Annual Repair And Maintenance Of Bop Buildings At Bop R R Kutti , Satrasal , Jaskal , Biskhawa , Sonahat And Kutti Lakhimari Of 110 Bn Bsf Under Shq Bsf Dhubri
Tender Value
4.76 Lakhs
Estimated cost
Bid Submission
17 Jan 2020
0 days left
EMD
9600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
BOPs of 110 Bn BSF → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Annual Repair And Maintenance Of Bop Buildings At Bop R R Kutti , Satrasal , Jaskal , Biskhawa , Sonahat And Kutti Lakhimari Of 110 Bn Bsf Under Shq Bsf Dhubri
BOQ
| Name of Work: < Annual Repair & Maintenance of BOP buildings at BOP R R Kutti, Satrasal, Jaskal, Biskhawa, Sonahat and Kutti Lakhimari of 110 Bn BSF under SHQ BSF Dhubri > | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : | item1 | ||
| 2 | 1.01 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | item2 | 0.78 | cum |
| 3 | 1.02 | 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) | item3 | 2.28 | cum |
| 4 | 2 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Kiln seasoned and chemically treated hollock wood 30 mm thick | item4 | 12.96 | sqm |
| 5 | 3 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | item5 | 11.7 | sqm |
| 6 | 4 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Kiln seasoned and chemically treated hollock wood | item6 | 13.65 | sqm |
| 7 | 5 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm | item7 | 11 | each |
| 8 | 6 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm | item8 | 22 | each |
| 9 | 7 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm | item9 | 37 | each |
| 10 | 8 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate | item10 | 55.5 | sqm |
| 11 | 9 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m² | item11 | 43.2 | sqm |
| 12 | 10 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/m² | item12 | 34 | metre |
| 13 | 11 | Providing and fixing plain Multipurpose Cement board ( High Pressure steam cured ) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete (frame work to be paid separately) : 6 mm thick cement board | item13 | 25.92 | sqm |
| 14 | 12 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) | item14 | 113.7 | sqm |
| 15 | 13 | Neat cement punning. | item15 | 54 | sqm |
| 16 | 14 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) | item16 | 73.68 | sqm |
| 17 | 15 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work | item17 | 71.3 | sqm |
| 18 | 16 | Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. | item18 | 1282.05 | sqm |
| 19 | 17 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead : With cement mortar 1:4 (1 cement : 4 fine sand) | item19 | 25.2 | sqm |
| 20 | 18 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm | item20 | 16.32 | sqm |
| 21 | 19 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below | item21 | 9 | each |
| 22 | 20 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White | item22 | 7 | each |
| 23 | 21 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | item23 | 7 | each |
| 24 | 22 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. | item24 | 7 | each |
AI Tender Summary
Tender Timeline
Jan 11, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedJan 17, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 20, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender