| 1 | 1 | centre 73 Anganvady | BI01010001010000000000000515BI0100001113 | | |
|---|
| 2 | 1.001 | 21.5 : Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ). | BI01010001010000000000000515BI0100001114 | 14.322 | kg |
|---|
| 3 | 1.002 | 50.12.4.1 : Providing and fixing false ceiling with 7.5 mm thick PVC plain panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete (aluminium frame work shall be paid separately) | BI01010001010000000000000515BI0100001115 | 26.04 | sqm |
|---|
| 4 | 1.003 | 13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | BI01010001010000000000000515BI0100001116 | 21.76 | sqm |
|---|
| 5 | 1.004 | 13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work | BI01010001010000000000000515BI0100001117 | 267.75 | sqm |
|---|
| 6 | 1.005 | 13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | BI01010001010000000000000515BI0100001118 | 56.475 | sqm |
|---|
| 7 | 2 | No 68 Malamakkavu Anganvady | BI01010001010000000000000515BI0100001119 | | |
|---|
| 8 | 2.001 | 51.18.12.7 : Providing and fixing G.I. pipes complete with G.I. fittings (Cost of fittings to be paid separately) External work - 65 mm nominal dia | BI01010001010000000000000515BI0100001120 | 5.4 | metre |
|---|
| 9 | 2.002 | 10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | BI01010001010000000000000515BI0100001121 | 258.6 | kg |
|---|
| 10 | 2.003 | 13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work | BI01010001010000000000000515BI0100001122 | 223.5 | sqm |
|---|
| 11 | 2.004 | 13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | BI01010001010000000000000515BI0100001123 | 47.025 | sqm |
|---|
| 12 | 3 | Ummathoor Nirappu No 78 | BI01010001010000000000000515BI0100001124 | | |
|---|
| 13 | 3.001 | 10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | BI01010001010000000000000515BI0100001125 | 86 | kg |
|---|
| 14 | 3.002 | od374307/2019_2020 : Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.30 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | BI01010001010000000000000515BI0100001126 | 8.6 | sqm |
|---|
| 15 | 3.003 | od374315/2019_2020 : Providing and fixing 15 cm wide 45 cm overall semi circular PVC Roofing gutter with iron brackets 40 x 3 mm size , bolts,nuts and washers etc including making necessary connections with rain water pipes complete. | BI01010001010000000000000515BI0100001127 | 8.6 | metre |
|---|
| 16 | 3.004 | 21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) | BI01010001010000000000000515BI0100001128 | 2.7 | kg |
|---|
| 17 | 3.005 | 21.3.1 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness | BI01010001010000000000000515BI0100001129 | 4.2 | sqm |
|---|
| 18 | 3.006 | 13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work | BI01010001010000000000000515BI0100001130 | 264.75 | sqm |
|---|
| 19 | 3.007 | 13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | BI01010001010000000000000515BI0100001131 | 61.2 | sqm |
|---|
| 20 | 4 | Anganvady 80 Noorukad | BI01010001010000000000000515BI0100001132 | | |
|---|
| 21 | 4.001 | 21.5 : Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ). | BI01010001010000000000000515BI0100001133 | 11.798 | kg |
|---|
| 22 | 4.002 | 50.12.4.1 : Providing and fixing false ceiling with 7.5 mm thick PVC plain panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete (aluminium frame work shall be paid separately) | BI01010001010000000000000515BI0100001134 | 21.45 | sqm |
|---|
| 23 | 5 | Anganvady 89 | BI01010001010000000000000515BI0100001135 | | |
|---|
| 24 | 5.001 | 10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | BI01010001010000000000000515BI0100001136 | 1073.5 | kg |
|---|
| 25 | 5.002 | od386063/2019_2020 : Providing and fixing precoated galvonised iron profile sheet s (size ,shape and pitch of corrugation as approved by Engineer -in-charge ).30 mm(+.05%) total coated thickness with zinc coating 120 grams per sqm as per IS-277,in 240 MPA steel grade,5-7 microns epoxy primer on both sides of the sheet and polyster top coat 15-18 microns .Steel should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12.00 mtrs or as desired by Engineer -in -charge.The steel shall be fixed using self drilling /self tapping screws of size (5.5x55 mm)with EPDM seal,complete up to any pitch in horizontal,vertical or curved surfaces,excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required | BI01010001010000000000000515BI0100001137 | 142.5 | sqm |
|---|
| 26 | 5.003 | 51.18.12.8 : Providing and fixing G.I. pipes complete with G.I. fittings (Cost of fittings to be paid separately) External work - 80 mm nominal dia | BI01010001010000000000000515BI0100001138 | 12 | metre |
|---|
| 27 | 5.004 | 4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001139 | 0.564 | cum |
|---|
| 28 | 5.005 | 50.9.4.1 : Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Anjili/ Jack wood | BI01010001010000000000000515BI0100001140 | 4.2 | sqm |
|---|
