Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 01-02-2020 | Change in critical dates | Date | 08-02-2020 |
| Name of Work: PROVN OF CERTAIN MINOR, REVENUE AND LBW WORKS IN TECH AREA AT AF STN MAHARAJPUR | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc), or insulation boards/slabs/blankets, any thickness any type including cover fillets, complete all as specified and directed. | BI01010001010000000000000515BI0100001112 | 10 | Sqm |
| 2 | 1.01 | S&F MS galvanised powder coated suspended false ceiling system with grid of size 605mm x 605mm, consisting of mild steel galvanised powder coated main runner of size 24mmx32mm and cross Tee of size 24mm x 27mm and wall angle of size 22.2mmx22.2mm, suspended with 4 mm dia GI wire hanger at 1200 mm spacing, fixed with steel dash fasteners or from purlin of roofs with butterfly clips etc includding 12mm thick gypsum board (Semiperforted) in ceiling fixed to GI snap grid frame work with hold screws, of any height upto 8.5m with adjustable cleat of J hook including making provision for housing light fitting, AC grils etc complete including fixing, re-fixing false ceiling lights, wastage T&P as per manufacturer's instructions and complete all as specified and directed by Engr-in-Charge. complete all as specified.. | BI01010001010000000000000515BI0100001113 | 10 | Sqm |
| 3 | 1.02 | M&L for preparation of new surfaces of gypsum board for false ceiling and applying two coats of oil emulsion distemper complete all as specified and directed. | BI01010001010000000000000515BI0100001114 | 10 | Sqm |
| 4 | 1.03 | Demolition of cement concrete ( unreinforced) ground floors and pavings n.exc 15cm thick below or above ground level complete all as specified and directed . | BI01010001010000000000000515BI0100001115 | 10 | Cum |
| 5 | 1.04 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified. | BI01010001010000000000000515BI0100001116 | 10 | Sqm |
| 6 | 1.05 | M&L for 25mm thick cement concrete type B-0. 1:2:4 (12.5mm graded aggregate) as in sub base of floor tiles or roof surfaces all as specified and directed. | BI01010001010000000000000515BI0100001117 | 10 | Sqm |
| 7 | 2 | S&F for Vitrified ceramic tiles Dark shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laying floor finishes over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. | BI01010001010000000000000515BI0100001118 | 10 | Sqm |
| 8 | 3 | M&L for glazed ceramic tiles coloured ,Glazed ceramic tiles in vertical surface 450X 300X 7mm thick mm thick as on walls over and incl 10mm thick rendering in cement mortar (1:4) and jointing in neet slurry and pointing in coloured cement to match the inside of tiles all complete as specified and directed. | BI01010001010000000000000515BI0100001119 | 10 | Sqm |
| 9 | 4 | M&L Granite (of any type) work 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. | BI01010001010000000000000515BI0100001120 | 10 | Sqm |
| 10 | 5 | S&F 20mm thick Granite of any type work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 10mm thick rendering in CM 1:4 complete all as specified and directed. | BI01010001010000000000000515BI0100001121 | 10 | Sqm |
| 11 | 6 | M&L for 75mm thick PCC (1:3:6) type C2 (40 mm graded stone agg) as in plinth protection, finished even and smooth without using extra cement,complete all as specified and directed. | BI01010001010000000000000515BI0100001122 | 10 | Sqm |
| 12 | 7 | Demolition of brick work or stone boulders masonry built in cement mortor or cement lime mortor including all quoins arches pillars etc., but excluding ashlar facing dressed stone work and precast concrete articles, complete all as specified and directed. | BI01010001010000000000000515BI0100001123 | 10 | Cum |
| 13 | 8 | M&L for Brick work with sub class “B” Bricks built in cement mortar 1:4 straight on plan using old size bricks all as specified and directed. | BI01010001010000000000000515BI0100001124 | 10 | Cum |
| 14 | 9 | Taking down of cement plaster on brick walls etc incl hacking out joints for key, scrubbing down with water etc complete all as specified and directed. | BI01010001010000000000000515BI0100001125 | 10 | Sqm |
| 15 | 10 | M&L for 15mm thick rendering on brick work or concrete surfaces of wall in CM 1:6 finished even and fair complete all as specified and directed. | BI01010001010000000000000515BI0100001126 | 10 | Sqm |
| 16 | 11 | M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces of wall in CM(1:4) surface finished even and fair with @ 200 ml WPC (liquid type) per bag of cement complete all as specified and directed.\nNote:-WPC (liquid type) shall be measured and paid separately as supply only. | BI01010001010000000000000515BI0100001127 | 10 | Sqm |
| 17 | 12 | M&L for preparation of new plastered surfaces on walls of any height and apply two coats of plastic emulsion paint over a coat of primer over a coat of JK/Birla white wall care putty (thickness n.exc 1.5mm) on plastered surfaces of wall complete all as specified and directed. | BI01010001010000000000000515BI0100001128 | 10 | Sqm |
| 18 | 13 | M&L for preparation of old plastered surfaces on walls of any height and apply two coats of plastic emulsion paint over a coat of primer over a coat of JK/Birla white wall care putty (thickness n.exc 1.5mm) on plastered surfaces of wall complete all as specified and directed. | BI01010001010000000000000515BI0100001129 | 10 | Sqm |
| 19 | 14 | M&L for preparing new plastered or unplastered surfaces of wall, pillasters, cornices etc complete etc and applying two coats of exterior emulsion paint (Apex from Asian Paint or equivalent make as specified) complete all as specified and as directed. | BI01010001010000000000000515BI0100001130 | 10 | Sqm |
| 20 | 15 | Complete removal of existing treatment i.e. white wash ,colour wash ,distempering etc. of wall complete all as specified and directed. | BI01010001010000000000000515BI0100001131 | 10 | Sqm |
| 21 | 16 | M&L for french polishing on surfaces of any description, width or girth including cleaning and preparing the old wooden surfaces complete all as specified and directed. | BI01010001010000000000000515BI0100001132 | 10 | Sq m |
| 22 | 17 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. | BI01010001010000000000000515BI0100001133 | 10 | Sqm |
| 23 | 18 | M&L for 5.5mm thick tinted sheet glass ordinary quality and glazing with oil putty or rubber reads as required exc 0.5sqm in each pane all as specified and directed.\nMake : MODI Float | BI01010001010000000000000515BI0100001134 | 10 | Sqm |
| 24 | 19 | M&L for PCC (1:2:4) B-1, using 20 mm graded stone aggregates, as in kerb/benching/coping, bed plates, for fixing hold fast, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed. | BI01010001010000000000000515BI0100001135 | 10 | Cum |
| 25 | 20 | M&L for providing pre-cast cement concrete type B1, 1:2:4 (20mm graded aggregate) as in cover slab , RCC flatform set in CM 1:4 etc for cable duct and base for antena or similar work etc complete all as specified and directed. | BI01010001010000000000000515BI0100001136 | 10 | Cum |
| 26 | 21 | M&L for Mild steel TMT bars as in reinforcement ,6mm to 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia.complete all as specified and directed. | BI01010001010000000000000515BI0100001137 | 10 | Kg |
| 27 | 22 | M&L for Mild steel TMT bars ,5 mm to 10 mm dia as in stirrups , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia.complete all as specified and directed. | BI01010001010000000000000515BI0100001138 | 10 | Kg |
| 28 | 23 | Taking down Chowkats or frames not exc 1.5 Sqm each with shutters /without taking off shutters from the frames complete all as specified and directed.. | BI01010001010000000000000515BI0100001139 | 10 | Each |
| 29 | 24 | Taking down Chowkats or frames exc 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frames complete all as specified and directed.. | BI01010001010000000000000515BI0100001140 | 10 | Each |
| 30 | 25 | S&F Powder coated anodised aluminium sliding window with main frame of size 100mmX44mmX1.6mm thick with double track channel of heavy section size 61mmX31mmX1.5mm thick and sliding shutter of 40mmX18mmX1.5mm thick including 4mm thick sheet glass of selected quality(pin head/plain) as per site requirement including all necessary fittings such as roller, rubber beading locking arrangement clit etc. complete all as specified and directed. | BI01010001010000000000000515BI0100001141 | 10 | Sqm |
| 31 | 26 | S&F powder coated aluminium grills size cx. 4mmx4mm, 8mm thick and aperture n.exc. 80 mm width and including fixing with aluminium channel, 1 mm thick with steel screw and tint match with existing complete all as specified and as directed. | BI01010001010000000000000515BI0100001142 | 10 | Sqm |
| 32 | 27 | S&F Powder coated anodised aluminium door with door frame of size 100mmX44mmX2.5mm thick and shutter with styles 85mmX44mmX25mm thick rails 110mmX44mmX2.5mm thick incl 6mm glass of make Modi/Atul and partly/fully fixed with 12mm thick prelaminated particle board fixed with aluminium snap beading and rubber gasket. The each shutter fitted with one aluminium sliding bolt of 250mm, 02nos tower bolt 200mm , 02nos handle 150mm, and one hydraulic floor spring of approved make complete all as specified and directed. | BI01010001010000000000000515BI0100001143 | 10 | Sqm |
| 33 | 28 | S&F including fabrication of aluminium powder coated having minimum thickness of powder coating 50 micron for door/window/ventilator frame , shutters & partition including necessary jointing cleats, glazing clips, aluminium snap beading, rubber neoprene gasket, screws, dash fasteners, rawl plug for fixing of screw in wall or floor etc. aluminium sections as approved by GE complete all as specified and directed.\nNote :- (i) Builders hardware shall be measured and paid separately under respective items.\n(ii) Only weight of aluminium sections shall be measured and paid. No claim what so ever shall be entertained on this account. | BI01010001010000000000000515BI0100001144 | 10 | Kg |
| 34 | 29 | S&F 5.5mm thick (minimum) tinted glass finished with eching fixed with aluminium frame work complete all as specified and directed. | BI01010001010000000000000515BI0100001145 | 10 | Sqm |
| 35 | 30 | S&F solar control film 50micron thick non-reflective type sticked to glass panes as per manufacturer's instructions complete all as specified and directed. | BI01010001010000000000000515BI0100001146 | 10 | Sqm |
| 36 | 31 | M&L for 12mm thick prelaminated particle board, interior grade,prelaminated both with decorative choice lamination fixed with all necessary fitting, | BI01010001010000000000000515BI0100001147 | 10 | Sqm |
| 37 | 32 | S&F of Mortice lock, with handle vertical type, size 65mm 4levers complete all as specified and directed. | BI01010001010000000000000515BI0100001148 | 10 | Each |
| 38 | 33 | S&F powder coated anodised aluminium partition frame of size 101.6mmX44.5x3 on top and bottom and middle rail, vertical rail 101.6x44.5 x 3mm thick, standard channel at bottom 40x20x3mm and clip for fixing glass etc and partly/fully fixed with 12mm thick prelaminated particle board fixed with aluminium snap beading over and including all necessary fittings of approved make complete all as specified and directed. | BI01010001010000000000000515BI0100001149 | 10 | Sqm |
| 39 | 34 | S&F floor spring to aluminium door including removing the door and fixing in the same position complete all as specified and directed. | BI01010001010000000000000515BI0100001150 | 10 | Each |
| 40 | 35 | S&F rubber beading to aluminium door including removing of old beading and fixing new beading complete all as specified and directed. | BI01010001010000000000000515BI0100001151 | 10 | RM |
| 41 | 36 | S&F door closer hydraulical regulated designation No 3 Universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed cast iron body complete all as specified and directed. | BI01010001010000000000000515BI0100001152 | 10 | Each |
| 42 | 37 | S&F PVC (SWR) Pipes of 160mm dia single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. | BI01010001010000000000000515BI0100001153 | 10 | RM |
| 43 | 38 | S&F PVC (SWR) Pipes of 110mm dia single socketed in any length with rubber ring joints fixed to floor or laid in trenches complete all as specified and directed. | BI01010001010000000000000515BI0100001154 | 10 | RM |
| 44 | 39 | S&F PVC (SWR ) bends of 160mm dia single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. | BI01010001010000000000000515BI0100001155 | 10 | RM |
| 45 | 40 | S&F 110mm dia PVC (SWR) bends any radius complete all as specified and directed. | BI01010001010000000000000515BI0100001156 | 10 | Each |
| 46 | 41 | S&F 160mm dia PVC (SWR) bends any radius complete all as specified and directed. | BI01010001010000000000000515BI0100001157 | 10 | Each |
| 47 | 42 | Dismantling aluminium work including doors, gates/partition but excluding framed truss etc complete all as specified and directed. | BI01010001010000000000000515BI0100001158 | 10 | Qtl |
| 48 | 43 | S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, frame work for ceiling and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. | BI01010001010000000000000515BI0100001159 | 10 | Kg |
| 49 | 44 | M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome all as specified and directed. | BI01010001010000000000000515BI0100001160 | 10 | Sqm |
| 50 | 45 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 15mm dia complete all as specified and directed. | BI01010001010000000000000515BI0100001161 | 10 | RM |
| 51 | 46 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 20mm dia complete all as specified and directed. | BI01010001010000000000000515BI0100001162 | 10 | RM |
| 52 | 47 | S&F steel tubing 15mm bore medium grade with all fittings and fixed to wall, floor and ceiling etc complete all as specified and directed | BI01010001010000000000000515BI0100001163 | 10 | RM |
| 53 | 48 | S&F steel tubing 20mm bore medium grade with all fittings and fixed to wall, floor and ceiling etc complete all as specified and directed | BI01010001010000000000000515BI0100001164 | 10 | RM |
| 54 | 49 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing and making good, cutting not exc 10cm girth complete all as specified and directed.. | BI01010001010000000000000515BI0100001165 | 10 | RM |
| 55 | 50 | Dismantling water tanks capacity exc 500 & n.exc 1000 ltr capacity and removing to stores complete all as specified and directed. | BI01010001010000000000000515BI0100001166 | 10 | Each |
| 56 | 51 | S&F rotational moulded ploythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified of 1000 Ltr capacity complete all as specified and directed. | BI01010001010000000000000515BI0100001167 | 10 | Each |
| 57 | 52 | S&F float valve/ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe (Min. wt. 20mm -210gms) suitable for 20 mm dia Pipe complete all as specified and directed. | BI01010001010000000000000515BI0100001168 | 10 | Each |
| 58 | 53 | S&F in repair 20mm dia Gun metal globe or gate valave with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. | BI01010001010000000000000515BI0100001169 | 10 | Each |
| 59 | 54 | S&F in repair 15mm dia Gun metal globbe or gate valave with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. | BI01010001010000000000000515BI0100001170 | 10 | Each |
| 60 | 55 | S&F fancy type Stop valves/angle valve, chromium plated with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed - Bore dia of pipe 15mm complete all as specified and directed. | BI01010001010000000000000515BI0100001171 | 10 | Each |
| 61 | 56 | Supply only PVC connection 15mm size 600mm long with PTMT nut complete all as specified and directed .\n | BI01010001010000000000000515BI0100001172 | 10 | Each |
| 62 | 57 | S&F 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated , Fancy type screwed down for pipe,high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified and directed.\n | BI01010001010000000000000515BI0100001173 | 10 | Each |
| 63 | 58 | S&F as in repair 32mm brass chromimum plated bottle traps for wash basins with inlet and out let screwed for pipes or connections including necessary packing union cap complete all as specified and directed. | BI01010001010000000000000515BI0100001174 | 10 | Each |
| 64 | 59 | S&F sheet glass self assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket gurd and railing 60cm long all as specified and directed. | BI01010001010000000000000515BI0100001175 | 10 | Each |
| 65 | 60 | S&F soap dish of vitreious china, white size 160mmx160mmx190mm embedded to wall complete all as specified and as directed. | BI01010001010000000000000515BI0100001176 | 10 | Each |
| 66 | 61 | M&L for 100mm dia cast iron floor trap including 100mm dia PTMT Gratting doom including jointing to waste pipe fixed in PCC (1:2:4) type B1, complete all as specified and directed. | BI01010001010000000000000515BI0100001177 | 10 | Each |
| 67 | 62 | S&F vitreous china counter top wash hand basin, white, flat back, size 560x455mm excluding taps, waste pipe & PTMT waste coupling of 32mm dia complete all as specified and directed.\nMAKE: Parryware, Model C0483 or equivalent model of make as specified in appendix. | BI01010001010000000000000515BI0100001178 | 10 | Each |
| 68 | 63 | S&F chromium plated brass tubular towel ring fixed with CP screws and wood cleats with wall complete all as specified and directed. \nMAKE: Jaguar, Model AQN-7721 or equivalent model of make as specified in appendix. | BI01010001010000000000000515BI0100001179 | 10 | Each |
| 69 | 64 | S&F CP towel rack 600mm long with lower hangers fixed with CP screws and wood cleats with wall complete all as specified and directed. \nMake: Jaquar Cat No AQN-7781 or equivalent make as specified. | BI01010001010000000000000515BI0100001180 | 10 | Each |
| 70 | 65 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.\nMake : Modi float | BI01010001010000000000000515BI0100001181 | 10 | Each |
| 71 | 66 | Fixing only 5.5mm thick Sheet glass, ordinary quality and glazing with rubber beads in aluminium frame partition etc in square exc 0.5sqm in each pane complete all as specified and directed. | BI01010001010000000000000515BI0100001182 | 10 | Sqm |
| 72 | 67 | M&L for concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in Cement concrete 1:3:6 type C-2 - Bore of pipe 110mm complete all as specified and directed. | BI01010001010000000000000515BI0100001183 | 10 | Rm |
| 73 | 68 | M&L for cutting out slabs, brickwork or stone masonry (in alter nate course), forming tooth-ings for and bonding new work in mortar into old work, including new materials entering old wall set in cement mortar with type B1 1:2:4 (using 20mm graded stone aggregate) complete all as specified and directed. | BI01010001010000000000000515BI0100001184 | 10 | Sqm |
| 74 | 69 | (OLD SIZE BRICKS/TILES) Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in Cement 1:4 complete all as specified and directed. | BI01010001010000000000000515BI0100001185 | 10 | Sqm |
| 75 | 70 | M&L for reinforced cement concrete (nominal mix) type B1, 1:2:4 using 20mm aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. | BI01010001010000000000000515BI0100001186 | 10 | Cum |
| 76 | 71 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for Rough finished surfaces of concrete - Flat complete all as specified and directed. | BI01010001010000000000000515BI0100001187 | 10 | Sqm |
| 77 | 72 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 100cm wide complete all as specified and directed. | BI01010001010000000000000515BI0100001188 | 10 | RM |
| 78 | 73 | M&L granite tile 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white/coloured cement with admixture of pigment to match the shade of granite store including cutting and polishing etc complete over a 20mm thick screed bed cm 1:4 complete all as specified and directed. | BI01010001010000000000000515BI0100001189 | 10 | Sqm |
| 79 | 74 | M&L for rounding to edge of stone slabs one edge ,such as in steps,cooking platform, and other similar situations complete all as specified and directed. | BI01010001010000000000000515BI0100001190 | 10 | Rm |
| 80 | 75 | M&L for filleting in any position and to any shape in cement mortar 1:4 including all mitres,stops,etc and sectional area exc 25 but nexc 50 Sqcm complete all as specified and directed. | BI01010001010000000000000515BI0100001191 | 10 | Rm |
| 81 | 76 | Taking down shutters of any description exceeding 1Sqm but not exceeding 2Sqm each complete all as specified and directed. | BI01010001010000000000000515BI0100001192 | 10 | Leaf |
| 82 | 77 | S&F for coloured non skid joint free ceramic tiles 7to8 mm thick (Square/rectangular) area of each tile exceeding 0. 18sqm but not exceeding 0.38sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15mm thick screed bed or bedding layers in CM 1:4 complete all as specified and directed. | BI01010001010000000000000515BI0100001193 | 10 | Sqm |
| 83 | 78 | Refixing old steel tubing of 15mm bore and connections in new or old position (walls, ceilings, floors etc.) with provision of new fittings complete all as specified and directed. | BI01010001010000000000000515BI0100001194 | 10 | Rm |
| 84 | 79 | Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc.) with provision of new fittings complete all as specified and directed. | BI01010001010000000000000515BI0100001195 | 10 | Rm |
| 85 | 80 | S &F for fixing Vitreous China squatting pan of pattern “long pan”, size Ditto but size of 680 x 470mm white with ‘P’ or‘S” trap, front or back inlet and foot rests,any pattern (excluding flushing cistern and flush pipe) complete all as specified and directed. | BI01010001010000000000000515BI0100001196 | 10 | Each |
| 86 | 81 | S&F 15 mm bore Fancy type Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. | BI01010001010000000000000515BI0100001197 | 10 | Each |
| 87 | 82 | S&F 15 mm bore Stop valves, fancy type chromimum plated screwed down high pressure with long shank and cup (concealed type) screwed both ends for iron pipe or for unions complete all as specified and directed.. | BI01010001010000000000000515BI0100001198 | 10 | Each |
| 88 | 83 | S&F PVC (SWR) Floor trap of 75 mm outlet plain with grating including jointing with solvent cement complete all as specified and directed. | BI01010001010000000000000515BI0100001199 | 10 | Each |
| 89 | 84 | S & F PVC Connections 15 mm size with PTMP nuts of length 450mm complete all as specified and directed. | BI01010001010000000000000515BI0100001200 | 10 | Each |
| 90 | 85 | S&F 32mm dia low density polyethylene pipe (LDPE) of pressure rating @ 6Kgf per Sqcm fixed to wall complete all as specified and directed. | BI01010001010000000000000515BI0100001201 | 10 | RM |
| 91 | 86 | S&F 110mm dia bore PVC (SWR) T junction double complete all as specified and directed. . | BI01010001010000000000000515BI0100001202 | 10 | Each |
| 92 | 87 | S&F 110mm PVC (SWR) couplers complete all as specified and directed. | BI01010001010000000000000515BI0100001203 | 10 | Each |
| 93 | 88 | S&F 110mm PVC (SWR) reducer complete all as specified and directed. | BI01010001010000000000000515BI0100001204 | 10 | Each |
| 94 | 89 | S&F 110mm PVC (SWR) cowl complete all as specified and directed. | BI01010001010000000000000515BI0100001205 | 10 | Each |
| 95 | 90 | S&F 75mm dia PVC (SWR) pipes single cocketed , in any length , laid in trenches or in floors complete all as specified and directed. | BI01010001010000000000000515BI0100001206 | 10 | R M |
| 96 | 91 | S&F 75mm dia bore PVC (SWR) bends with oval access doors complete all as specified and directed.. | BI01010001010000000000000515BI0100001207 | 10 | Each |
| 97 | 92 | S&F PVC 10 ltr capacity low level flushing cistern (Flush pipe) white with inlet ball valve float and braket and 32 mm bore PVC flush pipe complete all as specified and directed. | BI01010001010000000000000515BI0100001208 | 10 | Each |
| 98 | 93 | S&F for soild PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed. | BI01010001010000000000000515BI0100001209 | 10 | RM |
| 99 | 94 | S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and botom rail on either side & as gap insert for top rail & bottom rails; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement. supplying and fixing in the frame at site with stainless steel hinges, 150mm aluminium tower bolt, 250mm aluminium sliding hasple, 100mm aluminium handle as per specification & drawing complete all as specified and directed. | BI01010001010000000000000515BI0100001210 | 10 | Sqm |
| 100 | 95 | S&F 100 mm long stainless steel Butt hinges with pin type C 21 complete all as specified and directed.. | BI01010001010000000000000515BI0100001211 | 10 | Each |
| 101 | 96 | S&F aluminium alloy 300mm anodised sliding door bolts with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast - aluminium alloy and fixed complete all as specified and directed.. | BI01010001010000000000000515BI0100001212 | 10 | Each |
| 102 | 97 | S&F 150 mm mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. | BI01010001010000000000000515BI0100001213 | 10 | Each |
| 103 | 98 | S&F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed. | BI01010001010000000000000515BI0100001214 | 10 | Each |
| 104 | 99 | S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white complete incl seat and cover, flush pipe incl all joints complete all as specified and directed. | BI01010001010000000000000515BI0100001215 | 10 | Each |
| 105 | 100 | S&F in repairs Vitreous China Ware Wash hand basin white,angle back, size 600 x 480mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand and 32mm waste coupling and bottle trap complete all as specified and directed. | BI01010001010000000000000515BI0100001216 | 10 | Each |
| 106 | 101 | M&L for health faucet with 1 Mtr Tube & Hook (BRADED TUBE) Cat No. BEA -85 complete all as specified and directed. | BI01010001010000000000000515BI0100001217 | 10 | Each |
| 107 | 102 | M&L for cutting holes in brick walls with cement mortar for inserting holdfasts and making good dismantled portion with type B1 1:2:4 (using 20mm graded stone aggregate) complete all as specified and directed. | BI01010001010000000000000515BI0100001218 | 10 | Each |
| 108 | 103 | S&F for collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed. | BI01010001010000000000000515BI0100001219 | 10 | Sqm |
| 109 | 104 | S&F 6mm thick HPL (High pressed laminates)sheet as in partion with aluminium powder coated frame for doors, partitions and ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. | BI01010001010000000000000515BI0100001220 | 10 | Sqm |
| 110 | 105 | S&F powder coated aluminium door shutters,aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, stainless steel hinges, tower bolt, anodised aluminum snap beading screws etc. complete all as specified and directed. | BI01010001010000000000000515BI0100001221 | 10 | Sqm |
| 111 | 106 | M&L for Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on both faces complete all as specified and directed. | BI01010001010000000000000515BI0100001222 | 10 | Each |
| 112 | 107 | Extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails complete all as specified and directed. | BI01010001010000000000000515BI0100001223 | 10 | RM |
| 113 | 108 | S&F for Brass handles, extruded fabricated type polished complete all as specified and directed..\n | BI01010001010000000000000515BI0100001224 | 10 | Each |
| 114 | 109 | S&F for Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and directed. | BI01010001010000000000000515BI0100001225 | 10 | Each |
| 115 | 110 | Hasp and staple, aluminium anodised hinge pin including bolt to hinge plate and fixed with screws - Size of hasp and staple 75mm complete all as specified and directed. | BI01010001010000000000000515BI0100001226 | 10 | Each |
| 116 | 111 | M&L for 1.25 mm lath steel rolling shutters, with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, push pull or manual type complete all as specified and directed. | BI01010001010000000000000515BI0100001227 | 10 | Sqm |
| 117 | 112 | Supply only liquid WPC complete all as specified and directed. | BI01010001010000000000000515BI0100001228 | 10 | Ltr |
| 118 | 113 | M&L for joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and directed. | BI01010001010000000000000515BI0100001229 | 10 | Kg |
| 119 | 114 | M&L for Cement concrete type E2, 1:5:10 as in foundations,filling and mass concrete complete all as specified and directed. | BI01010001010000000000000515BI0100001230 | 10 | Cum |
| 120 | 115 | M&L Excavating in post holes (or similar holes) each n exc 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed. | BI01010001010000000000000515BI0100001231 | 10 | Each |
| 121 | 116 | S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensilestrength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. | BI01010001010000000000000515BI0100001232 | 10 | Sqm |
| 122 | 117 | M&L for Acid resistant tiles 15mm thick vitreous ceramic, unglazed, set,jointed and pointed in chemical resistant mortar, resin type, in floors set and jointed in neat cement slurry and pointed in white or colouredcement to match over 15mm screed over 15 mm thick screed bed or bedding layers in CM 1:4 complete all as specified and directed.. | BI01010001010000000000000515BI0100001233 | 10 | sqm |
| 123 | 118 | M&L applying two coats of cement based paint on new or undecorated wall surface including preparation of surfaces complete all as specified and directed. | BI01010001010000000000000515BI0100001234 | 10 | Sqm |
| 124 | 119 | Taking down carefully existing unserviceable flame proof point wiring of any description & in any position with and including existing conduit fixed on surface with and including existing junction boxes in between the point wiring complete, including making good the disturbed surface of walls, floors, ceiling etc to match with the existing surfaces complete all as specified and directed.\nNOTE: (i) Old existing junction boxes obtained in serviceable condition from taking down of point wiring shall be re-used in the work.\n(ii) Taking down / replacement of existing fittings like switches/sockets / switch fuses / tube light fittings etc. if any, shall be measured and paid for separately under appropriate item of Schedule `A'\n | BI01010001010000000000000515BI0100001235 | 10 | Each Point |
| 125 | 120 | M&L for flame proof point wiring for one light point or one socket point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade in 20mm dia steel conduit fixed on concealed,of walls/ceiling and using 1.5 Sqmm (nominal area) stranded copper conductor single core FRLS, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly / fittings etc. complete all as specified and directed\n | BI01010001010000000000000515BI0100001236 | 10 | Each Point |
| 126 | 121 | S&F in replacement CMRI certificate LED flameproof 2x18w or next higher size tube light fitting as per IS : 2148 / 1981 & 2206 (Part-I )1984, Temperature class T-4, & made of cast aluminum alloy LM-6 having inside & outside light grey powder coating shade No 631 as per IS: 5 & one No internal earthing terminal and 02 Nos external earthings of screw of M6- size with 02 Nos plain washers heat resistant glass complete all as specified and directed. \nMake : Sudhir cat part No FF/Single 1272 or equivalent make and model of CG /Baliga.. | BI01010001010000000000000515BI0100001237 | 10 | Each |
| 127 | 122 | S&F in replacement flame proof push button 10 Amps in LM 6 metal enclosures, conforming to cat part No PBS / OA /1010-1A of make Sudhir or equivalent model of other make as specified complete all as specified & directed. | BI01010001010000000000000515BI0100001238 | 10 | Each |
| 128 | 123 | S&F flame proof, switch socket & plug combined made of aluminum alloy LM-6 having 4 pole + earth suitable for 500 volts supply and current rating of 32 Amps complete all as specified & directed. (Make/model – Sudhir cat part No. SS/187 or equivalent model of other make as specified). \n\n | BI01010001010000000000000515BI0100001239 | 10 | Each |
| 129 | 124 | Material and labour for point wiring for one light point or one fan point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor, single core, PVC insulated & unsheathed cable, 1100 volts grade in and including concealed PVC conduits (Medium grade) of size not less than 20 mm dia all as directed with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with laminated top sheet of 3 mm thick for housing of switchws, sockets, regulators etc including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed. \nNOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the conduit to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface PVC conduit/ casing & caping of suitable size fixed on ceiling surface with using PVC rawl plugs.\n(ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'.\n(iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick laminated sheet fixed with suitable brass screws and cup washers | BI01010001010000000000000515BI0100001240 | 10 | Per Point |
| 130 | 125 | Description same as per Srl item No 6 above but, point wiring for one six pin switch socket outlet combination, 15 Amps & 5 Amp (independent) with using 2.5 Sqmm (nominal area) stranded copper conductor and 2.5 Sqmm (nominal area) stranded copper conductor single core conductor, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete | BI01010001010000000000000515BI0100001241 | 10 | Each Point |
| 131 | 126 | S&F for switch socket outlet combination, multipurpose, three pin, 15 Amps & three pin 5 Amps controlled by one switch , flush type, 230 volts AC circuit complete all as specified and directed. Make: Anchor/Cona/Havels | BI01010001010000000000000515BI0100001242 | 10 | Each |
| 132 | 127 | S&F for ceiling rose surface bakelite 63.5 x 20 mm, three terminals, complete all as specified and directed. Make: Anchor/Cona/Havels | BI01010001010000000000000515BI0100001243 | 10 | Each |
| 133 | 128 | S&F for switch flush type, 5/6 Amps, single pole, one way, 230 volts AC circuit complete all as specified and directed. Make: Anchor/Cona/Havels | BI01010001010000000000000515BI0100001244 | 10 | Each |
| 134 | 129 | S&F flameproof distribution board 8 way single pole & neutral in LM-6 metal enclosures with and including 01 No MCBs single pole and neutral 40 Amps & 06 Nos MCB single pole 16 Amps `C’ series complete all as specified and directed. (Make : Cat part no MCDB-186 of Sudhir or equivalent model of other make as specified. | BI01010001010000000000000515BI0100001245 | 10 | Each |
| 135 | 130 | M&L for sub main wiring in repair using two single core PVC insulated, unsheathed stranded copper conductor cable of size 4 Sqmm of voltage rating 1100 Volts drawn in and including surface PVC conduit of dia not less than 20mm/ casing caping with standard accessories, along-with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 4 Sqmm as earth continuity conductor complete all as specified and directed.\nNOTE: Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit. | BI01010001010000000000000515BI0100001246 | 10 | RM |
| 136 | 131 | S&F surface and wall mounted LED batten ,extruded aluminium housing provided for effcient heat dissiption with polycarbonate diffuser & integrated electronic drive 20 watt and connecting the same two ceiling rose to three core PVC insulated and sheathed copper conductor 1.5 sqmm cable including all accessories and fixing arrangement for fixing the light fitting to walls / roof surface complete all as specified and directed.\nMake :Havells cat part No Enduralinearneobs 20W LED 840SPCWHor equvlaint Bajaj /CG | BI01010001010000000000000515BI0100001247 | 10 | Each |
| 137 | 132 | M&L for point wiring for one fan point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor, single core, PVC insulated & unsheathed cable, 1100 volts grade in and including conceled/Surface PVC conduit (Medium grade) of size not less than 20mm dia with sunken type pressed steel terminal box 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings/junction boxes and wiring to be terminated in pressed steel sunken boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed. \n | BI01010001010000000000000515BI0100001248 | 10 | Per Point |
| 138 | 133 | S&F Exhaust fan 300mm sweep,230 volt, single phase iron blade with louvers and making hole complete all as specified and directed. | BI01010001010000000000000515BI0100001249 | 10 | Each |
| 139 | 134 | S&F in replacement flame proof FLP Well glass light 72 W LED fittings hanging rod and clamp as per IS : 2148 / 1981 & 2206 (Part-I )1984, Temperature class T-4, & made of cast aluminum alloy LM-6 having inside & outside light grey powder coating shade No 631 as per IS: 5 & one No internal earthing terminal and 02 Nos external earthings of screw of M6- size with 02 Nos plain washers heat resistant glass complete all as specified and directed.\nMake : Sudhir Cat Part No FL/2C/1251 /Baliga/CG.. | BI01010001010000000000000515BI0100001250 | 10 | Each |
| 140 | 135 | S&F for flame proof push button rotary type switch 16 Amps in LM 6 metal enclosures, conforming to cat part No PBS / OA /1010-1A of make Sudhir or equivalent model of other make as specified complete all as specified & directed. | BI01010001010000000000000515BI0100001251 | 10 | Each |
| 141 | 136 | M&L For sub main wiring with two runs of 2.50 Sqmm single core PVC insulated unsheathed ,1100 Volt grade/Multi stranded copper conductor drawn through and including 25 mm cassing & capping and connected accessories, fixed on surface of walls/ ceiling/ wooden/plywood surface etc including one run of PVC insulated unshethed 2.5 sqmm multistranded copper cable as earth continuity conductor complete all as specified and directed.\nNote: One run of casing & capping + two runs of PVC 2.5 sqmm wire+ One run of earth continuity conductor is measured as One unit length | BI01010001010000000000000515BI0100001252 | 10 | RM |
| 142 | 137 | M&L for wooden switch board boxes for fixing switch & socket combination , multi pin,5 pin, 5Amps -04Nos in each board and fixed on plywood surface c complete all as specified and directed. | BI01010001010000000000000515BI0100001253 | 10 | Nos |
| 143 | 138 | S&F temepra plug & socket , surface mounting box, IP-66, 3P+N+E, 415V, 63 Amps with one MCB TPN 63 Amps and suitable surge protection device complete all as specified and directed by Engr-in-charge. | BI01010001010000000000000515BI0100001254 | 10 | Each |
| 144 | 139 | S&F sheet metal enclosures socket and plug top with 20 Amps, 240 Volts, MCB DP enclouser with a two pin and earth, plug top and socket complete all as directed by Eng-in-Charge. Make : Havells/CG/Anchor. | BI01010001010000000000000515BI0100001255 | 10 | Each |
| 145 | 140 | M&L for point wiring with standed copper conductor 2.5 Sqmm, 1100 Volts grade, PVC insulated, unsheathed drawn in & including ISI marked PVC cassing & capping of required sizes as indicated including all accessories and one run of PVC insulated multistranded copper conductor cable of 2.5 Sqmm wire as earth continuity conductor and GI recessed terminal boxes for accommodating 15 A switches & sockets, 3 Pin etc complete all as directed by Eng-in-Charge. Make of PVC wires : Finolex/Polycab/Havells | BI01010001010000000000000515BI0100001256 | 10 | Per Point |
| 146 | 141 | M&L for sub main wiring with two runs of 4 Sqmm single core PVC insulated, unsheathed, 1100 Volt grade, multi standed copper conductor drawn through and including 25 mm cassing capping and accessories fixed an surface of walls, ceilling floors etc including one run of PVC insulated and unsheathed cable of copper conductor of 4 sqmm single core as earth continuity wire complete all as specified and directed.\nNote :- Two runs of single core PVC insulated unsheathed cables and one run of earth continuity conductor + one run of Cassing & Capping will be messured and paid as one unit length only. | BI01010001010000000000000515BI0100001257 | 10 | RM |
| 147 | 142 | M&L for sub main wiring with three runs of 16.00 Sqmm single core PVC insulated unsheathed, 1100 Volt grade, multi standed copper conductor drawn through and including 32 mm cassing capping and accessories fixed an surface of walls , ceiling floors etc including one run of PVC insulated,unsheathed multistranded copper conductor of 16 sqmm single core cable as earth continuity wire complete all as specified and directed.\nNote :- Two runs of single core PVC insulated unsheathed cables + one run of earth continuity conductor + one run of Cassing & Capping will be messured and paid as one unit length only. | BI01010001010000000000000515BI0100001258 | 10 | RM |
| 148 | 143 | S&F in repair Flexitron VIVA' LED batten fitting 20 watt including all accessories, pre-wired and connecting the same to ceiling rose with & including three core PVC insulated and sheathed copper conductor 1.5 sqmm cable with all accessories and fixing arrangement for fixing the light fitting to walls / roof surface complete all as specified and directed. \n | BI01010001010000000000000515BI0100001259 | 10 | Each |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
