White LED\nDetector: Hermetically sealed photodiode\nPrinter port: Epson compatible 80 column D.M. Printer\nAccessories: Four test tubes, two glass cuvettes\n | item17 | 1 | Nos |
19 | 1.18 | Water Bath : Temperature Range: -20 to 100°C Bath Volume: 5 Lit Heater Capacity: 2000 watts Cooling Capacity @ 20 o C: 300 watts Pump Type: force Flow Rate max: 12 Lit / min Pump Pressure: 300 mbar Bath opening ( w x d x h): 13 x 12 x 15 cm Overall dimensions ( w x d x h): 25 x 45 x 62.5 cm Supply voltage: 230 / 50 Volts / Hz Recommended bath liquid 5 to 40°C -- Distilled Water –20 to 40°C -- Water with Antifreeze In applications below 5°C the water has to be mixed with an antifreeze. In doing so, the amount of antifreeze added should cover a temperature range 5°C lower (but max –20°C) than the operating temperature of the particular application. This will prevent the water from gelling (freezing) in the area of the evaporating coil the surface area of which is much colder than the working temperature. An excess of antifreeze deteriorates the temperature accuracy due to its high viscosity. Filling with heat transfer liquid: Filling level of the interior bath: max. up to 2.0 cm below the cover plate, When working with water or water with antifreeze or with oil below ambient temperature: The filling level should be 2 cm below the deck plate. | item18 | 1 | Nos |
20 | 1.19 | Cooling Centrifuge : With maximum speed 14000 rpm and 18 places for 1.5/2 ml tubes; temperature range 0-40°C | item19 | 1 | Nos |
21 | 1.2 | Minus 20 degree Centrigrade Freezer | item20 | 1 | Nos |
22 | 1.21 | Centrifuge 5424 R : RPM 100-15000, Temp -10-400 C, Power consumption 350 W max. WxDxH 29x48x26 | item21 | 1 | Nos |
23 | 1.22 | Refrigerator : Digital Inverter Compressor and 10 Year Warranty. \nDigital Inverter Compressor has 7 adjustable speeds to suit different cooling demands. \nDoor alarm, LED lights.\nTwin cooling, twist & ice maker, water and ice dispenser\n586 gross capacity and 501 L net capacity, 5 racks\n | item22 | 2 | Nos |
24 | 1.23 | Electrophoretic apparatus with power pack : Output range: 0- 500 V adjustable IV steps; 500 mV fully adjustable I mA steps; Type of output: constant voltage or constant current; Output terminals: 04 pare in parallel, Timer: 1-999 min; Display: 3 digit digital; Input protection: \n\nFuge on both hot and neutral; Input power: 220 VAC/50 HZ; Body: made by metal steel power coated \n | item23 | 1 | Nos |
25 | 1.24 | UV VIS Digital spectrophotometer : 200 -1000 nm with all accessories | item24 | 1 | Nos |
26 | 1.25 | Flame photometer : With Na, K filters and compressor | item25 | 1 | Nos |
27 | 1.26 | Incubator shaker : Steel cabinet, speed range: 52-300 rpm; with different flask capacity and temperature controlling system | item26 | 1 | Nos |
28 | 1.27 | Moisture Probe : Product Details:\nMain Unit Portable Instrument, Easy carried in a case.\nPower Supply: 110/220 VAC, 50-60 Hz\nMoisture Range: 9% - 30%\nTare Range: Up-to-full Capacity\nBatteries: SMF chargeable battery, 12 V, 6 Ampere.\nDisplay: LCD Display\nFeatures\n• • Single handed operation to determine the moisture content\n• • User-friendly visualization display.\n• • Easy to Operate\n• • Profile programming system to select the required option for drying.\n• • User-friendly operations for time and temperature analysis & selection.\n• • Large LCD display for accurate results.\n• • Improved repeatability for better results.\n | item27 | 1 | Nos |
29 | 1.28 | Gradient PCR : 96 Well Thermal cycler system with 6 separate peltier blocks to provide independent temperature zones for gradient PCR | item28 | 1 | Nos |
30 | 1.29 | Gel Doc : Specification - DNA, RNA and protein gel documentation (imaging) system\n1. Gel documentation instrument for DNA/RNA/Protein applications\n2. 16-bit (65 536 grey levels) CCD camera with passive cooling facility and USB3 connection\n3. Camera resolution should = 5 megapixels\n4. Inbuilt large 12” High contrast medical grade touch screen display \n5. Stainless steel darkroom \n6. 4 positions filter wheel should be supplied with the 590 nm interferential filter with the system for Ethidium bromide application\n7. Auto-exposure and automatic illumination control \n8. Motorized zoom lens \n9. Slide-out UV Trans-illuminator (UV 312nm) with imaging area of 20x20 cm \n10. Both UV to While light and UV to blue light conversion screen should be provided \n11. A complete library that contains the excitation and the emission spectra of the main fluorophores used in modern molecular biology laboratory should be a built-in feature of the software. It also should suggest the best possible system configuration in terms of light source excitation, emission filter and sensitivity level of applications to ensure reproducibility and ease of use. \n12. Capable to use a large number of dyes such as Ethidium Bromide, Sybr-Safe, Sybr-Green, Gel-Red, Gel-Green, Sybr-gold, GFP, Pro-Q Emerald 300, Sypro-Ruby, FITC, DAPI, Coomassie blue, silver stain, Ponceau S Red, copper stain, zinc stain…\n13. UV should shut-off automatically after few minutes of non-use\n14. 7 USB ports\n15. Should be upgradable for RGB EPI light module for future application \n16. One branded laptop should be provided alongwith the system with multiuser licensed image analysis software\n• Company should have at least 20 installations in Eastern India.\n\n• Manufacturer should have own services engineer base in Kolkata. \n Door delivery and warranty + Maintenance for2 + 3 = 5yrs\n | item29 | 1 | Nos |
31 | 1.3 | Autoclave Vertical Fully Automatic Digital : Chamber Volume (L): 50 \nTemperature Sterilization Temp. (°C): 110 to 123\nTemperature Melting Temp. (°C): 60 to 100\nPressure Sterilization at 121º (kg/cm2): 1.1 to 1.2\nPressure Gauge range in analog (Mpa): - 0.1 to 0.6\nLoad per baskets (Kg): 10\nBasket dimension (O x H) (mm): 380 x 180\nPro-programs: Standard modes (Decontamination, Solids Sterilization, Liquids Sterilization, Melting): Program modes \nDoor delivery and warranty + Maintenance for 5yrs\nOptional \nLocal make, Chamber Volume (L): 50 \nTemperature Sterilization Temp. (°C): 110 to 123\nTemperature Melting Temp. (°C): 60 to 100\nPressure Sterilization at 121º (kg/cm2): 1.1 to 1.2\nPressure Gauge range in analog (Mpa): - 0.1 to 0.6\nDoor delivery and warranty + Maintenance for 5yrs\n | item30 | 1 | Nos |
32 | 1.31 | OVEN : Hot air oven (size: 14 x 14 x14 “); Temp: ambient + 5 to 250C, accuracy +/- 1C, double wall .outerMS power coated inner SS, 3 side heating element, solid doorwith lock . size: 14 x 14 x 14 inch, capacity : 45L , with timer : 0 –24 Hrs , digital temperature indicator and controller and micropresser based PID controller | item31 | 2 | Nos |
33 | 1.32 | Diesel Generator (Branded) : 3.5 KV, Silent type | item32 | 1 | Nos |
34 | 1.33 | Power operated Paddy thresher : Single crop; It operates on PTO shaft\nPower Rating: 35 & above HP tractor, Feeding Chute (Hopper), Drum type (Axial Flow) Threshing rooter with fixed threshing rooter with fixed threshing bolt system\nDrum size: Length 65 inches; Diameter: 20 inches\nClearance adjusting concave winnowing 3 blowers and 2 filters are provided for cleaning the paddy\nSize : Standard\n \n | item33 | 1 | Nos |
35 | 1.34 | Growth Chamber (10 ft. x 12 ft.) : Inside laboratory, including temp. and humidity control, racks etc. and other accessories to be installed. | item34 | 1 | Nos |
36 | 1.35 | AC (Branded) : 1.5 t | item35 | 1 | Nos |
37 | 1.36 | Aquaguard : Auro (New Model) | item36 | 1 | Nos |
38 | 1.37 | Seed keeping racks : Size: 900 mm W x 450 mm D x 1800 mm H\nSpecification: Made of ply and laminate\n | item37 | 1 | Nos |
39 | 1.38 | G P S : Display Type: TFT, 2.6 inch Display Size, w x H x D: 66 mm x 152 mm x 30 mm, Connectivity: USB | item38 | 1 | Nos |
40 | 1.39 | Desktop computer : Intel Core I3 7th Gen/4 GB RAM, 1 TB HDD/DVD Writer/19.5” LED TFT Monitor, Key Board & Mouse/Windows 10 Home Basic, single function laser printer with 12A toner, 600 VA UPS, 1 Year Warranty. | item39 | 1 | Nos |
41 | 1.4 | Laptop : Core i3 6th Gen –(4 GB/1 TB HDD/Windows 10 Home), I(15.6 inch, Black, ) with Carry Bag | item40 | 2 | Nos |
42 | 1.41 | Pendrive : 64 GB | item41 | 4 | Nos |
43 | 1.42 | External hard disk 2 TB | item42 | 1 | Nos |
44 | 1.43 | Pressure cooker 20 lit | item43 | 1 | Nos |
45 | 1.44 | LCD Projector, roof hanging tools and its installation LCD projector, VPL DX220 | item44 | 1 | Nos |
46 | 1.45 | Projector Screen Imported motorized screen, size: 5 ft. X 7 ft. with 100´´ diameter | item45 | 1 | Nos |
47 | 1.46 | LCD project pointer Wireless pointer (Black) | item46 | 1 | Nos |
48 | 1.47 | Full HD LED Television 123.2 cm full HD smart LED TV | item47 | 1 | Nos |
49 | 1.48 | Sound and speaker system Amplifier, paging microphone, column speaker | item48 | 1 | Nos |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail