| 1 | 1 | Material and labour for providing rolled mild steel sections in structural steel work as in purlins and similar items including distance pieces conforming to grade Fe-290 Gde E-165 including dismantling old mild steel work all as specified and directed. | | 50 | Kg |
|---|
| 2 | 2 | Material and labour for providing rolled mild steel sections in Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 including dismantling old mild steel work all as specified and directed. | | 50 | Kg |
|---|
| 3 | 3 | Material and labour for providing mild steel sections like flat iron etc as in wind ties for roof including securing bolts, cutting tops to shape, drilling holes bolting or riveting etc and similar work including dismantling old mild steel work conforming to Fe-290 Gde E-165 all as specified and directed. | | 20 | Kg |
|---|
| 4 | 4 | Material and labour for providing pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws including dismantling old AC sheets (any type) complete as specified and directed. | | 45 | Sqm |
|---|
| 5 | 5 | Material & Labour for preparing previously treated (old) steel surfaces of any description not otherwise described for over 10cm width or girth and applying two coats of synthetic enamel paint all as specified and directed. | | 60 | Sqm |
|---|
| 6 | 6 | Material & Labour for preparing new or previously untreated steel surfaces of any description not otherwise described for over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified and directed. | | 20 | Sqm |
|---|
| 7 | 7 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for all as specified and directed.\nNOTE: Credit shall be accounted for old steel reinforcement. | | 6.5 | Cum |
|---|
| 8 | 8 | Material and labour for use & waste of steel formwork to faces of drain walls, retaining walls, abutments, parapets and staircase railings & similar work including attached pillasters, buttresses, etc.; vertical or to batter fair finished surfaces of concrete all as specified and directed. | | 30 | Sqm |
|---|
| 9 | 9 | Material & Labour for providing Mild steel TMT bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. | | 700 | Kg |
|---|
| 10 | 10 | Material & Labour for providing Reinforced cement concrete M25 (Design mix) (using 20mm graded stone aggregates) in Walls, retaining walls, drain, water tank base, basement walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed. | | 6.5 | Cum |
|---|
| 11 | 11 | Supply & Fix in repairs 150mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors as in drain pipe all as specified and directed. | | 30 | RM |
|---|
| 12 | 12 | Supply & Fix in repairs 150mm dia PVC (SWR) bends with access door any radius for drain pipe all as specified and directed. | | 5 | Each |
|---|
| 13 | 13 | Demolition of concrete in ground floor (unreinforced) of any position not otherwise specifically provided all as specified and directed. | | 28.75 | Cum |
|---|
| 14 | 14 | Material & Labour for providing PCC 1:2:4 type B1 (using 20mm graded stone aggregates) as in surface channels and drain concrete all as specified and directed. | | 2.5 | Cum |
|---|
| 15 | 15 | Material & Labour for rendering 15 mm thick in cement mortar 1:4 on brick/ concrete surfaces of walls of any description finished even & fair including taking down cement plaster on brick / stone wall etc of any description including raking out joints hacking for key scrubbing down with water to remove dust etc all as specified and directed. | | 160 | Sqm |
|---|
| 16 | 16 | Material & Labour for preparation of old surfaces of walls including cornices pillaster etc and applying two coat of cement paint all as specified and directed. | | 450 | Sqm |
|---|
| 17 | 17 | Material & Labour for preparation of new plastered surfaces of wall including cornices pillaster etc and applying two coats of cement paint all as specified and directed. | | 75 | Sqm |
|---|
| 18 | 18 | Material & Labour for providing 150mm thick Cement concrete type A-1, 1:1.5:3 (using 20mm graded stone aggregates) as in floors and paving, finished even and smooth without using extra cement complete all as specified and directed. | | 180 | Sqm |
|---|
| 19 | 19 | Material & Labour for forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed. | | 2 | X-Rm |
|---|
| 20 | 20 | Material & Labour for forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed. | | 1.5 | X-Rm |
|---|
| 21 | 21 | Material & Labour for preparing new or previously untreated surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (Ivory/Black/white tint) over a coat of primer on concrete surfaces of floor & wall all as specified and directed. | | 1110 | Sqm |
|---|
| 22 | 22 | Material & Labour for providing second class hardwood timber (wrought) framed and fixed in repairs for false ceiling framing complete all as specified and directed. | | 2.7 | Cum |
|---|
| 23 | 23 | Material and labour for providing second class hardwood sectional area n exc 3 Sqcm as in plain fillets for beading etc, square, rectangular or triangular in section, clean sawn, secured with nails or brads all as specified and directed. | | 450 | Rm |
|---|
| 24 | 24 | M&L for preparation of surfaces of wood and wood based materials, new or old, of any description and girth not otherwise described and treated with two coats of creosote oil all as specified and directed. | | 100 | Sqm |
|---|
| 25 | 25 | M&L for 6mm thick Non asbestos fibre cement building board fixed or laid/inserted to timber/GI/Aluminium framework with screws including taking down old boards any type with cover fillets all as specified and directed. | | 160 | Sqm |
|---|
| 26 | 26 | M&L for preparing new or previously untreated surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint (white) over a coat of primer on non asbestos fibre cement building boad as on ceiling all as specified and directed. | | 160 | Sqm |
|---|
| 27 | 27 | Taking down window chowkats or frames with glazing shutter (without taking out shutter from frame ) area not exc 1.50sqm each all as specified and directed. | | 2 | Each |
|---|
| 28 | 28 | S&F 2nd class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed. | | 0.12 | Cum |
|---|
| 29 | 29 | S&F 30mm thick second class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred brads for securing glass, etc for windows, ventilators provided with stiles and rails as specified in SSR Part-I section 8 clause 8.24 (b) all as specified and directed. | | 4.5 | Sqm |
|---|
| 30 | 30 | S&F 100mm butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 all as specified and directed. | | 12 | Each |
|---|
| 31 | 31 | Supply and fixed aluminium anodised handles, cast type of size 125mm all as specified and directed. | | 6 | Each |
|---|
| 32 | 32 | S&F 100 mm long brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed all as specified and directed. | | 12 | Each |
|---|
| 33 | 33 | S&F Rough cast wired glass, 6.4mm thick and glazing with oil putty in square or wooden beading in square or rectengular area n. exc 0.5 sqm of each pan all as specified and directed. | | 10 | Sqm |
|---|
| 34 | 34 | S&F Expanded metal, steel wire fabric (weight not exceeding 4 kg/sqm) cut to length, bend to shap required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members all as specified and directed. | | 24 | Kg |
|---|
| 35 | 35 | M&L for preparing old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint all as specified and directed. | | 80 | Sqm |
|---|
| 36 | 36 | M&L for preparing new or previously untreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer all as specified and directed. | | 20 | Sqm |
|---|
