Tender For Fabrication And Replacement Of Msrl Phosphoric Acid Lines With Ss 316L / Hv9 Pipes , Inside Pa Plant Area , Fact Cd ., AMBALAMEDU-Kerala

Tender For Fabrication And Replacement Of Msrl Phosphoric Acid Lines With Ss 316L / Hv9 Pipes , Inside Pa Plant Area , Fact Cd . , Tender For Fabrication And Replacement Of Msrl Phosphoric Acid Lines With Ss 316L / Hv9 Pipes , Inside Pa Plant Area , Fact Cd . , Fabrication Of Pipeline And Fitting With Ss 316 L / Hv9 Material , Size Varies From 50 Nb To 350 Nb . [ Scope Of Work , As Specified In Note No . 01 Of Special Condition Of Contract Is Also Included In This Activity . ] The Required Materials Shall Be Transported From Store / Site . New Pipes , Fitting , Special Fittings Etc . Shall Be Fabricated With Ss 316 L / Hv9 Material . The Required Mitre Bends / Mitre Fittings Shall Also Be Fabricated To Suit The Site Conditions In Hv9 / Ss 316L Material . Elbows And Tees Shall Be Fabricated In Addition With The Available Ss 316L / Hv9 Pipes . The Ss 316 L / Hv9 Pipes Shall Be Cut By Plasma Cutting Machine , In To 2 M Or Nearest Length As Per Instructions To Avoid Wastage . Pipe Ends Shall Be Ground Properly And Take Suitable Bevel / Single Vee . The Pipes / Fittings / Mitres Shall Be Fabricated By Tig Welding Only With Stub Ends , M . S . Slip On Flanges . Pipes Shall Be In Pieces Or In Full Pipe Length ( 5 . 7 To 6M ) As Per Instructions From Engineer In Charge . , Erection Of Fabricated Ss 316 L / Hv9 Pipe And Fittings Of Sizes 50 Nb To 350 Nb . [ Scope Of Work , As Specified In Note No . 01 Of Special Condition Of Contract Is Also Included In This Activity . ] The Newly Fabricated Ss 316 L / Hv9 Pipe Lines With Fittings Shall Be Transported To Site , At Various Elevations . The Ss 316 L / Hv9 Pipes With Fittings Shall Be Erected / Fixed In Position With Proper Gaskets And Fasteners . Flange Joints Shall Be Tightened Properly To Avoid Any Leakage . , Fabrication Of Stub End Rings From Ss 316L / Hv9 Plates , Size 50Nb To 350 Nb . The Required Stub End Rings [ Size 50 Nb To 350 Nb ] Shall Be Marked And Cut From Ss 316L / Hv9 Plates [ 8 To 12Mm Thick For Ss316l And 5Mm / 8Mm Thick For Hv9 ] By Using Plasma Cutting Machine . The Rings Shall Be Transported To Fact Cd Work Shop For Final Machining And Back To Site . Ring Edges Shall Be Ground Properly And Take Suitable Bevel / Single Vee . 12 / 10 Mm Scrap Ss 316L Plates Shall Be Made Use For Cutting Stub Ends . Transportation Of These Plates From Np Backyard Is Under Contractors Scope . , Dismantling Of Old Rubber Lined Pipes Size 50 Nb To 350 Nb . The Existing Rubber Lined Pipes And Fittings , At Various Elevations / Pipe Bridges Shall Be Dismantled / Removed As Per The Instructions Of Engineer-In -Charge . The Usable Pipes Shall Be Transported / Stacked At Specific Location And Scrap To Scrap Yard .

Refer document

INR 12000.0 /-

Refer document