Supply And Fixing Of Open Gym Equipments At Beside Of Gollagudem Edga Park In Divn No. 8 Of Khammam Municipal Corporation
Tender Value
7.27 Lakhs
Estimated cost
Bid Submission
21 Jan 2020
0 days left
EMD
7300
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
KHAMMAM → Telangana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Supply And Fixing Of Open Gym Equipments At Beside Of Gollagudem Edga Park In Divn No. 8 Of Khammam Municipal Corporation:-1 Cc Mixer 2 Jcb Excavator 3 Tippers 4 Pan Vibrators 5 Pin Vibrators 6 Water Tankers 7 Weigh Batcher 8 Electric Generator 9 Steel Centering
BOQ
| S.No | Subwork Name | Specification Number | Quantity | UOM | Rate(INR) | Amount(INR) |
|---|---|---|---|---|---|---|
| 1 | NIT 15/21 | CM (1:4) | 102.60 | 10 Sqm | 1703.80 | 17481.00 |
| Plastering with CM(1:4) prop 12mm thick including C & C of all materials, Labour charges etc., completed | ||||||
| 2 | NIT 15/21 | CM 1:6 | 9.32 | 1 Cun | 6689.11 | 62309.00 |
| Construction of curb with brick masnory in CM 1:6 prop with flyash solid bricks including C & C of all materials, Labour charges etc., completed | ||||||
| 3 | NIT 15/21 | Precat Terrazo | 168.75 | Sqm | 767.36 | 129429.00 |
| Supply and Delivery and laying of precast terrazo chequered tiles confirming to IS 3801 using CM(1:6) base coat of 12mm cement slurry at 33 kg/ sqmt, cement jointng etc., completed | ||||||
| 4 | NIT 15/21 | PCC (1:5:10) | 16.88 | 1 Cum | 4208.05 | 71011.00 |
| PCC (1:5:10) pro.(nominal mix) Using 20/40mm HG metal including cost and conveyance of all materials, mixing., laying ,tamping,curing,labour charges etc., completed | ||||||
| 5 | NIT 15/21 | Wet Mix | 2.83 | 1 Cum | 6205.75 | 14745.00 |
| Construction of un-reinforced, plain cement concrete pavement with M30 grade mix, thickness as per design, over a prepared sub base, with 53 grade opc cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity, laid in approved fixed side formwork (steel channel, laying , steel plates including levelling the formwork ), spreading the concrete with shovels, rakes, compacted using plate vibrator and finished in continuous operation including provision of contraction and expansion, construction joints, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per Technical Specification Clause 1501 MORD. | ||||||
| 6 | NIT 15/21 | Earth Wortk | 19.25 | 10 Cum | 2300.42 | 4429.00 |
| Earth Work excavation and depositing on bank with an intial lead of10Mts and lift of 2 Mts in all soils including Labour charges etc. completed. | ||||||
| 7 | NIT 15/21 | Thaichi Spinner | 1.00 | Each | 34000.00 | 34000.00 |
| Supply and fixing of Thaichi Spinner (4) Wheel materials and labour charges including transportation charges etc. completed. (Product code FFI-11) | ||||||
| 8 | NIT 15/21 | Air Walker | 1.00 | Each | 28000.00 | 28000.00 |
| Supply and fixing of Air Walker / Arm Strebgther materials and labour charges including transportation charges etc. completed. (Product code FFI-10) | ||||||
| 9 | NIT 15/21 | Waist Trrauber | 1.00 | Each | 48000.00 | 48000.00 |
| Supply and fixing of 3-Person Waist Trrauber (SittingTwister) materials and labour charges including transportation charges etc. completed. (Product code FFI-09) | ||||||
| 10 | NIT 15/21 | Leg Press Machine | 1.00 | Each | 36000.00 | 36000.00 |
| Supply and fixing of Leg Press Machine/Single Pole Sit Pedal Devicematerials and labour charges including transportation charges etc. completed. (Product code FFI-08) | ||||||
| 11 | NIT 15/21 | Waist Trrauber | 1.00 | Each | 41000.00 | 41000.00 |
| Supply and fixing of 3-Person Waist Trrauber (Standing Twister) including cost and conveyance all materials and labour charges including transportation charges etc. completed. (Product code FFI-07) | ||||||
| 12 | NIT 15/21 | Rowing Machine | 1.00 | Each | 37000.00 | 37000.00 |
| Supply and fixing of Rowing Machine/Rower including cost and conveyance all materials and labour charges including transportation charges etc. completed. (Product code FFI-06) | ||||||
| 13 | NIT 15/21 | Elliptical Machine | 1.00 | Each | 39900.00 | 39900.00 |
| Supply and fixing of Elliptical Machine including cost and conveyance all materials and labour charges including transportation charges etc. completed. (Product code FFI-05) | ||||||
| 14 | NIT 15/21 | Big Arm Wheel | 1.00 | Each | 35000.00 | 35000.00 |
| Supply and fixing of Big Arm Whell/Shoulder Wheel including cost and conveyance all materials and labour charges including transportation charges etc. completed. (Product code FFI-04) | ||||||
| 15 | NIT 15/21 | Air Walker | 1.00 | Each | 38600.00 | 38600.00 |
| Supply and fixing of Air Walker / Ski Walker including cost and conveyance all materials and labour charges including transportation charges etc. completed. (Product code FFI-03) | ||||||
| 16 | NIT 15/21 | Pull Chair | 1.00 | Each | 53500.00 | 53500.00 |
| Supply and fixing of Pull Chair/Dual Chest Press including cost and conveyance all materials and labour charges including transportation charges etc. completed. (Product code FFI-02) | ||||||
| 17 | NIT 15/21 | Single Air Walker | 1.00 | Each | 37500.00 | 37500.00 |
| Supply and fixing of single air walker/surf board/ stepper cost and conveyance all materials and labour charges including transportation charges etc. completed. (Product code FFI-01) |
AI Tender Summary
Tender Timeline
Jan 01, 1900
11:30 IST
Tender Published
Tender notice published.
CompletedJan 21, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender