Tender For Electrical Workshop Items As Per Nit, Multilocation-Uttar Pradesh

Tender For Electrical Workshop Items As Per Nit - 2 Precise Multi-Meter 3 Leakage Clamp Meter ( Ac / Dc Ma Current Measurement ) 4 Digital Clamp Meter Ac / Dc 5 0-1000 Amp 6 Digital Micro Ohm Meter 7 Lcrq Meter 8 Primary Current Injection Test Kit 9 Secondary Current Injection Test Set 10 Universal Protection Relay Test System ( ( 2 Current + 2 Voltage Channel ) 11 Oil Filtration Machine Along With Separate Bdv Test Kit 12 Auto Transformer ( Variac ) 13 Single Phase Auto Transformer 14 Three Phase Auto Transformer 15 Non- Contact High Voltage Detector 16 Non-Contact High Voltage Detector For 33Kv 17 Non-Contact High Voltage Detector For 132Kv 18 Circuit Breaker Analyzer System 19 Vacuum Interrupter Tester 20 Partial Discharge Test Set 21 70 Kv Ac / Dc Hipot Test Set 22 Three Phase Power Analyser ( For Motor Upto 180 Kw ) 23 Battery Charge Discharge Set 24 Battery Analyser 25 Sound Level Meter 26 Ht Megger ( Regular ) - Up To 10 Kv 27 Lt Megger ( Regular ) - 50 To 1000V 28 Earth Megger ( Regular ) 29 Oscilloscope ( 4 Channel ) 30 Non-Contact Tachometer 31 Regulated Dc Power Supply ( Upto 220V Dc ) 32 Phase Sequence Meter 33 Stroboscope 34 Temperature Gun ( Non Contact Type ) 35 Elcb Tester 36 Scope Meter 37 Vibration Pen 38 Thermography Camera 39 Dc Earth Fault Locator 40 Discharge Rod 41 Milli Amps Tong Tester 42 Contact Resistance Kit 43 Motor Checker 44 Oven For Motor Heating 45 Tong Tester 46 Null Deflection Meter / Galvanometer 47 Dc Voltmeter Range 0-.3-1-3-10 V Substandard Meter 48 Dc Volt Meter 0-30-100-300-1000 V Substandard Meter 49 Dc Ampere Meter Yew Make Range 0-30-100 A Substandard Meter 50 Lux Meter 51 Crimping Tool 52 Hand Operated ( 2.5 To 400Sq Mm ) 53 Hydraulic ( 120-1000Sqmm ) 54 Hand Drill Machine ( 230Vac ) 55 Torque Wrench ( 12-68 Nm Make: Reputed ) 56 Digital Vernier Calipers ( Battery Operated Hand Tool ) 57 B. All Related Services N 58 Unloading At Site, Handling, Transportation To Store And From Store To Respective Workshop Building, Storage At Site, Assembly At Site, Installation, Testing, Pre-Commissioning, Hook-Up, Touch Up Painting, Commissioning, Performance Test Run, Handing Over To Client And Other Field Works Including All Civil-Structural Work For The Abocve Listed Items, As Per The Enclosed Technical Specification ( Doc. No. Pc161 / Pc164 / Pc171-Ts-0813 ) , Instructions To Vendors, Data Sheets Etc. N ( For Gorakhpur ) 59 Unloading At Site, Handling, Transportation To Store And From Store To Respective Workshop Building, Storage At Site, Assembly At Site, Installation, Testing, Pre-Commissioning, Hook-Up, Touch Up Painting, Commissioning, Performance Test Run, Handing Over To Client And Other Field Works Including All Civil-Structural Work For The Abocve Listed Items, As Per The Enclosed Technical Specification ( Doc. No. Pc161 / Pc164 / Pc171-Ts-0813 ) , Instructions To Vendors, Data Sheets Etc. ( For Sindri ) 60 Unloading At Site, Handling, Transportation To Store And From Store To Respective Workshop Building, Storage At Site, Assembly At Site, Installation, Testing, Pre-Commissioning, Hook-Up, Touch Up Painting, Commissioning, Performance Test Run, Handing Over To Client And Other Field Works Including All Civil-Structural Work For The Abocve Listed Items, As Per The Enclosed Technical Specification ( Doc. No. Pc161 / Pc164 / Pc171-Ts-0813 ) , Instructions To Vendors, Data Sheets Etc. ( For Barauni ) 61 C. Training Of Owners Personnel: N 62 Training Of Client Personnel At Each Site For 2 ( Two ) Days For Electrical Engineer / Operating Staff For Electrical Workshop Items As Listed Above At A. N ( For Gorakhpur ) 63 Training Of Client Personnel At Each Site For 2 ( Two ) Days For Electrical Engineer / Operating Staff For Electrical Workshop Items As Listed Above At A. N ( For Sindri ) 64 Training Of Client Personnel At Each Site For 2 ( Two ) Days For Electrical Engineer / Operating Staff For Electrical Workshop Items As Listed Above At A. N ( For Barauni ) 65 Rate Of Gst ( Applicable On The Total Package Price )

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	20-Jan-2020	Time Extension	Date	28-01-2020

Refer document

INR 1275000.0 /-

Refer document

Name of Work: ITEMS FOR ELECTRICAL WORKSHOP
	BoQ Sl.	Item Description (For brief specification of items refer technical specification Doc. No. PC161/PC164/PC171-TS-0813).	Item Code / Make	Quantity	Units
1	0.5	A. Design, engineering, manufacture, procurement of materials and bought out components, assembly at shop, inspection, testing at manufacturer's works, painting (primer+ finish coat),packing and supply of WORKSHOP EQUIPMENT(Electrical items) including supply of all commissioning spares, special tools & tackles (if applicable), first fill of consumables (such as oil &lubricants, coolents if applicable etc.),erection material and drawings and documents as per attached Annexure-I for all supplies and services covered as per the enclosed Scope of work, technical specification (Doc. No. PC161/PC164/PC171-TS-0813), data sheets, instructions to vendors etc. and other codes and standards attached or referred.\n (GORAKHPUR + SINDRI+ BARAUNI )	4
2	1	Precise Multi-meter	5	12	No.
3	2	Leakage Clamp Meter (AC/DC mA current measurement)	6	3	No.
4	3	Digital Clamp Meter AC/DC	7
5	3.1	0-1000 Amp	8	12	Nos.
6	4	Digital Micro ohm meter	9	6	Nos.
7	5	LCRQ Meter	10	3	No.
8	6	Primary Current Injection Test Kit	11	3	No.
9	7	Secondary Current Injection Test Set	12	3	No.
10	8	Universal Protection Relay Test System ((2 Current + 2 Voltage channel)	13	1	No.
11	9	Oil Filtration Machine along with Separate BDV Test Kit	14	3	No.
12	10	Auto Transformer (VARIAC)	15
13	10.1	Single Phase Auto Transformer	16	3	No.
14	10.2	Three Phase Auto Transformer	17	3	No.
15	11	Non- Contact High Voltage Detector	18
16	11.1	Non-Contact High Voltage Detector for 33KV	19	3	No.
17	11.2	Non-Contact High Voltage Detector for 132KV	20	3	No.
18	12	Circuit Breaker Analyzer System	21	3	No.
19	13	Vacuum Interrupter Tester	22	3	No.
20	14	Partial Discharge Test Set	23	3	No.
21	15	70 KV AC/DC Hipot Test Set	24	3	No.
22	16	Three Phase Power Analyser (for motor Upto 180 KW)	25	3	No.
23	17	Battery Charge Discharge Set	26	3	No.
24	18	Battery Analyser	27	3	No.
25	19	Sound Level Meter	28	6	Nos.
26	20	HT Megger (Regular ) - up to 10 KV	29	6	Nos.
27	21	LT Megger (Regular ) - 50 to 1000V	30	12	Nos.
28	22	Earth Megger (Regular )	31	6	Nos.
29	23	Oscilloscope ( 4 Channel)	32	3	No.
30	24	Non-Contact Tachometer	33	6	Nos.
31	25	Regulated DC Power Supply (upto 220V DC)	34	6	Nos.
32	26	Phase sequence meter	35	6	Nos.
33	27	Stroboscope	36	3	No.
34	28	Temperature Gun (non contact type)	37	12	Nos.
35	29	ELCB tester	38	6	Nos.
36	30	Scope Meter	39	6	Nos.
37	31	Vibration Pen	40	6	Nos.
38	32	Thermography Camera	41	3	No.
39	33	DC Earth Fault Locator	42	3	No.
40	34	Discharge Rod	43	9	Nos.
41	35	Milli Amps Tong Tester	44	6	Nos.
42	36	Contact Resistance Kit	45	3	No.
43	37	Motor Checker	46	9	Nos.
44	38	Oven For Motor Heating	47	3	No.
45	39	Tong Tester	48	6	Nos.
46	40	Null Deflection Meter/ Galvanometer	49	6	Nos.
47	41	DC Voltmeter range 0-.3-1-3-10 V Substandard meter	50	6	Nos.
48	42	DC Volt meter 0-30-100-300-1000 V Substandard meter	51	6	Nos.
49	43	DC Ampere meter YEW make range 0-30-100 A Substandard meter	52	6	Nos.
50	44	Lux Meter	53	3	No.
51	45	Crimping Tool	54
52	45.1	Hand Operated(2.5 to 400Sq mm)	55	9	Nos.
53	45.2	Hydraulic (120-1000Sqmm)	56	9	Nos.
54	46	Hand Drill Machine (230VAc)	57	6	Nos.
55	47	Torque Wrench (12-68 Nm make: Reputed)	58	15	Nos.
56	48	Digital Vernier Calipers (Battery Operated hand tool)	59	3	No.
57	49	B. ALL RELATED SERVICES\n	60
58	50	Unloading at site, handling, transportation to store and from store to respective workshop building, storage at site, assembly at site, installation, testing, pre-commissioning, hook-up, touch up painting, commissioning, performance test run, handing over to client and other field works including all civil-structural work for the abocve listed items, as per the enclosed technical specification (Doc. No. PC161/PC164/PC171-TS-0813), instructions to vendors, data sheets etc.\n(FOR GORAKHPUR)	61	1	Lump sum
59	51	Unloading at site, handling, transportation to store and from store to respective workshop building, storage at site, assembly at site, installation, testing, pre-commissioning, hook-up, touch up painting, commissioning, performance test run, handing over to client and other field works including all civil-structural work for the abocve listed items, as per the enclosed technical specification (Doc. No. PC161/PC164/PC171-TS-0813), instructions to vendors, data sheets etc.(FOR SINDRI)	62	1	Lump sum
60	52	Unloading at site, handling, transportation to store and from store to respective workshop building, storage at site, assembly at site, installation, testing, pre-commissioning, hook-up, touch up painting, commissioning, performance test run, handing over to client and other field works including all civil-structural work for the abocve listed items, as per the enclosed technical specification (Doc. No. PC161/PC164/PC171-TS-0813), instructions to vendors, data sheets etc.(FOR BARAUNI)	63	1	Lump sum
61	53	C. Training of Owner's personnel:\n	64
62	54	Training of client Personnel at each site for 2(TWO) days for Electrical engineer/operating staff for electrical workshop items as listed above at A.\n(FOR GORAKHPUR)	65	1	Lump sum
63	55	Training of client Personnel at each site for 2(TWO) days for Electrical engineer/operating staff for electrical workshop items as listed above at A.\n(FOR SINDRI)	66	1	Lump sum
64	56	Training of client Personnel at each site for 2(TWO) days for Electrical engineer/operating staff for electrical workshop items as listed above at A.\n(FOR BARAUNI)	67	1	Lump sum
65	57	Rate of GST (Applicable on the Total Package Price)	68	1	%